Analog Way EKS500 User Manual

Programmer’s Guide

For EKS500

1

A1: Introduction

If you need to use your own Software Control program from a PC or WORKSTATION with an RS-232 or LAN port, the device allows communication through an ASCII code protocol.

The device treats any character that it receives on the RS-232 or LAN as a possible command but only accepts legal commands. There is no starting/ending code needed in a command string.

A command can be a single character typed on a keyboard and does not require any special character before or after it. (It is not necessary to press "ENTER" on the keyboard). A command can be preceded by a value (See chapter A-2).

When the device receives a valid command, it will execute the command. Then it will send back the status of the parameters that have changed due to this command.

If the command cannot be executed (value out of range, no signal on the selected input),etc. The device will just sends back the current status of the corresponding parameters.

If the command is invalid, an error response will be returned to the control device. All responses returned to the control device end with a carriage return <CR> and a line feed <LF> signaling the end of the response character string (see chapter A-3).

A2: Commands structure

The above listed devices share the same code structure. Commands are made of numerical values for arguments followed by the command characters (one or Two case-sensitive alphabetical letters). Usually the same

characters (letters) are used for the [read Command] as well as the [write command]. The indexes are defined numbers indicating the how the arguments for the command apply. For example a layer number, an input number, a preset number, etc.

They are separated with a comma. There are commands without index and others with up to 3 indexes. Each index is followed by a comma character. The final argument, also refered to as the “value”

does not have a comma between it and the command.

2

A [write command] is made of indexes followed by the numerical value followed by the command characters. Write command = [[index,] ...] + Value + Character (s) code (s) For example: “1,2,0IN” or “4YB” A [read command] is made of indexes followed immediately by the command characters. (no numerical value) Read command = [[index,] ...] Character (s) code (s) For example: “1,2,IN” or “YB”

A3: Examples Document notation:

1) Command without index : SWITCHER_MODE

Command to set the switcher mode to mixer mode: 0CM Answer: CM0<CR><LF> which mean that the device is now working in mixer mode.

2) Command with 1 index : OFORMAT

Command to set the Main output format to XGA: 0,12OF Answer: OF0,12<CR><LF> which mean that the main output format is now 1024x768

3) Command with 2 indexes : PE_INPUTNUM

Command to set the input 4 displayed in background layer of Next Preset: 1,2,4IN Answer: IN1,1,4<CR><LF> which mean that the background layer of the next preset will display the input 4 signal

4) Read command without index : TAKEAVA

Read command to know if the TAKE command is available: TA Answer: TA1<CR><LF> which mean that the device is ready to accept the TAKE command.

3

5) Read command with 2 indexes : SET_ASPECT_RATIO_OUT

Read command to know how is displayed a signal plugged on the input 4: 3,so Answer: so3,2<CR><LF> which mean that the input 4 is displayed cropped

A4: Error codes

Answer: E10<CR><LF> which mean invalid command Answer: E11<CR><LF> which mean index value error (index value out of range) Answer: E12<CR><LF> which mean index number error (too or few indexes)

Some commands are only available as [Read command], they are status and are colored in blue as this line. Some commands are colored in yellow as this line to indicate they were added or modified in this version.

A5 COMMUNICATION PORTS

4

Read /

Min

Max

Default

Apply factory settings to the

Auto reset

1, …, 100 = Brightness level,

Enable/Disable the mirror mode

and position

2 = Background Layer

Group Name CmdResp Description

DIESE # #

SYSTEM

CONTROLS

5

READY * * Ready Device Flag Rd 0 1 0 DEV ? DEV MMS device type Rd 85 85 85 85 = EKS-500

UPDATER yU yU Device reboot for update Rd/Wr 0 255 0 1 then 254 => Reboot FACTORYRESET YR YR POSMEMORYRESET YE YE Erase stored image settings Rd/Wr 0 1 0 CSTORE YS YS

LOCK YK YK Device locking Rd/Wr 0 2 0

LCDBRIGHTNESS YB YB Front panel display brightness Rd/Wr 1 8 8 KEYBRIGHTNESS Yb Yb Front panel keys brightness Rd/Wr 10 100 100

TBAR_ENABLE YD YD Enable disable T-BAR Rd/Wr 0 1 1

COPKIND CK CK

COPPROGRESS CP CP

PRESET_MATRIX_MGMT CR CR

SWITCHER_MODE CM CM Device operating mode Rd/Wr 0 2 0

MATRIX_MIRROR Cm Cm

Request the retrieval of all the variables

device( except image settings ) FLASH memory writing in

progess. Do not power off

Kind of slow in-progress operation

Progress percent of the slow operation

Preset management in matrix mode from the front panel

in matrix mode

Write

Value

value

Rd/Wr 0 1 0

Rd 0 1 0

Rd 0 6 0

Rd 0 100 0 Percent : 0 to 100%

Rd/Wr 0 3 0

Values Index #1 Index #2

0= Initialization in progress 1 = Ready

0 = Free 1 = Flash writing in progress 0 = No lock 1 = Locked menu 2 = Locked front panel 1, …, 8 = Brightness level, 12,5% step

1% step 0 = None

1 = Auto centering 2 = Auto setting 3 = StandBy 4 = Picture recording 5 = Reset to default factory setting 6 = Reset User settings

0 = Preset management for both outputs 1 = Preset management for current output 2 = Preset management for output 1 3 = Preset management for output 2 0 = Seamless switcher mode 1 = Matrix mode 2 = Quadravision mode 0 = No copy 1 = Full copy 2 = Source copy H Flip 3 = Source copy, data and position H Flip

0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode

Read /

Min

Max

Default

AXION

AUTO_LOCK

less

AUTO_TAKE

Automatic Take after an input

AUTO_STEPBACK

Automatic preset toggle after a

ELEMENT TRANSITION of the

Group Name CmdResp Description

yA yA Device is driven by Orchestra Rd/Wr 0 1 0

YL YL

YT YT

Ys Ys

FREEZE_MODE Ym Ym Input freeze mode Rd/Wr 0 1 0

PROG_KEY_ET YM YM

PROG_KEY_TW YN YN

Forbide the use of a signalinput

change

TAKE

effect programmable keys

TRANSITION WAY of the effect programmable keys

Write

Value

value

Rd/Wr 0 1 1

Rd/Wr 0 1 0

Rd/Wr 0 6 2

Rd/Wr 0 10 0

value

Values Index #1 Index #2

for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1

0 = Device is not driven by ORC-50 1 = Device is driven by Orc50 0 = Signal less input can be selected 1 = Signal less input can not be selected 0 = AUTO-TAKE Disable 1 = AUTO-TAKE Enable 0 = AUTO- PRESETTOGGLE Disable 1 = AUTO- PRESETTOGGLE Enable 0 = Freeze by input 1 = Freeze all inputs 0 = Cut 1 = CleanCut 2 = Fade 3 = Slide (associée à 1 trajectoire) 4 = Wipe (associée à 1 trajectoire) 5 = Cercle (associée à 1 trajectoire) 6 = Stretch (associée à 1 trajectoire) 0 = Left to right 1 = Right to left

9 = Audio Output 2

0 = Fade programmable key 1 = User 1 programmable key 2 = User 2 programmable key

0 = Fade programmable key

6

Read /

Min

Max

Default

wS wS

wQ wQ

wN wN

wF wF

wR wR

Group Name CmdResp Description

Duration of the effect associated to the effect programmable keys

Back-up input when an input loose its signal

Disable the the black fiilng of the bakgrounfd live layer

Fill PIP with black depending on the aspect ratio Disable Frame and Ids on the preview output

Standby mode Rd/Wr 0 1 0

Request for standby or wake up Message to wake-up an output display device ( 50 characters) Message to send an output display device to sleep ( 50 characters) Output display device UART speed

