No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
ii
Page 3
Contents
Contents ...................................................................................................... iii
Safety information ....................................................................................... v
License notice and trademark acknowledgement for Dolby Digital ..... vii
License notice and trademark acknowledgement for DTS .................... vii
About this user guide ................................................................................ vii
GNU General Public License ...................................................................A-2
ASUS contact information .......................................................................A-8
iv
Page 5
/
/
/
/
Safety information
Use only a dry cloth to clean the device.
DO NOT place on uneven
or unstable work surfaces.
Seek servicing if the casing
has been damaged. Refer all
servicing to qualied service
personnel.
SAFE TEMP: This device
should only be used in
environments with ambient
temperatures between 5oC
(41oF) and 35oC (95oF).
Ensure that you plugged
the device into the correct
power input rating (12Vdc,
3A).
Warning labels
The lightning ash with
arrowhead symbol,
within an equilateral
triangle, is intended
to alert the user to the
presence of uninsulated
dangerous voltage within
the product’s enclosure
that may be of sufcient
magnitude to constitute
a risk of electric shock to
persons.
To reduce the risk of
electric shock, do not
remove the back cover.
No user serviceable parts
inside. Refer servicing
to qualied service
personnel.
DO NOT expose to or
use near liquids, rain, or
moisture.
DO NOT install near any
heat-producing devices or
sources such as radiators,
heat registers, stoves, or
ampliers.
DO NOT throw the device in
municipal waste. This device
is designed to enable proper
reuse and recycling. Check
local regulations for disposal
of electronic products.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
• Danger of explosion if battery is incorrectly replaced. Replace only with the
same or recommended battery type.
• Dispose of used batteries according to local regulations.
v
Page 6
Safety caution
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not t into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
vi
Page 7
License notice and trademark
acknowledgement for Dolby Digital
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
License notice and trademark
acknowledgement for DTS
Manufactured under license under US Patent #s: 5,451,942; 5,956,674;
5,974, 380; 5,978,762; 6,487,535 & other US and worldwide patents issued &
Provides the basic information about your ASUS O!Play HD2 Media Player.
• Chapter 2: Network setup and services
Provides information on connecting your ASUS O!Play HD2 Media Player to
a home or LAN network.
• Chapter 3: Using the ASUS O!Play HD2 Media Player
Provides information on using your ASUS O!Play HD2 Media Player.
Chapter 4: Troubleshooting
•
Provides solutions to frequently-asked questions about your ASUS O!Play
HD2 Media Player.
vii
Page 8
Conventions used in this guide
To enure that you perform certain tasks properly, take note of the following symbols
used throughout this user guide.
DANGER/WARNING: Information to prevent injury to yourself
when trying to complete a task.
CAUTION: Information to prevent damage to the components when
trying to complete a task.
IMPORTANT: Instructions that you MUST follow to complete a
task.
NOTE: Tips and additional information to help you complete a
task.
Where to nd more information
Refer to the following sources for additional information and for product and
software updates.
1. ASUS Support site
Download the latest rmwares, drivers, and utilities from the ASUS Support
site at http://support.asus.com/.
2. ASUS Forum
Get the latest news and information about this product from the ASUS Forum
site at http://vip.asus.com/forum/.
3. Optional documentation
Your product package may include optional documentation, such as warranty
yers, that may have been added by your dealer. These documents are not
part of the standard package.
viii
Page 9
Chapter 1
/
Quick Start Guide
O!Play
HD Media Player
Getting started
Welcome
Thank you for buying the ASUS O!Play HD2 Media Player!
ASUS O!Play HD2 Media Player allows you to enjoy digital media les from your
computer via UPnP function, portable USB/eSATA storage devices, additional 3.5”
hard disk drive, memory cards, or over the network to your TV or entertainment
system.
Package contents
O!Play HD2 Media
Player
HDD bracket and screws
Power cordAC adapter
If any of the above items is damaged or missing, contact your retailer.
Support CD
(User Manual)
HDD power and signal
cable
Quick Start Guide
Remote control with two
AAA batteries
Composite AV
(audio-video) cable
1-1
Page 10
Specications summary
Supported video formatsMPEG1/2/4, H.264, VC-1, RM/RMVB
• RJ-45 cable to connect to a home or an ofce network (
• Use an HDMI cable to connect your HD media player to an HDTV or HDMI
monitor.
• Use the bundled composite AV cable to connect your HD media player to a
standard TV.
Optional)
Getting to know your O!Play HD2 media player
Front panel
1
CF card slot
1
Insert the CF card into this slot. The device supports 64GB CF v4.1.
SD/MMC card slot
2
Insert the SD/MMC card into this slot. The device supports 32GB SDHC v2.0
and 2GB MMC v4.2.
MS/MS-Duo card slot
3
Insert the MS/MS-Duo card into this slot. The device supports 128MB MS v1.43
and 32GB MS Pro v1.03.
eSATA/USB 2.0 combo port
4
Connect a USB 2.0/eSATA device such as an external hard drive into this port.
2
34
7
5
6
ASUS O!Play HD2 media player
1-3
Page 12
USB 2.0 port
5
Connect a USB 2.0 device into this port.
IR (Infra-red) Receiver
6
Allows you to control the HD media player using the IR remote control.
LED indicators
Displays the status of the HD media player.
LEDStatusDescription
7
PowerOFFThe device is turned off.
OrangeThe device is in standby mode.
BlueThe device is turned on.
Ensure that the IR receiver is not blocked. Otherwise, the Media Player will not
be able to receive the command from the remote control.
1-4
Chapter 1: Getting started
Page 13
Rear panel
123456
109
Power (DC-In) input
1
Insert the power adapter into this port.
Component output
2
Insert a YPbPr video cable to connect to a TV or monitor.
Digital audio output (COAXIAL)
3
Insert an coaxial cable into this port to connect an external Hi-Fi audio system.
HDMI port
4
Insert an HDMI cable into this port to connect to a high-denition multimedia
interface (HDMI) device.
LAN (RJ-45) port
5
Insert an RJ-45 cable into this port to connect to a local area network (LAN).
USB 2.0 port
6
Connect a USB 2.0 device into this port.
USB 3.0 PC link
7
Connect a USB 3.0 device into this port.
Reset button
8
Using a pin or a paper clip, press this button to reset the device to its factory
default settings.
Digital audio output (OPTICAL)
9
Insert an optical cable into this port to connect an external Hi-Fi audio system.
Analog audio/video output
10
Insert a composite AV cable to connect to a television or other audio/video
equipment.
7
8
ASUS O!Play HD2 media player
1-5
Page 14
Remote control
Use the remote control to power on/off the O!Play HD2 media player, browse
through menus, and select the media le to play, view, or listen to.
Display
Disc menu
Edit
Repeat
Stop
Rewind
Previous
Setup
Option
Navigation/OK
keys
Volume up
Mute
Volume down
Movies
Music
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Power on/off
16
Disc eject
17
18
Music shufe
Zoom in
19
20
Fast forward
Play/Pause
21
Next
22
Subtitle
23
Language
24
Home
25
Return
26
27
NAS
On-line Media
28
Photo
29
1-6
Chapter 1: Getting started
Page 15
1
2
3
4
5
6
7
8
9
Navigation/OK keys
10
Display
Press to display the le name, le type, and time.
Disc menu
Press to launch the disc menu if an external optical disk drive is installed.
Edit
Press to copy, delete, rename, and move the les.
