PEX inlets/universal outlets for Cold Expansion PEX system
PEX inlets/universal outlets for Cold Expansion PEX system
UPGRADABLE
PRESSURE BALANCE BATH/SHOWER FITTING
VOLUME AND TEMPERATURE CONTROL VALVE
R120 Valve Body
Shown
Available Trim Kits
Colony® Soft
®
Copeland
Green Tea
®
Princeton
Moments
Town Square
®
®
®
Reliant® 3
Portsmouth
®
Studio
®
Seva
Ceramix
Quentin
H
™
GENERAL DESCRIPTION:
Cast brass body, washerless 47 mm ceramic disc valve
cartridge with volume and temperature control,
back-to-back capability, integrated check valves, and hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressure. One-half inch inlets
and outlets (choice of universal, direct sweat, threaded,
PEX or CPVC). Available with screwdriver stops. Rough-in
plaster guard designed for use as thin-wall mounting
adaptor. Valve body will accept a variety of decorative
Bath/Shower trim kits.
PRODUCT FEATURES:
Cast Brass Valve Body: Durable - Quality that will last
a lifetime. Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows easy control over both water
temperature and volume.
Pressure Balancing Valve Cartridge: Maintains
constant output temperature in response to changes in
relative hot and cold supply pressure. Diaphragm system
with integrated check valves engineered to eliminate cross
flow. Avoids failure due to mineral deposits - ideal for use in
hard water.
Back-to-Back Capability: Hot and cold can be
reversed quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount
of hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed to
protect valve during installation and serve as a mounting
plate for thin-wall installations. Two-piece design allows
valve to be tested prior to trim installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
MODEL NUMBER:
R121 Pressure Balance Rough Valve Body only
Universal inlets/outlets. LESS trim.
R121SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Universal inlets/outlets. Screwdriver stops. LESS trim.
R120 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
®
™
R120SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R125 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R125SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R127 Pressure Balance Rough Valve Body only
PEX inlets/universal outlets for Crimp Ring PEX system
(ASTM F1807). LESS trim.
R127SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/universal outlets for Crimp Ring PEX system
(ASTM F1807). Screwdriver stops. LESS trim.
R128 Pressure Balance Rough Valve Body only
(ASTM F1960). LESS trim.
R128SS Pressure Balance Rough Valve Body only
(ASTM F1960). Screwdriver stops. LESS trim.
R129 Pressure Balance Rough Valve Body only
CPVC inlets/universal outlets. LESS trim.
R129SS Pressure Balance Rough Valve Body only
CPVC inlets/universal outlets. Screwdriver stops. LESS trim.
See reverse side for dimensional valve drawings.
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature a cast brass valve body. Shall feature ceramic disc valve cartridge which allows user to control both
water temperature and volume. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid
failure due to mineral deposits. Shall also feature a hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard
Model # R12____, Trim Kit - American Standard Model # ____.____.
© 2015 AS America Inc.
B10
Revised 5/15
UPGRADABLE
PRESSURE BALANCE BATH/SHOWER FITTING
VOLUME AND TEMPERATURE CONTROL VALVE
1-5/8" TO 3-1/4"
(41 mm TO 83 mm)
FINISHED
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 65" (1651 mm)
AND 78" (1981 mm)
18"
(457 mm)
OPTIONAL
1-1/2" MIN.
(38 mm)
4" REF.
(102 mm)
COPPER
TOP OF TUB RIM
BOTTOM OF TUB
WALL
1/2"
1/2"
NPT
INLETS 1/2" NOM
COPPER SWEAT
or 1/2" NPT
OUTLETS
1/2" NOM.
COPPER SWEAT
or 1/2" NPT
SHR. 1/2" NOM.
COPPER SWEAT
INLETS 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
INLETS
3-3/8"
(86 mm)
3-3/8"
(86 mm)
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
PEX (R127) ASTM F1807
1/2" PEX
INLETS
(ASTM F1960)
OUTLETS
1/2" NOM.