STANDBY

PROG_KEY_ED YO YO

FRAME_ALERT Yf Yf

TRANSPARENT_BACKGROUND Yt Yt

BLACK_FILL bF bF DISABLE_ID bI bI STDBYSTATUS STDBYREQUEST STDBYPROJ_ON

STDBYPROJ_OFF

STDBYPROJ_RATE

Write

Value

value

Rd/Wr 0 255 10 Unit = 1/10s

Rd/Wr 0 14 0

Rd/Wr 0 1 1

Rd/Wr 0 1 0 Rd/Wr 0 1 0

Rd/Wr 0 1 0 Rd/Wr 0 255 0 min = 0 max = 49

Rd/Wr 0 255 0 min = 0 max = 49

Rd/Wr 0 3 2

Values Index #1 Index #2

2 = Bottom to top 3 = Top to bottom 4 = Vertical from/to center 5 = Horizontal from/to center 6 = H&V rom/to center 7 = From SW to NE 8 = From SE to NW 9 = From NW to SE 10 = From NE to SW

0 = No input 1 = Input1 2 = Input2 3 = Input3 4 = Input4 5 = Input5 6 = Input6 9 = Input9 10 = Input10 11 = Input11 12 = Input12 13 = Input13 14 = Input14 0 = use BLACK_FILL 1 = Disable black filling only for background 0 = Disable black filling 1 = Enable black filling

0 = Normal mode 1 = Standby mode 0 = Wake up 1 = Standby

0 = 1200bauds 1 = 2400bauds

1 = User 1 programmable key 2 = User 2 programmable key

0 = Fade programmable key 1 = User 1 programmable key 2 = User 2 programmable key

7

Read /

Min

Max

Default

wC wC

bit 6 = SDI In 2 board (SDI 3

Auto

Group Name CmdResp Description

VERSION

STDBYPROJ_CTRL

VERI1 xi xi Byte 0 and 1 of the device ID Rd 0 65535 0 ex : AAAA VERI2 xj xj Byte 2 and 3 of the device ID Rd 0 65535 0 ex : AAAA VERI3 xk xk Byte 4 and 5 of the device ID Rd 0 65535 0 ex : AAAA VERI4 xl xl Byte 6 and 7 of the device ID Rd 0 65535 0 ex : AAAA

VERK xK xK

VERV xV xV Variable set version Rd 0 65535 42 VERUPD xU xU Updater version Rd 0 65535 0

OPT yo yo Detected options Rd 0 65535 0

Rd/Wr 0 4 0

Checksum/version of the programmable components

Write

Value

value

Rd/Wr 0 65535 0

Values Index #1 Index #2

2 = 9600bauds 3 = 19200bauds 0 = No request 1 = Wake up request 2 = Standby request 3 = Clear Wake up message 4 = Clear standby message

bit 0 = Lan Module bit 1 = SDI In 1 board (SDI 1 and 2) bit 2 = Recording board bit 3 = CF Caecina bit 4 = CF Fannia bit 5 = CF Thrasea

0 = Number of programmables components 1 = Main microcontroler 2 = Front panel microcontroler 3 = FPGA Caecina 4 = FPGA Fannia 5 = FPGA Thrasea 6 = Synchro CPLD

INPUT

8

and 4) bit 7 = Audio Evolution bit 8 = HDCP DVI In

REV xR xR Moher board revision Rd 0 255 0 IN_AUTOSET_ALL Ia Ia

IN_AUTOSET Ii Ii

-setting request for all the

inputs

-setting request for the

specified input

Rd/Wr 0 1 0

Evolution

0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9

Read /

Min

Max

Default

Group Name CmdResp Description

IN_USR_FORMAT iU iU

9

Format/standard of the input signal corrected by user

Write

Value

value

Rd/Wr 0 42 0

value

Values Index #1 Index #2

9 = Input10 10 = Input11 11 = Input12 12 = Input13

0 = None 1 = Invalid 2 = Unknown 3 = SDTV NTSC 4 = SDTV PAL 5 = SDTV SECAM 6 = SDTV BW 7 = SDTV 480i 8 = SDTV 576i 9 = EDTV 480p 10 = EDTV 576p 11 = HDTV 720p 12 = HDTV 1035i 13 = HDTV 1080i 14 = HDTV 1080p 15 = HDTV 1080sF 16 = CPU VGA 17 = CPU 800x480 18 = CPU WVGA 19 = CPU SVGA 20 = CPU 1280x600 21 = CPU 720p RGB 22 = CPU XGA 23 = CPU WXGA 24 = CPU SWXGA 25 = CPU 800p RGB 26 = CPU SWXGA+ 27 = CPU 1152x864 28 = CPU 900p RGB 29 = CPU 1600x900 30 = CPU 960p RGB 31 = CPU SXGA 32 = CPU 1360x1024 33 = CPU DILA4/3 34 = CPU SXGA+ 35 = CPU WSXGA+ 36 = CPU 1080p RGB 37 = CPU 2K 38 = CPU UXGA 39 = CPU WUXGA 40 = CPU 1920x1440 41 = CPU QXGA

13 = Input14

0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14

Read /

Min

Max

Default

3 = SDTV/EDTV/HDTV RGB

D EDTV/HDTV RGB

Analog H sync load

Group Name CmdResp Description

IN_TYPE iK iK Input signal type Rd/Wr 0 17 13

IN_SYNC_LOAD il il

IN_USED iu iu Input is enabled Rd/Wr 0 1 1

10

Rd/Wr 0 1 0

Write

Value

value

Values Index #1 Index #2

42 = CPU 1366x768 0 = SDTV Composite 1 = SDTV Y/C 2 = SDTV/EDTV/HDTV RGBS TTL/Analog

SOG 4 = SDTV/EDTV/HDTV YUV 5 = Computer SOG 6 = Computer H&V or Composite (TTL/Analog) 7 = Computer B&W 8 = DVI16-235 9 = DVI-D EDTV/HDTV YUV 10 = DVI-D Computer RGB 0-255 11 = DVI-D Computer RGB 16-235 12 = SDI SDTV/HDTV 13 = Analog Computer, separated H&V synchro 14 = Analog Computer, composite TTL synchro 15 = Analog Computer, composite analog synchro 16 = Analog RGB video, composite TTL synchro 17 = Analog RGB video, composite analog synchro

0 = Hi-Z 1 = 75 ohm loaded

0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14

0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5

Read /

Min

Max

Default

Group Name CmdResp Description

IN_SD_STD iS iS Decoded video standard Rd/Wr 0 7 0

IN_SD_STA iV iV Video Signal stability Rd/Wr 0 1 1

IN_SYNCHRONIZED iY iY VIS Synchronisation group Rd/Wr 0 3 0

IN_HDCP_ENABLE iH iH IN_HDCP_CABLE_LEN iC iC Lenght of an DVI input cable Rd/Wr 0 2 0 0 = Less than 10 meter 10 = Input11

Enable/disable the HDCP support of a DVI input

Write

Value

value

Rd/Wr 0 1 1

Values Index #1 Index #2

5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1

0 = Auto 1 = NTSC (M,J) 2 = PAL (BDGHIN) 3 = PAL (M) 4 = PAL (N-Combination) 5 = NTSC 4.43 6 = SECAM 7 = PAL 60

0 = Stable Source ( DVD ) 1 = VCR Source ( Video cassette recorder )

0 = Does not belong to any VIS Group 1 = Groupe VIS 1 group for analog input 2 = Groupe VIS 2 group for analog input 3 = Groupe VIS 3 group for analog input

