Analog Way LE - SVU200 Programmer's Guide

Programmer’s Guide

For SVU200

1

A1: Introduction

If you need to use your own Software Control program from a PC or WORKSTATION with an RS-232 or LAN port, the device allows communication
through an ASCII code protocol.

The device treats any character that it receives on the RS-232 or LAN as a possible command but only accepts legal commands.
There is no starting/ending code needed in a command string.

A command can be a single character typed on a keyboard and does not require any special character before or after it.
(It is not necessary to press "ENTER" on the keyboard). A command can be preceded by a value (See chapter A-2).

When the device receives a valid command, it will execute the command. Then it will send back the status of the parameters that have changed due
to this command.

If the command cannot be executed (value out of range, no signal on the selected input),etc. The device will just sends back the current status of
the corresponding parameters.

If the command is invalid, an error response will be returned to the control device. All responses returned to the control device end with
a carriage return <CR> and a line feed <LF> signaling the end of the response character string (see chapter A-3).

A2: Commands structure

The above listed devices share the same code structure.
Commands are made of numerical values for arguments followed by the command characters (one or Two case-sensitive alphabetical letters). Usually the same

characters (letters) are used for the [read Command] as well as the [write command].
The indexes are defined numbers indicating the how the arguments for the command apply. For example a layer number, an input number, a preset number, etc.

They are separated with a comma.
There are commands without index and others with up to 3 indexes. Each index is followed by a comma character. The final argument, also refered to as the “value”

does not have a comma between it and the command.

2

A [write command] is made of indexes followed by the numerical value followed by the command characters.
Write command = [[index,] ...] + Value + Character (s) code (s)
For example: “1,2,0IN” or “4YB”
A [read command] is made of indexes followed immediately by the command characters. (no numerical value)
Read command = [[index,] ...] Character (s) code (s)
For example: “1,2,IN” or “YB”

A3: Examples
Document notation:

1) Command with 1 index : OFORMAT

Command to set the Main output format to XGA: 0,12OF
Answer: OF0,12<CR><LF> which mean that the main output format is now 1024x768

2) Command with 2 indexes : PE_INPUTNUM

Command to set the input 4 displayed in background layer of Next Preset: 1,2,4IN
Answer: IN1,1,4<CR><LF> which mean that the background layer of the next preset will display the input 4 signal

3) Read command without index : TAKEAVA

Read command to know if the TAKE command is available: TA
Answer: TA1<CR><LF> which mean that the device is ready to accept the TAKE command.

4) Read command with 2 indexes : SET_ASPECT_RATIO_OUT

Read command to know how is displayed a signal plugged on the input 4: 3,so
Answer: so3,2<CR><LF> which mean that the input 4 is displayed cropped

3

A4: Error codes

Answer: E10<CR><LF> which mean invalid command
Answer: E11<CR><LF> which mean index value error (index value out of range)
Answer: E12<CR><LF> which mean index number error (too or few indexes)

Some commands are only available as [Read command], they are status and are colored in blue as this line.
Some commands are colored in yellow as this line to indicate they were added or modified in this version.

A5 COMMUNICATION PORTS

4

Read /

Min

Max

Default

Apply factory settings to the

Auto reset

Auto reset

1, …, 8 = Brightness level, 12,5%

progress operation

AXION

AUTO_LOCK

AUTO_TAKE

Automatic Take after an input

AUTO_STEPBACK

Automatic preset toggle after a

Group Name Cmd Resp Description

Request the retrieval of all the
variables

device( except image settings )
FLASH memory writing in

progess. Do not power off

Progress percent of the slow
operation

Forbide the use of a signal-less
input

change

TAKE

SYSTEM

CONTROLS

DIESE # #
READY * * Ready Device Flag Rd 0 1 0

DEV ? DEV MMS device type Rd 84 84 84 84 = SVU-200
UPDATER yU yU Device reboot for update Rd/Wr 0 255 0 1 then 254 => Reboot

FACTORYRESET YR YR
POSMEMORYRESET YE YE Erase stored image settings Rd/Wr 0 1 0
CSTORE YS YS

LOCK YK YK Device locking Rd/Wr 0 2 0

LCDBRIGHTNESS YB YB Front panel display brightness Rd/Wr 1 8 8
KEYBRIGHTNESS Yb Yb Front panel keys brightness Rd/Wr 10 100 100

TBAR_ENABLE YD YD Enable disable T-BAR Rd/Wr 0 1 1

COPKIND CK CK Kind of slow in-

COPPROGRESS CP CP

yA yA Device is driven by Orchestra Rd/Wr 0 1 0

YL YL

YT YT

Ys Ys

FREEZE_MODE Ym Ym Input freeze mode Rd/Wr 0 1 0

Write

Value

value

Rd/Wr 0 1 0

Rd/Wr 0 1 0

Rd 0 1 0

Rd 0 6 0

Rd 0 100 0 Percent : 0 to 100%

Rd/Wr 0 1 1

Rd/Wr 0 1 0

Rd/Wr 0 1 0

Values Index #1 Index #2

value

0= Initialization in progress
1 = Ready

0 = Free
1 = Flash writing in progress
0 = No lock
1 = Locked menu
2 = Locked front panel

step
1, …, 100 = Brightness level, 1%
step

0 = None
1 = Auto centering
2 = Auto setting
3 = StandBy
4 = Picture recording
5 = Reset to default factory
setting
6 = Reset User settings

