ARISTON 4D X (AG) User Manual

0 (0)

Operating Instructions

REFRIGERATOR/FREEZER COMBINATION

	GB		F	E

				Espanol, 21
	English, 1	Français, 11		Espanol, 21

	P		AR

Portuges,31		1

Contents

Installation, 2

Positioning and connection

Description of the appliance, 3-4

Control panel

Overall view

Start-up and use, 5-6

Starting the appliance

Chiller system

Using the refrigerator to its full potential

Using the freezer to its full potential

Maintenance and care, 7

Switching the appliance off Cleaning the appliance

Avoiding mould and unpleasant odours 4D X (AG) Holiday function

Optimization Energy Saving function Replacing the light bulb

Precautions and tips, 8

General safety

Disposal

Respecting and conserving the environment

Troubleshooting, 9

Assistance, 10

Installation

! Before placing your new appliance into operation GB please read these operating instructions carefully.

They contain important information for safe use, for installation and for care of the appliance.

! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidityfree room.

2.Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 12 cm between the sides and any furniture/ side walls.

4.Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

5.In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided.

Levelling

1.Install the appliance on a level and rigid floor.

2.If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

•The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Description of the appliance

Control panel

POWER

Indicator light

REFRIGERATOR

SUPER COOL

SUPER FREEZE

FREEZER

OPERATION

Indicator light

Knob

SUPER COOL

Button

•REFRIGERATOR OPERATION Knob

to regulate the temperature of the refrigerator compartment.

is the optimal temperature for energy saving

levels.

is the holiday function (see Maintenance and care).

OFF switches the refrigerator off.

•SUPER COOL (quick cool) to lower the temperature of the refrigerator compartment rapidly. When it is pressed, the SUPER COOL indicator light illuminates (see Start-up and use).

•SUPER COOL Yellow indicator light (rapid cooling) illuminates when the SUPER COOL button is pressed.

•POWER Indicator light illuminates when the appliance is connected to the electricity network.

SUPER FREEZE

Button

•SUPER FREEZE button (rapid freezing) to freeze fresh food. When it is pressed, the SUPER FREEZE indicator light illuminates (see Start-up and use).

If pressed for at least 9 seconds, this activates the “Optimization Energy Saving” function (see Care and maintenance).

•SUPER FREEZE Yellow indicator light (rapid freezing) illuminates when the SUPER FREEZE button is pressed.

•FREEZER OPERATION Knob

to regulate the temperature of the freezer compartment.

is the optimal temperature for energy saving levels.

switches the appliance off, including the refrigerator.

! The indicator lights are also used to indicate an unusual temperature increase in the freezer compartment (see Troubleshooting).

Description of the appliance

Overall view

The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages.

Control panel

Removable

multipurpose

SHELVES•

CAN RACK

FRUIT and

VEGETABLE bin

BOTTLE shelf

FREEZER and

STORAGE compartment

LAMP

(see Maintenance)

Removable multipurpose

SHELVES•

BOTTLE shelf

Levelling FEET

• Varies by number and/or position.

Start-up and use

Starting the appliance

!Before starting the appliance, follow the installation instructions (see Installation).

!Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate.

!The appliance comes with a motor protection control system which makes the compressor start approximately 8 minutes after being switched on. The compressor also starts each time the power supply is cut off whether voluntarily or involuntarily (blackout).

1.Set the FREEZER OPERATION knob on .

2.Insert the plug into the socket and ensure that the green POWER indicator light illuminates.

3.Turn the FREEZER OPERATION knob to an average value and press the SUPER FREEZE button (rapid freezing): the SUPER FREEZE indicator light will illuminate. Once the refrigerator has reached the optimal temperature, the indicator light goes out and you can begin food storage.

4.Turn the REFRIGERATOR OPERATION knob to an average value. After a few hours you will be able to put food in the refrigerator.

Chiller system

No Frost

The No Frost system circulates cold air continuously to collect humidity and prevent

ice and frost formation. The system maintains

an optimal humidity level in the

compartment, preserving the original

quality of the food, preventing the food from sticking together and making defrosting a thing of the past. Do not block the aeration cells by placing food or containers in direct contact with the refrigerating back panel. Close bottles and wrap food tightly.

Using the refrigerator to its full	GB
potential

•Use the REFRIGERATOR OPERATION knob to adjust the temperature (see Description).