1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 10 = Input11 11 = Input12

11

Read /

Min

Max

Default

Group Name CmdResp Description

IN_KEYING_TYPE KT KT Keying type Rd/Wr 0 4 0

IN_KEYING_R_LEVEL KR KR Keying level (Red ) Rd/Wr 0 255 0

KEYING

IN_KEYING_G_LEVEL KG KG Keying level (Green) Rd/Wr 0 255 255

IN_KEYING_B_LEVEL KB KB Keying level (Bule) Rd/Wr 0 255 0

Write

Value

value

Values Index #1 Index #2

cable length 1 = 5 to 20 meters cable length 2 = More than 15 meters cable length

0 = No keying 1 = Luma Key Keying 2 = ChromaKey Keying 3 = Luma Key Keying + DSK 4 = ChromaKey Keying + DSK

11 = Input12

0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5

12

Read /

Min

Max

Default

Group Name CmdResp Description

IN_KEYING_TOLER KH KH

IN_KEYING_LUMA_LOW_LEVEL KL KL Minimum luma level Rd/Wr 0 255 0

IN_KEYING_LUMA_HIGH_LEVEL KM KM Maximum luma level Rd/Wr 0 255 255

IN_KEYING_DSK_ALPHA KA KA Brightness of DSK background Rd/Wr 0 255 64

Keying Tolerance (for chroma and luma key)

Write

Value

value

Rd/Wr 0 255 10

Values Index #1 Index #2

5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3

13

Read /

Min

Max

Default

Enable/disable the keying color

Auto reset

Group Name CmdResp Description

IN_KEYING_INVERT KI KI Invert keying area Rd/Wr 0 1 0

IN_KEYING_GRAB_ENABLE Kg Kg

IN_KEYING_GRAB_GET Kc Kc

IN_KEYING_GRAB_H Kh Kh IN_KEYING_GRAB_V Kv Kv Vertical position of the grabber Rd/Wr 0 65535 32768

SIG_HPOL sh sh Input H sync polarity Rd 0 1 0

INPUT STATUS

SIG_VPOL sv sv Input V sync polarity Rd 0 1 0

grabber mode Capture the coolor selected by the grabber and apply the settings Horizontal position of the grabber

Write

Value

value

Rd/Wr 0 1 0

Rd/Wr 0 65535 32768

Values Index #1 Index #2

3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5

0 = Disable the grabber 1 = Enable the grabber

Percent of OSCREEN_UTIL_H

Precent of OSCREEN_UTIL_V

0 = Negative Synchro 1 = Positive Synchro

5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14

0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5

14

Read /

Min

Max

Default

Group Name CmdResp Description

SIG_SYNC_TYPE sK sK Input sync type Rd 0 3 0

SIG_FREQ_FIELD sf sf Input frame frequency Rd 0 65535 0 Unit = 1/100Hz

SIG_FREQ_LINE sl sl Input line frequency Rd 0 65535 0 Unit = 1/100Hz

SIG_COMPLETE sc sc Input scan completed Rd 0 1 0

Write

Value

value

Values Index #1 Index #2

5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2

0 = Séparated Synchros H&V 1 = Composite TTL Synchro 2 = Composite Analog Synchro 3 = Synchro on Green (SOG)

0 = scan in progress or failed 1 = scan completed

2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3

15

Read /

Min

Max

Default

Group Name CmdResp Description

SIG_DETECTED_FORMAT sD sD Input detected format name Rd 0 42 0

16

Write

Value

value

Values Index #1 Index #2

3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13

0 = None 1 = Invalid 2 = Unknown 3 = SDTV NTSC 4 = SDTV PAL 5 = SDTV SECAM 6 = SDTV BW 7 = SDTV 480i 8 = SDTV 576i 9 = EDTV 480p 10 = EDTV 576p 11 = HDTV 720p 12 = HDTV 1035i 13 = HDTV 1080i 14 = HDTV 1080p 15 = HDTV 1080sF 16 = CPU VGA 17 = CPU 800x480 18 = CPU WVGA 19 = CPU SVGA 20 = CPU 1280x600 21 = CPU 720p RGB 22 = CPU XGA 23 = CPU WXGA 24 = CPU SWXGA 25 = CPU 800p RGB 26 = CPU SWXGA+ 27 = CPU 1152x864 28 = CPU 900p RGB 29 = CPU 1600x900 30 = CPU 960p RGB 31 = CPU SXGA 32 = CPU 1360x1024 33 = CPU DILA4/3 34 = CPU SXGA+ 35 = CPU WSXGA+ 36 = CPU 1080p RGB 37 = CPU 2K

13 = Input14

0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14

Read /

Min

Max

Default

Group Name CmdResp Description

SIG_CURRENT_FORMAT sF sF Input current format name Rd 0 42 0

17

Write

Value

value

Values Index #1 Index #2

38 = CPU UXGA 39 = CPU WUXGA 40 = CPU 1920x1440 41 = CPU QXGA 42 = CPU 1366x768 0 = None 1 = Invalid 2 = Unknown 3 = SDTV NTSC 4 = SDTV PAL 5 = SDTV SECAM 6 = SDTV BW 7 = SDTV 480i 8 = SDTV 576i 9 = EDTV 480p 10 = EDTV 576p 11 = HDTV 720p 12 = HDTV 1035i 13 = HDTV 1080i 14 = HDTV 1080p 15 = HDTV 1080sF 16 = CPU VGA 17 = CPU 800x480 18 = CPU WVGA 19 = CPU SVGA 20 = CPU 1280x600 21 = CPU 720p RGB 22 = CPU XGA 23 = CPU WXGA 24 = CPU SWXGA 25 = CPU 800p RGB 26 = CPU SWXGA+ 27 = CPU 1152x864 28 = CPU 900p RGB 29 = CPU 1600x900 30 = CPU 960p RGB 31 = CPU SXGA 32 = CPU 1360x1024 33 = CPU DILA4/3 34 = CPU SXGA+ 35 = CPU WSXGA+ 36 = CPU 1080p RGB 37 = CPU 2K 38 = CPU UXGA 39 = CPU WUXGA 40 = CPU 1920x1440 41 = CPU QXGA

0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14

Read /

Min

Max

Default

Group Name CmdResp Description

SIG_FORMAT_LIST sL sL

SIG_SCANTYPE ss ss Input scan type Rd 0 3 0

SIG_HTOTAL_THEORIC sH sH Total number of pixels per line Rd 0 65535 0 Unit = pixels

SIG_HTOTAL_MAXI sM sM

Bit field of the fomats compatible with the detected format

Maximal number of pixels per input line

Write

Value

value

Rd 0 255 0

Rd 0 65535 0 Unit = pixels

Values Index #1 Index #2

42 = CPU 1366x768

0 = Progressive 1 = Interleaved, Top field first 2 = Interleaved, Bottom field first 3 = Segmented frame

0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11

0 = Bits 0 to 7 Slice 1 = Bits 8 to 15 Slice 2 = Bits 16 to 23 Slice 3 = Bits 24 to 31 Slice 4 = Bits 32 to 39 Slice 5 = Bits 40 to 47 Slice

18

Read /

Min

Max

Default

Group Name CmdResp Description

SIG_WIDTH sw sw Input displayed pixel count Rd 0 65535 0 Unit = pixels

SIG_HEIGHT st st Input displayed line count Rd 0 65535 0 Unit = pixels

SIG_HDCP sn sn Input HDCP status Rd 0 1 0

SIG_MEM_SLOT sS sS Memory slot index Rd 0 255 255

Write

Value

value

Values Index #1 Index #2

11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9

19

Read /

Min

Max

Default

Group Name CmdResp Description

SET_HPOS SH SH Input horizontal position Rd/Wr 0 2048 1024 1024 = neutral

SET_VPOS SV SV Input vertical position Rd/Wr 0 2048 1024 1024 = neutral

INPUT SETTINGS

SET_HSIZE Sw Sw Input horizontal size Rd/Wr 0 4096 2048 2048 = neutral

SET_VSIZE Sh Sh Input vertical size Rd/Wr 0 4096 2048 2048 = neutral

Write

Value

value

Values Index #1 Index #2

9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5

20

Read /

Min

Max

Default

Group Name CmdResp Description

SET_BRIGHTNESS Sg Sg Input brightness Rd/Wr 0 255 128 128 = neutral

SET_CONTRAST Sc Sc Input Contrast Rd/Wr 0 255 128 128 = neutral

SET_COLOR Sr Sr Input color level Rd/Wr 0 255 128 128 = neutral

SET_HUE Su Su Input hue (NTSC only) Rd/Wr 0 255 128 128 = neutral

Write

Value

value

Values Index #1 Index #2

5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3

21

Read /

Min

Max

Default

Auto reset

ADC R channel adjustment

Group Name CmdResp Description

SET_HTOTAL ST ST Input total pixel per line Rd/Wr 0 65535 0 Unit = pixels.