0 = Device is not driven by ORC­50
1 = Device is driven by Orc-50
0 = Signal less input can be
selected
1 = Signal less input can not be
selected
0 = AUTO-TAKE Disable
1 = AUTO-TAKE Enable
0 = AUTO- PRESET-TOGGLE
Disable
1 = AUTO- PRESET-TOGGLE
Enable
0 = Freeze by input
1 = Freeze all inputs

5

Read /

Min

Max

Default

up input when an input loose

wS wS

wQ wQ

wN wN

wF wF

wR wR

wC wC

Group Name Cmd Resp Description

ELEMENT TRANSITION of the
effect programmable keys
Duration of the effect associated
to the effect programmable keys

Back­its signal

Disable the the black fiilng of the
bakgrounfd live layer

Fill PIP with black depending on
the aspect ratio
Disable Frame and Ids on the
preview output

Standby mode Rd/Wr 0 1 0

Request for standby or wake up Rd/Wr 0 1 0

Message to wake-up an output
display device ( 50 characters)
Message to send an output
display device to sleep ( 50
characters)

Output display device UART
speed

Rd/Wr 0 4 0

STANDBY

VERSION

PROG_KEY_ET YM YM
PROG_KEY_ED YO YO

FRAME_ALERT Yf Yf

TRANSPARENT_BACKGROUND Yt Yt

BLACK_FILL bF bF
DISABLE_ID bI bI
STDBYSTATUS
STDBYREQUEST
STDBYPROJ_ON

STDBYPROJ_OFF

STDBYPROJ_RATE

STDBYPROJ_CTRL

VERI1 xi xi Byte 0 and 1 of the device ID Rd 0 65535 0 ex : AAAA
VERI2 xj xj Byte 2 and 3 of the device ID Rd 0 65535 0 ex : AAAA
VERI3 xk xk Byte 4 and 5 of the device ID Rd 0 65535 0 ex : AAAA
VERI4 xl xl Byte 6 and 7 of the device ID Rd 0 65535 0 ex : AAAA

Write

Value

value

Rd/Wr 0 2 2
Rd/Wr 0 255 10 Unit = 1/10s

Rd/Wr 0 9 0

Rd/Wr 0 1 1

Rd/Wr 0 1 0
Rd/Wr 0 1 0

Rd/Wr 0 255 0 min = 0 max = 49

Rd/Wr 0 255 0 min = 0 max = 49

Rd/Wr 0 3 2

Values Index #1 Index #2

value

0 = Cut
2 = Fade

0 = No input
1 = Input1
2 = Input2
3 = Input3
4 = Input4
9 = Input9
0 = use BLACK_FILL
1 = Disable black filling only for
background
0 = Disable black filling
1 = Enable black filling

0 = Normal mode
1 = Standby mode
0 = Wake up
1 = Standby

0 = 1200bauds
1 = 2400bauds
2 = 9600bauds
3 = 19200bauds
0 = No request
1 = Wake up request
2 = Standby request
3 = Clear Wake up message
4 = Clear standby message

0 = Fade
programmable key
0 = Fade
programmable key

6

Read /

Min

Max

Default

bit 6 = SDI In 2 board (SDI 3 and

Auto

Auto

Group Name Cmd Resp Description

VERK xK xK

VERV xV xV Variable set version Rd 0 65535 42
VERUPD xU xU Updater version Rd 0 65535 0

OPT yo yo Detected options Rd 0 65535 0

REV xR xR Moher board revision Rd 0 255 0
IN_AUTOSET_ALL Ia Ia

INPUT

IN_AUTOSET Ii Ii

Checksum/version of the
programmable components

-setting request for all the

inputs

-setting request for the

specified input

Write

Value

value

Rd/Wr 0 65535 0

Rd/Wr 0 1 0

Rd/Wr 0 1 0

Values Index #1 Index #2

value

bit 0 = Lan Module
bit 1 = SDI In 1 board (SDI 1 and

2)
bit 2 = Recording board
bit 3 = CF Caecina
bit 4 = CF Fannia
bit 5 = CF Thrasea

4)
bit 7 = Audio Evolution
bit 8 = HDCP DVI In Evolution

0 = Number of
programmables
components
1 = Main micro­controler
2 = Front panel
micro-controler
3 = FPGA Caecina
6 = Synchro CPLD

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

7

Read /

Min

Max

Default

Group Name Cmd Resp Description

IN_USR_FORMAT iU iU

Format/standard of the input
signal corrected by user

Write

Value

value

Rd/Wr 0 42 0

Values Index #1 Index #2

value

0 = None
1 = Invalid
2 = Unknown
3 = SDTV NTSC
4 = SDTV PAL
5 = SDTV SECAM
6 = SDTV BW
7 = SDTV 480i
8 = SDTV 576i
9 = EDTV 480p
10 = EDTV 576p
11 = HDTV 720p
12 = HDTV 1035i
13 = HDTV 1080i
14 = HDTV 1080p
15 = HDTV 1080sF
16 = CPU VGA
17 = CPU 800x480
18 = CPU WVGA
19 = CPU SVGA
20 = CPU 1280x600
21 = CPU 720p RGB
22 = CPU XGA
23 = CPU WXGA
24 = CPU SWXGA
25 = CPU 800p RGB
26 = CPU SWXGA+
27 = CPU 1152x864
28 = CPU 900p RGB
29 = CPU 1600x900
30 = CPU 960p RGB
31 = CPU SXGA
32 = CPU 1360x1024
33 = CPU DILA4/3
34 = CPU SXGA+
35 = CPU WSXGA+
36 = CPU 1080p RGB
37 = CPU 2K
38 = CPU UXGA
39 = CPU WUXGA
40 = CPU 1920x1440
41 = CPU QXGA
42 = CPU 1366x768

