No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Disclaimer:Disclaimer:
Disclaimer:
Disclaimer:Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate”
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0 Motherboard
EnglishEnglish
EnglishEnglish
English
33
3
33
I/O PI/O P
I/O P
I/O PI/O P
anelanel
anel
anelanel
N68- N68-
N68-
N68- N68-
10
1PS/2 Mouse Port (Green)6USB 2.0 Ports (USB34)
2RJ-45 Port*7USB 3.0 Ports (USB3_34)
3Line In (Light Blue)**8D-Sub Port
4Front Speaker (Lime)**9COM Port
5Microphone (Pink)**10 PS/2 Keyboard Port (Purple)
N68- N68-
N68-
N68- N68-
GS4/USB3 FX R2.0:GS4/USB3 FX R2.0:
GS4/USB3 FX R2.0:
GS4/USB3 FX R2.0:GS4/USB3 FX R2.0:
1
9
GS4 FX R2.0:GS4 FX R2.0:
GS4 FX R2.0:
GS4 FX R2.0:GS4 FX R2.0:
1
2
8
7
2
3
4
5
6
English
EnglishEnglish
EnglishEnglish
44
4
44
10
1PS/2 Mouse Port (Green)6USB 2.0 Ports (USB34)
2RJ-45 Port*7USB 2.0 Ports (USB12)
3Line In (Light Blue)**8D-Sub Port
4Front Speaker (Lime)**9COM Port
5Microphone (Pink)**10 PS/2 Keyboard Port (Purple)
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0 Motherboard
9
8
7
6
3
4
5
* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED
indications.
Activity/Link LEDSPEED LED
Status Description Status Description
LAN Port LED Indications
ACT/LINK
LED
SPEED
LED
Off No Activity Off 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
Green 1Gbps connection
** To configure 7.1 CH HD Audio, it is required to use an HD front panel audio module and
enable the multi-channel audio feature through the audio driver.
Please set Speaker Configuration to “7.1 Speaker” in the Realtek HD Audio Manager.
LAN Port
Function of the Audio Ports in 7.1-channel Configuration
PortFunction
Light Blue (Rear panel)Rear Speaker Out
Lime (Rear panel)Front Speaker Out
Pink (Rear panel)Central /Subwoofer Speaker Out
Lime (Front panel)Side Speaker Out
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0 Motherboard
EnglishEnglish
EnglishEnglish
English
55
5
55
1.1.
IntroductionIntroduction
1.
Introduction
1.1.
IntroductionIntroduction
Thank you for purchasing ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0
motherboard, a reliable motherboard produced under ASRock’s consistently stringent
quality control. It delivers excellent performance with robust design conforming to ASRock’s
commitment to quality and endurance.
Because the motherboard specifications and the BIOS software might
be updated, the content of this manual will be subject to change without
notice. In case any modifications of this manual occur, the updated
version will be available on ASRock website without further notice. You
may find the latest VGA cards and CPU support lists on ASRock website
as well. ASRock website
If you require technical support related to this motherboard, please visit
our website for specific information about the model you are using.
www.asrock.com/support/index.asp
1.11.1
PP
ackack
1.1
1.11.1
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0 Motherboard
(Micro ATX Form Factor)
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0X Quick Installation Guide
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0 Support CD
2 x Serial ATA (SATA) Data Cables (Optional)
1 x I/O Panel Shield
age Contentsage Contents
P
ack
age Contents
PP
ackack
age Contentsage Contents
http://www.asrock.com
English
EnglishEnglish
EnglishEnglish
66
6
66
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0 Motherboard
1.2 Specifications1.2 Specifications
1.2 Specifications
1.2 Specifications1.2 Specifications
Platform- Micro ATX Form Factor
- Solid Capacitor design
CPU- Support for Socket AM3+ processors
- Support for AM3 processors: AMD PhenomTM II X6 / X4 / X3 /
X2 (except 920 / 940) / Athlon II X4 / X3 / X2 / Sempron
processors (see CAUTION 1)
- Supports 8-Core CPU
- 4 + 1 Power Phase design
- Supports UCC feature (Unlock CPU Core) (see CAUTION 2)
- Supports D-Sub with max. resolution up to 1920x1440
@ 60Hz
Audio- 7.1 CH HD Audio (Realtek ALC887 Audio Codec)
* To configure 7.1 CH HD Audio, it is required to use an HD front
panel audio module and enable the multi-channel audio feature
through the audio driver.