SET_PHASE SS SS Input Phase Rd/Wr 0 31 16

SET_AUTOCAD Sa Sa Input autocentering reques Rd/Wr 0 1 0

SET_USER_GAIN_R sr sr

Write

Value

value

Rd/Wr 0 255 128 128 = neutral 0 = Input1

Values Index #1 Index #2

3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14

22

Read /

Min

Max

Default

ADC G channel adjustment

ADC B channel adjustment

Group Name CmdResp Description

(advanced setting) 1 = Input2

SET_USER_GAIN_G sg sg

SET_USER_GAIN_B sb sb

SET_PULLDOWN_2_2 Sn Sn

23

(advanced setting)

Enable/disable the auto 2:2 pulldown

Write

Value

value

Rd/Wr 0 255 128 128 = neutral

Rd/Wr 0 1 1

Values Index #1 Index #2

2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5

0 = Disable automatic detection 1 = Enable automatic detection

5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14

Read /

Min

Max

Default

Percent = 65535 = 100% : all

all

Group Name CmdResp Description

SET_PULLDOWN_3_2 Sp Sp

SET_CROP_WIN_POS_H SI SI

SET_CROP_WIN_POS_V SJ SJ

SET_CROP_WIN_SIZE_H SK SK Horizontal cropping Rd/Wr 0 58981 0 Percent = 65535 = 100%

24

Enable/disable the auto 3:2 pulldown

Cropping window horizontal position

Cropping window vertical position

Write

Value

value

Rd/Wr 0 1 1

Rd/Wr 0 65535 32768

Values Index #1 Index #2

0 = Input1 1 = Input2 2 = Input3

0 = Disable automatic detection 1 = Enable automatic detection

cropping on the left

Percent = 65535 = 100% : cropping on the top

3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13

Read /

Min

Max

Default

without black stripes

Group Name CmdResp Description

SET_CROP_WIN_SIZE_V SL SL Vertical cropping Rd/Wr 0 58981 0 Percent = 65535 = 100%

SET_ASPECT_RATIO_IN si si Input image aspect ratio Rd/Wr 0 4 0

SET_ASPECT_RATIO_OUT so so Output image aspect ratio Rd/Wr 0 3 1

SET_OVER_SCAN sO sO

input image Overscan/Underscan

Write

Value

value

Rd/Wr 0 1 1

Values Index #1 Index #2

13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5

0 = 4/3 Fullscreen 1 = 4/3 with 16/9 content + black stripes 2 = 4/3 with 2.35 content + black stripes 3 = 4/3 with 16/9 content

4 = 19/9 with 4/3 content + black stripes

0 = Distorted, input aspect ratio not preserved 1 = Not distorted, black bands added 2 = Not distorted, no black bands added 3 = Not distorted and no scaling

5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11

25

Read /

Min

Max

Default

Group Name CmdResp Description

SET_FORCE_4_3 SF SF

SET_RESET_SETTINGS Ss Ss Current input default settings Rd/Wr 0 1 0

SET_FREEZE Sf Sf Freeze of the input Rd/Wr 0 1 0 1 = Freeze

SET_MOTION_DETECT Sm Sm

Force the aspect ratio of PAL/NTSC input to 4/3

0 : max correction; 15 : min correction

Write

Value

value

Rd/Wr 0 1 1 1 = forced

Rd/Wr 0 15 15

Values Index #1 Index #2

11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14 0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9

26

Read /

Min

Max

Default

Group Name CmdResp Description

PE_INPUTNUM IN IN

PRESET ELEMENT

PE_SOURCENUM IS IS Source number Rd/Wr 0 64 0 Same Orc-50

27

Displayed input number or frame or logo number

Write

Value

value

Rd/Wr 0 14 0

value

Values Index #1 Index #2

9 = Input10 10 = Input11 11 = Input12 12 = Input13

0 = No input 1 = Input1 2 = Input2 3 = Input3 4 = Input4 5 = Input5 6 = Input6 9 = Input9 10 = Input10 11 = Input11 12 = Input12 13 = Input13 14 = Input14

13 = Input14

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for

Read /

Min

Max

Default

Aa Aa Auxiliary input mixing enable

Group Name CmdResp Description

PE_AUDIO_AUX_MUTE

PE_SMOOTH_MOVE ps ps « Smooth Move » activation Rd/Wr 0 1 1 1 = Enable.

28

Write

Value

value

Rd/Wr 0 1 0 1 = Enable.

Values Index #1 Index #2

output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode

Read /

Min

Max

Default

Group Name CmdResp Description

PE_FLIP pf pf Flip de la source Rd/Wr 0 3 0

PE_NEW_ID pN pN Unique layer identifier number Rd/Wr 0 1 0

29

Write

Value

value

Values Index #1 Index #2

Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in

0 = No flip 1 = Horizontal flip 2 = Vertical flip 3 = Both Horizontal and vertical flip

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

Read /

Min

Max

Default

Group Name CmdResp Description

PE_POS_H pH pH

PE_POS_V pV pV

30

Layer left H position on output screen

Layer top V position on output screen

Write

Value

value

Rd/Wr 0 65535 32768

Values Index #1 Index #2

quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for

Unit = pixels ( 32768 = screen left border )

Unit = pixels ( 32768 = screen top border )

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

Read /

Min

Max

Default

Group Name CmdResp Description

PE_SIZE_H pW pW

PE_SIZE_V pS pS

31

Layer H size on output screen (without borders)

Layer V size on output screen (without borders)

Write

Value

value

Rd/Wr 0 65535 1600

Rd/Wr 0 65535 1200

Values Index #1 Index #2

output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1

Unit = pixels ( Max=16x2048 = 32768)

Unit = pixels (Max=16x2048 = 32768)

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

Read /

Min

Max

Default

Group Name CmdResp Description

PE_CROP_WIN_POS_H CH CH

PE_CROP_WIN_POS_V CV CV

32

Cropping window horizontal position

Cropping window vertical position

Write

Value

value

Rd/Wr 0 65535 32768

Values Index #1 Index #2

5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for

Unit = percent ( 65535 = 100% = : all cropping on the left )

Unit = percent ( 65535 = 100% = : all cropping on the top )

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

Read /

Min

Max

Default

Group Name CmdResp Description

PE_CROP_WIN_SIZE_H CW CW Horizontal cropping Rd/Wr 0 58981 0 Percent = 65535 = 100%

PE_CROP_WIN_SIZE_V CS CS Vertical cropping Rd/Wr 0 58981 0 Percent = 65535 = 100%

