Thank you for choosing Antari’s M-1 Mobile Fogger. You now own a sturdy and portable
state-of-the-art fog machine. Prior to use, we suggest that you carefully read all of the instructions.
By following the suggestions found in this user manual, you can look forward to exceptional
performance from your Antari Mobile Fog Machine for years to come.
Please follow these operation, safety and maintenance instructions to ensure a long
and safe life for your fog machine.
Specifications
․ Fog Output: 300 cubic feet / per minute
․ Power Consumption: 65W
․ Fluid Tank Capacity: 110 c.c.
․ Battery: DC12V / 2.3Ah
․ Fluid Consumption: 2 c.c. / per minute
․ Liquid Used: Antari FLM-05 Fog Liquid
․ Optional Remote: MCT-1 (Timer Remote)、MCR-1 (Wireless Remote)
․ Weight: 1.8kg (M-1 and battery) 5.5kg
(M-1 with battery, charger, flight case, and 500c.c. liquid)
․ Dimensions (mm): L 227 W 66 H 81
․ Continuous Fog Output: 10~12 minutes (Using battery)
Unlimited (Using dummy battery and power adaptor, as long as sufficient liquids are provided)
CAUTION!
Pay attention to all warning labels and instructions printed on the exterior of your
Antari M-1 Fog Machine
Danger of Electric Shock
․ Keep this device dry.
․ Always remove the battery or unplug the power adaptor to your Antari M-1 Fog Machine
before filling the liquid tank.
․ Always keep the fog machine in upright position.
․ Remove the battery or unplug the power adaptor when not in use.
3
․This machine is not waterproof or splash proof. If moisture, water, or fog liquid gets inside the
housing, immediately remove power and contact a service technician or your Antari dealer
before using it again.
․No user serviceable parts inside. Refer to your Antari dealer or other qualified service
personnel.
Danger of Burns
․For adult use only. Fog machine must be installed out of the reach of children. Never leave the
unit running unattended.
․ Keep nozzle at least 50 cm (20 in.) away from contact with anything while in operation.
․ The fog vapor at point of release is under pressure and is extremely hot.
․ Never aim the output nozzle directly at people.
․ Fog machine output is hot. Avoid coming within 50 cm of the output nozzle during operation.
․ Place the fog machine in a well-ventilated area. Never cover the vents on the front of the M-1.
Never aim the output nozzle at open flames.
․The output nozzle becomes hot during operation. Keep flammable materials at least 50 cm
away from the nozzle.
․Always allow your Antari Fog Machine to cool down before attempting to clean or service it.
Danger of Explosion
․Do not expose the battery to excessive heat, keep away from open flames and do not attempt
to remove the case.
․ Never add flammable liquids of any kind (such as oil, gas, perfume) to the fog liquid.
․ Use only high-quality, water/glycol based fog liquid that your Antari dealer recommends (for
M-1 only FLM-05). Other fog liquids may generate a poor fog effect, clog the internal
components or “spit” fog liquid.
․Always make sure there is sufficient liquid in the fog liquid tank. The fluid level can be
monitored via the window at the back of the machine.
․ Operating this unit without liquid will cause damage to the pump and the heater.
․ If your Antari M-1 Mobile Fog Machine fails to work properly, discontinue use immediately.
Drain all fog liquid from the tank, pack the unit securely (preferably in the original packing
material), and return it to your Antari dealer for service.
․ Always drain fog liquid from the tank before shipping or transporting this unit.
․ Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in contact
with skin or eyes, rinse thoroughly with water.
Unpacking & Inspection
Open the shipping carton and check that all equipment necessary to operate the system has
arrived intact. In addition to this user manual, you should receive the following items:
4
1. M-1 Mobile fogger
2. 12V – 2.3Ah rechargeable battery
3. Rechargeable battery charger
4. 500 cc bottle of Antari fog liquid
5. Briefcase sized Mobile Fogger flight case
․ If any equipment is missing contact your Antari dealer immediately.
․ Before beginning your initial setup of your Antari M-1 Mobile Fog Machine, make sure that
there is no evident damage caused by transportation.