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

8

Read /

Min

Max

Default

6 = Computer H&V or Composite

Analog H sync load

Group Name Cmd Resp Description

IN_TYPE iK iK Input signal type Rd/Wr 0 17 13

IN_SYNC_LOAD il il

IN_USED iu iu Input is enabled Rd/Wr 0 1 1

IN_SD_STD iS iS Decoded video standard Rd/Wr 0 7 0

9

Rd/Wr 0 1 0

Write

Value

value

Values Index #1 Index #2

value

0 = SDTV Composite
1 = SDTV Y/C
2 = SDTV/EDTV/HDTV RGBS
TTL/Analog
3 = SDTV/EDTV/HDTV RGB
SOG
4 = SDTV/EDTV/HDTV YUV
5 = Computer SOG

(TTL/Analog)
7 = Computer B&W
8 = DVI-D EDTV/HDTV RGB 16­235
9 = DVI-D EDTV/HDTV YUV
10 = DVI-D Computer RGB 0­255
11 = DVI-D Computer RGB 16­235
12 = SDI SDTV/HDTV
13 = Analog Computer,
separated H&V synchro
14 = Analog Computer,
composite TTL synchro
15 = Analog Computer,
composite analog synchro
16 = Analog RGB video,
composite TTL synchro
17 = Analog RGB video,
composite analog synchro

0 = Hi-Z
1 = 75 ohm loaded

0 = Auto
1 = NTSC (M,J)
2 = PAL (BDGHIN)
3 = PAL (M)
4 = PAL (N-Combination)
5 = NTSC 4.43
6 = SECAM
7 = PAL 60

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

Read /

Min

Max

Default

1 = VCR Source ( Video cassette

Group Name Cmd Resp Description

IN_SD_STA iV iV Video Signal stability Rd/Wr 0 1 1

IN_SYNCHRONIZED iY iY VIS Synchronisation group Rd/Wr 0 2 0

Enable/disable the HDCP support
of a DVI input

INPUT STATUS

IN_HDCP_ENABLE iH iH

IN_HDCP_CABLE_LEN iC iC Lenght of an DVI input cable Rd/Wr 0 2 0

SIG_HPOL sh sh Input H sync polarity Rd 0 1 0

SIG_VPOL sv sv Input V sync polarity Rd 0 1 0

SIG_SYNC_TYPE sK sK Input sync type Rd 0 3 0

SIG_FREQ_FIELD sf sf Input frame frequency Rd 0 65535 0 Unit = 1/100Hz

SIG_FREQ_LINE sl sl Input line frequency Rd 0 65535 0 Unit = 1/100Hz

Write

Value

value

Rd/Wr 0 1 1

Values Index #1 Index #2

value

0 = Stable Source ( DVD )
recorder )
0 = Does not belong to any VIS

Group
1 = Groupe VIS 1 group for
analog input
2 = Groupe VIS 2 group for
analog input

0 = Less than 10 meter cable
length
1 = 5 to 20 meters cable length
2 = More than 15 meters cable
length

0 = Negative Synchro
1 = Positive Synchro

0 = Negative Synchro
1 = Positive Synchro

0 = Séparated Synchros H&V
1 = Composite TTL Synchro
2 = Composite Analog Synchro
3 = Synchro on Green (SOG)

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

10

Read /

Min

Max

Default

Group Name Cmd Resp Description

SIG_COMPLETE sc sc Input scan completed Rd 0 1 0

Write

Value

value

Values Index #1 Index #2

value

0 = scan in progress or failed
1 = scan completed

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

11

Read /

Min

Max

Default

Group Name Cmd Resp Description

SIG_DETECTED_FORMAT sD sD Input detected format name Rd 0 42 0

Write

Value

value

Values Index #1 Index #2

value

0 = None
1 = Invalid
2 = Unknown
3 = SDTV NTSC
4 = SDTV PAL
5 = SDTV SECAM
6 = SDTV BW
7 = SDTV 480i
8 = SDTV 576i
9 = EDTV 480p
10 = EDTV 576p
11 = HDTV 720p
12 = HDTV 1035i
13 = HDTV 1080i
14 = HDTV 1080p
15 = HDTV 1080sF
16 = CPU VGA
17 = CPU 800x480
18 = CPU WVGA
19 = CPU SVGA
20 = CPU 1280x600
21 = CPU 720p RGB
22 = CPU XGA
23 = CPU WXGA
24 = CPU SWXGA
25 = CPU 800p RGB
26 = CPU SWXGA+
27 = CPU 1152x864
28 = CPU 900p RGB
29 = CPU 1600x900
30 = CPU 960p RGB
31 = CPU SXGA
32 = CPU 1360x1024
33 = CPU DILA4/3
34 = CPU SXGA+
35 = CPU WSXGA+
36 = CPU 1080p RGB
37 = CPU 2K
38 = CPU UXGA
39 = CPU WUXGA
40 = CPU 1920x1440
41 = CPU QXGA
42 = CPU 1366x768