•Press the SUPER COOL button (rapid cooling) to lower the temperature quickly. For example, when you place a large number of new food items inside a fridge the internal temperature will rise slightly. The function quickly cools the groceries by temporarily reducing the temperature until it reaches the ideal level.

•Place only cold or lukewarm foods in the compartment, not hot foods (see Precautions and tips).

•Remember that cooked foods do not last longer than raw foods.

•Do not store liquids in open containers. They will increase humidity in the refrigerator and cause condensation to form.

•SHELVES: with or without grill. Due to the special guides the shelves are removable and the height is adjustable, allowing easy storage of large containers and food.

FRUIT and VEGETABLE bin

The salad crispers fitted inside the fridge have been specially designed for the purpose of keeping fruit and vegetables fresh and crisp. Open the humidity regulator (position B) if you want to store food in a less humid environment, or close it (position A) to store food in a more humid environment.

Using the freezer to its full potential

•Use the FREEZER OPERATION knob to adjust the temperature (see Description).

•Do not re-freeze food that is defrosting or that has already been defrosted. These foods must be cooked and eaten (within 24 hours).

•Fresh food that needs to be frozen must not come into contact with food that has already been defrosted.

•Do not place glass bottles which contain liquids, and which are corked or hermetically sealed in the freezer because they could break.

•The maximum quantity of food that may be frozen daily is indicated on the plate containing the technical properties located on the bottom left side of the refrigerator compartment (for example: Kg/24h: 4).

•To freeze (if the freezer is already operating): press the rapid freezing SUPER FREEZE button

(corresponding yellow indicator light illuminates), insert the food and close the door. The function is disabled automatically after 24 hours or when optimal temperatures have been reached (indicator light goes out);

!to avoid blocking the air circulation inside the freezer compartment, it is advisable not to obstruct the ventilation holes with food or containers.

!Do not open the door during freezing.

!If there is a power cut or malfunction, do not open the freezer door. This will help maintain the temperature inside the freezer, ensuring that foods are conserved for at least 9 -14 hours.

ICE DEVICE

After pouring water in the special ice cups, place them in their places in the ice device. After about 2 hours, the ice cubes will be ready. In order to get the ice cubes, it will be sufficient to turn the two buttons to the right. The ice cubes will fall in to the tray below, ready to be used.

Maintenance and care

Switching the appliance off

During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply:

1.set the FREEZER OPERATION knob on

2.pull the plug out of the socket

! If this procedure is not followed, the alarm may sound. This alarm does not indicate a malfunction. To restore normal operation, it is sufficient to set the FREEZER OPERATION knob on the desired value. To disconnect the appliance, follow point 1 and 2.

Holiday function

To minimise energy usage when on holiday, it is not necessary to switch the appliance off. The appliance has a function which allows it to maintain the temperature of the refrigerator compartment at approximately 15°C (which can also be used to conserve make-up and beauty products). The freezer temperature must be set to the minimum value in order to preserve the food.

To enable the function: set the REFRIGERATOR

OPERATION knob on .

A double acoustic signal informs you when it has been enabled. A single acoustic signal informs you when it has been disabled.

Cleaning the appliance

•The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. Do not use solvents, abrasive products, bleach or ammonia.

•The removable accessories may be soaked in warm water and soap or dishwashing liquid. Rinse and dry them carefully.

•The back of the appliance may collect dust which can be removed by delicately using the hose of a vacuum cleaner set on medium power. The appliance must be switched off and the plug must be pulled out before cleaning the appliance.

•During the cleaning of the slide rails for the drawers in the freezer compartment, it may happen that the automatic drawer closure mechanism is deactivated. To reactivate it, simply close the drawer a little more forcefully than is usually necessary.

Avoiding mould and unpleasant odours

•The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly.

•If you want to switch the appliance off for an extended period of time, clean the inside and leave the doors open.

Optimization Energy Saving function

If you are going on holiday but would like the operating temperature performance of the product to remain unchanged, you can use the Optimization Energy Saving function. This function maximises the energy saved. It is activated by setting the knobs to “I CARE”, then pressing and holding the Super Freeze button for at least 9 seconds; the Super Freeze indicator light will begin to flash, signalling the activation of this function.

The Optimization Energy Saving function may also be deactivated by pressing the Super Freeze button again. The corresponding indicator light will stop flashing, thereby signalling that the original operating conditions have been restored.

In humid environments, when the Optimization Energy Saving function is activated, slight condensation may form on the door of the appliance; normal operating conditions are restored when the function is deactivated.

Replacing the light bulb

To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical

	socket. Follow the
	instructions below.
	Access the light bulb by
	removing the cover as
	indicated in the
2	diagram.
2	Replace it with a similar
1	light bulb within the
1	power range indicated
	on the cover (10 W, 15
	W or 25 W).

Precautions and tips

! The appliance was designed and manufactured in GB compliance with international safety standards. The

following warnings are provided for safety reasons and must be read carefully.

This appliance complies with the following

Community Directives:

-73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments;

-89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments;

-2002/96/CE..

General safety

•The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use.

•The appliance must be used to store and freeze food products by adults only and according to the instructions in this manual.

•The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain and storms.

•Do not touch the appliance with bare feet or with wet or moist hands and feet.

•Do not touch the internal cooling elements: this could cause skin abrasions or frost/freezer burns.

•When unplugging the appliance always pull the plug from the mains socket, do not pull on the cable.

•Before cleaning and maintenance, always switch off the appliance and disconnect it from the electrical supply. It is not sufficient to set the temperature adjustment knobs on OFF (appliance off) to eliminate all electrical contact.

•In the case of a malfunction, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance.

•Do not use utensils other than the scraper provided, or electrical equipment which is not of the type specified by the manufacturer, inside the frozen food storage compartments.

•Do not put ice cubes taken directly from the freezer into your mouth.

•Do not allow children to tamper with the controls or play with the appliance. Under no circumstance should they be allowed to sit on the bins or to hang from the door.

•Keep packaging material out of the reach of children! It can become a choking or suffocation hazard.

•When closing the refrigerator doors, pay attention to the position of the upright (see figure).

•Make sure that excessive volumes

of food are not placed in the upper part of the freezer compartment, in the space reserved for the ice tray (where present).

Disposal

•Observe local environmental standards when disposing packaging material for recycling purposes.

•The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

Respecting and conserving the environment

•Install the appliance in a fresh and well-ventilated room. Ensure that it is protected from direct sunlight and do not place it near heat sources.

•Try to avoid keeping the door open for long periods or opening the door too frequently in order to conserve energy.

•Do not fill the appliance with too much food:

cold air must circulate freely for food to be preserved properly. If circulation is impeded, the compressor will work continuously.

•Do not place hot food directly into the refrigerator. The internal temperature will increase and force the compressor to work harder and will consume more energy.

•Defrost the appliance if ice forms (see Maintenance). A thick layer of ice makes cold transference to food products more difficult and results in increased energy consumption.

•Regularly check the door seals and wipe clean to ensure they are free of debris and to prevent cold air from escaping (see Maintenance).

•Thanks to its independent freezer door and drawer opening system, this product offers a 50% energy saving in comparison with a normal 2-door combined refrigerator/freezer unit.

Troubleshooting

Malfunctions:

The green POWER indicator light does not illuminate.

The motor does not start.

The indicator lights are on but the light is dim.

a)The alarm sounds.

b)The alarm sounds and the two yellow indicator lights flash.

c)The alarm sounds and the two yellow indicator lights as well as the green one flash.

Heating

is excessive

+ buzzer

Heating danger

+ buzzer

The green POWER indicator light flashes.

Possible causes / Solutions:

•The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house.

•The appliance comes with a motor protection control (see Start-up and use).

•Pull out and reverse the plug before putting it back in the socket.

a)The refrigerator door has remained open for more than two minutes (the buzzer will stop sounding when you shut the door) or the correct switchingoff procedure was not followed (see Maintenance).

b)The temperature in the freezer is too high. Check the quality of the food products and dispose if necessary.

c)The temperature in the freezer has reached a dangerous level. The food must be disposed immediately.

b/c) In both these cases the freezer will maintain a temperature of about 0°C so that the food does not re-freeze.

To turn off the acoustic signal open and close the refrigerator door. To restore normal operation bring the FREEZER OPERATION knob setting

to(off) and turn the appliance on again.

•The appliance is not operating correctly. Contact the Technical Assistance Centre.

The refrigerator and the freezer do not cool well.

•The doors do not close properly or the seals are damaged.

•The doors are opened too frequently.

•The OPERATION knobs are not on the correct setting (see Description).

•The refrigerator or the freezer have been over-filled.

The food inside the refrigerator is beginning to freeze.

•The REFRIGERATOR OPERATION knob is not on the correct setting (see Description).

•The food is in contact with the back inside wall of the refrigerator.

The motor runs continuously.	•	The SUPER FREEZE button has been pressed (rapid freezing): the yellow
		SUPER FREEZE light is on or flashing (see Description).
	• The door is not closed properly or is continuously opened.
	• The outside ambient temperature is very high.
	•	The thickness of the frost exceeds 2-3 mm (see Maintenance).

The appliance makes a lot of noise.

•The appliance has not been installed on a level surface (see Installation).

•The appliance has been installed between cabinets that vibrate and make noise.

•The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.

The back wall of the refrigerator unit is • This shows the appliance is operating normally. covered in frost or droplets of water

Assistance

195071993.00

06/2008


	Before calling for Assistance:
GB	Before calling for Assistance:
GB	•	Check if the malfunction can be solved on your own (see Troubleshooting).
	•
	•	If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service
	•
		Centre

Communicating:

•type of malfunction

•appliance model (Mod.)

•serial number (S/N)

This information can be found on the data plate located on the bottom left side of the refrigerator compartment.

model

serial number

Mod. RG 2330

Cod. 93139180000

S/N 704211801

220 - 240 V-

50 Hz

150 W

Fuse

Max 15 w

Class

Total

340

Freez.

Capac

Gross

Net

Gross

Poder de Cong

Clase N

Bruto

Util

Bruto

kg/24 h 4,0

Classe

Brut

Utile

Brut

Compr.

R 134 a

Test

Pressure

Syst.

HIGH-235

Kompr.

kg 0,090

P.S-I. LOW 140

Made in Italy 13918

Never call on unauthorized technicians and always refuse spare parts which are not originals.

Mode d’emploi

COMBINE REFRIGERATEUR/CONGELATEUR

	GB		F	E

				Espanol, 21
	English, 1	Français, 11		Espanol, 21

	P		AR

Portuges,31		1

Sommaire

Installation, 12

Mise en place et raccordement

Description de l’appareil, 13-14

Tableau de bord

Vue d’ensemble

Mise en marche et utilisation, 15-16

Mise en service de l’appareil Système de refroidissement

Pour profiter à plein de votre réfrigérateur Pour profiter à plein de votre congélateur

Entretien et soins, 17

Mise hors tension

Nettoyage de l’appareil

Contre la formation de moisissures et de mauvaises

4D X (AG) odeurs

Fonction holiday

Fonction Optimization Energy Saving Remplacement de l’ampoule d’éclairage

Précautions et conseils, 18

Sécurité générale

Mise au rebut

Economies et respect de l’environnement

Anomalies et remèdes, 19

Assistance, 20

Installation

! Conservez ce mode d’emploi pour pouvoir le

F consulter à tout moment. En cas de vente, de cession ou de déménagement, veillez à ce qu’il suive l’appareil pour informer le nouveau propriétaire sur son fonctionnement et lui fournir les conseils correspondants.

! Lisez attentivement les instructions : elles contiennent des conseils importants sur l’installation, l’utilisation et la sécurité de votre appareil.

Mise en place et raccordement

Mise en place

1.Placez l’appareil dans une pièce bien aérée et non humide.

2.Ne bouchez pas les grilles d’aération arrière : le compresseur et le condensateur produisent de la chaleur et exigent une bonne aération pour bien fonctionner et réduire la consommation d’électricité.

3.Prévoir au moins 10 cm entre le haut de l’appareil et les meubles installés au-dessus et au moins 12 cm entre les côtés et les meubles/parois latérales.

4.Installez l’appareil loin de sources de chaleur (rayons directs du soleil, cuisinière électrique).

5.Pour maintenir une distance optimale entre le produit et la paroi arrière, montez les cales d’espacement comprises dans le kit d’installation et suivez les instructions de la notice spécialement prévue.

Mise à niveau

1.Installez l’appareil sur un sol plat et rigide.

2.Si le sol n’est pas parfaitement horizontal, vissez ou dévissez les petits pieds avant pour bien niveler l’appareil.

Raccordement électrique

Après le transport, placez l’appareil à la verticale et attendez au moins 3 heures avant de le raccorder à l’installation électrique. Avant de brancher la fiche dans la prise de courant, assurez-vous que :

•la prise est bien munie d’une terre conforme à la loi;

•la prise est bien apte à supporter la puissance maximale de l’appareil, indiquée sur la plaquette signalétique placée à l’intérieur du compartiment réfrigérateur en bas à gauche (ex. 150 W);

•la tension d’alimentation est bien comprise entre les valeurs indiquées sur la plaquette signalétique, placée en bas à gauche (ex.220-240 V);

•la prise est bien compatible avec la fiche de l’appareil.

En cas d’incompatibilité, faites remplacer la fiche par un technicien agréé (voir Assistance); n’utilisez ni rallonges ni prises multiples.

!Après installation de l’appareil, le câble électrique et la prise de courant doivent être facilement accessibles.

!Le câble ne doit être ni plié ni excessivement écrasé.

!Il doit être contrôlé prériodiquement et ne peut être remplacé que par un technicien agréé (voir Assistance).

!Nous déclinons toute responsabilité en cas de non respect des normes énumérées ci-dessus.

Description de l’appareil

Tableau de bord

Voyant

ALIMENTATION

Bouton

Voyant

Bouton

FONCTIONNEMENT

SUPER COOL

SUPER FREEZE

REFRIGERATEUR

CONGELATEUR

Touche SUPER	Touche
COOL	SUPER FREEZE

•Bouton FONCTIONNEMENT REFRIGERATEUR pour régler la température à l’intérieur du compartiment réfrigérateur.

est la température optimale avec une faible consommation d’électricité.

est la fonction holiday (voir Entretien et soins). OFF éteint le réfrigérateur.

•Touche SUPER COOL (refroidissement rapide) pour abaisser rapidement la température du compartiment réfrigérateur. Si elle est enfoncée, le voyant SUPER COOL s’allume(voir Mise en marche et utilisation).

•Voyant jaune SUPER COOL (refroidissement rapide): il s’allume dès que vous appuyez sur la touche SUPER COOL.

•Voyant VERT ALIMENTATION il s’allume quand l’appareil est branché au réseau d’alimentation.

•Touche SUPER FREEZE (congélation rapide) pour congeler des aliments frais. Si elle est enfoncée, le voyant SUPER FREEZE s’allume (voir Mise en marche et utilisation).

Une pression d’au moins 9 secondes sur cette touche active la fonction “Optimization Energy Saving” (voir Entretien et soin).

•Voyant jaune SUPER FREEZE (congélation rapide): il s’allume dès que vous appuyez sur la touche

SUPER FREEZE .

•Bouton FONCTIONNEMENT CONGELATEUR pour régler la température à l’intérieur du compartiment congélateur.

est la température optimale avec une faible consommation d’électricité.

! Les voyants servent aussi à signaler toute augmentation anormale de la température à l’intérieur du compartiment congélateur (voir Anomalies et remèdes).

Description de l’appareil

FVue d’ensemble

Ces instructions d’utilisation s’appliquent à plusieurs modèles, il se peut donc que les composants illustrés présentent des différences par rapport à ceux de l’appareil que vous avez acheté. Vous trouverez dans les pages suivantes la description des objets plus complexes.

Tableau de bord

Balconnet amovible

PORTE-OBJETS•

Balconnet PORTE-

CANETTES

Bac FRUITS e

LEGUMES

Balconnet

BOUTEILLES

Compartiment

CONGELATION et

CONSERVATION

Eclairage

(voir Entretien)

Balconnet amovible

PORTE-OBJETS•

Balconnet

BOUTEILLES

PIED de réglage

•Leur nombre et/ou leur emplacement peut varier.

Mise en marche et utilisation

Mise en service de l’appareil

!Avant de mettre l’appareil en service, suivez bien les instructions sur l’installation (voir Installation).

!Avant de brancher votre appareil, nettoyez bien les compartiments et les accessoires à l’eau tiède additionnée de bicarbonate.

!Cet appareil est équipé d’un système protège-moteur qui ne fait démarrer le compresseur que 8 minutes après son branchement. C’est ce qui se passera aussi après toute coupure de courant, volontaire ou involontaire (panne d’électricité.

1. Amenez le bouton FONCTIONNEMENT

CONGELATEUR sur .

2.Branchez la fiche dans la prise et contrôlez que le voyant vert ALIMENTATION ELECTRIQUE s’allume.