Repeat
Press to repeat the playback of the currently playing music, movie, or
photo le.
Stop
Stops the playback.
Rewind
Press to rewind the playback.
Previous
Returns to the previous media le.
Setup
Launches the Setup menu.
Option
Press to select the movie, music, and photo effects.
Press the up/down keys to move through the menu bar in a
submenu.
Press the up/down keys to decrease/increase a numerical
value.
Press the left/right keys to move through the main menus in
the Home screen.
Press the left/right keys to move through the items in a
submenu.
Press OK to conrm the selection.
11
12
13
14
15
Volume up
Increases the volume.
Mute
Press to disable audio output.
Volume down
Decreases the volume.
Movies
Press to enter the Movies mode.
Music
Press to enter the Music mode.
ASUS O!Play HD2 media player
1-7
Page 16
16
17
Power on/off
Turn the HD media player on or off.
Disc eject
Press to eject the disc in the external optical disk drive.
Music shufe
18
Press to group all your music les in your storage device and then play the
music les randomly.
19
20
21
22
23
24
25
26
27
28
29
Zoom in
Zooms in on the screen.
Forward
Press to forward the playback.
Play/Pause
Toggles between playback and pause.
Next
Goes to the next media le.
Subtitle
Press to congure the subtitle settings such as color and font size.
Language
Press to select the language for the video you are watching.
Home
Displays the home menu.
Return
Returns to the previous screen.
NAS
Press to enter the NAS mode.
On-line Media
Press to enter the On-line Media mode.
Photo
Press to enter the Photo mode.
1-8
Chapter 1: Getting started
Page 17
Getting your O!Play HD2 media player ready
If you need warranty servicing for your HD media player, ensure that you send
it back in its original packaging, which will provide better protection for your
product during delivery. Warranty may be voided if the product is damaged due
to improper packaging. ASUS will not compensate or replace any item damaged
due to improper packaging.
Installing the hard disk drive
You may install a 3.5” hard disk drive to your HD media player.
• The hard disk drive is purchased separately.
• If you install a new hard disk drive on your HD media player, a warning
screen will appear, reminding you to format the hard disk drive. Follow
the onscreen instructions to complete the format process. Any abnormal
shutdown leads to longer startup time and longer disk check on the next boot
up. The checking process may take several minutes depending on the hard
disk drive capacity.
• If you want to delete all data on your used hard disk drive, go to
System, and then click HDD Format.
• ASUS will not be held liable for any damage/malfunction caused by improper
installation of the hard disk drive.
• ASUS will not be held liable for data loss or recovery.
Setup >
If you want to rescan your hard disk drive, complete one of the following steps:
Go to Setup > System > Scan Storage > Auto Scan, and then click on.
Go to Setup > System > Scan Storage action, and then click rescan storage.
• Back up the important les or folders periodically to avoid any potential data
loss due to disk crash.
• Be cautious of the hot temperature while using the hard disk drive for a long
time.
ASUS O!Play HD2 media player
1-9
Page 18
To install the hard disk drive:
1. Install the hard disk drive on the HDD bracket (
), and then secure it with
1
four screws (2).
2. Attach one end of the supplied HDD power and signal cable to the hard disk
drive (3).
2
2
3. Open the bottom lid of your HD
media player.
4. Attach the other end of the
supplied HDD power and
signal cable to the HD media
player (6).
5. Carefully insert the HDD
bracket to the HD media
player (7).
6. Secure the HDD bracket to
the HD media player with four
screws (8).
1
3
5
6
7
4
8
1-10
Chapter 1: Getting started
Page 19
7. Collect the HDD power and
signal cable into the HD media
player so that you could
completely cover the bottom
lid on it (9).
8. Close the bottom lid of your HD
media player.
9
10
11
ASUS O!Play HD2 media player
1-11
Page 20
1
2
3
Connecting the power adapter
To connect the power adapter:
1. Connect the AC power cord to the AC adapter.
2. Connect the AC adapter to the DC-in port at the back of your HD media
player.
3. Connect the AC adapter to a power source.
Connecting devices to your HD media player
To connect devices to your HD media player:
1. Do any of the following to connect a display to your HD media player:
• Use an HDMI cable to connect your HD media player to an HDTV or an
HDMI monitor.
1-12
The HDMI cable is
purchased separately.
Chapter 1: Getting started
Page 21
• Use the bundled composite AV cable to connect your HD media player to
a standard TV.
• Use a YPbPr video cable and the bundled composite AV cable to
connect your HD media player to a TV or monitor.
The YPbPr video cable is purchased separately.
ASUS O!Play HD2 media player
1-13
Page 22
/
• Use the RCA audio cable to connect your HD media player to the Cine5
/
PC speaker.
The RCA cable is bundled with your Cine5 PC speaker.
2. Do any of the following to connect a storage device or memory card to your
HD media player:
• Insert a USB/eSATA storage device such as a portable hard disk drive
or a USB ash disk to the USB port or USB/eSATA combo port at the left
side of your HD media player.
• Insert a memory card such as SD/MMC, CF, and MS/MS-Duo cards into
the appropriate card slot at the right side of your HD media player.
You can also access media les from a shared folder of a network computer.
For more details, refer to the section Connecting to a network in Chapter 3.
1-14
Chapter 1: Getting started
Page 23
3. Use either the bundled composite AV cable or an S/PDIF cable to connect
your audio system to your HD media player.
4. Plug the HD media player’s power cable to a power source.
5. Turn on the HDTV, TV, or HDMI monitor.
6. If you are using an HDTV or a standard TV, set your HDTV/TV to video
mode.
If you are using an HDMI monitor, ensure that the monitor’s display resolution
is set to HDMI.
Refer to the documentation that came with your HDMI monitor.
Starting for the rst time
When you start your HD media player for the rst time, a series of screens appear
to guide you in conguring the basic settings of your HD media player.
To start for the rst time:
1. Turn on your HD media player and your HDTV, TV, or HDMI monitor.
• If you are using an HDTV or a standard TV, set your HDTV/TV to video
mode.
• If you are using an HDMI monitor, ensure that the monitor’s display
resolution is set to HDMI.
2. The Setup Wizard appears. Follow the onscreen instructions to complete the
setup process.
Use the remote control the navigate the screen.
ASUS O!Play HD2 media player
1-15
Page 24
1-16
Chapter 1: Getting started
Page 25
Chapter 2
Router
Desktop PC or Notebook
SPLENDID MENU
LAN
LAN
Network setup and services
Connecting to a network
Using DHCP IP (network setup with a router)
Using DHCP IP allows the router to automatically assign an IP address for your
media player.
To connect to your network:
1. Connect one end of the RJ-45 cable to the LAN port at the back of your HD
2. Connect your computer and other necessary devices to your router.
3. Connect all the necessary devices to your HD media player.
media player and the other end to the LAN port of the router.
Refer to the documentation that came with your router.
For more details, refer to the section Connecting devices to your HD media player in Chapter 1.
2-1
Page 26
4. From the Home screen, press the
left/right keys / to navigate to
Setup, then press .
You may also press
to launch
the Setup menu.
5. Select Network > Wired Lan Setup and press .
6. Select DHCP IP (AUTO) and press
.
7. Select either DNS (AUTO) or DNS (Manual) as your setup type and
press :
• If you select
DNS (AUTO), the router automatically assigns an DNS
server IP address for your media player.
• If you select
• Use the up/down keys / to increase/decrease a numerical value.
• Use the left/right keys
DNS (Manual), key in the DNS Server IP address.