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

12

Read /

Min

Max

Default

Group Name Cmd Resp Description

SIG_CURRENT_FORMAT sF sF Input current format name Rd 0 42 0

Write

Value

value

Values Index #1 Index #2

value

0 = None
1 = Invalid
2 = Unknown
3 = SDTV NTSC
4 = SDTV PAL
5 = SDTV SECAM
6 = SDTV BW
7 = SDTV 480i
8 = SDTV 576i
9 = EDTV 480p
10 = EDTV 576p
11 = HDTV 720p
12 = HDTV 1035i
13 = HDTV 1080i
14 = HDTV 1080p
15 = HDTV 1080sF
16 = CPU VGA
17 = CPU 800x480
18 = CPU WVGA
19 = CPU SVGA
20 = CPU 1280x600
21 = CPU 720p RGB
22 = CPU XGA
23 = CPU WXGA
24 = CPU SWXGA
25 = CPU 800p RGB
26 = CPU SWXGA+
27 = CPU 1152x864
28 = CPU 900p RGB
29 = CPU 1600x900
30 = CPU 960p RGB
31 = CPU SXGA
32 = CPU 1360x1024
33 = CPU DILA4/3
34 = CPU SXGA+
35 = CPU WSXGA+
36 = CPU 1080p RGB
37 = CPU 2K
38 = CPU UXGA
39 = CPU WUXGA
40 = CPU 1920x1440
41 = CPU QXGA
42 = CPU 1366x768

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

13

Read /

Min

Max

Default

with the detected format

Group Name Cmd Resp Description

SIG_FORMAT_LIST sL sL

SIG_SCANTYPE ss ss Input scan type Rd 0 3 0

SIG_HTOTAL_THEORIC sH sH Total number of pixels per line Rd 0 65535 0 Unit = pixels

SIG_HTOTAL_MAXI sM sM

SIG_WIDTH sw sw Input displayed pixel count Rd 0 65535 0 Unit = pixels

SIG_HEIGHT st st Input displayed line count Rd 0 65535 0 Unit = pixels

SIG_HDCP sn sn Input HDCP status Rd 0 1 0

Bit field of the fomats compatible

Maximal number of pixels per
input line

Write

Value

value

Rd 0 255 0

Rd 0 65535 0 Unit = pixels

Values Index #1 Index #2

value

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

0 = Progressive
1 = Interleaved, Top field first
2 = Interleaved, Bottom field first
3 = Segmented frame

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

0 = Bits 0 to 7
Slice
1 = Bits 8 to 15
Slice
2 = Bits 16 to 23
Slice
3 = Bits 24 to 31
Slice
4 = Bits 32 to 39
Slice
5 = Bits 40 to 47
Slice

14

Read /

Min

Max

Default

Group Name Cmd Resp Description

SIG_MEM_SLOT sS sS Memory slot index Rd 0 255 255

SET_HPOS SH SH Input horizontal position Rd/Wr 0 2048 1024 1024 = neutral

SET_VPOS SV SV Input vertical position Rd/Wr 0 2048 1024 1024 = neutral

SET_HSIZE Sw Sw Input horizontal size Rd/Wr 0 4096 2048 2048 = neutral

SET_VSIZE Sh Sh Input vertical size Rd/Wr 0 4096 2048 2048 = neutral

INPUT
SETTINGS

SET_BRIGHTNESS Sg Sg Input brightness Rd/Wr 0 255 128 128 = neutral

SET_CONTRAST Sc Sc Input Contrast Rd/Wr 0 255 128 128 = neutral

SET_COLOR Sr Sr Input color level Rd/Wr 0 255 128 128 = neutral

SET_HUE Su Su Input hue (NTSC only) Rd/Wr 0 255 128 128 = neutral

Write

Value

value

Values Index #1 Index #2

value

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

15

Read /

Min

Max

Default

Auto reset

ADC R channel adjustment

ADC G channel adjustment

ADC B channel adjustment

Group Name Cmd Resp Description

SET_HTOTAL ST ST Input total pixel per line Rd/Wr 0 65535 0 Unit = pixels.