COPPER SWEAT
or 1/2" NPT
PEX (R128) ASTM F1960
INLETS 1/2"
NOM. CPVC
OUTLETS
1/2" NOM.
COPPER SWEAT
or 1/2" NPT
VALVE BODY OPTIONS
4-1/16"
(103 mm)
UNIVERSAL (R121)
INLETS
4-1/16"
(103 mm
SWEAT (R120)
SHR
1/2" NPT
TUB PORT
1/2" NPT
THREADED (R125)
4-1/4"
(109 mm)
1/2" PEX INLETS
4-1/4"
(109 mm)
6-5/16
"
(160 mm)
CPVC (R129)
(103 mm)
MOUNTING
BRACKET
2-1/32"
(52 mm)
4-1/16"
(103 mm)
INLETS
1/2" NPT
2-1/32"
(52 mm)
(ASTM F1807)
2-1/32"
(52 mm)
MOUNTING
BRACKET
(103 mm)
MOUNTING
BRACKET
4-1/16"
4-1/16"
(103 mm)
4-1/16"
(103 mm)
4-1/16"
5-7/8"
INLETS 1/2" NOM
COPPER SWEAT
or 1/2" NPT
OUTLETS
1/2" NOM.
COPPER SWEAT
or 1/2" NPT
(149 mm)
UNIVERSAL (STOPS) (R121SS)
5-7/8"
(149 mm)
SHR. 1/2" NOM.
COPPER SWEAT
INLETS
1/2" NPT
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (STOPS) (R120SS)
5-7/8"
(149 mm)
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
INLETS 1/2" NPT
THREADED (STOPS) (R125SS)
6-1/2"
(165 mm)
SHR.
1/2" NOM.
COPPER
SWEAT
1/2" PEX INLETS
TUB 1/2" NOM.
COPPER SWEAT
(ASTM F1807)
PEX (STOPS) (R127SS) ASTM F1807
6-1/2"
(165 mm)
1/2" PEX
INLETS
(ASTM F1960)
OUTLETS
1/2" NOM.
COPPER SWEAT
or 1/2" NPT
PEX (STOPS) (R128SS) ASTM F1960
7-15/16"
(202 mm)
INLETS 1/2"
NOM. CPVC
OUTLETS
1/2" NOM.
COPPER SWEAT
or 1/2" NPT
CPVC (STOPS) (R129SS)
4-1/16"
(103 mm)
MOUNTING
BRACKET
2"
(51 mm)
4-1/16"
(103 mm)
4-1/16"
(103 mm)
2-1/32"
(52 mm)
(103 mm)
2-1/32"
(52 mm)
(103 mm)
MOUNTING
BRACKET
(103 mm)
MOUNTING
BRACKET
4-1/16"
4-1/16"
4-1/16"
© 2015 AS America Inc.
B11
Revised 5/15
Valve + Trim:
Trim Kit & Valve Body
Packaged Separately
To order: Specify valve body and
trim kit desired
Example: R120 - Direct Sweat Valve Body
T420.502 - Portsmouth Bath/
Shower Trim Kit
Universal
Outlets
VALVES
UPGRADABLE
PRESSURE BALANCE BATH/SHOWER FITTING
VOLUME AND TEMPERATURE CONTROL VALVE
R121
Inlets/
R121SS
Universal
Inlets/Outlets
w/ Screwdriver
Stops
R120
Diret Sweat
Inlets/
Outlets
R120SS
Diret Sweat
Inlets/Outlets
w/ Screwdriver
Stops
R125
Female
Thread
Inlets/
Outlets
R125SS
Female Thread
Inlets/Outlets
w/ Screwdriver
Stops
Colony
B/S
T675.502
Shower
T675.501
Valve
T675.500
TRIM KITS
B/S
Shower
Colony® Soft
T675.508
T675.507
Moments
®
Soft
®
Reliant® 3
T385.502
T385.501
T385.500
Reliant® 3
T385.508
T385.507
Princeton
T508.502
T508.501
T508.500
Princeton
T508.508
T508.507
®
®
Green Tea
Seva
T480.502
T480.501
T480.500
Seva
T480.508
T480.507
R127
PEX
Inlets/
Universal
Outlets
(ASTM F1807)
™
Copeland
T005.502
T005.501
T005.500
™
Copeland
T005.508
T005.507
®
Town Square
R127SS
PEX
Inlets/Universal
Outlets
w/ Screwdriver
Stops
(ASTM F1807)
®
Ceramix
T000.502
T000.501
T000.500
®
®
R128
PEX
Inlets/
Universal
Outlets
(ASTM F 1960)
®
R128SS
PEX
Inlets/Universal
Outlets
w/ Screwdriver
Stops
(ASTM F 1960)
8
6
4
2
GALLONS PER MINUTE
0
*Flow rates shown are for mixed hot and cold.