/ to move to other items on the System menu.
8. On the conrmation message, select Yes to save the setting.
• If you cannot connect to your ofce network, contact your network
administratior.
• If you want to access shared network les, ensure that the computer’s les
are shared on the network. For more details, refer to the section Sharing media les over the network in this chapter.
2-2
Chapter 2: Network setup and services
Page 27
Desktop PC or Notebook
SPLENDID MENU
LAN
Using FIX IP (network setup with a direct connection to a
computer)
Using FIX IP allows your media player to connect to a computer directly.
To connect to your network:
1. Connect one end of the RJ-45 cable to the LAN port at the back of your HD
media player and the other end to the computer.
2. Connect all the necessary devices to your HD media player.
For more details, refer to the section Connecting devices to your HD media player in Chapter 1.
3. From the Home screen, press the left/right keys / to navigate to Setup,
then press .
You may also press
4. Select
5. Select
Network > Wired Lan Setup and press .
FIX IP (MANUAL) and
to launch the Setup menu.
press .
ASUS O!Play HD2 media player
2-3
Page 28
6. From the FIX IP screen, key in the IP
Address and Subnet Mask.
• Use the up/down keys / to increase/decrease a numerical value.
• Use the left/right keys
/ to move to other items on the System menu.
• You may use the default settings of the IP Address and Subnet Mask:
• IP Address: 192.168.0.2
• Subnet Mask: 255.255.255.0
• You may also obtain the IP address and subnet mask from your Internet
Service Provider (ISP).
7. On the conrmation message, select Yes to save the setting.
8. On your computer, you should key in the same subnet mask as the one on
the HD media player. For more details, refer to the next section Conguring the IP address settings for your computer.
2-4
Chapter 2: Network setup and services
Page 29
Conguring the IP address settings for your computer
To access the HD media player when using FIX IP, you must have the correct TCP/IP
settings on your computer.
Follow the instructions below that correspond to the operating system installed on
your computer.
Use the following default IP settings:
IP address: 192.168.0.xxx
•
xxx can be any number between 2 and 254. Ensure that the IP address is
not used by another device.
Subnet Mask: 255.255.255.0 (same as the HD media player)
•
Windows® XP OS
1. Click
2. Select
Start > Control Panel >
Network Connection. Right-click
Local Area Connection then select
Properties.
Internet Protocol (TCP/IP),
then click Properties.
3. Select
Use the following IP address:
and key in the IP address and Subnet mask.
4. Click
OK when done.
ASUS O!Play HD2 media player
2-5
Page 30
Windows® Vista/7 OS
1. Click
Start > Control Panel > Network
and Sharing Center. Right-click
Local Area Connection then select
Properties.
2. Select
Internet Protocol Version
4(TCP/IPv4), then click Properties.
3. Select Use the following IP address:
and key in the IP address and Subnet mask.
4. Click
OK when done.
2-6
Chapter 2: Network setup and services
Page 31
Mac OS X 10.5.xx
1. Choose
2. Select
3. Key in the
Apple menu > System Preferences. Click Network.
Manually.
IP Address and Subnet
Mask.
4. Click
Apply when done.
Checking the IP address of your computer
To check the IP address of your computer under Windows® OS:
2
3
4
1. Click
2. In the
3. The MS DOS window appears. Key in
Start > Run.
Run window, key in cmd or command, and then click OK.
ipcong, and then press the Enter
key. The IP address of your computer is displayed.
ASUS O!Play HD2 media player
2-7
Page 32
PPPoE
PPPoE (Point-to-Point Protocol over Ethernet) is a specication for connecting
multiple computer users on an Ethernet local area network to a remote site through
common customer premises equipment. PPPoE provides the ability to connect
a network of hosts over a simple bridging access device to a remote Access
Concentrator.
Many apartment houses, hotels, and corporations are now providing shared
Internet access over DSL lines using Ethernet and PPPoE.
To congure the PPPoE settings on your O!Play HD2:
1. From the Home screen, press the left/right keys
then press .
You may also press
2. Select
Network > PPPoE Setup
and press .
to launch the Setup menu.
/ to navigate to Setup,
3. Select PPPoE Username or
PPPoE Password, and then
press .
4. Use the onscreen keyboard to enter the
Password that was provided by your Internet Service Provider (ISP).
5. On the conrmation message, select
2-8
PPPoE Username and PPPoE
Yes to save the setting.
Chapter 2: Network setup and services
Page 33
DLNA
DLNA (Digital Living Network Alliance) is a standard used by manufacturers of
consumer electronics to allow entertainment devices within the home to share and
enjoy their content with each other across a home network.
The digital home is an evolution of the idea that PCs, consumer electronics and
mobile devices should work together seamlessly through a wired or wireless
network to share digital content within a home environment. Digital living extends
that idea to include sharing content on the go as well.
The digital living is to provide you with an immediate connection between your
digital devices, regardless of the brands. You will nally enjoy the freedom to
access, play and share your favorite movies, music and photos at home.
First you need a wired home network and you’re ready to get started. That’s
because DLNA devices connect, discover and communicate with each other over a
home network.
To activate the DLNA function on your O!Play HD2:
1. From the Home screen, press the left/right keys
then press .
You may also press
2. Select
System. Press the up/down
keys / to navigate to DLNA Renderer, then press .
to launch the Setup menu.
/ to navigate to Setup,
3. Select
ASUS O!Play HD2 media player
On to activate the DLNA
function.
2-9
Page 34
UPnP
O!Play HD2 supports UPnP. The music, pictures and video les on the UPnP media
server will be sorted automatically. Ensure that the Windows Media Player 11 is
installed on your computer as the UPnP media server.
To set up UPnP for Windows® XP:
1. Click
2. Click
3. Select
Start > Control Panel > Add or Remove Programs.
Add/Remove Windows Components.
Networking Services, then
click Details....
4. Select
5. Go to Control Panel > Administrative Tools > Services.
2-10
Internet Gateway
Discovery and Control Client and
UPnP User Interface. And then,
click OK to install the selected
functions.
Chapter 2: Network setup and services
Page 35
6. Find the HTTP SSL, SSDP
Discovery Service, Universal
Plug and Play Device Host, and
Windows Media Player items,
and change their Startup Type to
Automatic.
To add the media les to the library of Windows Media Player 11:
1. Open the Windows Media Player 11 on your computer.
2. Click Library > Add to Library...
to add the media les into this
database. Refer to the Windows
Help for more detailed instructions.
Some le formats may not be supported by the Windows Media Player. Visit the
Microsoft website for details.
ASUS O!Play HD2 media player
2-11
Page 36
To set up the Windows Media Player 11:
1. Ensure that the network setting on your computer is correct, and your O!Play
HD2 is on the Home screen.
2. From the Home screen, press the
left/right keys / to navigate to
File Manager, then press .
3. Navigate to
UPnP, then press .
You may also enter the UPnP media server from the Movies/Music/Photo
menus. Refer to chapter 3 for details.
4. Open the Windows Media Player 11
on your computer, and click Library
> Media Sharing.
2-12
Chapter 2: Network setup and services
Page 37
5. Check the item Share my media
and an Unknown Device icon
appears on the screen. Select this
icon, then click Allow and OK.
The Unknown Device is your
O!Play HD2 Media Player.
If the Unknown Device icon does
not appear on the screen, click
Settings.
Check the item
Allow new devices
and computers automatically, and click OK.