33

Write

Value

value

Values Index #1 Index #2

output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode

Read /

Min

Max

Default

Group Name CmdResp Description

PE_ALPHA pA pA Layer transparency Rd/Wr 0 255 255

PE_BORDER_STYLE bS bS Border style Rd/Wr 0 3 0

34

Write

Value

value

Values Index #1 Index #2

4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in

0 = 100% = transparent 255 = 0% = visible

0 = No border 1 = Colored edge 3 = Shadow

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

Read /

Min

Max

Default

Group Name CmdResp Description

PE_BORDER_COLOR bC bC Border color Rd/Wr 0 544 33 Color number

PE_BORDER_ALPHA bA bA Border transparency Rd/Wr 0 255 255

35

Write

Value

value

Values Index #1 Index #2

matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer

0 = 100% = transparent 255 = 0% = visible

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7

Read /

Min

Max

Default

Group Name CmdResp Description

PE_BORDER_SIZE_H bH bH Border H size Rd/Wr 0 127 10 Unit = pixels

PE_BORDER_SIZE_V bV bV Border V size Rd/Wr 0 127 10 Unit = pixels

36

Write

Value

value

Values Index #1 Index #2

10 = Memory Preset 8 for output 2 in

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6

matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1

Read /

Min

Max

Default

Group Name CmdResp Description

PE_BORDER_SHADOW_POS bP bP Shadow position Rd/Wr 0 3 0

PE_OPENING_TRANSITION oT oT Layer opening transition type Rd/Wr 0 6 2

37

Write

Value

value

Values Index #1 Index #2

0 = SE = Bottom right 1 = SW = Bottom left 2 = NW = Top left 3 = NE = top right

0 = Cut 1 = CleanCut 2 = Fade 3 = Slide (associée à 1 trajectoire) 4 = Wipe (associée à 1 trajectoire) 5 = Cercle (associée à 1

9 = Memory Preset 7 10 = Memory Preset 8

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5

Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for

Read /

Min

Max

Default

Group Name CmdResp Description

PE_OPENING_TRANSITION_WAY oW oW

PE_OPENING_DURATION oD oD

38

Layer opening transition direction

Layer opening transition duration

Write

Value

value

Rd/Wr 0 10 0

Rd/Wr 0 255 10 Unit = 1/10s

Values Index #1 Index #2

trajectoire) 6 = Stretch (associée à 1 trajectoire)

0 = Left to right 1 = Right to left 2 = Bottom to top 3 = Top to bottom 4 = Vertical from/to center 5 = Horizontal from/to center 6 = H&V rom/to center 7 = From SW to NE 8 = From SE to NW 9 = From NW to SE 10 = From NE to SW

8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4

output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1

Read /

Min

Max

Default

Group Name CmdResp Description

PE_CLOSING_TRANSITION cT cT Layer closing transition type Rd/Wr 0 6 2

PE_CLOSING_TRANSITION_WAY cW cW

39

Layer closing transition direction

Write

Value

value

Rd/Wr 0 10 0

value

Values Index #1 Index #2

0 = Cut 1 = CleanCut 2 = Fade 3 = Slide (associée à 1 trajectoire) 4 = Wipe (associée à 1 trajectoire) 5 = Cercle (associée à 1 trajectoire) 6 = Stretch (associée à 1 trajectoire)

0 = Left to right 1 = Right to left 2 = Bottom to top 3 = Top to bottom 4 = Vertical from/to center 5 = Horizontal from/to center

7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3

3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background

Read /

Min

Max

Default

Available TAKE flag

Group Name CmdResp Description

Layer closing transition duration

TAKE, Next preset becomes Current

PRESET CONTROL

PE_CLOSING_DURATION cD cD

TAKE TK TK TAKEAVA TA TA

TAKEINFO TI TI TAKE information Rd 0 2 0 0 = 1 shot TAKE

Write

Value

value

Rd/Wr 0 255 10 Unit = 1/10s

Rd/Wr 0 1 0

Rd 0 1 1

Values Index #1 Index #2

6 = H&V rom/to center 7 = From SW to NE 8 = From SE to NW 9 = From NW to SE 10 = From NE to SW

6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8

Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2 0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1 5 = Pip 3 Layer for output1 in quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1 9 = Audio Output 2

40

Read /

Min

Max

Default

Auto reset

5 = Pip 3 Layer for output1 in

Group Name CmdResp Description

TBAR NT NT TBAR value Rd/Wr 0 10000 0 Unit = 0,01%

COPY_FROM Nf Nf Source for preset copy Rd/Wr 0 10 0

COPY_TO Nt Nt Destination for preset copy Rd/Wr 0 10 0

COPY_SPLIT Ns Ns Preset partial copy control Rd/Wr 0 2 0 COPY_CTRL Nc Nc Preset copy control Rd/Wr 0 1 0

PREVIEWED_LAYER NC NC

Previewed layed (layer that is visible on preview screen)

Write

Value

value

Rd/Wr 0 7 2

value

Values Index #1 Index #2

1 = 2 shot TAKE 2 = Sequenced TAKE

0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8 0 = Current preset 1 = Next preset 2 = Previous preset 3 = Memory Preset 1 4 = Memory Preset 2 5 = Memory Preset 3 6 = Memory Preset 4 7 = Memory Preset 5 8 = Memory Preset 6 9 = Memory Preset 7 10 = Memory Preset 8 0 = Full Preset copy 1 = Output1 preset copy 2 = Output2 preset copy

0 = Background Frame for output 1 1 = Background Frame for output 2 in matrix mode 2 = Background Layer for output 1 3 = Pip 1 Layer for output1 Background Layer for output 2 in matrix mode 4 = Pip 2 Layer for output1

41

quadravision mode Pip1 Layer for output 2 in matrix mode 6 = Logo 1 7 = Logo 2 8 = Audio Output 1

Read /

Min

Max

Default

Anti

Group Name CmdResp Description

PREVIEWED_MOSAIC NM NM Mosaic preview mode Rd/Wr 0 1 0 #LAYER PREVIEWED_REFRESH_ALL NA NA Refresh all inputs of the mosaic Rd/Wr 0 1 1

SET_QUAD_LAYOUT NQ NQ

SETTINGS R_FLICK Rf Rf

Quadravision Layout request (auto-reset)

-flicker level Rd/Wr 0 7 2 0 = No antif-flicker

Write

Value

value

Rd/Wr 0 25 0

value

Values Index #1 Index #2

9 = Audio Output 2

0 = No request 1 = Splitted in 4 equal parts 2 = Split 1 + 3 left 3 = Split 1 + 3 right 4 = Split 1+ 3 bottom 5 = Window 1 fullscreen 6 = Window 2 fullscreen 7 = Window 3 fullscreen 8 = Window 4 fullscreen 9 = 2 Horizontal Windows 10 = 2 Vertical Windows 11 = 3 Horizontal Windows 12 = 3 Vertical Windows 13 = Reset of layer properties 14 = Background Live + Top Left PiP 15 = Background Live + Top Right PiP 16 = Background Live + Bottom Left PiP 17 = Background Live + Bottom Right PiP 18 = Background Frame + 2 Left Right PiPs 19 = Background Frame + 2 Top Bottom PiPs 20 = Background Frame + 1 Right PiP + 2 Top Bottom PiPs 21 = Background Frame + 1 Left PiP + 2 Top Bottom PiPs 22 = Background Frame + 1Top PiP + 2 Left Right PiPs 23 = Background Frame + 1 Bottom PiP + 2 Left Right PiPs 24 = Background Frame + 3 horizontal PiPs 25 = Background Frame + 3 diagonal PiPs

