ASUS RS100-E7-PI2, e6721 User Manual

RS100-E7/PI2
12
Conguration Guide
E6721
First Edition V1
July 2011
Copyright © 2011 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS provides this manual “as is” without warranty of any kind, either express or implied, including but not
limited to the implied warranties or conditions of merchantability or tness for a particular purpose. In no event shall ASUS, its directors, ofcers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of prots, loss of business, loss of use or data,
interruption of business and the like), even if ASUS has been advised of the possibility of such damages arising from any defect or error in this manual or product.
Specications and information contained in this manual ae furnished for informational use only, and are
subject to change at any time without notice, and should not be construed as a commitment by ASUS. ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual, including the products and software described in it.
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.
II
Contents
Revision history .......................................................................................... III
Safety information ...................................................................................... IV
Chapter 1: Product introduction
1.1 Key features .................................................................................. 1-2
1.2 System overview .......................................................................... 1-3
1.3 Front panel features ..................................................................... 1-4
1.4 Rear panel features ...................................................................... 1-4
1.5 Systemspecications ................................................................. 1-5
Chapter 2: Components
2.1 Upgrading CPU and CPU heatsink ............................................. 2-2
2.2 Upgrading system memory ......................................................... 2-3
2.3 Upgrading hard disk drives ......................................................... 2-4
2.4 Installing ASUS Server Management Board .............................. 2-6
2.5 Rackmount rail kit ........................................................................ 2-8
2.6 OS support list ............................................................................. 2-9

Revision history

Revision Revision history Date
V1 First release of RS100-E7/PI2 conguration guide July 2011
III

Safety information

Electrical Safety
Before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged.
To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
When adding or removing any additional devices to or from the system, contact
a qualied service technician or your dealer. Ensure that the power cables for
the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you service.
If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your dealer.
Operation Safety
Servicing of this product or units is to be performed by trained service personnel only.
Before operating the server, carefully read all the manuals included with the server package.
Before using the server, ensure all cables are correctly connected and the power cables are not damaged. If any damage is detected, contact your dealer as soon as possible.
To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Place the server on a stable surface.
This product is equipped with a three-wire power cable and plug for the user’s
safety. Use the power cable with a properly grounded electrical outlet to avoid electrical shock.
Lithium-Ion Battery Warning
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
CD-ROM Drive Safety Warning
CLASS 1 LASER PRODUCT
Heavy System
CAUTION! This server system is heavy. Ask for assistance when moving or carrying the system.
IV
Chapter 1
This chapter describes the key
features of RS100-E7/PI2. It includes
the product overview and general
specications.
Product introduction
1-

1.1 Key features

Ultra-Quiet Rack Server
Provides excellent acoustic control (under 29dBA), which is even lower than a
projector.
Facilitate customers with quiet working environment.
Excellent Thermal Design
Heat-pipe for cooing efciency.
Lower acoustic level and power saving.
Maximin Storage
Highly compacted size of 15” depth for space saving.
Two 3.5 HDD Supported with RAID.
Flexible Rack Selections
Short Chassis Can Widen Your Selections on Rack and Cabinet.
More Capacity in Data Center with Short Rack.
Not only save your cabinet space, but increase density on cabinet
Remote Management Solution
Easy maintenance, friendly GUI, 7x24 real time management.
Energy saving
80Plus PSU for optimal power efciency.
High power efciency fan.
Intelligent fan control technology.
ASUS proprietary CPU heat-pipe.
Chapter 1: Product introduction1-2

1.2 System overview

4
5
6
8
1
2
7
3
9
9
Items Items
1. Central processing unit (CPU) 6. Optical disk drive
2. CPU heatsink 7. Riser card
3. System memory 8. ASUS Server management board (optional)
4. Hard disk drivesHard disk drives 9. Rackmount rail kit (optional)
5. HDD bracketHDD bracket
ASUS RS100-E7/PI2 1-3

1.3 Front panel features

12
Message LED
USB 2.0 ports
Optical drive
HDD Access LED
Turn off the system power and detach the power supply before removing or replacing any system component.

1.4 Rear panel features

LAN2 LED
LAN1 LED
Power LED
Power button
Reset button
AC power socket
USB 2.0 ports
PS/2 mouse port
PS/2 keyboard port
Serial port
LAN port 3*
VGA port
LAN port 1
LAN port 2
Expansion slot
The ports for the PS/2 keyboard, PS/2 mouse, USB, VGA, and Gigabit LAN
do not appear on the rear panel if motherboard is not present.
*The port is for ASUS ASMB4-iKVM controller card only.
Chapter 1: Product introduction1-4
1.5 Systemspecications
Model Name RS100-E7/PI2
1 x Socket LGA1155
Processor / System Bus
Core Logic
ASUS Features
Memory
Expansion Slots
Storage
HDD Bays
Networking LAN Graphic VGA
Auxiliary Storage FDD / CD / DVD
Onboard I/O
Smart Fan ASWM2.0 Total Slots
Capacity
Memory Type Memory Size Total PCI/PCI-X/
PCI-E Slots Slot Type
I = internal A or S = hot­swappable
Intel® Xeon® E3-1200 Processor Family Intel® CoreTM i3-2100 Processor Family
Intel® C204 Chipset
√ √ 4 (2 Channels) Maximum up to 32GB
Do not support R-DIMM and non ECC U-DIMM DDR3 1333 / 1066 Unbuffered DIMM with ECC 1 GB, 2GB, 4GB, 8GB
1
1 x PCI-E 2.0 x16 slot (x16 link) (Full-Height/HL) 2 x SATA3 6Gb/s
Intel® C204 (for Windows only)
- Supports software RAID 0 & 1
2 x Internal 3.5” SATA2 HDD Bays
2 x Intel® 82574L + 1 x Mgmt LAN
Aspeed® AST2050 16MB
1 x Slim-type Optical Device Bay (Options: No ODD / DVD-ROM / DVD-RW)
1 x External Serial Port
3 x RJ-45 ports (1 for ASMB5-iKVM) 4 x USB 2.0 ports (Front x 2, Rear x 2)
1 x VGA port
1 x PS/2 keyboard port 1 x PS/2 mouse port
(continued on the next page)
ASUS RS100-E7/PI2 1-5
Windows® Server 2008 R2 Windows® Server 2008 Enterprise 32/64-bit
OS Support
Windows® Server 2003 R2 Enterprise 32/64-bit RedHat® Enterprise Linux AS5.5/6.0 32/64-bit SuSE® Linux Enterprise Server 10 SP3/11 32/64-bit
(Subject to change without any notice)
Anti-virus Software
Optional anti-virus CD Pack
Out of Band Management Solution
Remote
Hardware
Software Net Weight Kg (CPU, DRAM & HDD not inclu ded)
Dimension (DD x WW x HH) Power Supply Power Rating
Optional ASMB5-iKVM for KVM-over-IP support
ASUS ASWM Enterprise
6.5 Kg
380mm x 429.6mm x 43.2mm 220W Single Power Supply Input: 100-240Vac, 4-2A, 50-60Hz, Class I Operation temperature: 10°C–35°C / Non operation
Environment
temperature: -40°C–70°C Non operation humidity: 20%–90% ( Non-condensing)
*Specicationsaresubjecttochangewithoutnotice.
®
Chapter 1: Product introduction1-6
Chapter 2
This chapter lists the key components and optional accessories for the server system.
Components
1-

2.1 Upgrading CPU and CPU heatsink

1
2
3
4
5
7
6
7
6
The ASUS RS100-E7/PI2 supports one Dual-core / Quad-core Intel
Xeon® series processor.
®
LGA1155
Order P/N Description
90-S000U09Y1T (single pack) Quad Core Intel Xeon E3-1220 3.1G 90-S000U0A21T (single pack) Quad Core Intel Xeon E3-1230 3.1G 90-S000U0A41T (single pack) Quad Core Intel Xeon E3-1240 3.1G 90-S000U0A71T (single pack) Quad Core Intel Xeon E3-1270 3.1G 90-S000U0A91T (single pack) Quad Core Intel Xeon E3-1280 3.1G
Chapter 2: Components2-2

2.2 Upgrading system memory

1
2
3
4
1
2
3
4
DIMM_A2
DIMM_A1
DIMM_B2
DIMM_B1
The motherboard comes with four (4) Double Data Rate 3 (DDR3) Dual Inline
Memory Modules (DIMM) slots.
Recommendedmemorycongurations
UDIMM DIMM Slot
Per Channel
2 1 Unbuffered DDR3 ECC 1066/1333
2 2 Unbuffered DDR3 ECC 1066/1333
DIMM Populated per Channel
DIMM Type Speed Rank per DIMM
Single Rank, Dual Rank
Single Rank, Dual Rank
Order P/N Description
90-S000I05L0T DDR3 1333 ECC UNB 1G Single Pack 90-S000I05M0T DDR3 1333 ECC UNB 2G Single Pack 90-S000I0570T DDR3 1333 ECC UNB 4G Single Pack
ASUS RS100-E7/PI2 2-3

2.3 Upgrading hard disk drives

1
2
The system supports two SATAII/SAS hard disk drives.
We recommend that you install identical drives of the same model and capacity
for RAID conguration.
Installing a hard disk drive to the HDD tray 1
Chapter 2: Components2-4
Installing a hard disk drive to the HDD tray 2
2
1
3
Order P/N Description
90-S000H6560T SATA2 500G 7200rpm with tray (single pack) 90-S000H6570T SATA2 1TB 7200rpm with tray (single pack) 90-S000H65D1T SATA3 500G 7200rpm with tray (single pack) 90-S000H65C1T SATA3 750G 7200rpm with tray (single pack) 90-S000H65B1T SATA3 1TB 7200rpm with tray (single pack) 90-S000H64R0T SAS 6G 300G 15Krpm with tray (single pack) 90-S000H64S0T SAS 6G 450G 15Krpm with tray (single pack) 90-S000H64T0T SAS 6G 600G 15Krpm with tray (single pack)
ASUS RS100-E7/PI2 2-5
2.4 Installing ASUS Server Management Board
ASUS Server Management Board is an Intelligent Platform Management Interface
(IPMI) 2.0-compliant board that allows users to monitor, control and manage a
remote server from the local or central server in local area network (LAN).
ASUS Server Management Board
Baseboard Management
Controller (BMC) connector
(14-pin BMC_FW1)
Chapter 2: Components2-6
ASMB5-iKVM
Remote real-time access to servers with full control by keyboard, video monitor
and mouse (KVM) of a single local computer from anywhere at any time. In
addition, KVM function is based on BIOS-level access, therefore, even the server OS is down, the KVM module can still work to provide around-the-clock remote monitor and diagnosis through GUI (Web-based Graphical User Interface).
Advanced server management functions including “remote power on/off/reset”,
“remote hardware health monitoring” and “system event log”.
Allows administrators to share the date saved in a local drive (oppy, CD/ DVD-ROM, ash device, HDD) to target servers, which makes data-sharing
convenient.
We recommend to use LAN port 3 (dedicated LAN) or LAN port 1 (shared LAN) for server management.
LAN port 3
Order P/N Description
90-C1SD80-00UAN00Z ASMB5-iKVM Module (6 in 1)
ASUS RS100-E7/PI2 2-7
LAN port 1

2.5 Rackmount rail kit

Chapter 2: Components2-8

2.6 OS support list

Operating System Version
Windows Server 2003 Standard/Enterprise 32/64 Edition SP2
Microsoft Windows
Red Hat Enterprise Linux
SuSE Linux Enterprise Server
Linux
Virtualization
Order P/N Description
90-S00SW7140T Windows® Server 2008 STD 64-bit ENG 90-S00SW7150T Windows® Server 2008 STD 64-bit TCH
Windows Server 2008 Standard/enterprise 32/64 Edition Windows Server 2008 Foundation 32/64
Windows Vista SP1 (Installation Only) Windows XP Professional SP3 (Installation Only)
RHEL AS 4.0 UP7 32/64 bit RHEL AS 5.0 UP3 32/64 bit
SLES 10 SP3 32/64 bit SLES 11 32/64 bit
Fedora Core 10 (Installation Only)
Free BSD 7.1 (Installation Only)
VMWare ESX4.0 VMWare ESX4.0i
ASUS RS100-E7/PI2 2-9
Chapter 2: Components2-10
Loading...