To use media les through the UPnP media server:
1. Now you should be able to see your
computer (UPnP media server) in
the UPnP device list.
If your computer name does not
appear in the list, repeat steps 2–3
on the previous page.
2. Select the name of your computer (UPnP media server) and press
3. Navigate to the desired folder, and then press
The media les on your computer (UPnP media server) are sorted into All
Media, Music, Pictures, and Video.
to enjoy the media les.
ASUS O!Play HD2 media player
.
2-13
Page 38
Sharing les over the network
Sharing les under Windows® XP OS
To congure your computer to allow folders to be shared:
1. Click Start >
Network and Internet Connection
> Network Setup Wizard.
Control Panel >
2. Select
3. When done, click
To share les under Windows® XP OS:
1. On your computer, select the folder
2. Right-click the selected folder, and
Turn on le and printer
shariing.
Finish.
containing the les that you want to
share.
select Sharing and Security.
2-14
Chapter 2: Network setup and services
Page 39
3. Tick Share this folder.
If you want to set permissions for the
network users, click Permissions. Click
Apply when done.
4. A hand icon appears on the folder
indicating that the folder’s contents are
shared over the network.
Sharing les under Windows® Vista OS
In Windows® Vista OS, you can share les in any of these two ways:
• Share les from a folder on your computer.
• Share les from the Public folder.
Sharing les from a folder on your computer
To share les from a folder on your computer:
1. On your computer, select the folder containing the les that you want to
share.
2. Right-click the selected folder, and select
3. In the
4. To set permissions for the network user, select any of these permission levels
•
• Contributor
• Co-owner
5. When done, click
File Sharing screen, select the network user that you want to share
les with from the dropdown list, then click Add.
from the dropdown list under Permission Level:
Reader: Select this option if you want the user to have a read-only
access rights to the shared les. S/he cannot add, change, or delete the
shared les.
: Select this option to allow the user to view and add shared
les. S/he can only change or delete the les s/he had shared.
: Select this option to allow the user to view, add, change, or
delete a shared le.
Share.
Share.
ASUS O!Play HD2 media player
2-15
Page 40
Sharing les from the Public folder
The Public folder allows you to share your les with other people using your
computer or with other users in the network.
To share les from the Public folder:
1. Click
2. From
> Documents.
Favorite Links in the navigation pane, click Public. Put any les or
folders that you want to share into any subfolders in the Public folder.
To restrict access to the les and folders in the Public folder, refer to the
succeeding sections.
To restrict a user’s access to the Public folder:
You can turn on the password-protected sharing function to restrict access to the
Public folder only to people with user accounts and passwords on your computer.
1. Click
> Control Panel > Network and Internet > Network and Sharing
Center to launch the Network and Sharing Center.
2. From the
Password protected sharing dropdown list, select Turn on
password protected sharing.
3. When done, click
Apply.
To set the user’s access level to the Public folder:
1. Click
> Control Panel > Network and Internet > Network and Sharing
Center to launch the Network and Sharing Center.
2. From the
Public folder sharing dropdown list, select any of these three
options:
• Turn on sharing so anyone with network access can open les
• Turn on sharing so anyone with network access can open, change,
and create les
• Turn off sharing (people logged on to this computer can still access
this folder)
3. When done, click
Apply.
2-16
Chapter 2: Network setup and services
Page 41
Sharing les under Windows® 7 OS
To congure your computer to allow folders to be shared:
1. Click
Start > Control Panel >
Network and Internet > Network
and Sharing Center > Choose
homegroup and sharing options
> Change advanced sharing
settings....
2. Ensure that the following options are correctly selected:
Turn on network discovery
Turn on le and printer sharing
Media streaming is off
Allow Windows to manage homegroup connections (recommended)
To share les under Windows® 7 OS:
1. On your computer, select the folder containing the les that you want to
share.
2. Right-click the folder, and select
3. Click
Sharing tab > Advanced
Sharing....
Properties.
ASUS O!Play HD2 media player
2-17
Page 42
4. Check the Share this folder item,
then click Permissions.
5. Select the network user that your
want to share les, and set the
access control options.
2-18
Chapter 2: Network setup and services
Page 43
Sharing les under Mac OS X 10.5.xx
To share a folder under Mac OS:
1. Choose
2. Click the + icon to display
the available folders.
Navigate to the folder that
you want to share.
3. Add the User group
Everyone.
4. Repeat steps 2–3 to share
other folders.
5. When done, click
6. Check the box Share les and folders using SMB,
and click Done.
Apple menu > System Preferences. Click Sharing.
Options....
2
3
ASUS O!Play HD2 media player
2-19
Page 44
2-20
Chapter 2: Network setup and services
Page 45
Chapter 3
Using your O!Play HD2 media player
The Home screen
The Home screen includes these main options: Movies, Music, Photo, File
Manager, On-line Media, NAS, and Setup.
The option File Manager allows you to view all your media les in your storage
devices and network.
3-1
Page 46
Conguring the O!Play HD2 settings
To congure the O!Play HD2 settings:
1. From the Home screen, press the
left/right keys / to navigate to
Setup, then press .
You may also press
the Setup menu.
2. Press the up/down keys / to
navigate through System, Network,
Video, Audio, and Firmware Setup,
then press the right key or to
allow you to select the item that you
want to congure.
3. Press the up/down keys
navigate to the item that you want to
congure.
to launch
/ to
4. Press the right key or to enter
its submenu and use the up/down
keys / to select the setting.
Use the up/down keys / to increase/decrease a numerical value if
necessary.
5. Press to save or press to cancel the settings made.
3-2
Chapter 3: Using your O!Play HD2 media player
Page 47
The O!Play HD2 Setup menu allows you to congure the following settings.
Setup
options
SystemNetworkVideoAudio
Menu
Language
Text Encoding PPPoE SetupTV SystemDigital Output
Time
Version Info1080P 24HZ
Network Info
R/RW Auto-Play
Time Zone
Screen Saver
Power saving
DLNA Renderer
Device Name
Factory Default
MiniKBD
Language
HDD Format
Scan Storage
Scan Storage
action
Wired Lan
Setup
Aspect RatioNight ModeUSB upgrade
Digital Noise
Reduction
Firmware
Setup
You may press to congure the playback settings while enjoying a media
le.
ASUS O!Play HD2 media player
3-3
Page 48
Playing a video le
Video control buttons on the remote control
ButtonFunction
Press to enter the Movies mode.
Press to display the video’s le source, le name, le format, and elapsed
time.
Press to return to the previous screen.
Press to toggle between playback and pause.
Press to rewind the playback. Press repeatedly to change the rewinding
speed to x1.5, x2, x4, x8, x16, x32, or normal speed (x1)
Press to forward the playback. Press repeatedly to change the forward
speed to x1.5, x2, x4, x8, x16, x32, or normal speed (x1)
Press to stop the playback.
Press to congure the video playback settings.
Press to increase the volume.
Press to decrease the volume.
3-4
Press to copy, delete, rename, and move the les.
Press to return to the previous video le.
Press to go to the next video le.
Press to congure the subtitle settings such as color and font size.
Press to select the language for the video you are watching.
Press to launch the Setup menu.
Press to launch the disc menu if an external optical disk drive is installed.
Press to eject the disc in the external optical disk drive.
Press to disable audio output.
Chapter 3: Using your O!Play HD2 media player
Page 49
Playing a video le
To play a video le:
1. From the Home screen, press the
left/right keys / to navigate to
Movies, then press .
You may also press
Movies mode.