0 = Main output 1 = Preview output

42

Read /

Min

Max

Default

Group Name CmdResp Description

R_GAMMA Rg Rg Gamma correction level Rd/Wr 5 40 10 Unit = 1/10

R_SHARPNESS Rs Rs Sharpness correction Level Rd/Wr 0 255 128 128 = neutral

OUTPUT OFORMAT OF OF Output format Rd/Wr 0 37 0

43

Write

Value

value

Values Index #1 Index #2

2 = Recording output 0 = Main output

0 = PAL 1 = NTSC 2 = 480p 3 = 576p 4 = SMPTE296M 5 = SMPTE260M 6 = SMPTE274M 7 = SMPTE274M 8 = SMPTE274M 9 = 640 x 480 4/3 10 = 848 x 480 16/9 11 = 800 x 600 4/3 12 = 1024 x 768 4/3 13 = 1360 x 768 16/9 14 = 1280 x 800 16/9 15 = 1280 x 1024 5/4 16 = 1400 x 1050 5/3 17 = 1680 x 1050 16/9 18 = 1600 x 1200 4/3 19 = 1920 x 1200 16/9 20 = 2048 x 1080 21 = 1280 x 720 16/9 22 = 1920 x 1080 16/9 23 = 1920 x 1080 16/9 (HD) 24 = 1920 x 1080 16/9 (SHARP) 25 = 1920 x 1080 16/9 (SHARP 2) 26 = 1440 x 900 16/10 27 = 1280 x 768 15/9 28 = 1366 x 800 15/9 29 = 1366 x 768 16/9 30 = Computer Custom 1 31 = Computer Custom 2 32 = Computer Custom 3 33 = Computer Custom 4 34 = Computer Custom 5 35 = Computer Custom 6 36 = Computer Custom 7 37 = Computer Custom 8

1 = Preview output 2 = Recording output 0 = Main output 1 = Preview output 2 = Recording output

0 = Main output 1 = Preview output 2 = Recording output

Read /

Min

Max

Default

Analog output type

Analog output sync polarity

1 = Synchros H négative et V

defined

Group Name CmdResp Description

ORATE OR OR Output rate Rd/Wr 0 12 8

OSIGTYPEANALOG OA OA

OSIGTYPEDIGITAL OD OD Digital output type Rd/Wr 0 2 0

OSYNCPOL OS OS

OBACKCOLORPREDEF OC OC

Output background precolor

Write

Value

value

Rd/Wr 0 3 0

Rd/Wr 0 32 0

value

Values Index #1 Index #2

0 = Custom Field Rate 1 = 23,97 Hz 2 = 24 Hz 3 = 25 Hz 4 = 29,97 Hz 5 = 30 Hz 6 = 50 Hz 7 = 59,94 Hz 8 = 60 Hz 9 = 72 Hz 10 = 75 Hz 11 = 85 Hz 12 = 100 Hz 0 = RGBs 1 = RGsB (SOG) 2 = RGB H&V 3 = YUV 0 = RGB 0-255 ( full scale ) 1 = RGB 16-235 ( reduced scale ) 2 = YUV 0 = negative H&V synchro

positive 2 = Synchros H positive et V négative 3 = Synchros H et V positives 0 = Black 1 = Navy blue 2 = Blue 3 = Green Blue 4 = Water Blue 5 = Turquoise blue 6 = Dark green 7 = Green 8 = Lime 9 = Light green 10 = Dark red 11 = Red 12 = Tomato red 13 = Bordeaux 14 = Brown 15 = Chocolate 16 = Orange 17 = Gold

0 = Main output 1 = Preview output 2 = Recording output

44

Read /

Min

Max

Default

Group Name CmdResp Description

OBACKCOLORHUE OG OG Output background hue Rd/Wr 0 240 160

OBACKCOLORSAT OJ OJ Output background saturation Rd/Wr 0 240 0

OBACKCOLORLUMA OI OI Output background brightness Rd/Wr 0 240 0

OPATTERN OP OP Output test pattern Rd/Wr 0 8 0

OBLACK OB OB Output black control Rd/Wr 0 1 0

OUTIL_H OH OH Output H size Rd 0 65535 1600 Unit = pixels

OUTIL_V OV OV Output V size Rd 0 65535 1200 Unit = pixels

OFIELDRATE OT OT Output frame frequency Rd 100 10000 6000 Unit = 1/100Hz OIMAGE_OVERSCAN OO OO Image Overscan / Underscan Rd/Wr 0 1 0 0 = Main output

Write

Value

value

Values Index #1 Index #2

18 = Yellow 19 = Indigo blue 20 = Purple 21 = Light red 22 = Fuchsia 23 = Salmon 24 = Rose 25 = Olive reen 26 = Grey 27 = Silver 28 = Lavender blue 29 = Beige 30 = Azur 31 = White 32 = Custom

0 = No pattern 1 = Vertical Grey Scale 2 = Horizontal Grey Scale 3 = Vertical Color Bar 4 = Horizontal Color Bar 5 = Grid 6 = SMPTE 7 = Burst 8 = Centering

0 = Normal output 1 = Black output

0 = Main output 1 = Preview output 2 = Recording output 0 = Main output 1 = Preview output 2 = Recording output 0 = Main output 1 = Preview output 2 = Recording output

0 = Main output 1 = Preview output 2 = Recording output

0 = Main output 1 = Preview output 2 = Recording output 0 = Main output 1 = Preview output 2 = Recording output 0 = Main output 1 = Preview output 2 = Recording output 0 = Main output 1 = Preview output 2 = Recording output

45

Read /

Min

Max

Default

Xr Xr

Framelock source requested by

Xe Xe

Group Name CmdResp Description

OSETDETECTHDCP Oh Oh

OISHDCP On On Output HDCP status Rd 0 1 0

OSYNCOUTPUT Om Om

REFREQUEST

REFERENCE

REFCURRENTREQUEST

Enable/disable the Output HDCP detection

Output 2 copies the format and rate of output 1

user

Current Frame Lock source Rd/Wr 0 16 0

Write

Value

value

Rd/Wr 0 4 1

Rd/Wr 0 1 0

Rd/Wr 0 16 0

Values Index #1 Index #2

1 = Preview output

0 = Disable HDCP detection 1 = Automatic HDCP detection 2 = HDCP Configuration 1 3 = HDCP Configuration 2 4 = HDCP Configuration 3

0 = Analog input 1 as reference 1 = Analog input 2 as reference 2 = Analog input 3 as reference 3 = Analog input 4 as reference 4 = Analog input 5 as reference 5 = Analog input 6 as reference 8 = DVI 1 input as reference 9 = DVI 2 input as reference 10 = SDI 1 input as reference 11 = SDI 2 input as reference 12 = SDI 3 input as reference 13 = SDI 4 input as reference 14 = Back End 1 as reference 15 = Back End 2 as reference 16 = Back End 3 as reference 0 = Analog input 1 as reference 1 = Analog input 2 as reference 2 = Analog input 3 as

2 = Recording output

0 = Main output 1 = Preview output 2 = Recording output

46

Read /

Min

Max

Default

Xm Xm

Xc Xc

Xt Xt

Xl Xl

Group Name CmdResp Description

LOGOS FRAMES

REFMODE

REFCURRENTMODE

REFFREQ

REFLOCKSTATUS

PMODE PM PM Picture mode Rd/Wr 0 5 0

Follow mode requested by user Rd/Wr 0 5 0

Current follow mode Rd/Wr 0 5 0

Frame rate of the reference signal

Framelock locked status Rd 0 1 0 1 = locked

Write

Value

value

Rd 0 65535 0 Unit = 1/100Hz

Values Index #1 Index #2

reference 3 = Analog input 4 as reference 4 = Analog input 5 as reference 5 = Analog input 6 as reference 8 = DVI 1 input as reference 9 = DVI 2 input as reference 10 = SDI 1 input as reference 11 = SDI 2 input as reference 12 = SDI 3 input as reference 13 = SDI 4 input as reference 14 = Back End 1 as reference 15 = Back End 2 as reference 16 = Back End 3 as reference 0 = Internal 1 = Follow x1/2 2 = Follow x1 3 = Follow x2 4 = Follow x3 5 = Asynchronous Follow 0 = Internal 1 = Follow x1/2 2 = Follow x1 3 = Follow x2 4 = Follow x3 5 = Asynchronous Follow