- Supports Surge Protection (ASRock Full Spike Protection)
- ELNA Audio Caps
LAN- Gigabit LAN 10/100/1000 Mb/s
- Giga PHY Realtek RTL8211E
- Supports Wake-On-LAN
- Supports Lightning/ESD Protection (ASRock Full Spike
Protection)
- Supports Energy Efficient Ethernet 802.3az
EnglishEnglish
EnglishEnglish
English
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0 Motherboard
77
7
77
English
EnglishEnglish
EnglishEnglish
- Supports PXE
Rear Panel I/ON68-GS4/USB3 FX R2.0:
- 1 x PS/2 Mouse Port
- 1 x PS/2 Keyboard Port
- 1 x Serial Port: COM1
- 1 x D-Sub Port
- 2 x USB 2.0 Ports (Supports ESD Protection (ASRock Full
Spike Protection))
- 2 x USB 3.0 Ports (Etron EJ188H) (PCIE GEN1) (Supports
ESD Protection (ASRock Full Spike Protection))
- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)
- HD Audio Jacks: Line in / Front Speaker / Microphone
Rear Panel I/ON68-GS4 FX R2.0:
- 1 x PS/2 Mouse Port
- 1 x PS/2 Keyboard Port
- 1 x Serial Port: COM1
- 1 x D-Sub Port
- 4 x USB 2.0 Ports (Supports ESD Protection (ASRock Full
Spike Protection))
- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)
- HD Audio Jacks: Line in / Front Speaker / Microphone
Storage- 4 x SATA2 3.0 Gb/s Connectors, support RAID (RAID 0,
RAID 1, RAID 0+1, RAID 5 and JBOD), NCQ and Hot Plug
Connector- 1 x Print Port Header
- 1 x Chassis Intrusion Header
- 1 x CPU Fan Connector (4-pin)
- 1 x Chassis Fan Connector (3-pin)
- 1 x 24 pin ATX Power Connector
- 1 x 8 pin 12V Power Connector
- 1 x Front Panel Audio Connector
- 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD
Protection (ASRock Full Spike Protection))
- 1 x USB 3.0 Header by Etron EJ188H (PCIE GEN1) (Supports
2 USB 3.0 ports) (Supports ESD Protection (ASRock Full Spike
Protection)) (for N68-GS4/USB3 FX R2.0 only)
BIOS Feature- AMI Legal BIOS
- Supports "Plug and Play"
- ACPI 1.1 Compliant wake up events
- Supports jumperfree
- SMBIOS 2.3.1 support
- CPU, VCCM, NB Voltage multi-adjustment
88
8
88
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0 Motherboard
Hardware- CPU temperature sensing
Monitor- Chassis temperature sensing
64-bit / 8 32-bit / 8 64-bit / 7 32-bit / 7 64-bit / VistaTM 32-bit /
VistaTM 64-bit / XP 32-bit / XP 64-bit (see CAUTION 5)
Certifications- FCC, CE, WHQL
- ErP/EuP ready (ErP/EuP ready power supply is required)
* For detailed product information, please visit our website:
WARNING
Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
the third-party overclocking tools. Overclocking may affect your system stability, or
even cause damage to the components and devices of your system. It should be
done at your own risk and expense. We are not responsible for possible damage
caused by overclocking.
http://www.asrock.com
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0 Motherboard
EnglishEnglish
EnglishEnglish
English
99
9
99
CAUTION!
1. This motherboard supports CPU up to 140W. Please refer to our website for
CPU support list. ASRock website
2. ASRock UCC (Unlock CPU Core) feature simplifies AMD CPU activation. As
long as a simple switch of the BIOS option “ASRock UCC”, you can unlock
the extra CPU core to enjoy an instant performance boost. When UCC
feature is enabled, the dual-core or triple-core CPU will boost to the quadcore CPU, and some CPU, including quad-core CPU, can also increase L3
cache size up to 6MB, which means you can enjoy the upgrade CPU performance with a better price. Please be noted that UCC feature is supported
with AM3/AM3+ CPU only, and in addition, not every AM3/AM3+ CPU can
support this function because some CPU’s hidden core may be
malfunctioned.