2. Using the up/down keys / ,
select the source of your video le,
then press .
Before you can access a media le over the network, ensure that the folder
containing the le is shared. For more details, refer to the section Sharing les
over the network in Chapter 2.
to enter the
3. Use the up/down keys
/ to locate the video that you want to play. Press
or to play the video.
You may press
to copy, delete, rename, and move the selected le.
Playing a movie from the external optical disk drive
1. You have to enable the auto-play
function of your O!Play HD2. Go to
Setup > System, and then turn on
the R/RW Auto-Play.
ASUS O!Play HD2 media player
3-5
Page 50
Your O!Play HD2 supports only the homemade VCD/DVD.
2. Plug the external optical disk dirve
to your O!Play HD2, and place the
VCD/DVD into the drive.
3. The VCD/DVD automatically
displays the main menu.
You may press
to launch the
VCD/DVD playback setting menu,
and to eject the VCD/DVD from
the external optical disk drive.
Conguring the subtitle settings
The Subtitle key allows you to congure the subtitle settings such as font size
and color.
• Ensure that the subtitle status is set to On.
• Ensure that the subtile format is supported by your O!Play HD2. Otherwise,
you may not be able to congure the subtitle settings.
To congure the subtitle settings:
1. During playback, press
to launch the subtitle menu.
2. Use the navigation keys to move through and make your changes to the
subtitle settings.
Subtitle menu
Subtitle status
Subtitle location
Text encoding
3-6
Time syncFont size
Chapter 3: Using your O!Play HD2 media player
Subtitle color
Page 51
Conguring the video playback settings
The video playback setting menu allows you to congure several video settings
such as Aspect Ratio, Subtitle settings, Audio conguration, Playback Search,
Repeat options, Skip duration options, and Zoom settings.
To congure the video playback settings:
1. During playback, press to
launch the video playback setting
menu.
2. Press the up/down keys
navigate to the the function that
you want to congure. Press
to enter its submenu to conrm the
selection.
3. Navigate to the desired option, then
press to save or press to
cancel the settings made.
/ to
ASUS O!Play HD2 media player
3-7
Page 52
Playing music
Music control buttons on the remote control
ButtonFunction
Press to enter the Music mode.
Press to display the song’s le source, le name, le format, and elapsed
time.
Press to return to the previous screen.
Press to toggle between playback and pause.
Press to rewind the playback. Press repeatedly to change the rewinding
speed to x1.5, x2, x4, x8, x16, x32, or normal speed (x1)
Press to forward the playback. Press repeatedly to change the forward
speed to x1.5, x2, x4, x8, x16, x32, or normal speed (x1)
Press to stop the playback.
Press to return to the previous music le.
Press to go to the next music le.
Press to congure the music playback settings.
3-8
Press to launch the Setup menu.
Press to copy, delete, rename, and move the les.
Press to disable audio output.
Press to group all your music les in your storage device and then play the
music les randomly.
Chapter 3: Using your O!Play HD2 media player
Page 53
Playing a music le
To play a music le:
1. From the Home screen, press the
left/right keys / to navigate to
Music, then press .
You may also press
Music mode.
to enter the
2. Using the up/down keys
select the source of your music le,
then press .
Before you can access a media le over the network, ensure that the folder
containing the le is shared. For more details, refer to the section Sharing les
over the network in Chapter 2.
3. Use the up/down keys
/ to locate the music that you want to listen.
Press or to play the music.
You may press
Press to group all your music les in your storage device and then play the
music les randomly.
to copy, delete, rename, and move the selected le.
/ ,
ASUS O!Play HD2 media player
3-9
Page 54
Conguring the audio playback settings
The audio playback setting menu allows you to congure the audio settings such
as Repeat options and Shufe Loop.
To congure the audio playback settings:
1. During playback, press
launch the audio playback setting
menu.
2. Press the up/down keys
navigate to the the function that
you want to congure. Press to
conrm the selection.
To congure the audio settings from the Setup mode:
1. From the Home screen, press the
left/right keys / to navigate to
Setup, then press .
You may also press
the Setup menu.
2. Navigate to
right keyto allow you to select the
audio settings.
You may turn on Night Mode to listen to music at night, but not disturbing the
others.
If you want to congure the
descriptions of the options:
•
•
•
•
Audio, then press the
HDMI LPCM (Default): Select this option when connecting your TV to
the HDMI port of the media player.
HDMI RAW: Select this option for the multichannel audio receiver. The
RAW data of the audio will be sent to the HDMI multichannel receiver for
decoding.
SPDIF LPCM: Select this option for the S/PDIF audio receiver.
SPDIF RAW: Select this option for the S/PDIF multichannel audio
receiver. The RAW data of the audio will be sent to the S/PDIF
multichannel receiver for decoding.
to
/ to
to launch
Digital Output, refer to the following for the
3-10
Chapter 3: Using your O!Play HD2 media player
Page 55
Viewing photos
Viewing photos
To view photos:
1. From the Home screen, press the
left/right keys / to navigate to
Photo, then press .
You may also press
Photo mode.
to enter the
2. Using the up/down keys
select the source of your photo,
then press . Locate the photo
that you want to view.
3. Press
Press to view the photos in
slideshow mode.
You may press
rename, and move the selected le.
to browse the photos.
/ ,
to copy, delete,
Viewing photos in slideshow mode
To view photos in slideshow mode:
1. When the selected photo is displayed in full screen, press
control to start the slideshow. Photos in the same source folder will be
displayed in order.
2. Press
Press
to pause the slideshow.
or to return to the source folder.
on the remote
ASUS O!Play HD2 media player
3-11
Page 56
Setting the background music for the slideshow
To set the background music for the slideshow:
1. Before viewing photos, go to
2. Press
photo slideshow. The slideshow plays with the background music.
to return to the Home screen and then go to Photo to start the
Press instead of while playing music les. Otherwise, the background
music will not play.
Music and play music les rst.
Conguring the photo playback settings
The photo playback setting menu allows you to congure the photo settings such
as photo rotation, slideshow timing, slideshow transition effect, Ken Burns effect,
Repeat options, and Shufe Loop.
To congure the photo playback settings:
1. During playback, press
launch the photo playback setting
menu.
2. Press the up/down keys
navigate to the the function that
you want to congure. Press
to enter its submenu to conrm the
selection.
3. Navigate to the desired option, then press
the settings made.
to
/ to
to save or press to cancel
3-12
Chapter 3: Using your O!Play HD2 media player
Page 57
File Manager
The File Manager offers both the device management and media le management
that allow you to browse the media les by le types (All Media, Movies, Photos,
and Music) and le sources (USB, Network, and UPnP).
• Ensure that your O!Play HD2 is correctly connected to a network. Refer to
Chapter 2 for more details on connecting to a network.
• If you want to rescan your hard disk drive, complete one of the following
steps:
Go to Setup > System > Scan Storage > Auto Scan, and then click on.
Go to Setup > System > Scan Storage action, and then click rescan storage.
To browse the media les through File Manager:
1. From the Home screen, press the
left/right keys / to navigate to
File Manager, then press .
2. Use the up/down keys /
to navigate through All Media,
Movies, Photos, and Music to
select the le type that you want to
browse, then press or .
3. Use the left/right keys
navigate through USB, Network,
and UPnP to select the source of
the media le, then press .
/ to
4. Navigate to the device or computer
to locate the media les that you
want to browse.
You may press
to copy, delete,
rename, and move the selected le.