INLET PRESSURE (PSI)
R129
CPVC
Inlets/
Universal
Outlets
FLOW RATE*
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ANSI A 117.1
ASSE 1016
ASME A112.18.1
CSA B 125
®
Quentin
R129SS
CPVC
Inlets/Universal
Outlets
w/ Screwdriver
Stops
Spout
10080604020
B/S
T506.502
Shower
T506.501
Valve
T506.500
Moments
TRIM KITS
B/S
T506.508
Shower
T506.507
Valve
© 2015 AS America Inc.
®
Portsmouth
T420.508
T420.507
T420.500
H
C
OFF
T010.502
T010.501
T010.500
®
Portsmouth
C
H
T415.508
T415.507
T415.500
®
Green Tea
T010.508
T010.507
T555.522
T555.521
T555.520
®
Town Square
T555.528
T555.527
®
Studio
T590.508
T590.507
T590.500
T440.502
T440.501
T440.500
®
Quentin
T440.508
T440.507
®
B12
Revised 5/15
FOR VOLUME & TEMPERATURE CONTROL VALVES
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
TRIM KITS
Trim Kit Finishes
COLONY® SOFT
Model # / Description
T675.502 BATH/SHOWER Trim Kit
• Metal lever handle
• "Easy Clean" showerhead
.002
Polished Chrome
.295
Satin Nickel (PVD)
• Shower arm and flange
• Metal slip-on diverter tub spout
T675.501 SHOWER ONLY Trim Kit
• Metal lever handle
• "Easy Clean" showerhead
• Shower arm and flange
T675.500 VALVE ONLY Trim Kit
• Metal Lever handle
2.5 gpm/9.5 L/min. maximum
flow rate
.002
COLONY® SOFT
T675.508 BATH/SHOWER Trim Kit
• Metal lever handle
•
Water Saving FloWise®
showerhead
• Turbine spray - 1.5gpm max. flow
• Angle adjustable
• Showerhead, arm and flange
Metal slip-on diverter tub spout
•
Polished Chrome
Satin Nickel (PVD)
.295
T675.507 SHOWER ONLY Trim Kit
• Metal lever handle
•
Water Saving FloWise
showerhead
• Turbine spray - 1.5gpm max. flow
• Angle adjustable
• Showerhead, arm and flange
1.5 gpm/5.7 L/min. maximum
flow rate
®
RELIANT
3
T385.502 BATH/SHOWER Trim Kit
• Metal wall escutcheon
• Metal lever handle
• "Easy Clean" showerhead
• Shower arm and flange
.002
Polished Chrome
.295
Satin Nickel (PVD)
• Metal slip-on diverter tub spout
T385.501 SHOWER ONLY Trim Kit
• Metal wall escutcheon
• Metal lever handle
• "Easy Clean" showerhead
• Shower arm and flange
T385.500 VALVE ONLY Trim Kit
• Metal wall escutcheon
• Metal lever handle
2.5 gpm/9.5 L/min. maximum
flow rate
®
RELIANT
3
T385.522 BATH/SHOWER Trim Kit
• Large metal wall escutcheon
• Metal lever loop handle
• "Easy Clean" showerhead
• Shower arm and flange
.002
Polished Chrome
.295
Satin Nickel (PVD)
• Metal slip-on diverter tub spout
2.5 gpm/9.5 L/min. maximum
flow rate
Roughing-In Dimensions
1-5/8" TO 3-1/4"
(41 mm TO 83 mm.)