SET_PHASE SS SS Input Phase Rd/Wr 0 31 16

SET_AUTOCAD Sa Sa Input autocentering reques Rd/Wr 0 1 0

SET_USER_GAIN_R sr sr

SET_USER_GAIN_G sg sg

SET_USER_GAIN_B sb sb

SET_PULLDOWN_2_2 Sn Sn

SET_PULLDOWN_3_2 Sp Sp

SET_CROP_WIN_POS_H SI SI

(advanced setting)

(advanced setting)

(advanced setting)

Enable/disable the auto 2:2
pulldown

Enable/disable the auto 3:2
pulldown

Cropping window horizontal
position

Write

Value

value

Rd/Wr 0 255 128 128 = neutral

Rd/Wr 0 255 128 128 = neutral

Rd/Wr 0 255 128 128 = neutral

Rd/Wr 0 1 1

Rd/Wr 0 1 1

Rd/Wr 0 65535 32768

Values Index #1 Index #2

value

0 = Disable automatic detection
1 = Enable automatic detection

0 = Disable automatic detection
1 = Enable automatic detection

Percent = 65535 = 100% : all
cropping on the left

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

16

Read /

Min

Max

Default

distorted, no black bands

Group Name Cmd Resp Description

SET_CROP_WIN_POS_V SJ SJ Cropping window vertical position Rd/Wr 0 65535 32768

SET_CROP_WIN_SIZE_H SK SK Horizontal cropping Rd/Wr 0 58981 0 Percent = 65535 = 100%

SET_CROP_WIN_SIZE_V SL SL Vertical cropping Rd/Wr 0 58981 0 Percent = 65535 = 100%

SET_ASPECT_RATIO_IN si si Input image aspect ratio Rd/Wr 0 4 0

SET_ASPECT_RATIO_OUT so so Output image aspect ratio Rd/Wr 0 3 1

SET_OVER_SCAN sO sO input image Overscan/Underscan Rd/Wr 0 1 1

SET_FORCE_4_3 SF SF

SET_RESET_SETTINGS Ss Ss Current input default settings Rd/Wr 0 1 0

Force the aspect ratio of
PAL/NTSC input to 4/3

Write

Value

value

Rd/Wr 0 1 1 1 = forced

Values Index #1 Index #2

value

Percent = 65535 = 100% : all
cropping on the top

0 = 4/3 Fullscreen
1 = 4/3 with 16/9 content + black
stripes
2 = 4/3 with 2.35 content + black
stripes
3 = 4/3 with 16/9 content without
black stripes
4 = 19/9 with 4/3 content + black
stripes
0 = Distorted, input aspect ratio
not preserved
1 = Not distorted, black bands
added
2 = Not
added
3 = Not distorted and no scaling

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

17

Read /

Min

Max

Default

Aa Aa Auxiliary input mixing enable

Group Name Cmd Resp Description

SET_FREEZE Sf Sf Freeze of the input Rd/Wr 0 1 0 1 = Freeze

0 : max correction; 15 : min
correction

Displayed input number or frame
or logo number

PRESET
ELEMENT

SET_MOTION_DETECT Sm Sm

PE_INPUTNUM IN IN

PE_SOURCENUM IS IS Source number Rd/Wr 0 64 0 Same Orc-50

PE_AUDIO_AUX_MUTE

Write

Value

value

Rd/Wr 0 15 15

Rd/Wr 0 9 0

Rd/Wr 0 1 0 1 = Enable.

Values Index #1 Index #2

value

0 = No input
1 = Input1
2 = Input2
3 = Input3
4 = Input4
9 = Input9

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

18

Read /

Min

Max

Default

Group Name Cmd Resp Description

PE_SMOOTH_MOVE ps ps « Smooth Move » activation Rd/Wr 0 1 1 1 = Enable.

PE_NEW_ID pN pN Unique layer identifier number Rd/Wr 0 1 0

PE_POS_H pH pH

Layer left H position on output
screen

Write

Value

value

value

Rd/Wr 0 65535 32768

Values Index #1 Index #2

0 = Current preset
1 = Next preset
2 = Previous
preset

Unit = pixels ( 32768 = screen
left border )

3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

19

Read /

Min

Max

Default

Group Name Cmd Resp Description

PE_POS_V pV pV

PE_SIZE_H pW pW

PE_SIZE_V pS pS

Layer top V position on output
screen

Layer H size on output screen
(without borders)

Layer V size on output screen
(without borders)

Write

Value

value

value

Rd/Wr 0 65535 32768

Rd/Wr 0 65535 1600

Rd/Wr 0 65535 1200

Values Index #1 Index #2

0 = Current preset
1 = Next preset
2 = Previous
preset

Unit = pixels ( 32768 = screen
top border )

Unit = pixels ( Max=16x2048 =

32768)

Unit = pixels (Max=16x2048 =

32768)

3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

20

Read /

Min

Max

Default

Group Name Cmd Resp Description

PE_CROP_WIN_POS_H CH CH

PE_CROP_WIN_POS_V CV CV Cropping window vertical position Rd/Wr 0 65535 32768

PE_CROP_WIN_SIZE_H CW CW Horizontal cropping Rd/Wr 0 58981 0 Percent = 65535 = 100%

Cropping window horizontal
position

Write

Value

value

value

Rd/Wr 0 65535 32768

Values Index #1 Index #2

0 = Current preset
1 = Next preset
2 = Previous
preset

Unit = percent ( 65535 = 100%
= : all cropping on the left )

Unit = percent ( 65535 = 100%
= : all cropping on the top )

3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

21

Read /

Min

Max

Default

Group Name Cmd Resp Description

PE_CROP_WIN_SIZE_V CS CS Vertical cropping Rd/Wr 0 58981 0 Percent = 65535 = 100%

