Ariston FA2 834 H IX A AUS Reference Guide

DAILY REFERENCE

GUIDE

EN

THANK YOU FOR PURCHASING AN
ARISTON PRODUCT

To receive more comprehensive help and
support, please register your product at

www. aristonchannel. com

Before using the appliance, carefully read the Health and Safety guide.

PRODUCT DESCRIPTION

1

2

3

4

You can download the Safety Instructions
and the Use and Care Guide by visiting our
website www. aristonchannel. com and
following the instructions on the back of
this booklet.

1. Control panel

2. Fan

3. Lamp

6

7

8

4. Shelf guides

(the level is indicated on the wall
of the cooking compartment)

5. Door

6. Upper heating element / grill

7. Circular heating element

(not visible)

8. Identification plate

(do not remove)

9. Bottom heating element

(not visible)

5

CONTROL PANEL

1234

1. SELECTION KNOB

For switching the oven on by
selecting a function.
Turn to the
the oven off.

position to switch

9

2. TIMER KNOB

Useful as a timer.
Doesn't activate or interrupt
cooking.

3. THERMOSTAT KNOB

Turn to select the temperature
you require when activating the
selected function.

4. LED THERMOSTAT /
PREHEATING

Switches on during the heating
process. Switches off once the
desired temperature is reached.

1

ACCESSORIES

WIRE SHELF BAKING TRAY

The number and type of accessories may vary depending on which model is purchased.
Other accessories can be purchased separately from the After-sales Service.

WWW

www. aristonchannel. com for more information

INSERTING THE WIRE SHELF AND OTHER
ACCESSORIES

. Insert the wire shelf onto the level you require by
holding it tilted slightly upwards and resting the
raised rear side (pointing upwards) down first. Next,
slide it horizontally along the shelf guide as far as
possible.

. The other accessories, such as the baking tray, are
inserted horizontally by sliding them along the shelf
guides.
. The shelf guides can be removed to facilitate the
oven cleaning: pull them to remove from their seats.

Download the Use and Care Guide from

FUNCTIONS

OFF

For switching off the oven.

LIGHT

For switching on the light in the compartment.

CONVENTIONAL

For cooking any kind of dish on one shelf only.

It is best to use the 2nd shelf.

DIAMOND CLEAN

The action of the steam released during this
special low-temperature cleaning cycle allows dirt
and food residues to be removed with ease. Pour 200
ml of drinking water on the bottom of the oven and
use the function for 35’ at 90°C. Activate the function
when the oven is cold and let it cool down for 15'
once the cycle ends.

CONVECTION BAKE

For baking cakes with juicy fillings on a single
shelf. This function can also be used for cooking on
two shelves. Switch the position of the dishes to
cook food more evenly.

GRILL

For grilling steaks, kebabs and sausages,
cooking vegetables au gratin or toasting bread. When
grilling meat, we recommend using a drip tray to
collect the cooking juices: position the pan on any
of the levels below the wire shelf and add 200 ml of
drinking water.

WWW

www. aristonchannel. com for more information

Download the Use and Care Guide from

TURBO GRILL

For roasting large joints of meat (legs, roast
beef, chicken). We recommend using a drip tray to
collect the cooking juices: position the pan on any
of the levels below the wire shelf and add 500 ml of
drinking water.

DEFROSTING

For defrosting food more quickly.

LOWER HEATING

Useful for browning the base of the dish. This
function is recommended also for slow-cooking, for
finishing the cooking of juicy dishes, and making
sauce concentrates.

FORCED AIR

For cooking different foods that require the
same cooking temperature on several shelves
(maximum three) at the same time. This function can
be used to cook different foods without odours
being transferred from one food to another.

BREAD

To bake different types and sizes of bread. It is
best to use the 2nd shelf.

2

USING THE APPLIANCE FOR THE FIRST TIME

EN

.HEAT THE OVEN

A new oven may release odours that have been left
behind during manufacturing: this is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.

Remove any protective cardboard or transparent lm
from the oven and remove any accessories from inside it.

DAILY USE

1. SELECT A FUNCTION

To select a function, turn the selection knob to the
symbol for the function you require.

2. ACTIVATE A FUNCTION

MANUAL

To start the function you have selected, turn the
thermostat knob to set the temperature you require.

To interrupt the function at any time, switch o the
oven, turn the selection knob and the thermostat knob

.

to

DIAMOND CLEAN
To activate the “Diamond Clean” cleaning function,
pour 200 ml of drinking water into the bottom of the
oven, then turn the selection knob and the thermostat
knob to the

It is best to use the function for 35’.

icon.

Heat the oven to 250° C for about one hour,
preferably using the “Convection bake” function. The
oven must be empty during this time.
Follow the instructions for setting the function
correctly.

Notes: It is advisable to air the room after using the
appliance for the first time.

3. PREHEATING

Once the function has been activated, the LED
thermostat will switch on signalling that the
preheating process has begun.
At the end of this process, the LED thermostat
switches off indicating that the oven has reached the
set temperature: At this point, place the food inside
and proceed with cooking.

Please note: Placing the food in the oven before
preheating has finished may have an adverse effect on the
final cooking result.

. SETTING THE TIMER

This option does not interrupt or activate cooking but
allows you to use the display as a timer, both while a
function is active and when the oven is off.

To activate the timer, turn the timer knob to the
desired length of time: an acoustic signal will warn
you when the count-down is finished.

3