Antari Z-380 Fazer User Manual

Z-380 Fazer

Machine User Manual

English

User Manual

Safety Information

Please read the following safety information carefully before operatin g the machine. Information includes important safety information about installation, usage, and maintenance. Pay attention to all warning labels and instructions in this manual and printed on the machine.

If you have questions about how to operate the machine safely, please contact your local Antari dealer for help.

․ Keep this device dry. ․ Always connect to a grounded circuit to avoid risk of electrocution. ․ Before connecting machine to power, always check voltage indicate on machine match

to your local AC voltage. Do not use the machine if AC power voltage does not match.

․ Disconnect the machine from AC power before servicing and when not in use. ․ This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled,

disconnect AC power and clean with a damp c l oth. If fluid is spill ed o nt o el ectr oni c parts, immediately unplug the machine and contact your local Antari dealer for advice.

․ No user serviceable and modifiable parts inside. Never try to repair this product,

unauthorized technician may lead machine to damage or malfunction.

․ For adult use only. Never leave the machine running unattended. ․ Installed in well ventilated area. Provide at least 50 cm space around the machine. ․ Never add flammable liquid of any kind to the machine. ․ Make sure there are no flammable materials close to the machine while operating. ․ Only use Antari fluid. Other fluid may lead to heater clog and malfunction. ․ If the machine fails to work, unplug the machine and stop operation immediately.

Contact your local Antari dealer for advise.

․ Before transporting the machine, make sure the fluid tank is completely drained. ․ Smoke fluid may present health risks if swallowed. Do not drink smoke fluid. Store it

3

securely. In case of eye contact or if fluid is swallowed immediately look for medical advice.

Unpacking and Inspection

Immediately upon receiving the machine, carefully unpack the carton, check all content to ensure that all parts are present and have been received in good condition. If any parts appear damaged or m ishandl ed from ship ping, no tify the s hipper immedi ately and r etrai n the packing material for inspection.

What is included: 1 x Z-380 Fazer 1 x Power Cord

1 x User Manual

Product Dimension

247.7 mm

Product Overview

328

328 mm

264.9 mm

4

XLR 3-Pin DMX Connector

LCD display Control Panel

Power Inlet Fan Speed Adjustment Knob

Wire Remote Socket

Main Power Switch XLR 5-Pin DMX Connector

Output Level Adjustment Knob

Setting Up

Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm open space around the machine.

Step 2: Fill the fluid tank with Antari approved fluid.

Step 3: Connect the machine to suitable rated power supply. To det er m i ne the power

requirement for the machine refer to the label on the back of the machine.

Always connect the machine to a protected circuit and ensure it is properly grounded to avoid risk of electrocution.

Step 4: Turn on the machine and allow it t o heat u p. He at up takes appr oximatly 1.5 mintues. Once the machine has reached operating temperature, the LCD display will show “Ready to Faze”. Now the machine is ready for operation.

Step 5: To start making haze, locate the Volume button on the control panel, and press the button to start making faze.

Step 6: To turn off the mac hi ne, press Stop button and put the power switch to the OFF position.

5

Rotary Knob

Function

Operation

Control Panel Operation

The machine can be operated with onboard digital control interface or two rotary knobs located on the rear.

SMOKE Turn haze on/off, adjust output volume from 0~100% FAN Adjust fan speed from 20%~100%

Button Function

[MENU] Scroll through setting menu

▲ [UP]/[TIMER] ▼ [DOWN]/[VOLUME]

[STOP] Deactivate Timer/Volume function

Control Menu

Interval

Set interval from 1 to 180 seconds

Set 180s

Duration

Set duration from 1 to 120 seconds

Set 120s

Up/Activate Timer function Down/Activate Volume function

Timer

Set timer output from 1 to 100%

Out 100%

6

Volume Out 100%

Fan Out 100%

DMX512 Add. 511

DMX Mode

1Ch

Wireless

OFF

Set volume output from 1 to 100%

Set fan output from 20 to 100%

Set DMX address from 1 to 511

Set DMX mode Sync, 1Ch or 2Ch

Turn On or Off wireless control

Quick

Turn On or Off run last setting function

StartOFF

Remote Control Operation (Optional)

To operate the machine by remote control, connect the remote to the microphone jack located on the rear of machine. Use the switc h to turn haz e on/off , and use the rotar y knob to adjust the output volume from 0~100%.

7

Wireless Operation (Optional)

Wireless remote control system W-2 consists of a transmitter equipped with four buttons to turn faze output on or off, and adjust output volume; with an onboard receiver attach to the rear panel of Z-380.