․In the event that the unit’s housing or cable is damaged, do not plug it in and do not attempt
to use it until after contacting your Antari dealer for assistance.
Setup
․Remove all packing materials from the fog machine. Check that all foam and plastic padding
is removed, especially in the nozzle area.
․ Place fog machine on a flat surface and remove fog liquid tank cap.
․ Fill with Antari Fog Liquid (FLM-05) or dealer recommended high-quality water-based fog
fluid. Any other types of fluid can damage the unit. When filled, place cap back on liquid tank.
Be careful not to exceed the maximum fluid level. DO NOT OVERFILL.
․Charge the battery. Plug the adaptor into a grounded electrical outlet. The green light on the
battery charger will light up when it is connected to the power supply. Then connect the
charging head to the battery. Please note the battery required 8 hours charging time on first
charge. Afterwards, the battery will be fully charged in approximately 2~3 hrs.
․The charge will last between 10-12 minutes of constant fog output before needing to be
re-charged.
․Plug the charged battery into the bottom of the M-1 Mobile Fogger with the label face up.
1. Lift-up the plate before inserting the battery.
2. Make sure the battery is inserted on the right position (see photo)
5
․The green light by the front of the handle will flash when the button is first pressed.
This indicates the battery has enough charge to power the M-1.
․When the red light starts to flash, the battery needs to be charged. The machine will
still be able to fog for a short period of time after the red light begins flashing.
Operation
․ To generate smoke, press the button on the front of the M-1 Mobile Fogger’s handle.
․ There are two operation modes that can be selected for the M-1.
1. Operation mode 1. Allows the fog machine to fog as long as the button on the handle or
the remote control is pressed down. Once the button is released, the machine stops
fogging.
2. Operation mode 2. The M1 mobile fog machine produces fog by pressing the button on
the handle or remote controller once. To stop fogging, press the button again.
․Use the small switch on the right side of the M-1. The switch is inside the case and is
adjusted through the small hole on the side of the case.
․To select operation mode 1. Slide the switch towards the back of the M-1 (towards the
cap on the liquid tank).
․To select operation mode 2. Slide the switch towards the front of the M-1 (towards
the nozzle).
․When an optional remote is connected, please see the detailed instructions for its
operation below.
․The machine will fog until the battery charge runs down or the M-1 runs out of fog liquid.
When the M-1 is connected to the optional power adaptor, carefully monitor the level of
the fog liquid to make sure the machine does not run out of liquid. Operating
continuously, the machine will run out of liquid in approximately 50 minutes.
․A full battery charge will power the M-1 for a period of 10-12 minutes before needing to
be recharged. When using the battery, the charge will run down several times before the
fluid needs to be refilled.
Note: There is no warm-up time with the M-1 Mobile Fogger. Unlike most other fog machines,
you do not have to wait for the heater to warm-up before fogging.
Installation
․ The M-1 Mobile Fogger can be carried by hand or installed in a fixed location as desired.
․ Wherever the machine is placed, it is important that fog does not shoot directly at any one’s
face, at open flames or directly into any heat susceptible material.
6
․ The machine can be held or installed at any angle. After refilling the liquid tank, screw the cap
on tightly. Failing to do so will result in leakage if the machine is placed at an angle.
Optional Remote Control Operation
There are two optional remote controls designed for the M-1 Mobile Fogger.
1. MCT-1 Timer Remote Control: This remote control is connected via an 8-meter cord. The
duration of the fog blast is set at 10 seconds. The interval is controlled by the dial on the
remote and is adjustable between 3 and 220 seconds.
2. MCR-1 Wireless Remote Control: This remote control consists of two components. The
transmitter is on a small key chain and has a range of up to 50 meters from the receiver.
The receiver connects to the side of the M-1 Mobile Fogger and can attach to the M-1’s case via a magnetic strip. Pressing the remote control’s button once starts the M-1 fogging. A
second press stops the M-1’s fog output.
Warning: The battery must be removed and the power adaptor unplugged before connecting or
disconnecting either of the remote controls to the M-1 Mobile Fogger.
