ASRock H110 Pro BTC+ Service Manual

Version 1.0
Published June 2017
Copyright©2017 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or tness for a particular purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of prots, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance. “Perchlorate Material-special handling may apply, see ww w.dtsc.ca.gov/hazardouswaste/ perchlorate”
ASRock Website: http://www.asrock.com
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specications 2
1.3 Motherboard Layout 6
1.4 I/O Panel 8
Chapter 2 Installation 10
2.1 Installing the CPU 11
2.2 Installing the CPU Fan and Heatsink 14
2.3 Installing Memory Modules (DIMM) 15
2.4 Expansion Slots (PCI Express Slots) 17
2.5 Jumpers Setup 18
2.6 Onboard Headers and Connectors 19
2.7 PCIe Power Connector Installation Guide 23
2.8 M.2_SSD (NGFF) Module Installation Guide 24
Chapter 3 Software and Utilities Operation 27
3.1 Installing Drivers 27
3.2 ASRock Live Update & APP Shop 28
3.2.1 UI Overview 28
3.2.2 Apps 29
3.2.3 BIOS & Drivers 32
3.2.4 Setting 33
3.3 Enabling USB Ports for Windows® 7 Installation 34
Chapter 4 UEFI SETUP UTILITY 37
4.1 Introduction 37
4.1.1 UEFI Menu Bar 37
4.1.2 Navigation Keys 38
4.2 Main Screen 39
4.3 OC Tweaker Screen 40
4.4 Advanced Screen 48
4.4.1 CPU Conguration 49
4.4.2 Chipset Conguration 51
4.4.3 Storage Conguration 54
4.4.4 Super IO Conguration 55
4.4.5 ACPI Conguration 56
4.4.6 USB Conguration 58
4.4.7 Trusted Computing 59
4.5 Tools 60
4.6 Hardware Health Event Monitoring Screen 61
4.7 Security Screen 63
4.8 Boot Screen 64
4.9 Exit Screen 67
H110 Pro BTC+
Chapter 1 Introduction
ank you for purchasing ASRock H110 Pro BTC+ motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRock’s
commitment to quality and endurance.
In this documentation, Chapter 1 and 2 contains the introduction of the
motherboard and step-by-step installation guides. Chapter 3 contains the operation
guide of the soware and utilities. Chapter 4 contains the conguration guide of
the BIOS setup.
Becau se the motherboard specications and the BIOS soware might be updated, the content of this documentation will be subject to change without notice. In case any modications of this documentation occur, the updated version will be available on ASRock’s website w ithout f urther notice. If you require technical support relate d to this motherboard, please vi sit our website for s pecic information about the model you are using. You may nd the l atest VGA cards and CPU suppor t list on ASRock’s website a s well. ASRock website ht tp://www.a srock.com.

