AOC L15X421, L20S421, L20W421 User Manual

User's Manual

LCD TV

L15X421

Q41T2001673 3A

L20S421 L20W421

USER’S MANUAL

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS ------------------------------------- 2

PREPARATION ----------------------------------------------------------------------

MOUNTING THE TV BASE································································ 5

OPERATING INSTRUCTIONS --------------------------------------------------

Use of the remote control ---------------------------------------------------

To use the menus -------------------------------------------------------------

Main menu ----------------------------------------------------------------------

CONNECT PERIPHERAL EQUIPMENT --------------------------------------

Front Panel Control Knobs --------------------------------------------------

Preparation ---------------------------------------------------------------------

Video recorder -----------------------------------------------------------------

DVD player ----------------------------------------------------------------------

Camera, camcorder, Video Game set -----------------------------------19 Headphone ---------------------------------------------------------------------

Tips -------------------------------------------------------------------------------

PRODUCT SPECIFICATION ----------------------------------------------------

BEFORE CALLING SERVICE ---------------------------------------------------

Glossary -------------------------------------------------------------------------

Thank you very much for choosing the LCD TV. We recommend that you take a few minutes to read carefully through this

manual before installing and switching on the TV. Please keep this manual in a safe place for your future reference.

SAFETY: Lamp Disposal

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG.

SYMBOL SYMBOL DEFINITION

DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle,is intended to alert the user to the presence of insinuated “dangerous

SA 1965

SA 1966

voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.

INSTRUCTIONS: The exclamation point within an equilateral triangle is to alert the User to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appliance.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, Such as vases, Shall be placed on the apparatus. Caution - Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with

the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug.

A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and third grounding prong. The wide blade or third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. The TV should be operated only from the type of power source indicated

on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

14. Unplug this apparatus during lightning storms or when unused for long

periods of time.

15. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

16. This product may contain lead or mercury. Disposal of these materials

may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org

17. Damage Requiring Service – The appliance should be serviced by

qualified service personnel when:

A. The power supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance; or C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a

marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

18. Tilt/Stability – All televisions must comply with recommended

international global safety standards for tilt and stability properties of its cabinets design.  Do not compromise these design standards by applying excessive

pull force to the front, or top, of the cabinet, which could ultimately overturn the product.

 Also, do not endanger yourself, or children, by placing electronic

equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product

19. Wall or Ceiling Mounting – The appliance should be mounted to a wall

20. Power Lines – An outdoor antenna should be located away from power

21. Outdoor Antenna Grounding – If an outside antenna is connected to

damage and/or personal injury.

or ceiling only as recommended by the manufacturer.

lines.

the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Cord, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mats and supporting structure grounding of the lead-in wire to an antennadischarge unit, size of grounding connectors, location of antennadischarge unit, connection to grounding electrodes and requirements for the grounding electrode. See Figure below.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Note to the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the adapter!

22. Objects and Liquid Entry – Care should be taken so that objects do

not fall and liquids are not spilled into the enclosure through openings.

PREPARATION

1. Place the TV on a solid surface.

Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing.

2. Insert the aerial plug firmly into the aerial socket at the back of the TV.

Note: L20S421 has the handle at the back of the TV.

MOUNTING THE TV BASE

The TV base will be separated with the TV unit. You should Install the base before you use the TV unit.

 Place the TV on its face on a soft blanket.  Install the base stand with three screws.  Place the TV on the table.

Note: L15X421 does not need the screws to install.

3. Remote control:

Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V).

4. Power:

Insert the power cord in the wall socket having an AC power supply.

5. Turn the TV on: Turn the main power switch on the right side of TV to ON.

Press the secondary power button in front of the TV to turn it on. When the TV is ON, the LED may be green or Red When LED is green, the TV is working; when LED is Red, the TV is in idle mode for energy saving or Power Off. When pull out AC Power Cable or AC Power Switch Off, LED is Off.

OPERATING INSTRUCTIONS

USE OF THE REMOTE CONTROL

Not Supported.

POWER

Press to turn on/off the

TV. The TV is never

completely powered off

unless it is physically

unplugged.

0~9/100 Digit buttons

To select a TV channel.

Press

or ( or ) to browse through the TV channels,which are not erased. Toview a blocked channel, use the digital buttons to access，the channel and enter your access code.

VOL

Press + or – to adjust the

volume.

Press this button to turn PC mode

SLEEP

With this key you can set a time period after which the TV should switch itself to standby. Press the key repeatedly to select the number of minutes. The counter runs from 5,10,15,20,25…120 minutes.

PIP

Not Supported.

POP

Press repeatedly to display OSD menu.

V-CHIP

Press this button to setup parental control.

SWAP

Not Supported.

SIZE

Press this button to turn Auto,Normal, Expand, Compress, Amaronap.

MUTE

Temporarily interrupt the sound or restore it.

DISPLAY

Press this button to Display Channel number on the right-top corner.

MTS /SAP

Press this key to activate

Multichannel Television Sound, Stereo or Mono sound.

PRE-CH

To display the previously selected TV channel.

TV/VIDEO

Select your input source: press repeatedly to select

TV, AV, S-VIDEO, PC.

CAPTION

Press this button to turn Closed Caption on. Be sure you have selected Caption On in the Setup menu.

Up & Down

Press Up and Down we Can select the submenu

Left & Right

Press Left and Right ,we can Change the Setting of submenu

+ 22 hidden pages