ROG STRIX B365-G GAMING
Motherboard
E15361
First Edition
April 2019
Copyright© 2019 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either
(1)for free by downloading it from https://www.asus.com/support/
or
(2)for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).
ii
Contents
Safety information...................................................................................................... |
vi |
About this guide......................................................................................................... |
vii |
ROG STRIX B365-G GAMING specifications summary........................................... |
ix |
Package contents..................................................................................................... |
xiii |
Installation tools and components.......................................................................... |
xiv |
Chapter 1: |
Product Introduction |
|
|
1.1 |
Motherboard overview............................................................................... |
1-1 |
|
|
1.1.1 |
Before you proceed..................................................................... |
1-1 |
|
1.1.2 |
Motherboard layout...................................................................... |
1-2 |
|
1.1.3 |
Central Processing Unit (CPU).................................................... |
1-4 |
|
1.1.4 |
System memory........................................................................... |
1-5 |
|
1.1.5 |
Expansion slots............................................................................ |
1-7 |
|
1.1.6 |
Onboard jumpers......................................................................... |
1-9 |
|
1.1.7 |
Internal connectors.................................................................... |
1-10 |
Chapter 2: |
Basic Installation |
|
|
2.1 |
Building your PC system........................................................................... |
2-1 |
|
|
2.1.1 |
CPU installation........................................................................... |
2-1 |
|
2.1.2 |
Cooling system installation.......................................................... |
2-3 |
|
2.1.3 |
Motherboard installation.............................................................. |
2-5 |
|
2.1.4 |
DIMM installation......................................................................... |
2-6 |
|
2.1.5 |
ATX power connection................................................................. |
2-7 |
|
2.1.6 |
SATA device connection.............................................................. |
2-8 |
|
2.1.7 |
Front I/O connector...................................................................... |
2-9 |
|
2.1.8 |
Expansion card installation........................................................ |
2-10 |
|
2.1.9 |
M.2 installation........................................................................... |
2-11 |
2.2 |
Motherboard rear and audio connections.............................................. |
2-12 |
|
|
2.2.1 |
Rear I/O connection................................................................... |
2-12 |
|
2.2.2 |
Audio I/O connections................................................................ |
2-14 |
2.3 |
Starting up for the first time.................................................................... |
2-16 |
|
2.4 |
Turning off the computer......................................................................... |
2-16 |
iii
Chapter 3: |
BIOS Setup |
|
|
3.1 |
Knowing BIOS............................................................................................. |
3-1 |
|
3.2 |
BIOS setup program................................................................................... |
3-2 |
|
|
3.2.1 |
Advanced Mode........................................................................... |
3-3 |
|
3.2.2 |
EZ Mode...................................................................................... |
3-6 |
|
3.2.3 |
QFan Control............................................................................... |
3-7 |
|
3.2.4 |
EZ Tuning Wizard........................................................................ |
3-9 |
3.3 |
My Favorites.............................................................................................. |
3-11 |
|
3.4 |
Main menu................................................................................................. |
3-13 |
|
3.5 |
Ai Tweaker menu...................................................................................... |
3-13 |
|
3.6 |
Advanced menu........................................................................................ |
3-14 |
|
|
3.6.1 |
Platform Misc Configuration....................................................... |
3-14 |
|
3.6.2 |
CPU Configuration..................................................................... |
3-14 |
|
3.6.3 |
System Agent (SA) Configuration.............................................. |
3-14 |
|
3.6.4 |
PCH Configuration..................................................................... |
3-15 |
|
3.6.5 |
PCH Storage Configuration....................................................... |
3-15 |
|
3.6.6 |
PCH-FW Configuration.............................................................. |
3-16 |
|
3.6.7 |
Onboard Devices Configuration................................................. |
3-16 |
|
3.6.8 |
APM Configuration..................................................................... |
3-16 |
|
3.6.9 |
USB Configuration..................................................................... |
3-17 |
|
3.6.10 |
Network Stack Configuration..................................................... |
3-17 |
|
3.6.11 |
HDD/SSD SMART Information.................................................. |
3-17 |
3.7 |
Monitor menu............................................................................................ |
3-17 |
|
3.8 |
Boot menu................................................................................................. |
3-18 |
|
3.9 |
Tool menu.................................................................................................. |
3-19 |
|
|
3.9.1 |
ASUS EZ Flash 3 Utility............................................................. |
3-19 |
|
3.9.2 |
Secure Erase............................................................................. |
3-20 |
|
3.9.3 |
ASUS User Profile..................................................................... |
3-21 |
|
3.9.4 |
ASUS SPD Information.............................................................. |
3-21 |
|
3.9.5 |
Graphics Card Information......................................................... |
3-21 |
|
3.9.6 |
Download & Install ARMOURY CRATE app............................. |
3-21 |
3.10 |
Exit menu................................................................................................... |
3-22 |
|
3.11 |
Updating BIOS.......................................................................................... |
3-23 |
|
|
3.11.1 |
EZ Update.................................................................................. |
3-23 |
|
3.11.2 |
ASUS EZ Flash 3....................................................................... |
3-24 |
|
3.11.3 |
ASUS CrashFree BIOS 3.......................................................... |
3-26 |
iv
Chapter 4: |
RAID Support |
|
4.1 |
RAID configurations ................................................................................... |
4-1 |
|
RAID definitions ........................................................................... |
4-1 |
Appendix |
|
|
Q-Code table |
............................................................................................................. |
A-1 |
Notices |
|
A-5 |
ASUS contact ......................................................................................information |
A-9 |
v
Electrical safety
•To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
•When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
•Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
•Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
•Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
•If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Operation safety
•Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.
•Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
•To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
•Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.
•Place the product on a stable surface.
•If you encounter technical problems with the product, contact a qualified service technician or your retailer.
vi
This user guide contains the information you need when installing and configuring the motherboard.
How this guide is organized
This guide contains the following parts:
1.Chapter 1: Product Introduction
This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers, and connectors on the motherboard.
2.Chapter 2: Basic Installation
This chapter lists the hardware setup procedures that you have to perform when installing system components.
3.Chapter 3: BIOS Setup
This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
Where to find more information
Refer to the following sources for additional information and for product and software updates.
1.ASUS website
The ASUS website (www.asus.com) provides updated information on ASUS hardware and software products.
2.Optional documentation
Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.
vii
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text |
Indicates a menu or an item to select. |
Italics |
Used to emphasize a word or a phrase. |
<Key> |
Keys enclosed in the less-than and greater-than sign |
|
means that you must press the enclosed key. |
|
Example: <Enter> means that you must press the Enter |
|
or Return key. |
<Key1> + <Key2> + <Key3> |
If you must press two or more keys simultaneously, the |
|
key names are linked with a plus sign (+). |
viii
|
Intel® Socket 1151 9th / 8th Gen Intel® Core™, Pentium® Gold and Celeron® |
|
|
Processors |
|
CPU |
Supports Intel® 14 nm CPU |
|
Supports Intel® Turbo Boost Technology 2.0* |
||
|
* Intel® Turbo Boost Technology 2.0 support depends on the CPU types |
|
|
* Refer to www.asus.com for the Intel® CPU support list |
|
Chipset |
Intel® B365 Chipset |
|
|
4 x DIMM, max. 64GB DDR4 2666 / 2400 / 2133 MHz Non-ECC, Un-buffered |
|
|
Memory* |
|
|
Dual channel memory architecture |
|
Memory |
Supports Intel® Extreme Memory Profile (XMP) |
|
|
||
|
* Hyper DIMM support is subject to the physical characteristics of individual CPUs. |
|
|
* DDR4 2666MHz will run at max. 2666MHz on Intel® 9th / 8th Gen. 6-core or higher |
|
|
processors. |
|
|
* Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists). |
|
|
|
|
|
Integrated Graphics ProcessorIntel® HD Graphics support |
|
Graphics |
Multi-VGA output support : HDMI/DVI ports |
|
- Supports DVI with max. resolution 1920 x 1200 @ 60Hz |
||
|
||
|
- Supports HDMI 1.4b with max. resolution 4096 x 2160 @ 30Hz |
|
|
|
|
Multi-GPU Support |
Supports AMD 2-Way CrossFireX™ Technology |
|
|
1 x PCIe 3.0 x16 Safeslot |
|
Expansion slots |
1 x PCIe 3.0 x16 slot (max. at x4 mode) |
|
1 x PCIe 3.0 x1 slots |
||
|
||
|
* When the M.2 Socket with E key is occupied, PCIe x16_2 will runs at x2 mode. |
|
|
|
|
|
Intel® B365 Chipset |
|
|
1 x M.2 Socket 3, with M key, type 2242/2260/2280 storage devices support |
|
|
(SATA & PCIe 3.0 x4 modes)* |
|
|
1 x M.2 Socket 3, with M key, type 2242/2260/2280 storage devices support |
|
|
(PCIe 3.0 x4 mode) |
|
Storage |
6 x SATA 6Gb/s ports |
|
|