PE_ALPHA pA pA Layer transparency Rd/Wr 0 255 255

PE_BORDER_STYLE bS bS Border style Rd/Wr 0 0 0 0 = No border

Write

Value

value

Values Index #1 Index #2

value

0 = 100% = transparent
255 = 0% = visible

0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

22

Read /

Min

Max

Default

Group Name Cmd Resp Description

PE_BORDER_COLOR bC bC Border color Rd/Wr 0 544 33 Color number

PE_BORDER_ALPHA bA bA Border transparency Rd/Wr 0 255 255

PE_BORDER_SIZE_H bH bH Border H size Rd/Wr 0 127 10 Unit = pixels

Write

Value

value

Values Index #1 Index #2

value

0 = 100% = transparent
255 = 0% = visible

0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

23

Read /

Min

Max

Default

Group Name Cmd Resp Description

PE_BORDER_SIZE_V bV bV Border V size Rd/Wr 0 127 10 Unit = pixels

PE_OPENING_TRANSITION oT oT Layer opening transition type Rd/Wr 0 2 2

PE_OPENING_TRANSITION_WAY oW oW Layer opening transition direction Rd/Wr 0 10 0

Write

Value

value

Values Index #1 Index #2

value

0 = Cut
2 = Fade

0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

24

Read /

Min

Max

Default

Group Name Cmd Resp Description

PE_OPENING_DURATION oD oD Layer opening transition duration Rd/Wr 0 255 10 Unit = 1/10s

PE_CLOSING_TRANSITION cT cT Layer closing transition type Rd/Wr 0 2 2

PE_CLOSING_TRANSITION_WAY cW cW Layer closing transition direction Rd/Wr 0 10 0

Write

Value

value

Values Index #1 Index #2

value

0 = Cut
2 = Fade

0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4
0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

25

Read /

Min

Max

Default

Available TAKE flag

Auto reset

Anti

Group Name Cmd Resp Description

PE_CLOSING_DURATION cD cD Layer closing transition duration Rd/Wr 0 255 10 Unit = 1/10s

TAKE, Next preset becomes
Current

Previewed layed (layer that is
visible on preview screen)

Quadravision Layout request
(auto-reset)

-flicker level Rd/Wr 0 7 2 0 = No antif-flicker 0 = Main output

PRESET
CONTROL

SETTINGS

TAKE TK TK
TAKEAVA TA TA

TAKEINFO TI TI TAKE information Rd 0 2 0
TBAR NT NT TBAR value Rd/Wr 0 10000 0 Unit = 0,01%

COPY_FROM Nf Nf Source for preset copy Rd/Wr 0 6 0

COPY_TO Nt Nt Destination for preset copy Rd/Wr 0 6 0

COPY_CTRL Nc Nc Preset copy control Rd/Wr 0 1 0

PREVIEWED_LAYER NC NC

SET_QUAD_LAYOUT NQ NQ
R_FLICK Rf Rf

R_GAMMA Rg Rg Gamma correction level Rd/Wr 5 40 10 Unit = 1/10 0 = Main output
R_SHARPNESS Rs Rs Sharpness correction Level Rd/Wr 0 255 128 128 = neutral 0 = Main output

Write

Value

value

Rd/Wr 0 1 0

Rd 0 1 1

Rd/Wr 2 7 2

Rd/Wr 0 25 0

Values Index #1 Index #2

value

0 = 1 shot TAKE
1 = 2 shot TAKE
2 = Sequenced TAKE

0 = Current preset
1 = Next preset
2 = Previous preset
3 = Memory Preset 1
4 = Memory Preset 2
5 = Memory Preset 3
6 = Memory Preset 4
0 = Current preset
1 = Next preset
2 = Previous preset
3 = Memory Preset 1
4 = Memory Preset 2
5 = Memory Preset 3
6 = Memory Preset 4

2 = Background Layer for output
1
8 = Audio Output 1
9 = Audio Output 2

0 = Current preset
1 = Next preset
2 = Previous
preset
3 = Memory
Preset 1
4 = Memory
Preset 2
5 = Memory
Preset 3
6 = Memory
Preset 4

2 = Background
Layer for output 1
8 = Audio Output 1
9 = Audio Output 2

26

Read /

Min

Max

Default

Group Name Cmd Resp Description

OUTPUT OFORMAT OF OF Output format Rd/Wr 0 37 0

Write

Value

value

Values Index #1 Index #2

value

0 = PAL
1 = NTSC
2 = 480p
3 = 576p
4 = SMPTE296M
5 = SMPTE260M
6 = SMPTE274M
7 = SMPTE274M
8 = SMPTE274M
9 = 640 x 480 4/3
10 = 848 x 480 16/9
11 = 800 x 600 4/3
12 = 1024 x 768 4/3
13 = 1360 x 768 16/9
14 = 1280 x 800 16/9
15 = 1280 x 1024 5/4
16 = 1400 x 1050 5/3
17 = 1680 x 1050 16/9
18 = 1600 x 1200 4/3
19 = 1920 x 1200 16/9
20 = 2048 x 1080
21 = 1280 x 720 16/9
22 = 1920 x 1080 16/9
23 = 1920 x 1080 16/9 (HD)
24 = 1920 x 1080 16/9 (SHARP)
25 = 1920 x 1080 16/9 (SHARP