0 = Normal mode 1 = Memory recall of logos and frames 2 = Logo recording mode 3 = Animated logo recording

0 = Main output 1 = Preview output 2 = Recording output

0 = Main output 1 = Preview output 2 = Recording output 0 = Main output 1 = Preview output 2 = Recording output

47

Read /

Min

Max

Default

Auto reset

compliant with current output

Group Name CmdResp Description

PEXECUTE PG PG Picture control Rd/Wr 0 1 0

PSTATUS PE PE Picture management status Rd 0 5 0

PFRAMES_VALID PF PF PLOGOS_VALID PZ PZ

PCAPTURE_ORIGIN PS PS PCAPTURE_LEFT PL PL Picture capture H position Rd/Wr 32768 65535 32768 Unit = pixels

PCAPTURE_TOP PT PT Picture capture V position Rd/Wr 32768 65535 32768 Unit = pixels PCAPTURE_WIDTH PW PW Picture capture H size Rd/Wr 0 32767 400 Unit = pixels PCAPTURE_HEIGHT PH PH Picture capture V size Rd/Wr 0 32767 300 Unit = pixels

PCAPTURE_KEYING_TYPE PB PB Picture Keying Type Rd/Wr 0 2 0

PCAPTURE_KEYING_R_LEVEL PC PC PCAPTURE_KEYING_G_LEVEL PD PD Picture Keying Level (Green) Rd/Wr 0 255 128

PCAPTURE_KEYING_B_LEVEL PJ PJ Picture Keying Level (Blue) Rd/Wr 0 255 128 PCAPTURE_KEYING_TOLER PK PK Keing Tolerance Rd/Wr 0 255 10 PCAPTURE_KEYING_LUMA_LOW_LEVEL PP PP Minimum Luma Level Rd/Wr 0 255 64 PCAPTURE_KEYING_LUMA_HIGH_LEVELPY PY Maximum Luma Level Rd/Wr 0 255 192 PCAPTURE_KEYING_INVERT PO PO Keying Invert Rd/Wr 0 1 0

PCAPTURE_KEYING_GRAB_ENABLE PQ PQ Keying Grabber Activate Rd/Wr 0 1 0 PCAPTURE_KEYING_GRAB_GET PR PR Keying update (capture and Rd/Wr 0 1 0 Percent of

48

Frames validity (bitfield : bit0 = Frame1) Logos validity (bitfield : bit0 = Logo1)

Select the output that will be used for capture

Picture Keying Level (Red or Tint)

Write

Value

value

Rd 0 255 0 Rd 0 511 0

Rd/Wr 0 1 0

Rd/Wr 0 255 128

Values Index #1 Index #2

mode 4 = Frame recording mode 5 = Deleting picture mode If PMODE = Savexxx => Store the PCAPTURE_INDEX image If PMODE = Erasexxx => Delete the PCAPTURE_INDEX image

0 = Free 1 = Recalling picture 2 = Storing picture 3 = Picture format not

format 4 = Deleting a picture 5 = Flash access error 0 = No image 1 = Image is valid 0 = No image 1 = Image is valid 0 = Main output 1 = Preview output 2 = Recording output

0 = No keying 1 = Luma Key Keying 2 = ChromaKey Keying 3 = Luma Key Keying + DSK 4 = ChromaKey Keying + DSK

0 = Disable the grabber 1 = Enable the grabber

Read /

Min

Max

Default

Auto reset

Group Name CmdResp Description

apply new value) OSCREEN_UTIL_H PCAPTURE_KEYING_GRAB_H PU PU Keying grabber position H Rd/Wr 0 65535 32768 PCAPTURE_KEYING_GRAB_V PV PV Keying grabber position V Rd/Wr 0 65535 32768

PCAPTURE_BACK_COLOR Pc Pc Cutout color for picture capture Rd/Wr 0 7 0 0 to 7 PCAPTURE_CAPTURE_TIME Pt Pt

PCAPTURE_MAX_FRAME Pm Pm PCAPTURE_FRAME_COUNT PN PN PCAPTURE_REFRESH_INTERVAL PI PI

PCAPTURE_INDEX PX PX ID of the picture to capture Rd/Wr 0 16 0

PSTATUS_WIDTH Pw Pw Picture H size Rd 0 32767 0

Capture time for an animated

logo

Maximal number of frames of

an animated logo

Number of frames of an

animated logo

Time between 2 frames of an

animated logo

Write

Value

value

Rd/Wr 0 100 0 Rd 1 255 80 1 à 255 Rd/Wr 1 255 1 Rd/Wr 1 10000 56 Unit = 1ms

Values Index #1 Index #2

Percent of OSCREEN_UTIL_V

0 = 0s 100 = 10s

0 = No Picture 1 = Logo 1 2 = Logo 2 3 = Logo 3 4 = Logo 4 5 = Logo 5 6 = Logo 6 7 = Logo 7 8 = Logo 8 9 = Frame 1 10 = Frame 2 11 = Frame 3 12 = Frame 4 13 = Frame 5 14 = Frame 6 15 = Frame 7 16 = Frame 8

1 = Logo 1 2 = Logo 2 3 = Logo 3 4 = Logo 4 5 = Logo 5 6 = Logo 6 7 = Logo 7 8 = Logo 8 9 = Frame 1 10 = Frame 2 11 = Frame 3 12 = Frame 4 13 = Frame 5 14 = Frame 6 15 = Frame 7 16 = Frame 8

49

Read /

Min

Max

Default

Group Name CmdResp Description

PSTATUS_HEIGHT Ph Ph Picture V size Rd 0 32767 0

PSTATUS_STYLE Ps Ps Logo style Rd 0 2 0

PSTATUS_FRAME_COUNT Pn Pn

50

Number of frames of an

animated logo

Write

Value

value

Rd 1 255 1

Values Index #1 Index #2

1 = Logo 1 2 = Logo 2 3 = Logo 3 4 = Logo 4 5 = Logo 5 6 = Logo 6 7 = Logo 7

0 = Normal logo 1 = Animated logo 2 = Frame

8 = Logo 8 9 = Frame 1 10 = Frame 2 11 = Frame 3 12 = Frame 4 13 = Frame 5 14 = Frame 6 15 = Frame 7 16 = Frame 8 1 = Logo 1 2 = Logo 2 3 = Logo 3 4 = Logo 4 5 = Logo 5 6 = Logo 6 7 = Logo 7 8 = Logo 8 9 = Frame 1 10 = Frame 2 11 = Frame 3 12 = Frame 4 13 = Frame 5 14 = Frame 6 15 = Frame 7 16 = Frame 8 1 = Logo 1 2 = Logo 2 3 = Logo 3 4 = Logo 4 5 = Logo 5 6 = Logo 6 7 = Logo 7 8 = Logo 8 9 = Frame 1 10 = Frame 2 11 = Frame 3 12 = Frame 4 13 = Frame 5 14 = Frame 6 15 = Frame 7

Read /

Min

Max

Default

Auto reset

Group Name CmdResp Description

PSTATUS_REFRESH_INTERVAL Pi Pi

LANENABLE ne ne LAN enable Rd/Wr 0 1 0

LANRESET nr nr LAN factory parameters reset Rd/Wr 0 1 0 LANSTORE ns ns LAN parameters update Rd/Wr 0 1 0

LANIP nw nw LAN devices addresses Rd/Wr 0 255 192 IP : 0 to 255

LAN

LANPORT np np LAN port numbers Rd/Wr 0 65535 10500

LANNETMASK nk nk LAN netmask Rd/Wr 0 24 8

LANPROTOCOL nt nt LAN protocol Rd/Wr 0 1 1

EDID EDID_FORMAT EF EF EDID preferred format Rd/Wr 0 21 0

Time between 2 frames of an

animated logo

Write

Value

value

Rd/Wr 1 10000 56 Unit = 1ms

value

Values Index #1 Index #2

16 = Frame 8 1 = Logo 1 2 = Logo 2 3 = Logo 3 4 = Logo 4 5 = Logo 5 6 = Logo 6 7 = Logo 7