- Support RAID 0, 1, 5, 10 |
|
|
- Intel® Optane Memory Ready |
|
|
- Supports Intel® Rapid Storage Technology |
|
|
* The M.2_1 socket shares bandwidth with SATA6G_1 ports when using M.2 SATA |
|
|
mode device. |
|
|
|
|
|
1 x Intel® I219V Gigabit LAN |
|
LAN |
Anti-surge LANGuard |
|
|
ROG GameFirst Technology |
|
|
(continued on the next page) |
ix
ROG STRIX B365-G GAMING specifications summary
|
ROG SupremeFX S1220A 8-Channel Codec High Definition Audio |
|
|
CODEC |
|
|
- Dual OP Amplifiers |
|
|
- Impedance sense for front and rear headphone outputs |
|
|
- Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking |
|
|
- High quality 120 dB SNR stereo playback output and 113 dB SNR |
|
|
recording input |
|
|
- Supports up to 32-Bit/192kHz playback |
|
Audio |
- SupremeFX Shielding Technology |
|
Audio Feature: |
||
|
||
|
- LED-lit Audio Shielding: Ensures precision analog/digital separation and |
|
|
greatly reduced multi-lateral interference, with a gorgeous illuminated trace |
|
|
path |
|
|
- Premium Japan-made audio capacitors provides warm, natural, and |
|
|
immersive sound with exceptional clarity and fidelity |
|
|
- Optical S/PDIF out port(s) at back panel |
|
|
- Sonic Radar III |
|
|
- Sonic Studio III + Sonic Studio Link |
|
|
Intel® B365 Chipset |
|
USB |
- 2 x USB 3.1 Gen 2 ports ( 2 ports at back panel [red]) |
|
- 6 x USB 3.1 Gen1 ports (4 ports at back panel; 2 ports at mid-board) |
||
|
||
|
- 6 x USB 2.0 ports( 2 ports at back panel; 4 ports at mid-board) |
|
|
Gamer’s Guardian: |
|
|
- ESD Guards on LAN, Audio, KBMS and USB3.1 Gen 1 / 2.0 ports |
|
|
- DRAM Overcurrent Protection |
|
|
- Stainless Steel Back I/O |
|
|
- Highly Durable Components |
|
|
- DIGI+ VRM |
|
|
- SafeSlot |
|
|
GPU Boost |
|
|
ASUS Exclusive Features: |
|
|
- AI Suite 3 |
|
ASUS Special |
- ASUS EPU |
|
Features |
- ASUS UEFI BIOS EZ Mode featuring friendly graphics user interface |
|
|
- ARMOURY CRATE |
|
|
ASUS EZ DIY: |
|
|
- ASUS CrashFree BIOS 3 |
|
|
- ASUS EZ Flash 3 |
|
|
- ASUS MyLogo |
|
|
ASUS Q-Design: |
|
|
- ASUS Q-Slot |
|
|
- ASUS Q-DIMM |
|
|
Pre-mounted I/O Shield |
|
|
ASUS Fan Xpert 4 |
|
|
(continued on the next page) |
x
ROG STRIX B365-G GAMING specifications summary
|
Aura Sync |
|
ROG Exclusive |
ROG RAMCache III |
|
ROG GameFirst V |
||
Features |
||
ROG Overwolf |
||
|
||
|
ROG CPU-Z |
|
|
1 x PS/2 keyboard/mouse combo port(s) |
|
|
2 x USB 2.0 ports |
|
|
1 x DVI port |
|
|
1 x HDMI 1.4b port |
|
Back I/O Ports |
2 x USB 3.1 Gen 2 ports (2 x Type-A [Red]) |
|
|
1 x LAN (RJ45) port |
|
|
4 x USB 3.1 Gen 1 ports |
|
|
1 x Optical S/PDIF out port |
|
|
5 x Audio jacks |
|
|
1 x AAFP connector |
|
|
1 x 4-pin RGB connector |
|
|
1 x USB 3.1 Gen 1 connector supports additional 2 USB 3.1 Gen 1 ports |
|
|
2 x USB 2.0 connectors supports additional 4 USB 2.0 ports |
|
|
1 x M.2 Socket 3 with M key, supports type 2242/2260/2280 devices |
|
|
(SATA & PCIe 3.0 x4 modes) |
|
|
1 x M.2 Socket 3 with M key, supports type 2242/2260/2280 storage |
|
|
(PCIe 3.0 x4 mode) |
|
|
1 x M.2 with E key for Wi-Fi module* |
|
|
1 x TPM connector |
|
Internal I/O Ports |
1 x COM port connector |
|
|
6 x SATA 6Gb/s connectors |
|
|
1 x AIO_Pump connector (4-pin) |
|
|
1 x CPU Fan connector (4 -pin) |
|
|
2 x Chassis Fan connectors (4 -pin) |
|
|
1 x 8-pin EATX 12 V Power connector |
|
|
1 x 24-pin EATX Power connector |
|
|
1 x Clear CMOS jumper |
|
|
1 x System panel connector |
|
|
* The M.2 Wi-Fi module is purchased separately. |
|
|
(continued on the next page) |
xi
ROG STRIX B365-G GAMING specifications summary
BIOS |
1 x 128 Mb Flash ROM, UEFI AMI BIOS, PnP, SM BIOS 3.1, ACPI 6.1 |
|
Manageability |
WOL, PXE |
|
|
Drivers |
|
Software |
EZ Update |
|
Anti-virus software (OEM version) |
||
|
||
|
ASUS Utilities |
|
Operating system |
Windows® 10 64-bit |
|
support |
|
|
|
|
|
Form factor |
Micro ATX Form Factor 9.6 inch x 9.6 inch ( 24.4 cm x 24.4 cm ) |
Specifications are subject to change without notice. Please refer to the ASUS website for the latest specifications.
xii
Check your motherboard package for the following items.
Motherboard |
1 x ROG STRIX B365-G GAMING motherboard |
|
|
|
|
Cables |
1 x 2-in-1 SATA 6Gb/s cables |
|
|
|
|
|
1 x Cable Tie black |
|
Accessories |
1 x ROG Strix Series sticker |
|
1 x ROG Strix Series Door Hanger |
||
|
||
|
1 x M.2 Screws Package |
|
|
|
|
Application drive |
1 x ROG motherboard support DVD |
|
|
|
|
Documentation |
1 x User guide |
|
|
|
If any of the above items is damaged or missing, contact your retailer.
xiii
Intel® 1151 CPU
Intel® 1151 compatible CPU Fan
PC chassis |
SATA hard disk drive |
Phillips (cross) screwdriver |
|
1 bag of screws |
DIMM |
Power supply unit
SATA optical disc drive (optional) Graphics card (optional)
The tools and components listed above are not included in the motherboard package.
xiv
Product Introduction |
1 |
Take note of the following precautions before you install motherboard components or change any motherboard settings.
Components shown in this section may require additional purchase. Refer to Package contents section for more information about the contents of your motherboard package.
•Unplug the power cord from the wall socket before touching any component.
•Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
•Hold components by the edges to avoid touching the ICs on them.
•Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.
•Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
Chapter 1
ROG STRIX B365-G GAMING |
1-1 |
1 Chapter
Refer to Internal connectors and Rear I/O connection section for more information.
1-2 |
Chapter 1: Product Introduction |
Layout contents
1.Power connectors
2.CPU socket
3.Fan and pump connectors
4.DIMM slots
5.SATA 6 Gb/s connector
6.USB 3.1 Gen 1 connector
7.System Panel connector
8.Clear RTC RAM jumper
9.USB 2.0 connector
10.TPM connector
11.Serial port connector
12.AURA RGB LED connector
13.Front Panel Audio connector
14.M.2 slot
15.M.2 Wi-Fi slot
Page
1-16
1-4
1-15
1-5
1-10
1-12
1-17
1-9
1-12
1-11
1-11
1-14
1-18
1-13
1-13
Chapter 1
ROG STRIX B365-G GAMING |
1-3 |
This motherboard comes with a surface mount Intel® Socket 1151 designed for the 9th / 8th Gen Intel® Core™, Pentium® Gold and Celeron® Processors.
1 Chapter
•Ensure that you install the correct CPU designed for LGA1151 socket only. DO NOT install a CPU designed for other sockets on the LGA1151 socket.
•The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU.
•Ensure that all power cables are unplugged before installing the CPU.
•Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.
•Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1151 socket.
•The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the
PnP cap.
1-4 |
Chapter 1: Product Introduction |
The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4 (Double Data Rate 4) memory modules.
A DDR4 memory module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.
Recommended memory configurations
Chapter 1
The recommended memory DIMM slots are marked with an asterix (*).
ROG STRIX B365-G GAMING |
1-5 |
1 Chapter
Memory configurations
You may install 2 GB, 4 GB, 8 GB, 16 GB unbuffered and non ECC DDR4 DIMMs into the DIMM sockets.
You may install varying memory sizes in Channel A, and Channel B. The system maps the total size of the lower-sized channel for the quad-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
• The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value.
•For system stability, use a more efficient memory cooling system to support a full memory load or overclocking condition.
•Always install the DIMMS with the same CAS Latency. For an optimum compatibility, we recommend that you install memory modules of the same version or data code (D/C) from the same vendor. Check with the vendor to get the correct memory modules.
•Visit the ASUS website for the latest QVL.
1-6 |
Chapter 1: Product Introduction |
Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.
Chapter 1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ROG STRIX B365-G GAMING |
1-7 |
1 Chapter
Recommended VGA configuration
Slot Description |
Single VGA |
|
1. |
PCIe 3.0 x16_1 |
x16 |
2. |
PCIe 3.0 x1_1 |
- |
3. |
PCIe 3.0 x16_2 |
x4 |
• We recommend that you provide sufficient power when running CrossFireX™ mode.
•Ensure to connect the 8-pin power plug when running CrossFireX™ mode.
•Connect a chassis fan to the chassis fan connectors when using multiple graphics cards for better thermal environment.
1-8 |
Chapter 1: Product Introduction |
1. Clear RTC RAM jumper |
|
The Clear RTC RAM jumper allows you to clear the Real Time Clock (RTC) RAM |
1 |
in the CMOS, which contains the date, time, system passwords, and system setup |
|
parameters. |
Chapter |
|
To erase the RTC RAM:
1.Turn OFF the computer and unplug the power cord.
2.Short-circuit pin 1-2 with a metal object or jumper cap for about 5-10 seconds.
3.Plug the power cord and turn ON the computer.
4.Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.
DO NOT short-circuit the pins except when clearing the RTC RAM. Short-circuiting or placing a jumper cap will cause system boot failure!
If the steps above do not help, remove the onboard button cell battery and move the jumper again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the button cell battery.
ROG STRIX B365-G GAMING |
1-9 |
|
1. SATA 6Gb/s connector |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 Chapter |
The SATA 6Gb/s connector allows you to connect SATA devices such as optical disc |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
drives and hard disk drives via a SATA cable. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If you installed SATA storage devices, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® B365 chipset.
•The connectors are set to [AHCI Mode] by default. If you intend to create a SATA RAID set using these connectors, set the SATA Mode item in the BIOS to [Intel RST Premium With Intel Optane System Acceleration(RAID)].
•The SATA6G_1 port shares bandwidth with M.2_1 slot when using M.2 SATA mode device.
•Before creating a RAID set, refer to the RAID Configuration Guide. You can download the RAID Configuration Guide from the ASUS website.
1-10 |
Chapter 1: Product Introduction |
2.Serial Port connector
The Serial (COM) Port connector allows you to connect a serial port module. Connect the serial port module cable to this connector, then install the module to a slot opening on the system chassis.
Chapter 1
The serial port module is purchased separately.
3.TPM connector
The TPM connector allows you to connect a Trusted Platform Module (TPM). A TPM securely stores keys, digital certificates, passwords, data, and also helps enhance network security, protect digital identities, and ensures platform integrity.
The TPM is purchased separately.
ROG STRIX B365-G GAMING |
1-11 |
4.USB 3.1 Gen 1 connector
The USB 3.1 Gen 1 connector allows you to connect a USB 3.1 Gen 1 module for additional USB 3.1 Gen 1 ports. The USB 3.1 Gen 1 connector provides data transfer speeds of up to 5 Gb/s.
1 Chapter
The USB 3.1 Gen 1 module is purchased separately.
5.USB 2.0 connector
The USB 2.0 connector allows you to connect a USB module for additional USB 2.0 ports. The USB 2.0 connector provides data transfer speeds of up to 480 MB/s connection speed.
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
The USB 2.0 module is purchased separately.
1-12 |
Chapter 1: Product Introduction |