Anvil 120 User Manual
U-BOLTS & STRAPS
C
Fig. 120 Light Weight U-Bolt
Size Range: 1⁄2" through 10"
Material: Carbon steel
Finish: q Plain or q Zinc Plated (Hot-Dip Galvanized optional)
Service: Recommended for support, or guide of relatively light loads. Normally used
with two hex nuts.
Maximum Temperature: 650° F.
Ordering: Specify pipe size x rod size, figure number and name. Hex nuts must be
ordered separately.
Note: The acceptability of galvanized coatings at temperatures above 450°F is at the
discretion of the end user.
FIG. 120: DIMENSIONS (IN) • LOADS (LBS) • WEIGHTS (LBS)
Pipe
Size
1
⁄2
3
⁄4 0.07 11⁄8 13⁄8 21⁄16
1 0.07 13⁄8 15⁄8 23⁄16
11⁄4 0.08 111⁄16 115⁄16 23⁄8
11⁄2 0.09 2 21⁄4 27⁄16
2 0.10 27⁄16 211⁄16 211⁄16
21⁄2
3 0.31 39⁄16 315⁄16 33⁄8
31⁄2 0.35 41⁄16 47⁄16 35⁄8
4 0.38 49⁄16 415⁄16 37⁄8
5 0.45 55⁄8 6 49⁄16
8 1.20 83⁄4 91⁄4 61⁄16
10 4,320 2.30
Max
Load
580
1,460
2,700
Weight
0.06
0.28
0.95
Rod Size
A
1
⁄4
3
⁄8
1
⁄2
5
⁄8 107⁄8 111⁄2 71⁄4 21⁄2
B C D E
15
⁄16 13⁄16 115⁄16
215⁄16 35⁄16 31⁄16
63⁄4 71⁄4 51⁄16
13⁄4
21⁄46
B
C
L
2
A
E
D
PROJECT INFORMATION APPROVAL STAMP
Project:
Address:
Contractor:
Engineer: Remarks:
Submittal Date:
Notes 1:
Notes 2:
PH-1.15
Approved
q
Approved as noted
q
Not approved
q
Loading...