3.Amenez le bouton FONCTIONNEMENT CONGELATEUR sur une valeur intermédiaire et appuyez sur la touche SUPER FREEZE (congélation rapide) : le voyant jaune SUPER FREEZE s’allumera. Il ne s’éteindra que quand le congélateur aura atteint sa température optimale : vous pourrez alors introduire les aliments.

4.Amenez le bouton FONCTIONNEMENT REFRIGERATEUR sur une valeur intermédiaire. Au bout de quelques heures, vous pourrez commencer à stocker des aliments dans le réfrigérateur.

Système de refroidissement

No Frost

Le No Frost gère un flux continu d’air froid qui absorbe l’humidité et empêche la formation de

glace et de givre : il maintient un niveau

d’humidité adéquat à l’intérieur du compartiment réfrigérateur et, grâce à

l’absence de givre, il préserve les qualités originaires des aliments; dans le compartiment congélateur il évite la formation de glace, il n’y a par conséquent plus besoin de dégivrer et les aliments ne collent plus entre eux. Ne placez pas d’aliments ou de récipients contre la paroi refroidissante arrière pour ne pas boucher les trous d’aération et éviter une formation rapide d’eau condensée. Fermez bien les bouteilles et emballez les aliments.

Pour profiter à plein de votre
réfrigérateur	F

•Pour régler la température, utilisez le bouton FONCTIONNEMENT REFRIGERATEUR (voir Description).

•Appuyez sur la touche SUPER COOL (refroidissement rapide) pour faire baisser la température rapidement, par exemple quand vous remplissez le compartiment après avoir fait de grosses provisions. Cette fonction se désactive automatiquement une fois le temps écoulé.

•N’introduisez que des aliments froids ou à peine tièdes, jamais chauds (voir Précautions et conseils).

•Les aliments cuits contrairement à ce que l’on croit ne se conservent pas plus longuement que les aliments crus.

•N’introduisez pas de récipients non fermés contenant des liquides: ces derniers entraîneraient une augmentation de l’humidité et la formation d’eau condensée.

•CLAYETTES: pleines ou grillagées. Elles sont amovibles et réglables en hauteur grâce à des glissières spéciales, pour le rangement de récipients ou d’aliments de grande dimension.

Bac FRUITS et LEGUMES

Les tiroirs à fruits et légumes qui équipent le réfrigérateur sont spécialement conçus pour garder vos fruits et légumes frais et savoureux. Ouvrez le régulateur d’humidité (position B) si vous désirez conserver vos aliments dans un environnement moins humide ou bien fermez-le (position A) pour les conserver dans un environnement plus humide.

Pour profiter à plein de votre congélateur

•Pour régler la température, utilisez le bouton FONCTIONNEMENT CONGELATEUR (voir Description).

•Ne recongelez pas des aliments décongelés ou en cours de décongélation; il faut les faire cuire et les consommer (dans les 24 heures).

•Les aliments frais à congeler ne doivent pas être placés au contact d’aliments déjà congelés.

•Ne stockez pas dans votre congélateur des bouteilles en verre contenant des liquides, bouchées ou fermées hermétiquement, elles pourraient se briser.

•La quantité journalière maximale d’aliments pouvant être congelée est indiquée sur l’étiquette des caractéristiques, placée dans le compartiment réfrigérateur en bas à gauche (exemple : 4 Kg/24h).

•Pour congeler (si le congélateur est déjà en service):

appuyez sur la touche SUPER FREEZE (congélation rapide) (allumage du voyant jaune correspondant), introduisez les aliments et fermez la porte. Cette fonction se désactive automatiquement au bout de 24 heures ou dès que les températures optimales sont atteintes (voyant éteint);

!Pour éviter d’empêcher la circulation de l’air à l’intérieur du congelateur, nous recommandons de ne pas boucher avec des aliments ou des récipients les trous d’aération

!Evitez d’ouvrir la porte pendant la phase de congélation.

!En cas de coupure de courant ou de panne, n’ouvrez pas la porte du congélateur : les produits surgelés et congelés se conserveront ainsi sans problème pendant 9 - 14 heures environ.

ICEDEVICE

Sortez les récipients spéciaux de glace, mettez-y de l’eau et placez-les dans leur location dans Icedevice. Approximativement 2 heures après, les cubes de glace seront prêts. Pour prends les glaçons, il suffira de tourner à droite les deux boutons; les glaçons tomberont de façon prête dans le récipient d’endessous (voir figure).

+ 36 hidden pages