6"
(153 mm)
1/2" COPPER
TOP OF TUB RIM
1-5/8" TO 3-1/4"
(41 mm TO 83 mm)
6"
(153 mm)
1/2" COPPER
TOP OF TUB RIM
7-1/2"
(191 mm)
1/2" COPPER
9"
(228 mm)
1/2" COPPER
3" (76 mm)
(191 mm)
74" FOR HEAD
CLEARANCE
(1880 mm)
OPTIONAL
(102 mm)
74" FOR HEAD
CLEARANCE
(1880 mm)
(457 mm)
OPTIONAL
(102 mm)
4-1/4" REF.
(108 mm)
74" FOR HEAD
CLEARANCE
(1880 mm)
(457 mm)
OPTIONAL
(102 mm)
4-1/4" REF.
(108 mm)
74" FOR HEAD
CLEARANCE
(1880 mm)
(457 mm)
optional
(102 mm)
FINISHED WALL
4" REF.
(102 mm)
(178 mm)
18"
(457 mm)
1-1/2" REF.
(38 mm)
4" REF.
BOTTOM OF TUB
FINISHED WALL
4" REF.
(102 mm)
7" REF.
(178 mm)
18"
1-1/2" REF.
(38 mm)
4" REF.
BOTTOM OF TUB
1-5/8" TO 3-1/4"
(41 mm TO 83 mm)
FINISHED WALL
(152 mm)
18"
1-1/2"REF.
(38 mm)
4"
TOP OF TUB RIM
BOTTOM OF TUB
1-5/8" TO 3-1/4"
(41 mm TO 83 mm)
FINISHED WALL
18"
1-1/2" REF.
(38 mm)
4"
TOP OF TUB RIM
7" REF.
5-1/8" REF.
(130 mm)
5-1/8" REF.
(130 mm)
6" REF.
5-1/2" REF
(140 mm)
6" REF.
(152 mm)
5-1/2" REF
(140 mm)
BOTTOM OF TUB
3" (76 mm)
6-3/4"
(172 mm)
3" (76 mm)
6-3/4"
(172 mm)
7-1/2"
3" (76 mm)
13"
(330 mm)
© 2015 AS America Inc.
B13
Revised 5/15
FOR VOLUME & TEMPERATURE CONTROL VALVES
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
TRIM KITS
Trim Kit Roughing-In Dimensions
RELIANT
PRINCETON
PRINCETON
SEVA
Model # / Description
®
3
T385.508 BATH/SHOWER Trim Kit
• Metal wall escutcheon
• Metal lever handle
• Water Saving FloWise
showerhead
• Turbine Spray-1.5gpm max. flow
• Angle adjustable
• Shower arm and flange
• Metal slip-on diverter tub spout
T385.507 SHOWER ONLY Trim Kit
• Metal wall escutcheon
• Metal lever handle
• Water Saving FloWise
showerhead
• Turbine Spray-1.5gpm max. flow
• Angle adjustable
• Shower arm and flange
1.5 gpm/5.7 L/min. maximum
flow rate
®
T508.502 BATH/SHOWER Trim Kit
• Metal Lever Handle
• Wall escutcheon
• showerhead, arm and flange
• Metal slip-on diverter tub spout
T508.501 SHOWER ONLY Trim Kit
• Metal Lever Handle
• Wall escutcheon
• Showerhead, arm and flange
T508.500 VALVE ONLY Trim Kit
• Metal Lever Handle
• Wall escutcheon
2.5 gpm/9.5 L/min. maximum
flow rate
®
T508.508 BATH/SHOWER Trim Kit
• Metal Lever Handle
• Wall escutcheon
• Water Saving FloWise
s howerhead
• Shower arm and flange
• Metal slip-on diverter tub spout
T508.507 SHOWER ONLY Trim Kit
• Metal Lever Handle
• Wall escutcheon
• Water Saving FloWise
Showerhead
• Shower arm and flange
1.5 gpm/5.7 L/min. maximum
flow rate
™
T480.502 BATH/SHOWER Trim Kit
• Brass wall escutcheon
• Metal Lever handle
• "Vario" adjustable showerhead
• Shower arm and flange
• Metal slip-on Diverter tub spout
T480.501 SHOWER ONLY Trim Kit
• Brass wall escutcheon
• Metal Lever handle
• "Vario" adjustable showerhead
• Shower arm and flange
T480.500 VALVE ONLY Trim Kit
• Brass wall escutcheon
• Metal Lever handle
2.5 gpm/9.5 L/min. maximum
flow rate
Finishes
.002
Polished Chrome
.295
Satin Nickel (PVD)
®
®
.002
Polished Chrome
.224
Oil Rubbed Bronze
.295
Satin
Nickel (PVD)
.002
Polished Chrome
.224
Oil Rubbed Bronze
.295
Satin
®
®
.002
.295
Nickel (PVD)
Polished Chrome
Satin Nickel (PVD)
3-3/4" REF
(95 mm)
74" FOR HEAD
CLEARANCE
(1880 mm)
3-5/8" REF.