2)
26 = 1440 x 900 16/10
27 = 1280 x 768 15/9
28 = 1366 x 800 15/9
29 = 1366 x 768 16/9
30 = Computer Custom 1
31 = Computer Custom 2
32 = Computer Custom 3
33 = Computer Custom 4
34 = Computer Custom 5
35 = Computer Custom 6
36 = Computer Custom 7
37 = Computer Custom 8

0 = Main output

27

Read /

Min

Max

Default

Analog output type

Analog output sync polarity

Group Name Cmd Resp Description

ORATE OR OR Output rate Rd/Wr 0 12 8

OSIGTYPEANALOG OA OA

OSIGTYPEDIGITAL OD OD Digital output type Rd/Wr 0 2 0

OSYNCPOL OS OS

Write

Value

value

Rd/Wr 0 3 0

Rd/Wr 0 3 0

Values Index #1 Index #2

value

0 = Custom Field Rate
1 = 23,97 Hz
2 = 24 Hz
3 = 25 Hz
4 = 29,97 Hz
5 = 30 Hz
6 = 50 Hz
7 = 59,94 Hz
8 = 60 Hz
9 = 72 Hz
10 = 75 Hz
11 = 85 Hz
12 = 100 Hz
0 = RGBs
1 = RGsB (SOG)
2 = RGB H&V
3 = YUV
0 = RGB 0-255 ( full scale )
1 = RGB 16-235 ( reduced
scale )
2 = YUV
0 = negative H&V synchro
1 = Synchros H négative et V
positive
2 = Synchros H positive et V
négative
3 = Synchros H et V positives

0 = Main output

0 = Main output

0 = Main output

0 = Main output

28

Read /

Min

Max

Default

Group Name Cmd Resp Description

OBACKCOLORPREDEF OC OC

OBACKCOLORHUE OG OG Output background hue Rd/Wr 0 240 160 0 = Main output
OBACKCOLORSAT OJ OJ Output background saturation Rd/Wr 0 240 0 0 = Main output
OBACKCOLORLUMA OI OI Output background brightness Rd/Wr 0 240 0 0 = Main output

OPATTERN OP OP Output test pattern Rd/Wr 0 8 0

Output background pre-defined
color

Write

Value

value

Rd/Wr 0 32 0

Values Index #1 Index #2

value

0 = Black
1 = Navy blue
2 = Blue
3 = Green Blue
4 = Water Blue
5 = Turquoise blue
6 = Dark green
7 = Green
8 = Lime
9 = Light green
10 = Dark red
11 = Red
12 = Tomato red
13 = Bordeaux
14 = Brown
15 = Chocolate
16 = Orange
17 = Gold
18 = Yellow
19 = Indigo blue
20 = Purple
21 = Light red
22 = Fuchsia
23 = Salmon
24 = Rose
25 = Olive reen
26 = Grey
27 = Silver
28 = Lavender blue
29 = Beige
30 = Azur
31 = White
32 = Custom

0 = No pattern
1 = Vertical Grey Scale
2 = Horizontal Grey Scale
3 = Vertical Color Bar
4 = Horizontal Color Bar
5 = Grid
6 = SMPTE
7 = Burst
8 = Centering

0 = Main output

0 = Main output

29

Read /

Min

Max

Default

Xr Xr

Xe Xe

Xm Xm

Xc Xc

Group Name Cmd Resp Description

OBLACK OB OB Output black control Rd/Wr 0 1 0
OUTIL_H OH OH Output H size Rd 0 65535 1600 Unit = pixels 0 = Main output

OUTIL_V OV OV Output V size Rd 0 65535 1200 Unit = pixels 0 = Main output
OFIELDRATE OT OT Output frame frequency Rd 100 10000 6000 Unit = 1/100Hz 0 = Main output
OIMAGE_OVERSCAN OO OO Image Overscan / Underscan Rd/Wr 0 1 0 0 = Main output

Enable/disable the Output HDCP
detection

Framelock source requested by
user

Current Frame Lock source Rd/Wr 0 14 0

Follow mode requested by user Rd/Wr 0 5 0

Current follow mode Rd/Wr 0 5 0

REFERENCE

OSETDETECTHDCP Oh Oh

OISHDCP On On Output HDCP status Rd 0 1 0 0 = Main output

REFREQUEST

REFCURRENTREQUEST

REFMODE

REFCURRENTMODE

Write

Value

value

Rd/Wr 0 4 1

Rd/Wr 0 14 0

Values Index #1 Index #2

value

0 = Normal output
1 = Black output

0 = Disable HDCP detection
1 = Automatic HDCP detection
2 = HDCP Configuration 1
3 = HDCP Configuration 2
4 = HDCP Configuration 3

0 = Analog input 1 as reference
1 = Analog input 2 as reference
2 = Analog input 3 as reference
3 = Analog input 4 as reference
8 = DVI 1 input as reference
9 = DVI 2 input as reference
10 = SDI 1 input as reference
11 = SDI 2 input as reference
12 = SDI 3 input as reference
13 = SDI 4 input as reference
14 = Back End 1 as reference
0 = Analog input 1 as reference
1 = Analog input 2 as reference
2 = Analog input 3 as reference
3 = Analog input 4 as reference
8 = DVI 1 input as reference
9 = DVI 2 input as reference
10 = SDI 1 input as reference
11 = SDI 2 input as reference
12 = SDI 3 input as reference
13 = SDI 4 input as reference
14 = Back End 1 as reference
0 = Internal
1 = Follow x1/2
2 = Follow x1
3 = Follow x2
4 = Follow x3
5 = Asynchronous Follow
0 = Internal
1 = Follow x1/2
2 = Follow x1
3 = Follow x2
4 = Follow x3
5 = Asynchronous Follow