Optional Dummy Battery and Power Adaptor Set
Users can purchase the optional dummy battery and power adaptor for M-1 (item number:
DCP-12). The power adaptor can be used at AC100~240V power outlets. It can transform AC
power into DC12V and power the M-1 by the dummy battery. This allows for unlimited operation
of the fog machine. The disadvantage is that a power supply is required and the mobility of the M-1
is reduced as a result. The advantage is that the machine can fog continuously over an unlimited
period of tim
Caution
․ Always monitor tank fluid level as you are fogging. Running a fog machine with no fluid can
permanently damage the unit.
․ If you experience low output, pump noise or no output at all, remove the battery immediately.
Check fluid level and re-charge the battery. When the liquid tank is full and the battery is
charged, plug the battery in and press the button on the handle. If the machine is still not
working and you are unable to determine the cause of the problem, do not continue pushing
the remote button, as this may damage the unit. Do not open the case. There are no user
serviceable parts inside. Return the machine to an Antari dealer for service.
․ When the M-1 mobile fog machine is not in use for more than one hour, the battery must be
removed. Otherwise, the battery might be out of order.
7
․ When placing the machine into the flight case, please take off the battery first and place the
battery separately in the flight case.
․ Do not allow the fog liquid to become contaminated. Always replace the cap on the fog liquid
container and the fog machine liquid tank immediately after filling.
․ To prevent damage to the battery by deep discharge and to prevent a reduction of its life, it is
strongly recommended to recharge the battery or operate the mobile fog machine on battery
power at least once every two to three months.
․ It is normal due to the nature of the lead battery, it will lose its storing power slowly over a
period of time. However, when used properly, the lifespan is more than 2 years.
Performance Notes
․ All fog machines develop condensation around the output nozzle. Because this may result in
some moisture accumulation on the surface below the output nozzle, consider this
condensation when installing your unit.
․ Fog machines may sputter small amounts of fog occasionally during operation and for a minute
or so after being turned off. This is normal and is not indicative of a defect.
․ After continuous operation, the case of the fog machine will become warm, especially at the
front of the machine. Take care in handling the machine during and shortly after fogging. Only
carry the M-1 Mobile Fogger by the handle and let the machine cool down before packing it in
a carrying case.
8
M-1 Mobile Fogger
Einleitung
Vielen Dank, dass Sie sich für ein Antari M-1 Nebelgerät entschieden haben. Sie sind nun im Besitz
eines robusten und leistungsstarken Nebelgerätes. Vor Benutzung des Gerätes bitte unbedingt
diese Bedienungs-anleitung sorgfältig lesen. Wenn Sie die Hinweise in dieser Bedienungsanleitung
beachten, können Sie sich in den nä chsten Jahren auf eine zuverlä ssige und überzeugende
Leistung Ihres Antari M-1 Nebelgerätes freuen..
Bitte beachten Sie die folgenden Hinweise in Bezug auf Bedienung, Sicherheit und
Wartung, um eine lange Lebensdauer und einen sicheren Betrieb Ihres Nebelgerä tes
sicherzustellen.
Technische Daten
․ Ausstoß volumen: 8,5 m³/Min.
․ Gesamtanschlusswert: 65W
․ Tankinhalt: 0,11 l
․ Akku: DC 12 V / 2,3 Ah
․ Fluidverbrauch: 0,02 l/Min.
․ Fluid: Antari FLM-05 Fog Liquid
․ Optionale Ferbedienung: MCT-1 (Timer Remote)、MCR-1 (Wireless Remote)
․ Gewicht: 1,8 kg (M-1 und Akku)
․ 5,5 kg (M-1 mit Akku, Ladeteil, Flightcase und 500 ml Fluid)
․ Maß e (B x T x H): 227 x 66 x 81 mm
․ Dauernebel: 10~12 Minuten (Akkubetrieb)
unbegrenzt (bei Netzbetrieb mit ausreichend Fluid)
ACHTUNG!
Bitte beachten Sie alle auf dem Gehäuse Ihres Antari-Nebelgerätes angebrachten Warnhinweise und Anweisungen.