ASUS O!Play HD2 media player
3-13
Page 58
On-line Media
The On-line Media feature provides online media services, such as Internet
Radio, Weather, and Stock.
The online content is constantly added and updated. Visit the ASUS website for
the latest information.
Ensure that your O!Play HD2 is connected to the internet. However, the network
connection might be disabled if the internet link is abnormal or blocked.
To use the online media services on your O!Play HD2:
1. From the Home screen, press the
left/right keys / to navigate to
On-line Media, then press .
You may also press
On-line Media mode.
2. Use the up/down keys / to select the category of the online media
services that you want to use, then press .
to enter the
You may search an online media service by entering a keyword in the Internet Radio. Locate the Search option, press, and then type the keyword of the
online media service that you want to search.
3. Navigate to the desired online media service, then press to enter.
• You may add the favorite online media service to Favorite in the Internet Radio, Weather, and Stock. Navigate to the online media service that you
want to add as your favovite. Press the left key , select Add to My Favorite,
and then press.
• While browsing the website, you may use an additonal mouse to enjoy the
bowser service. Refer to the mouse support list on the gift box.
3-14
Chapter 3: Using your O!Play HD2 media player
Page 59
NAS
NAS ( Network-attached storage) is a device connected to a network that only
provides le-based data storage services to other devices on the network.
The NAS function allows all networked servers to share their storage les with
networked clients.
• You must have the hard disk drive installed on your O!Play HD2 for using the
NAS function.
• Ensure that your O!Play HD2 is correctly connected to the network. Refer to
Chapter 2 for more details on connecting to a network.
The video/audio/photo playback function is disabled when using NAS.
To use the NAS function on your O!Play HD2:
1. From the Home screen, press the
left/right keys / to navigate to
NAS, then press .
You may also press
NAS mode.
to enter the
2. Use the up/down keys / to
select the server that you want to
use, then press the right key or
.
3. Select
On and press to enable the NAS function on your O!Play HD2.
ASUS O!Play HD2 media player
3-15
Page 60
4. Open the web browser of your
computer that is correctly connected
to a NAS network.
5. Enter
the same IP address that is
set up on your O!Play HD2.
To obtain the IP address of your
O!Play HD2, press to launch
the Setup menu. Select System >
Network Info, then press .
6. Enter the necessary setting for the server you selected, then press Apply to
start using NAS function.
Server list on your O!Play HD2
ServerDescription
Samba allows le and print sharing between computers running
SAMBA Server
FTP Server
iTune Server
BT Download
BT Info
* Refer to the related websites to get more information about these servers.
Windows and computers running Unix. O!Play HD2 can act as a
SAMBA client, allowing you to stream media from your PC directly
to play Full HD media fast and efciently with no slow down.
File Transfer Protocol (FTP) is a standard network protocol used to
copy a le from one host to another over a TCP/IP‐based network,
such as the Internet. FTP is used with user‐based password
authentication or with anonymous user access. You can access the
device from any PC and copy les to and from it.
O!Play HD2 can work as an iTunes server to share music and
videos within a local network. You can save the mp3 les on O!Play
HD2 NAS instead of different computers at home, and then play
the les on O!Play HD2 NAS by iTunes player by any computer in
streaming way.
BitTorrent is a peer‐to‐peer le sharing protocol used for distributing
large amounts of data. It allows users to distribute large amounts
of data without the heavy demands on their computers that would
be needed for standard Internet hosting. The protocol works as
an alternative data distribution method that makes even small
computers with low bandwidth capable of participating in large data
transfers.
This displays the detailed information about the BT download
status.
3-16
Chapter 3: Using your O!Play HD2 media player
Page 61
Using iPhone to control your O!Play HD2
You may use iPhone to control your O!Play HD2 via the internet link.
• Ensure that your O!Play HD2 is correctly connected to the network. Refer to
Chapter 2 for more details on connecting to a network.
• Ensure that the router connected to your O!Play HD2 suppots the WiFi
function.
To use iPhone to control your O!Play HD2:
1. Turn on the WiFi function on your iPhone, and connect it to your O!Play HD2.
2. Click Safari on your iPhone, then enter the same IP address that is set up
on your O!Play HD2.
To obtain the IP address of your
O!Play HD2, press to launch
the Setup menu. Select System >
Network Info, then press .
2. The below screen appears on your iPhone. Now you can use iPhone to
control your O!Play HD2.
Navigation/OK
keys
Displays the
home menu
Returns to the
previous screen
Selects the movie, music,
and photo effects
Displays the
le name, le
type, and time.
You may have additional function tabs for different modes. Refer to below
table for details.
ModesAdditional function tabs
Movies
MusicPrev, Next, Play/Pause, Mute/unMute, and Stop
PhotoPrev, Next, Zoom, Rotate Right 90, Rotate Left 90, and Stop
Prev, Next, Play/Pause, Fast Forward, Fast Rewind, Stop,
and Mute/unMute
ASUS O!Play HD2 media player
3-17
Page 62
3-18
Chapter 3: Using your O!Play HD2 media player
Page 63
Chapter 4
Troubleshooting
Troubleshooting
This section provides answers to some common problems that you may encounter
while installing or using the ASUS O!Play HD2 media player. These problems
require simple troubleshooting that you can perform by yourself. Contact ASUS
Technical Support if you encounter problems not mentioned in this section.
Display
Q1. The media player does not work. You think that the problem
might be with the media player’s power adapter.
• The media player’s power adapter possibly performs the overload
protection function — automatic shutdown during overload conditions,
such as Over Current, Over Voltage, and Over Temperature.
• Disconnect the media player’s power adapter and wait few minutes before
you reinsert the player’s power adapter directly into an outlet. Turn on the
media player again.
• If the problem still exists, contact your retailer.
Q2. The TV screen is blank and the media player power LED remains
off.
• Ensure that the TV is turned on.
• Ensure that the media player’s power adapter and power outlet are
functional.
• Ensure that the media player’s power adapter plug is rmly attached to the
rear panel of the player and to the power outlet.
Q3. I cannot see the Setup Wizard when I turn on the player for the
rst time. The TV screen is blank and the media player power
LED is on.
• Ensure that the TV is turned on.
• Ensure that the AV/HDMI cable is properly connected to the correct
terminals on both the TV and the media player.
• Ensure that your TV is switched to the appropriate video source (AV IN
or HDMI). You may need to use your TV Remote control to change video
sources.
4-1
Page 64
• Turn off your media player and wait for a few minutes before turning it on
again or press the reset button at the back panel.
• Ensure that the HDMI resolution of your TV supports 720p, 1080i, or
1080p.
• After turing off your media player, wait for a few seconds until the poweroff process is completed. During the power-off process, do not press the
remote control repeatedly. Abnormal power-off might lead your media
player to crash. If the situation appears to your media player, re-plug the
power adapter.
Q4. The TV screen is blinking and fuzzy.
• Ensure that the AV/HDMI cable is properly connected to the correct
terminals on both the TV and the media player.
• Ensure that the media player power LED is on.
• Ensure that the TV system setting matches the system used in your
country.
• Ensure that the correct video resolution option is selected.
Q5. I cannot nd any of my music, movie, or photo les.
• Ensure that your Media Server (such as USB storage device) or your
computer is switched on and that the device is not in standby mode.
• If using a wired network, check that the Ethernet cable is properly attached
to the Media Player and to a network router. Check that the router is
switched on.
• Check that the Media server (your computer) used has shared the Media
Player as a client and that the les are also shared.
• If you are using static IP addresses, check that the IP address is in the
same range as other addresses on your network. Verify that the address is
not already used by another PC or device.
• Ensure that the les you are sharing use a supported le format.
Q6. Certain les cannot be played on the Media Player.
The Media Player may not support the video or audio format used in the le.
For information on what media formats the Media Player supports, refer to
Specications summary in Chapter 1.
Q7. Only one video/music/photo is played when I selected it. How do
I play the entire list?
When selecting a video/music/photo to play, pressing the OK button on the
remote control plays just the selected le while pressing the PLAY/PAUSE
button plays the entire list of les.
4-2
Chapter 4: Troubleshooting
Page 65
Q8. The LEDs on the Ethernet port do not blink and my wired
connection does not work.
• Ensure that the LAN Cable plug is rmly connected to the Ethernet port of
the Media Player’s rear panel.
• Try to replace a functional LAN cable.
• Try to reconnect the LAN cable to the Media Player to keep the network
connection active.
Audio
Q1. There is no sound.
• Ensure the volume on the entertainment unit is not on mute mode.
• Navigate to the Setup > System screen and ensure that the correct Digital
output setting is enabled. If you are using the multiple audio Amplier, the
RAW setting should be enabled.
• If you are watching a video that supports multiple audio channels, press
Audio Options button repeatedly until the intended audio channel is
displayed.
Q2. I cannot hear any sound when I am playing music les.
• Ensure that the audio cables are properly connected.
• If the audio cables are connected to your TV, the TV must be turned on to
play any music les.
• If the audio cables are connected to your stereo, ensure that the stereo
is on and you have the correct stereo input selected. If you are having
trouble selecting the correct audio source, refer to the instructions that
came with your stereo.
Video
Q1. There is no subtitle.
Ensure that the le format of the subtitle is TXT.
Q2. How do I get the subtitle to play?
You have to put the subtitle le in the same folder of the movie le. Ensure that
the subtitle name is the same with the movie le (ex. movie.avi, movie.srt).
Q3. A few of my Music les do not appear.
The Media Player supports the most common music le formats. However,
there are almost an innite variety of bit rates and sample rates. If a le is not
displayed on the screen, it most likely uses an unsupported bit rate or sample
rate. Only use les with supported formats, bit rates, and sample rates.
ASUS O!Play HD2 media player
4-3
Page 66
USB storage device
Q1. I cannot nd any of my music, movie, or photo les.
• Ensure that your USB storage device (USB Flash/USB HDD ) is not in
standby mode.
• Ensure that the les are supported le format.
Q2. The Media Player does not recognize my USB storage device.
Your USB storage device may not be detected because of problems with the
USB hardware driver, USB cable, or longer system response time. Try to replug the USB storage device to the USB port again, replace a new USB cable,
or use another USB storage device.
Remote Control
Q1. The media player remote control is not working.
• Ensure that the batteries are properly inserted.
• The batteries may already be drained out. Replace the batteries with new
ones.
• Ensure that the path between the remote control and the media player is
not blocked.
Firmware Updates
Q1. What version of rmware do I have? How do I upgrade it?
• Check the rmware version before the upgrade process. If the rmware is
the latest version, you will not need to update the rmware.
• Go to
• If you are still unable to update the rmware, reset the system and perform
• The rmware update manual is available in PDF le (included in the
• If the O!Play HD2 device is shut down or powered off during the software
4-4
Setup > Firmware Setup to perform the rmware upgrade process.
the updating process again.
updated rmware folder). Visit the ASUS support site at http://support.
asus.com/ for more details.
installation, the update will fail. If the O!Play HD2 will not power on, you
will need to reset the device. This will restore the device back to its default
settings. The rmware update can be attempted again at this point.
Chapter 4: Troubleshooting
Page 67
Wired and Internet connections
Q1. I cannot connect to the wired network.
You need to select either DHCP IP (AUTO) or FIX IP (MANUAL) as your
setup type. If you select DHCP IP (AUTO), key in the DNS server’s IP
address. The DNS server automatically assigns an IP address for your media
player.
If you select FIX IP (MANUAL), key in the IP address and Subnet Mask.
Q2. How do I share folders in the network?
If you want to access shared network les, ensure that the network computer’s
les are shared on the network. For more details, refer to the section Sharing
les over the network.
Q3. Can I use NAS function when browsing movie, music, photo or
Internet Media Service?
No. You have to turn off NAS function when you are enjoying media. We
suggest that you use NAS function when you are not browsing any media.
Q4. There is too much lag while I am watching an online media
website.
• Slow connection or high Internet trafc may cause this problem. Try
watching the online media during off-peak hours.
• You may have limited bandwidth usage on your network. Contact your
Internet Service Provider (ISP) to inquire about increasing your bandwidth
for your network connection.
Q5. Why do I encounter network lag when I use Internet media
services such as Internet radio and TV stations?
Depending on the streaming situation or network stability/trafc, you might
need to wait for a few minutes to use the Internet media services.
Q6. If I have a “Domain network, can I use O!Play HD2?
O!Play HD2 does not ofcially support streaming from a domain server or a
computer attached to a domain. While it is certainly possible, our technical
support will be unabled to provide assistance regarding this conguration.
Contact your domain administrator or Microsoft Support for assistance.
Q7. Can I access other online media websites?
No. You can only access the online media services offered on your ASUS
O!Play HD2 Media Player. Please note that the content is constantly added
and updated. Visit the ASUS website for the latest information.
ASUS O!Play HD2 media player
4-5
Page 68
Operation/function failure
Q1. An operation/function failed on my HD media player.
Disconnect the AC adapter from the power source, then plug it in again. If you
still encounter the same problem, contact the ASUS Technical Support.
4-6
Chapter 4: Troubleshooting
Page 69
Appendices
Notices
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and
Restriction of Chemicals) regulatory framework, we published the chemical
substances in our products at ASUS REACH website at http://csr.asus.com/
english/REACH.htm.
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
A-1
Page 70
Canadian Department of Communications Statement
This digital device does not exceed the Class B limits for radio noise emissions
from digital device set out in the Radio Interference Regulations of the Canadian
Department of Communications.
This class B digital device complies with Canadian ICES-003.
GNU General Public License
Licensing information
This product includes copyrighted third-party software licensed under the terms of
the GNU General Public License. Please see The GNU General Public License
for the exact terms and conditions of this license. We include a copy of the GPL
with every CD shipped with our product. All future rmware updates will also
be accompanied with their respective source code. Please visit our web site for
updated information. Note that we do not offer direct support for the distribution.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies of this license
document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to
share and change it. By contrast, the GNU General Public License is intended
to guarantee your freedom to share and change free software--to make sure the
software is free for all its users. This General Public License applies to most of the
Free Software Foundation’s software and to any other program whose authors
commit to using it. (Some other Free Software Foundation software is covered
by the GNU Library General Public License instead.) You can apply it to your
programs, too.
A-2
Appendices
Page 71
When we speak of free software, we are referring to freedom, not price. Our
General Public Licenses are designed to make sure that you have the freedom to
distribute copies of free software (and charge for this service if you wish), that you
receive source code or can get it if you want it, that you can change the software or
use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny
you these rights or to ask you to surrender the rights. These restrictions translate
to certain responsibilities for you if you distribute copies of the software, or if you
modify it.
For example, if you distribute copies of such a program, whether gratis or for a
fee, you must give the recipients all the rights that you have. You must make sure
that they, too, receive or can get the source code. And you must show them these
terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you
this license which gives you legal permission to copy, distribute and/or modify the
software.
Also, for each author’s protection and ours, we want to make certain that everyone
understands that there is no warranty for this free software. If the software is
modied by someone else and passed on, we want its recipients to know that what
they have is not the original, so that any problems introduced by others will not
reect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to
avoid the danger that redistributors of a free program will individually obtain patent
licenses, in effect making the program proprietary. To prevent this, we have made it
clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modication follow.
Terms & conditions for copying, distribution, & modication
0. This License applies to any program or other work which contains a notice
placed by the copyright holder saying it may be distributed under the terms
of this General Public License. The “Program”, below, refers to any such
program or work, and a “work based on the Program” means either the
Program or any derivative work under copyright law: that is to say, a work
containing the Program or a portion of it, either verbatim or with modications
and/or translated into another language. (Hereinafter, translation is included
without limitation in the term “modication”.) Each licensee is addressed as
“you”.
ASUS O!Play HD2 media player
A-3
Page 72
Activities other than copying, distribution and modication are not covered
by this License; they are outside its scope. The act of running the Program is
not restricted, and the output from the Program is covered only if its contents
constitute a work based on the Program (independent of having been made
by running the Program). Whether that is true depends on what the Program
does.
1. You may copy and distribute verbatim copies of the Program’s source code
as you receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License
and to the absence of any warranty; and give any other recipients of the
Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may
at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it,
thus forming a work based on the Program, and copy and distribute such
modications or work under the terms of Section 1 above, provided that you
also meet all of these conditions:
a) You must cause the modied les to carry prominent notices stating that
you changed the les and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or
in part contains or is derived from the Program or any part thereof, to be
licensed as a whole at no charge to all third parties under the terms of this
License.
c) If the modied program normally reads commands interactively when run,
you must cause it, when started running for such interactive use in the most
ordinary way, to print or display an announcement including an appropriate
copyright notice and a notice that there is no warranty (or else, saying that
you provide a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this License.
(Exception: if the Program itself is interactive but does not normally print such
an announcement, your work based on the Program is not required to print
an announcement.)
These requirements apply to the modied work as a whole. If identiable
sections of that work are not derived from the Program, and can be
reasonably considered independent and separate works in themselves,
then this License, and its terms, do not apply to those sections when you
distribute them as separate works. But when you distribute the same sections
as part of a whole which is a work based on the Program, the distribution
of the whole must be on the terms of this License, whose permissions for
other licensees extend to the entire whole, and thus to each and every part
regardless of who wrote it.
A-4
Appendices
Page 73
Thus, it is not the intent of this section to claim rights or contest your rights to
work written entirely by you; rather, the intent is to exercise the right to control
the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with
the Program (or with a work based on the Program) on a volume of a storage
or distribution medium does not bring the other work under the scope of this
License.
3. You may copy and distribute the Program (or a work based on it, under
Section 2) in object code or executable form under the terms of Sections 1
and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source
code, which must be distributed under the terms of Sections 1 and 2 above
on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give
any third party, for a charge no more than your cost of physically performing
source distribution, a complete machine-readable copy of the corresponding
source code, to be distributed under the terms of Sections 1 and 2 above on
a medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to
distribute corresponding source code. (This alternative is allowed only for
noncommercial distribution and only if you received the program in object
code or executable form with such an offer, in accord with Subsection b
above.)
The source code for a work means the preferred form of the work for making
modications to it. For an executable work, complete source code means
all the source code for all modules it contains, plus any associated interface
denition les, plus the scripts used to control compilation and installation of
the executable. However, as a special exception, the source code distributed
need not include anything that is normally distributed (in either source or
binary form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component itself
accompanies the executable.
If distribution of executable or object code is made by offering access to
copy from a designated place, then offering equivalent access to copy the
source code from the same place counts as distribution of the source code,
even though third parties are not compelled to copy the source along with the
object code.
4. You may not copy, modify, sublicense, or distribute the Program except as
expressly provided under this License. Any attempt otherwise to copy, modify,
sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or
rights, from you under this License will not have their licenses terminated so
long as such parties remain in full compliance.
ASUS O!Play HD2 media player
A-5
Page 74
5. You are not required to accept this License, since you have not signed it.
However, nothing else grants you permission to modify or distribute the
Program or its derivative works. These actions are prohibited by law if you do
not accept this License. Therefore, by modifying or distributing the Program
(or any work based on the Program), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying, distributing or
modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program),
the recipient automatically receives a license from the original licensor to
copy, distribute or modify the Program subject to these terms and conditions.
You may not impose any further restrictions on the recipients’ exercise of the
rights granted herein. You are not responsible for enforcing compliance by
third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement
or for any other reason (not limited to patent issues), conditions are imposed
on you (whether by court order, agreement or otherwise) that contradict
the conditions of this License, they do not excuse you from the conditions
of this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as
a consequence you may not distribute the Program at all. For example, if a
patent license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then the only
way you could satisfy both it and this License would be to refrain entirely from
distribution of the Program.
If any portion of this section is held invalid or unenforceable under any
particular circumstance, the balance of the section is intended to apply and
the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents
or other property right claims or to contest validity of any such claims; this
section has the sole purpose of protecting the integrity of the free software
distribution system, which is implemented by public license practices. Many
people have made generous contributions to the wide range of software
distributed through that system in reliance on consistent application of
that system; it is up to the author/donor to decide if he or she is willing to
distribute software through any other system and a licensee cannot impose
that choice.
This section is intended to make thoroughly clear what is believed to be a
consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries
either by patents or by copyrighted interfaces, the original copyright holder
who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is
permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
A-6
Appendices
Page 75
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will be
similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If the Program
species a version number of this License which applies to it and “any
later version”, you have the option of following the terms and conditions
either of that version or of any later version published by the Free Software
Foundation. If the Program does not specify a version number of this
License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free programs
whose distribution conditions are different, write to the author to ask
for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make
exceptions for this. Our decision will be guided by the two goals of preserving
the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.
NO WARRANTY
11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS
NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING
THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE
THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED
TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER
PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING
ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM
(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY
OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
ASUS O!Play HD2 media player
A-7
Page 76
ASUS contact information
ASUSTeK COMPUTER INC.
Address 5 Li-Te Road, Peitou, Taipei, Taiwan 11259
Telephone +886-2-2894-3447
Fax +886-2-2890-7798
E-mail info@asus.com.tw
Web site www.asus.com.tw
Technical Support
Telephone +86-21-38429911
Online support support.asus.com
ASUS COMPUTER INTERNATIONAL (America)
Address 800 Corporate Way, Fremont, CA 94539, USA
Telephone +1-510-739-3777
Fax +1-510-608-4555
Web site usa.asus.com
Technical Support
Telephone +1-812-282-2787
Support fax +1-812-284-0883
Online support support.asus.com
ASUS COMPUTER GmbH (Germany and Austria)
Address Harkort Str. 21-23, D-40880 Ratingen, Germany
Fax +49-2102-959911
Web site www.asus.de
Online contact www.asus.de/sales
Technical Support
Component Telephone +49-1805-010923*
System/Notebook/Eee/LCD Telephone +49-1805-010920*
Support Fax +49-2102-9599-11
Online support support.asus.com
* EUR 0.14/minute from a German xed landline; EUR 0.42/minute from a mobile phone.
A-8
Appendices
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.