0 = Main output

0 = Main output

0 = Main output

0 = Main output

0 = Main output

0 = Main output

30

Read /

Min

Max

Default

Xt Xt

Xl Xl

Auto reset

Auto reset

1 = IP address mid

2 = IP address mid

3 = IP address low

Group Name Cmd Resp Description

REFFREQ
REFLOCKSTATUS

LANENABLE ne ne LAN enable Rd/Wr 0 1 0

LANRESET nr nr LAN factory parameters reset Rd/Wr 0 1 0
LANSTORE ns ns LAN parameters update Rd/Wr 0 1 0

LAN

EDID EDID_FORMAT EF EF EDID preferred format Rd/Wr 0 21 0

LANIP nw nw LAN devices addresses Rd/Wr 0 255 192 IP : 0 to 255

LANPORT np np LAN port numbers Rd/Wr 0 65535 10500
LANNETMASK nk nk LAN netmask Rd/Wr 0 24 8 Number of 0bits from the right
LANPROTOCOL nt nt LAN protocol Rd/Wr 0 1 1

Frame rate of the reference signal Rd 0 65535 0 Unit = 1/100Hz 0 = Main output

Framelock locked status Rd 0 1 0 1 = locked 0 = Main output

Write

Value

value

Values Index #1 Index #2

value

0 = Enable RS232 ( disable
LAN )
1 = Enable LAN ( disable
RS232 )

Local port : 10000 à 10999
Remote port : 0 à 65500

0 = UDP Protocol
1 = TCP protocol
2 = AMX Protocol
0 = VGA
1 = 800x480
2 = WVGA
3 = SVGA
4 = 720pRGB
5 = XGA
6 = WXGA
7 = SWXGA
8 = 800pRGB
9 = 1152x864
10 = 900pRGB
11 = 1600x900
12 = 960pRGB
13 = SXGA
14 = 1360x1024
15 = SXGA+
16 = WSXGA+
17 = 1080pRGB
18 = 2K
19 = UXGA
20 = WUXGA
21 = Custom

0 = Device
1 = Remote
2 = Gateway

0 = Device
1 = Remote
2 = Gateway

0 = Analog input 1
1 = Analog input 2
3 = DVI-D input 1

0 = IP address
high byte

high byte
low high byte
byte

31

Read /

Min

Max

Default

AUDIO

AUDIO_INPUT_MODE

Af Af Audio mode

AUDIO_INPUT_MAP

Ai Ai Audio input map

AUDIO_LEVEL

AL AL Audio input level

AUDIO_AUX_LEVEL

Al Al Audio

AUDIO_BALANCE

Ab Ab Audio input balance

AUDIO_AUX_BALANCE

AB AB Audio auxiliary input balance

AUDIO_MUTE

Au Au Audio output Mute control

AUDIO_MASTER_VOLUME

AV AV

AUDIO_MODE

Am Am Audio stero mode

AUDIO_DELAY

AD AD

AUDIO_AUTO_DELAY

Ae Ae Automatic audio delay

0 = réglage manuel du Delay, 1 =

Group Name Cmd Resp Description

EDID_RATE ER ER EDID preferred frame frequency Rd/Wr 0 5 0

EDID_REQUEST ES ES Request for an EDID Rd/Wr 0 2 0

auxiliary input level Rd/Wr 0 255 45 Linear scale, init value is 0 dB

Output Master volume Rd/Wr 0 255 255 0 = mute, 32 = -18dB , 255 = 0dB 0 = Main output

Delay between audio and video Rd/Wr 0 80 0

Write

Value

value

Rd/Wr 0 1 1

Rd/Wr 0 9 1

Rd/Wr 0 255 45 Linear scale, init value is 0 dB

Rd/Wr 0 90 45

Rd/Wr 0 90 45

Rd/Wr 0 1 0 1 = Mute. 0 = Main output

Rd/Wr 0 1 1

Rd/Wr 0 1 1

Values Index #1 Index #2

value

0 = 50 Hz
1 = 60 Hz
2 = 72 Hz
3 = 75 Hz
4 = 85 Hz
5 = Custom
0 = EDID is ready
1 = EDID saving
2 = EDID reading
0 = Free choice of audio input
1 = Audio input follow the top
layers
0 = No input
1 = Input1
2 = Input2
3 = Input3
4 = Input4
9 = Input9

0 = max to the left, 45 =
centered, 90 = max to the right

0 = max to the left, 45 =
centered, 90 = max to the right

0 = mono
1 = Stereo
0 = no delay
500ms = max delay

reglage automatique du delay

0 = Analog input 1
1 = Analog input 2
3 = DVI-D input 1

0 = Analog input 1
1 = Analog input 2
3 = DVI-D input 1

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

0 = Input1
1 = Input2
2 = Input3
3 = Input4
8 = Input9

0 = Main output
0 = Main output

32

33