3. Whether 1866/1600MHz memory speed is supported depends on the
AM3/AM3+ CPU you adopt. If you want to adopt DDR3 1866/1600 memory
module on this motherboard, please refer to the memory support list on
our website for the compatible memory modules.
ASRock website
4. Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows® 10
/ 8.1 / 8 / 7 / Vista
such limitation.
5. This motherboard does not support RAID mode under Windows® 10
32-bit / 10 64-bit / 8.1 32-bit / 8.1 64-bit. This motherboard does not
support RAID mode with HDDs of 3TB and above.
http://www.asrock.com
TM
/ XP. For Windows® OS with 64-bit CPU, there is no
http://www.asrock.com
English
EnglishEnglish
EnglishEnglish
1010
10
1010
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0 Motherboard
1.3 Jumpers Setup1.3 Jumpers Setup
1.3 Jumpers Setup
1.3 Jumpers Setup1.3 Jumpers Setup
The illustration shows how jumpers are setup.
When the jumper cap is placed on pins, the
jumper is “Short”. If no jumper cap is placed on
pins, the jumper is “Open”. The illustration
shows a 3-pin jumper whose pin1 and
pin2 are “Short” when jumper cap is placed on
these 2 pins.
JumperSetting
Clear CMOS Jumper
(CLRCMOS1)
(see p.2 or 3, No. 9)
Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes
system setup information such as system password, date, time, and system
setup parameters. To clear and reset the system parameters to default setup,
please turn off the computer and unplug the power cord from the power supply.
After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 on CLRCMOS1
for 5 seconds. However, please do not clear the CMOS right
after you update the BIOS. If you need to clear the CMOS when you just finish
updating the BIOS, you must boot up the system first, and then shut it down
before you do the clear-CMOS action.
If you clear the CMOS, the case open may be detected. Please adjust the
BIOS option “Clear Status” to clear the record of previous chassis intrusion
status.
1_2
Default
2_3
Clear CMOS
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0 Motherboard
1111
11
1111
EnglishEnglish
EnglishEnglish
English
1.4 Onboard Headers and Connectors1.4 Onboard Headers and Connectors
1.4 Onboard Headers and Connectors
1.4 Onboard Headers and Connectors1.4 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper
caps over the headers and connectors will cause permanent damage of the motherboard!
•
Serial ATA2 ConnectorsThese four Serial ATA2 (SATA2)
(SATAII_1 (PORT 0.0):connectors support SATA2
see p.2 or 3, No. 6)or SATA hard disk for internal
SATAII_2
(PORT 0.1)
(SATAII_2 (PORT 0.1):storage devices. The current
see p.2 or 3, No. 5)SATA2 interface allows up to
(SATAII_3 (PORT 1.0):3.0 Gb/s data transfer rate.
SATAII_4
(PORT 1.1)
see p.2 or 3, No. 7)
(SATAII_4 (PORT 1.1):
see p.2 or 3, No. 8)
SATAII_1
(PORT 0.0)
SATAII_3
(PORT 1.0)
English
EnglishEnglish
EnglishEnglish
1212
12
1212
USB 2.0 HeadersThere are two USB 2.0 headers
(9-pin USB5_6)on this motherboard. Each
(see p.2 or 3 No. 13)USB 2.0 header can support two
(9-pin USB7_8)
(see p.2 or 3 No. 12)
USB 3.0 HeaderThere is one USB 3.0 header on
(for N68-GS4/USB3 FX R2.0 only)this motherboard. This USB 3.0
(19-pin USB3_1_2)header can support two USB
(see p.2 No. 18)3.0 ports.
Print Port HeaderThis is an interface for print
(25-pin LPT1)port cable that allows
(see p.2 or 3 No. 14)convenient connection of printer
SLCT
IntA_P_SSRX+
IntA_P_SSRX-
Vbus
Vbus
IntA_P_SSRX-
IntA_P_SSRX+
PE
BUSY
ACK#
SPD7
USB_PWR
P-
1
P-
USB_PWR
IntA_P_SSTX+
IntA_P_SSTX-
GND
GND
IntA_P_SSTX-
IntA_P_SSTX+
SPD5
SPD6
GND
P+
P+
SPD4
GND
DUMMY
GND
IntA_P_D+
IntA_P_D-
GND
GND
IntA_P_D-
SPD2
SPD3
SLIN#
IntA_P_D+
SPD0
SPD1
PINIT#
ERROR#
USB 2.0 ports.
ID
1
STB#
1
devices.
AFD#
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0 Motherboard
Front Panel Audio HeaderThis is an interface for the front
(9-pin HD_AUDIO1)panel audio cable that allows
(see p.2 or 3, No. 17)convenient connection and
1
GND
PRESENCE#
MIC2_R
MIC2_L
MIC_RET
J_SENSE
OUT2_R
OUT_RET
OUT2_L
control of audio devices.
1. High Definition Audio supports Jack Sensing, but the panel wire on
the chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC’97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don’t
need to connect them for AC’97 audio panel.
1
1
PLED+
HDLED+
DUMMY
+5V
PLED-
PWRBTN#
GND
DUMMY
RESET#
GND
HDLED-
SPEAKER
DUMMY
GND
+12V
CHA_FAN_SPEED
System Panel HeaderThis header accommodates
(9-pin PANEL1)several system front panel
(see p.2 or 3 No. 15)functions.
Chassis Speaker HeaderPlease connect the chassis
(4-pin SPEAKER 1)speaker to this header.
(see p.2 or 3 No. 16)
Chassis Fan ConnectorPlease connect a chassis fan
(3-pin CHA_FAN1)cable to this connector and
(see p.2 or 3 No. 10)match the black wire to the
ground pin.
CPU Fan ConnectorPlease connect the CPU fan
(4-pin CPU_FAN1)cable to this connector and
(see p.2 or 3 No. 1)match the black wire to the
1
2
3
4
GND
+12VCPU_FAN_SPEED
FAN_SPEED_CONTROL
ground pin.
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0 Motherboard
1313
13
1313
EnglishEnglish
EnglishEnglish
English
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
Pin 1-3 Connected
3-Pin Fan Installation
English
EnglishEnglish
EnglishEnglish
ATX Power ConnectorPlease connect an ATX power
(24-pin ATXPWR1)supply to this connector.
(see p.p.2 or 3 No. 4)
Though this motherboard provides 24-pin ATX power connector,
12 124
13
12
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your power
supply along with Pin 1 and Pin 13.
20-Pin ATX Power Supply Installation
ATX 12V Power ConnectorPlease note that it is necessary
(8-pin ATX12V1)to connect a power supply with
(see p.2 or 3 No. 2)ATX 12V plug to this connector.
4 8
1 6
1
Failing to do so will cause power
up failure.
Though this motherboard provides 8-pin ATX 12V power connector, it can still
work if you adopt a traditional 4-pin ATX 12V power supply. To use the 4-pin
ATX power supply, please plug your power supply along with Pin 1 and Pin 5.
4-Pin ATX 12V Power Supply Installation
4 8
1 6
24
13
Chassis Intrusion HeaderThis motherboard supports CASE
(2-pin CI1)OPEN detection feature that
(see p.2 or 3 No. 11)detects if the chassis cover has
GND
Signal
1
been removed. This feature
requires a chassis with chassis
intrusion detection design.
1414
14
1414
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0 Motherboard
- 1 x Anschluss für Audio auf der Gehäusevorderseite
- 2 x USB 2.0-Anschlüsse (Unterstützung 4 zusätzlicher
USB 2.0-Anschlüsse) (unterstutzt Schutz gegen
elektrostatische Entladung (ASRock Full Spike Protection))
- 1 x Etron EJ188H USB 3.0-Anschlüsse (PCIE GEN1)
(Unterstützung 2 zusätzlicher USB 3.0-Anschlüsse) (unterstutzt
Schutz gegen elektrostatische Entladung (ASRock Full Spike
Protection)) (N68-GS4/USB3 FX R2.0)
ASRock N68-GS4/USB3 FX R2.0 / N68-GS4 FX R2.0 Motherboard
Loading...
+ 37 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.