1.1 Package Contents

ASRock H110 Pro BTC+ Motherboard (ATX Form Factor)
•
ASRock H110 Pro BTC+ Quick Installation Guide
•
ASRock H110 Pro BTC+ Support CD
•
1 x I/O Panel Shield
•
2 x Serial ATA (SATA) Data Cables (Optional)
•
1 x Screw for M.2 Socket (Optional
•
English
1
1.2 Specications
Platform
CPU
Chipset
Memory
•
•
•
•
•
•
•
•
•
•
•
* 7th Gen Intel® CPU supports DDR4 up to 2400; 6th Gen Intel®
CPU supports DDR4 up to 2133.
•
•
•
•
ATX Form Factor
Solid Capacitor design
Supports 7th and 6th Generation Intel® CoreTM i7/i5/i3/
Pentium®/Celeron® Processors (Socket 1151)
Supports CPU up to 91W
Digi Power design
8 Power Phase design
Supports Intel® Turbo Boost 2.0 Technology
Intel® H110
Dual Channel DDR4 Memory Technology
2 x DDR4 DIMM Slots
Supports DDR4 2400/2133 non-ECC, un-buered memory*
Supports ECC UDIMM memory modules (operate in non-
ECC mode)
Max. capacity of system memory: 32GB
Supports Intel® Extreme Memory Prole (XMP) 2.0
15μ Gold Contact in DIMM Slots
English
2
Expansion Slot
Graphics
1 x PCI Express 3.0 x16 Slot (PCIE2: x16 mode)*
•
* Supports NVMe SSD as boot disk
12 x PCI Express 2.0 x1 Slots
•
Intel® HD Graphics Built-in Visuals and the VGA outputs
•
can be supported only with processors which are GPU
integrated.
Supports Intel® HD Graphics Built-in Visuals : Intel® Quick
•
Sync Video with AVC, MVC (S3D) and MPEG-2 Full
HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD
Technology, Intel® InsiderTM, Intel® HD Graphics
Gen9 LP, DX11.3, DX12
•
HWAEncode/Decode: VP8, HEVC 8b, VP9, HEVC 10b (For
•
7th Gen Intel® CPU)
Audio
LAN
H110 Pro BTC+
HWA Encode/Decode: VP8 , HEVC 8b; GPU/SWEncode/
•
Decode: VP9, HEVC 10b (For 6th Gen Intel® CPU)
Max. shared memory 1024MB
•
* e size of ma ximum shared memory may vary from dierent
operating systems.
Supports DVI-D with ma x. resolution up to 1920x1200 @
•
60Hz
Supports Accelerated Media Codecs: HEVC, VP8, VP9
•
Supports HDCP with DVI-D Port
•
Supports Full HD 1080p Blu-ray (BD) playback with DVI-D
•
Port
7.1 CH HD Audio (Realtek ALC887 Audio Codec)
•
* To congure 7.1 CH HD Audio, it is required to use an HD
front panel audio module and enable the multi-channel audio
feature through the audio driver.
Supports Surge Protection
•
ELNA Audio Caps
•
Gigabit LAN 10/100/1000 Mb/s
•
Giga PHY Intel® I219V
•
Supports Wake-On-LAN (Supported on Black PCIe Slots
•
only)
Supports Lightning/ESD Protection
•
Supports Energy Ecient Ethernet 802.3az
•
Supports PXE
•
Rear Panel I/O
1 x PS/2 Mouse Port
•
1 x PS/2 Keyboard Port
•
1 x DVI-D Port
•
4 x USB 2.0 Ports (Supports ESD Protection)
•
2 x USB 3.0 Ports (Supports ESD Protection)
•
1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
•
LED)
HD Audio Jacks: Line in / Front Speaker / Microphone
•
English
3
Storage
Connector
4 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and
•
Hot Plug*
* If M2_1 is occupied by a SATA-type M.2 device, SATA3_0 will
be disabled.
1 x M.2 Socket, supports M Key t ype 2230/2242/2260/2280
•
M.2 SATA3 6.0 Gb/s module
1 x Print Port Header
•
1 x COM Port Header
•
1 x TPM Header
•
1 x Chassis Intrusion and Speaker Header
•
1 x CPU Fan Connector (4-pin)
•
* e CPU Fan Connector supports the CPU fan of ma ximum
1A (12W) fan power.
2 x Chassis Fan Connectors (4-pin)
•
1 x 24 pin ATX Power Connector
•
1 x 8 pin 12V Power Connector
•
2 x PCIe Power Connectors
•
1 x SATA Power Connector
•
1 x Front Panel Audio Connector
•
1 x USB 2.0 Header (Supports 2 USB 2.0 ports) (Supports
•
ESD Protection)
1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports
•
ESD Protection)
English
4
BIOS Feature
Hardware Monitor
AMI UEFI Legal BIOS with multilingual GUI support
•
ACPI 5.0 Compliant wake up events
•
SMBIOS 2.7 Support
•
CPU, DRAM, PCH 1.05V Voltage multi-adjustment
•
CPU/Chassis temperature sensing
•
CPU/Chassis Fan Tachometer
•
CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by
•
CPU temperature)
CPU/Chassis Fan multi-speed control
•
CASE OPEN detection
•
Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore
•
Microso® Windows® 10 64-bit (For 7th Gen Intel® CPU)
OS
•
Microso® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-
•
bit (For 6th Gen Intel® CPU)
* To install Windows® 7 OS, a modied installation disk with
xHCI drivers packed into the ISO le is required. Please refer to
page 34 or more detailed instructions.
* For the updated Windows® 10 driver, please visit ASRock ’s
website for details: http://ww w.asrock.com
FCC, CE
Certica-
•
tions
* For detailed product information, please visit our website: http://ww w.asrock.com
Please realize that the re is a certain r isk involved with overclo cking, including adjusting the setting in the BIOS, applying Untied Overclocking Technol ogy, or using third-party overclocking tool s. Overclocking may aect your system’s stability, or even cause dam age to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for poss ible damage caused by overclocking.
H110 Pro BTC+
English
5

1.3 Motherboard Layout

ATXP WR 1
Intel
H110
CMO S
Bat tery
LAN
AUDIO CODEC
1
HD_AUDI O1
COM1
1
USB_5_6
1
HDLED RE SET
PLED PWRBTN
PANEL1
1
CLRMOS2
1
PCI E2 _1
RoH S
H110 Pro BT C+
ATX12V1
Top: RJ-45
USB 2. 0 T: USB3 B: USB 4
USB 2.0 T:U SB1 B: USB2
Top:
LINE IN
Center :
FRONT
Bottom :
MIC IN
CPU_FAN1
CHA_FAN1
PCIE_PW R1
Fro nt U SB 3. 0
TPMS1
1
Supe r
I/O
DDR4 _B1 (64 bit , 28 8-p in m odul e)
DDR4 _A1 (64 bit , 28 8-p in m odul e)
PCI E xp res s 3. 0
BIOS ROM
PCI E1
PCI E3 _1
PCI E4 _1
PCI E3
PCI E5 _1
PCI E4
PCI E6 _1
PCI E5
PCI E7 _1
PCI E6
PCI E1 _1
PCI E2
PCIE_PW R2
SATA3_2
SATA3_3
SATA3_0
SATA3_1
CHA_FAN2
1
LPT1
USB3_3_ 4
1
1
SPK_CI1
PS2
Keyb oard
PS2
Mous e
DVI 1
USB 3.0 T:U SB1 B: USB2
M2_1
SATA_POW1
English
6
No. Description
1 ATX 12V Power Connector (ATX12V1)
2 CPU Fan Connector (CPU_FAN1)
3 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
4 ATX Power Connector (ATXPWR1)
5 Chassis Fan Connector (CHA_FAN1)
6 TPM Header (TPMS1)
7 SATA3 Connector (SATA3_1)
8 SATA3 Connector (SATA3_0)
9 SATA3 Connector (SATA3_3)
10 SATA3 Connector (SATA3_2)
11 Chassis Intrusion and Speaker Header (SPK_CI1)
12 Clear CMOS Jumper (CLRMOS2)
13 System Panel Header (PANEL1)
14 USB 2.0 Header (USB_5_6)
15 USB 3.0 Header (USB3_3_4)
16 Print Port Header (LPT1)
17 COM Port Header (COM1)
18 SATA Power Connector (SATA_POW1)
19 PCIe Power Connector (PCIE_PWR2)
20 Front Panel Audio Header (HD_AUDIO1)
21 PCIe Power Connector (PCIE _PWR1)
22 Chassis Fan Connector (CHA _FAN2)
H110 Pro BTC+
English
7

1.4 I/O Panel

1 2
3 4
English
6
No. Description No. Description
1 PS/2 Mouse Port 6 USB 2.0 Port (USB_34)
2 LAN RJ-45 Port* 7 USB 3.0 Ports (USB3_1_2)
3 Line In (Light Blue)** 8 USB 2.0 Port (USB_12)
4 Front Speaker (Lime)** 9 DVI-D Port
5 Microphone (Pink)** 10 PS/2 Keyboard Port
* ere are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK L ED
SPEED LE D
LAN Por t
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection Blinking Data Activity Orange 100Mbps connection On Link Green 1Gbps connection
5810 9 7
8
H110 Pro BTC+
** To congure 7.1 CH HD Audio, it i s required to use an HD front panel audio module and enable the multi­channel audio feature through the audio driver.
Please set Speaker Conguration to “7.1 Speaker”in the Realtek HD Audio Manager.
Function of the Audio Por ts in 7.1-channel Con guration:
Port Function
Light Blue (Rear panel) Rear Speaker Out Lime (Rear panel) Front Speaker Out Pink (Rear panel) Central /Subwoofer Speaker Out Lime (Front panel) Side Speaker Out
English
9

Chapter 2 Installation

is is an ATX form factor motherboard. Before you install the motherboard, study
the conguration of your chassis to ensure that the motherboard ts into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
Make sure to unplug the power cord before installing or removing the motherboard
•
components. Failure to do so may cause physical injuries and damages to motherboard
components.
In order to avoid damage from static electricity to the motherboard’s components,
•
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
Hold components by the edges and do not touch the ICs.
•
Whenever you uninstall any components, place them on a grounded anti-static pad or
•
in the bag that comes with the components.
When placing screws to secure the motherboard to the chassis, please do not over-
•
tighten the screws! Doing so may damage the motherboard.
English
10

2.1 Installing the CPU

1. Before you insert the 1151-Pin CPU into the socket, please che ck if the PnP cap is on the socket, if the CPU surfa ce is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged .
2. Unplug all power cables before installing the CPU.
1
H110 Pro BTC+
A
B
2
English
11
3
4
English
12
5
Please save and replace the cover if the processor i s removed. e cover must be placed if you wish to retur n the motherboard for aer service.
H110 Pro BTC+
13
English

2.2 Installing the CPU Fan and Heatsink

1 2
English
14
FAN
CPU_
2.3 Installing Memory Modules (DIMM)
is motherboard provides two 288-pin DDR4 (Double Data Rate 4) DIMM slots,
and supports Dual Channel Memory Technology.
1. For dual channel conguration, you always need to install identic al (the same
brand, speed , size and chip-type) DDR4 DIMM pairs.
2. It is unable to activate Du al Channel Memory Technology with only one memory module instal led.
3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot; otherwise, this motherboard and DIMM may be damaged.
e DIMM only ts in one correct orientation. It will cause permanent dam age to the mothe rboard and the DIMM if you force the DIMM into the slot at incor rect orientation .
H110 Pro BTC+
15
English
1
2
English
16
3
2.4 Expansion Slots (PCI Express Slots)
ere are 13 PCI Express slots on the motherboard.
Before installing an ex pansion card, please make sure that the power supply is switched o or the power cord is unplugged. Plea se read the documentation of the expan sion card and mak e necessary hardware settings for the card before you start the installation.
PCIe slots:
PCIE2 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.
PCIE1_1/PCIE1/PCIE2_1/PCIE3_1/PCIE3/PCIE4_1/PCIE4/PCIE5_1/PCIE5/
PCIE6_1/PCIE6/PCIE7_1 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width
graphics cards.
1. Please connect the SATA power connector and PCIe power connectors to the power supply when three g raphics cards are installed on this motherboard.
2. 12V power s upply can only prov ide 1.2A current in the white PCIe slots.
H110 Pro BTC+
17
English
Loading...
+ 51 hidden pages