Stromschlaggefahr
1. Vor Nässe schützen.
2. Nur innerhalb geschlossener Räume betreiben. Nicht für den Betrieb im Freien geeignet.
3. Vor Befüllen des Flü ssigkeitstankes immer den Akku entfernen oder Netzteil Ihres Antari M-1
Nebelgerätes vom Netz trennen.
4. Wird das Gerät außer Betrieb genommen, ist der Akku zu entfernen oder das Netzteil vom Netz
zu trennen.
5. Vor Befüllen des Tankes ist Ihr Antari M-1 Nebelgerät immer vom Netz zu trennen.
9
6. Achten Sie darauf, dass das Nebelgerät stets aufrecht installiert ist.
7. Dieses Gerät ist nicht wasser- oder spritzwassergeschü tzt. Sollte Feuchtigkeit, Wasser oder
Nebelfluid in das Geräteinnere eindringen, trennen Sie bitte das Nebelgerä t sofort vom Netz
und verständigen Sie einen Servicetechniker oder Ihren Antari-Händler, bevor Sie das Gerä t
wieder in Betrieb nehmen.
8. Keine zu wartenden Teile im Geräteinnern. Wartungsarbeiten sind nur vom Ihrem
Antari-Händler oder qualifizierten Servicetechnikern durchzufü hren.
Brandgefahr
․Nur fü r Erwachsene. Das Nebelgerät muss außerhalb der Reichweite von Kindern installiert
werden. Betreiben Sie das Gerä t niemals unbeaufsichtigt.
․ Richten Sie die Nebelaustrittsdü se niemals direkt auf Personen.
․ Der Ausstoß des Nebelgerätes ist sehr heiß. Halten Sie während des Betriebes einen
Sicherheitsabstand von mindestens 50 cm zur Austrittsdüse ein.
․ Der Nebeldunst an der Austrittsstelle steht unter Druck und ist sehr heiß.
․ Installieren Sie das Nebelgerä t an einem gut belü fteten Ort. Niemals die Lü ftungsschlitze
verdecken.
․ Richten Sie die Austrittsdü se niemals auf offene Flammen.
․ Wenn die Versorgungsschnur beschä digt wird, muss sie vom Hersteller oder dem
Kundendienst oder ähnlich qualifiziertem Personal ersetzt werden, um eine Gefahr zu
vermeiden.
․Die Austrittdü se wird während des Betriebes sehr heiß. Fü r leicht entflammbare Materialien
muss ein Mindestabstand von 50 cm zur Austrittsdüse eingehalten werden.
․Lassen Sie Ihr Antari-Nebelgerä t vor Reinigungs- und Wartungsarbeiten immer abkü hlen.
Explosionsgefahr
․Akku keiner ü bermä ß igen Hitze aussetzen, von offenen Flammen entfernt halten und nicht
versuchen, das Gehäuse zu entfernen.
․Mischen Sie niemals entzü ndliche Flüssigkeiten jeglicher Art (Ö l, Gas, Duftstoffe) unter das
Nebelfluid.
․Verwenden Sie ausschließ lich hochwertige und von Ihrem Händler empfohlene Nebelfluide
auf Wasser-/Glykolbasis. Andere Nebelfluide können schlechte Effekte erzeugen, zum
Verstopfen oder Tropfen des Gerätes fü hren.
․Achten Sie unbedingt darauf, dass sich immer eine ausreichende Menge Nebelfluid im Tank
befindet. Der Betrieb ohne Nebelfluid führt zu Pumpenschäden und zur Ü berhitzung des
Heizelementes. Der Fluidstand kann ü ber das Fenster an der Rü ckseite des Gerätes
überwacht werden.
․Sollte Ihr Antari-Nebelgerät einmal nicht mehr ordnungsgemäß arbeiten, schalten Sie es bitte
sofort ab. Entleeren Sie den Tank vollständig, verpacken Sie das Gerät sorgfältig (am besten
in der Originalverpackung) und schicken Sie es bei Ihrem Antari-Hä ndler ein.
․Entleeren Sie den Tank immer, bevor Sie das Gerät verschicken oder transportieren.
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.