W-2 Wireless Transmitter

Wireless remote control function: [A] button – Turn on faze output [B] button – Turn off faze outpu t [C] button – Increase output volume

Wireless Receiver

[D] button – decrease outp ut vol um e

In a free open space the effective distance is 50 meters, actual usage depending on obstacle level the effective distance is 10-25 meters.

8

Registering transmitter

Transmitter can be pair or deleted from the receiver. Each receiver can pair up to 10 transmitters. Follow below steps to pair or delete transmitter from receiver.

Step 1: Power off Z-380 Fazer Step 2: Press and hold [DOWN] butt on Step 3: Turn power on and hol d [DOWN] button until below menu shows on display

UP: Pair DOWN:Del

Step 4A: Press [UP] to pair a new transmitter; press any button on the W-2 remote to finish pairing. Step 4B: Press [DOWN] button to delete existing transmitter.

Transmitter battery replacement

If effective distance seems to be decreased, it is possible the battery level are low and require replacement. In order to replace the battery, undo the three screws on the back of transmitter to rele ase the cov er. Repl ace with same type and speci ficati on of batt ery which is 27A 12V

DMX Connector Pin Assignment

The machine provid e 3 or 5 pi n X LR connector for DMX connect ion. Diagram below i ndic a te pin assignment information

9

Pin Function

1 Ground 2 Data3 Data+

DMX Operation

Making the DMX Connection – Connect machine to a DMX controller or to one of the machines in the DMX chain. The machine uses an 3 or 5 pin XLR connector for DMX connection, the connector is located on the rear of the machine.

DMX Channel Function

Channel Mode Channel Value Function

1 0-5 Faze off

2

2 6-255 Faze 1-100%

Faze off

0-5

Fan 100%

1 1

Faze 1-100%

6-255

Fan 100% Faze Off

0-5

Fan 20%

Sync 1

Faze 1-100%

6-255

Fan 21-100%

Fluid

Only use Antari FLG water-based liquid for the Z-380 Fazer. The machine is tested and

10

calibrated with this liquid to get the best output performance. Warranty will be void if any other type of liquid is used, improper use of liquid may lead to machine failure and malfunction.

Service and Maintenance

․ Do not allow the machine to become contaminated. ․ Remove dust from air vents with air compressor, vacuum or a soft brush. ․ Only use a damp cloth to clean the casing. ․ Before storing r un dis til led w ater thro ugh th e s ystem to hel p avoi d c onde nsing the pum p

or heater.

․ It is recommended to run the machine on a monthly basis in order to achieve best

performance and output condition.

․ Excessive dust, l iquid and dir t built up wi ll d egr ade per for mance an d ca use overh eatin g.

Fuse Replacement

Disconnect AC power before replacing fuse. Only replace fuse with same type and rating.

Step 1: Disconnect power cord from supply. Step 2: Use a flat-head screwdriver to release fuse holder. Step 3: Replace fuse with exact same type and rating as indi ca t ed bel ow. Step 4: Reinsert fuse holder.

11

Fuse

100V = 待研發確認

120V = T15A 250V

240V = T7A 250V

Error Messages

Heater Overheat

Indicate heater exceed temperature range

Heater Error

Indicate heater not working properly

If above message show on display unplug the machine and stop operation immediately. Contact your local Antari dealer for advise

Technical Specifications

Input voltage AC120V, 50/60Hz

AC240V, 50/60Hz

Fuse 100V = T12A 250V

120V = T15A 250V

240V = T7A 250V Heater 1500W Warm-up time 1.5 min. (approx.) Coverage volume 6000 cu.ft./min. Max. operating time 3.5 hrs max. output Fluid tank capacity 1.2 L Fluid consumption 6 ml/min. Compatible fluid Antari FLG water-based fluid Control option DMX 512, Cable remote, Manual, Wireless remote

Adjustable faze volume and fan speed

12

DMX channels 2 channels, Faze volume and fan speed Power connection IEC DMX data connection 3 and 5 pin XLR Remote control connection 3.5mm headphone jack Dimension L 328 x W 247.7 x H 264.9 mm

L 328 x W 247.7 x H 323.9 mm (with hanging bracket) Dry weight 8.48 kg Accessories (Optional) Z-3 remote control, W-2 wireless remote

13

＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿

14

＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿

15

C08Z38000

Antari Z-380 Fazer User Manual [ru]

Specifications and Main Features

Frequently Asked Questions

User Manual