0 = Enable RS232 ( disable LAN ) 1 = Enable LAN ( disable RS232 )

Local port : 10000 à 10999 Remote port : 0 à 65500

Number of 0bits from the right 0 = UDP Protocol 1 = TCP protocol 2 = AMX Protocol 0 = VGA 1 = 800x480 2 = WVGA 3 = SVGA 4 = 720pRGB 5 = XGA 6 = WXGA

8 = Logo 8 9 = Frame 1 10 = Frame 2 11 = Frame 3 12 = Frame 4 13 = Frame 5 14 = Frame 6 15 = Frame 7 16 = Frame 8

0 = Device 1 = Remote 2 = Gateway

0 = Analog input 1 1 = Analog input 2 3 = DVI-D input 1 4 = DVI-D input 2

0 = IP address high byte 1 = IP address mid high byte 2 = IP address mid low high byte 3 = IP address low byte

51

Read /

Min

Max

Default

AUDIO

AUDIO_INPUT_MODE

Af Af Audio mode

1 = Audio input follow the top

AUDIO_INPUT_MAP

Ai Ai Audio input map

AUD

AL AL Audio input level

Group Name CmdResp Description

EDID_RATE ER ER

EDID_REQUEST ES ES Request for an EDID Rd/Wr 0 2 0

IO_LEVEL

EDID preferred frame

frequency

Write

Value

value

Rd/Wr 0 5 0

Rd/Wr 0 1 1

Rd/Wr 0 14 1

Rd/Wr 0 255 45

value

Values Index #1 Index #2

7 = SWXGA 8 = 800pRGB 9 = 1152x864 10 = 900pRGB 11 = 1600x900 12 = 960pRGB 13 = SXGA 14 = 1360x1024 15 = SXGA+ 16 = WSXGA+ 17 = 1080pRGB 18 = 2K 19 = UXGA 20 = WUXGA 21 = Custom 0 = 50 Hz 1 = 60 Hz 2 = 72 Hz 3 = 75 Hz 4 = 85 Hz 5 = Custom

0 = EDID is ready 1 = EDID saving 2 = EDID reading

0 = Free choice of audio input

layers 0 = No input 1 = Input1 2 = Input2 3 = Input3 4 = Input4 5 = Input5 6 = Input6 9 = Input9 10 = Input10 11 = Input11 12 = Input12 13 = Input13 14 = Input14

Linear scale, init value is 0 dB

0 = Analog input 1 1 = Analog input 2 3 = DVI-D input 1 4 = DVI-D input 2

0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14

0 = Input1 1 = Input2 2 = Input3 3 = Input4

52

Read /

Min

Max

Default

AUDIO_AUX_LEVEL

Al Al Audio

AUDIO_BALANCE

Ab Ab Audio input balance

AUDIO_AUX_BALANCE

AB AB Audio auxiliary input balance

AUDIO_MUTE

Au Au Audio output Mute control

AUDIO_MASTER_VOLUME

AV AV

18dB , 255 =

AUDIO_MODE

Am Am Audio stero mode

AUDIO_DELAY

AD AD

AUDIO_AUTO_DELAY

Ae Ae Automatic audio delay

AUDIO_SDI_CHAN_LEFT

Ac Ac

Group Name CmdResp Description

Output Master volume Rd/Wr 0 255 255

Delay between audio and video Rd/Wr 0 80 0

auxiliary input level Rd/Wr 0 255 45

ID of the Sdi channel to

desembed for left channel

Write

Value

value

Rd/Wr 0 90 45

Rd/Wr 0 1 0 1 = Mute.

Rd/Wr 0 1 1

Rd/Wr 0 15 0

Values Index #1 Index #2

4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13

Linear scale, init value is 0 dB

0 = max to the left, 45 = centered, 90 = max to the right

0 = mute, 32 = 0dB 0 = mono 1 = Stereo 0 = no delay 500ms = max delay 0 = réglage manuel du Delay, 1 = reglage automatique du delay 0 = Group A – Channel 1 1 = Group A – Channel 2 2 = Group A – Channel 3 3 = Group A – Channel 4 4 = Group B – Channel 1 5 = Group B – Channel 2 6 = Group B – Channel 3 7 = Group B – Channel 4 8 = Group C – Channel 1 9 = Group C – Channel 2

13 = Input14

0 = Input1 1 = Input2 2 = Input3 3 = Input4 4 = Input5 5 = Input6 8 = Input9 9 = Input10 10 = Input11 11 = Input12 12 = Input13 13 = Input14

0 = Main output 1 = Preview output 0 = Main output 1 = Preview output 0 = Main output 1 = Preview output 0 = Main output 1 = Preview output

10 = Channel 11 – SDI 1 11 = Channel 11 – SDI 2 12 = Channel 11 – SDI 3 13 = Channel 12 – SDI 4

53

Read /

Min

Max

Default

AUDIO_SDI_CHAN_RIGHT

AC AC

AUDIO_DESEMBEND_LOCKED

As As

Group Name CmdResp Description

ID of the Sdi channel to

desembed for right channel

Information of audio channel

presence for SDI inputs

Enable OnScreen display on

the preview output

Maximum displayable fields

depending on the output

horizontal resolution

Bitfield indicating the displayed

fields

RECORDING

OSD

RECORDING_MODE Rm Rm Video Output display mode Rd/Wr 0 3 0 RECORDING_IMAGE_ADJUST_POS_H Rl Rl Horizontal position adjust Rd/Wr 0 255 128 128 = neutral

RECORDING_IMAGE_ADJUST_POS_V Rt Rt Vertical position adjust Rd/Wr 0 255 128 128 = neutral RECORDING_IMAGE_ADJUST_SIZE_H Rw Rw Width adjust Rd/Wr 0 255 128 128 = neutral RECORDING_IMAGE_ADJUST_SIZE_V Rh Rh Height adjust Rd/Wr 0 255 128 128 = neutral

OSD_ENABLE OE OE

OSD_NB_MAX_FIELDS ON ON

OSD_DISPLAYED_FIELDS OK OK

Write

Value

value

Rd/Wr 0 15 1

Rd 0 1 1 1 : Locked

Rd/Wr 0 1 0

Rd 0 255 0

Rd/Wr 1 65535 1

Values Index #1 Index #2

10 = Group C – Channel 3 11 = Group C – Channel 4 12 = Group D – Channel 1 13 = Group D – Channel 2 14 = Group D – Channel 3 15 = Group D – Channel 4 0 = Group A – Channel 1 1 = Group A – Channel 2 2 = Group A – Channel 3 3 = Group A – Channel 4 4 = Group B – Channel 1 5 = Group B – Channel 2 6 = Group B – Channel 3 7 = Group B – Channel 4 8 = Group C – Channel 1 9 = Group C – Channel 2 10 = Group C – Channel 3 11 = Group C – Channel 4 12 = Group D – Channel 1 13 = Group D – Channel 2 14 = Group D – Channel 3 15 = Group D – Channel 4

0 = Output 1 1 = Output 2 3 = Outputs 1 and 2 (T/B)

Bit 0 : Layer name Bit 1 : input linked to the layer Bit 2 : Transparency

10 = Channel 11 – SDI 1 11 = Channel 11 – SDI 2 12 = Channel 11 – SDI 3 13 = Channel 12 – SDI 4

54

Read /

Min

Max

Default

Group Name CmdResp Description

Write

Value

value

Values Index #1 Index #2

Bit 3 : Border style Bit 4 : Opening effect Bit 5 : Closing effect Bit 6: Smooth Move Bit 7 : Keying type

55

Analog Way EKS500 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual