No part of this manual may be reproduced, transcribed, transmitted, or translated in
any language, in any form or by any means, except duplication of documentation by
the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners’ benefit, without intent to infringe.
Disclaimer:
Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed
as a commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this manual.
With respect to the contents of this manual, ASRock does not provide warranty of
any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the manual or product.
3. Power Menu ..................................................................... 27
4. Boot Menu ......................................................................... 28
5. Exit Menu .......................................................................... 29
3
Chapter 1 Introduction
Thank you for purchasing ASRock P4i45G / P4i45GL / P4i45GV motherboard, a
reliable motherboard produced under ASRock’s consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRock’s
commitment to quality and endurance.
Chapter 1 and 2 of this manual contain introduction of the motherboard and step-bystep installation guide for new DIY system builders. Chapter 3 and 4 contain basic
BIOS setup and Support CD information.
For advanced users’ reference, the Appendix appearing on page 23 offers more
advanced BIOS setup information.
Because the motherboard specifications and the BIOS software
might be updated, the content of this manual will be subject to
change without notice. In case any modifications of this manual
occur, the updated version will be available on ASRock website
without further notice.
ASRock website http://www.asrock.com
1.1 Package Contents
ASRock P4i45G or P4i45GL or P4i45GV motherboard
(Micro ATX form factor: 9.6" x 9.6", 24.4 x 24.4 cm)
ASRock P4i45G / P4i45GL / P4i45GV Quick Installation Guide
ASRock Intel-Intel Support CD
1 cable for IDE devices (1 x ATA 66 / 100)
1 cable for floppy drive (1 x ribbon cable)
1 ASRock I/O shield
1 COM port bracket
4
1.2 Specifications
Platform:Micro ATX form factor (9.6" x 9.6", 24.4 x 24.4 cm)
CPU:Socket 478 for Intel® Pentium® 4
Chipsets:North Bridge on P4i45G motherboard: Intel® 845G chipsets,
standard FSB 533 MHz, Max. 800 MHz (see NOTE on page 7),
supports Hyper-Threading Technology (see CAUTION 1);
North Bridge on P4i45GL motherboard: Intel® 845GL chipsets,
standard FSB 400 MHz (see CAUTION 2),
Max. 533 MHz (see NOTE on page 7);
North Bridge on P4i45GV motherboard: Intel® 845GV chipsets,
standard FSB 533 MHz, supports Hyper-Threading Technology
(see CAUTION 1);
South Bridge: Intel
Clock Generator:100 MHz - 248MHz
Memory:2 slots for DDR: DIMM1 and DIMM2 (PC1600/ PC2100), Max. 2GB;
2 slots for SDR: DIMM3 and DIMM4 (PC133), Max. 2GB
IDE:IDE1: ATA 100 / Ultra DMA Mode 5;
IDE2: ATA 100 / Ultra DMA Mode 5;
Can connect up to 4 IDE devices
Floppy Port:Supports floppy disk drive
Audio:5.1 channels AC’97 Audio
PCI LAN:Speed: 802.3u (10/100 Ethernet), supports Wake-On-LAN
Hardware Monitor: CPU temperature sensing (ASRock U-COP);
CPU overheat shutdown to protect CPU life (ASRock U-COP)
(see CAUTION 3); Chassis temperature sensing;
Voltage monitoring: +12V, +5V, +3V, Vcore;
CPU fan tachometer; Chassis fan tachometer
PCI slots:3 slots with PCI Specification 2.2
AGP slot (only on P4i45G Motherboard):
1 AGP slot, supports 1.5V, 4X AGP card (see CAUTION 4)
AMR slot:1 slot, supports ASRock MR card (optional)
USB 2.0:4 default USB 2.0 ports and 1 extra set of header for 2 additional
USB 2.0 ports upgrade (see CAUTION 5)
ASRock I/OTM:PS/2: 1 keyboard port / 1 mouse port;
1 RJ 45 port; 4 rear default USB 2.0 ports;
1 VGA port; 1 parallel port: ECP/EPP support;
Audio Jack: Line Out/ Line In/ Microphone + Game port
®
ICH4
/ Celeron
®
processor
5
BIOS:AMI legal BIOS; Supports “Plug and Play”;
ACPI 1.1 compliance wake up events;
Supports jumperfree; SMBIOS 2.3.1 support;
CPU frequency stepless control
(only for advanced users’ reference, see CAUTION 6)
OS:Microsoft® Windows® 98SE / ME / 2000 / XP compliant
CAUTION!
1. About the setting of “Hyper Threading Technology”, please check
page 23.
2. If the installed CPU runs with the front side bus frequency at
533 MHz on P4i45GL motherboard, it will only support DDR 266.
3. While CPU overheat is detected, the system will automatically
shutdown. Please check if the CPU fan on the motherboard functions
properly before you resume the system. To improve heat dissipation,
remember to spray thermal grease between the CPU and the heatsink
when you install the PC system.
4. Do NOT use 3.3V AGP card on P4i45G’s AGP slot! It may cause
permanent damage!
5. Power Management for USB 2.0 works fine under Microsoft
Windows® XP. It may not work properly under Microsoft® Windows
98/ME/2000. Please refer to Microsoft® official document at
http://www.microsoft.com/HWDEV/BUS/usb/USB2support.asp
6. Although P4i45G / P4i45GL / P4i45GV offers stepless control, it is not
recommended to perform over clocking. When the CPU frequency of
P4i45G / P4i45GL / P4i45GV is set to perform over clocking, other
clocks, such as PCI clock, AGP clock, and Memory clock will also be
overclocked proportionally. Frequencies other than the recommended
CPU bus frequencies may cause the instability of the system or
damage the CPU and the motherboard.
®
®
6
NOTE
P4i45G and P4i45GL may be fine tuned to support higher CPU front side bus frequencies on
certain conditions. Please refer to the table below for the details.
CPU FSB Configuration Note
P4i45G800 MHz 1. Set the “FSB” jumper to “TEST” mode (see page 15).
2. Only support 1 DDR 333 memory module.
P4i45GL533 MHz Only support DDR
Since the memory types are changing rapidly, please visit ASRock website
(http://www.asrock.com/support/index.htm) for the latest memory support list.