(92 mm)
74" FOR HEAD
CLEARANCE
(1880 mm)
74" FOR HEAD
CLEARANCE
(1880 mm)
74" FOR HEAD
CLEARANCE
(1880 mm)
(457 mm)
OPTIONAL
(102 mm)
3-5/8"
(92 mm)
OPTIONAL
(457 mm)
OPTIONAL
4" REF.
(102 mm)
4-7/8" REF.
(124 mm)
3-5/8"
(92 mm)
OPTIONAL
(457 mm)
OPTIONAL
4" REF.
(102 mm)
4" REF.
(102 mm)
18"
(457 mm)
OPTIONAL
4" REF.
(102 mm)
1-5/8" TO 3-1/4"
(41 mm TO 83 mm)
FINISHED WALL
7-3/8" REF
18"
1-1/2" REF.
(38 mm)
4"
TOP OF TUB RIM
BOTTOM OF TUB
FINISHED
5-1/2" REF.
(140 mm)
18"
1-1/2 REF.
(38 mm)
BOTTOM OF TUB
8-1/2" REF.
18"
1-1/2" REF.
(38 mm)
BOTTOM OF TUB
FINISHED WALL
7" REF.
(178 mm)
1-1/2 REF.
(38 mm)
(130 mm)
BOTTOM OF TUB
(187 mm)
5-1/2" REF
(140 mm)
WALL
5" REF.
(127 mm)
FINISHED
WALL
(216 mm)
5" REF.
(127 mm)
5-1/8"
REF.
7-1/2"
(191 mm)
1/2" COPPER
1-5/8" TO 3-1/4"
(41 mm TO 83 mm)
(205 mm)
1/2" COPPER
TOP OF TUB RIM
1-5/8" TO 3-1/4"
(41 mm - 83 mm)
(205 mm)
1/2" COPPER
TOP OF TUB RIM
1-5/8" TO 3-1/4"
(41 mm TO 83 mm)
8"
(203 mm)
1/2" COPPER
TOP OF TUB RIM
8-1/8"
8-1/8"
3" (76 mm)
7-1/2"
(191 mm)
4-1/2"
(113 mm)
7-1/8"
(181 mm)
Off
Hot
Off
Hot
© 2015 AS America Inc.
B14
Revised 5/15
FOR VOLUME & TEMPERATURE CONTROL VALVES
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
TRIM KITS
Trim Kit Finishes Roughing-In Dimensions
SEVA
Model # / Description
™
T480.508 BATH/SHOWER Trim Kit
• Brass wall escutcheon
• Metal lever handle
• Water Saving FloWise
showerhead
• Turbine Spray-1.5 gpm max. flow
• Angle adjustable
• Shower arm and flange
• Metal slip-on diverter tub spout
T480.507 SHOWER ONLY Trim Kit
• Metal wall escutcheon
• Metal lever handle
• Water Saving FloWise
showerhead
• Turbine Spray-1.5 gpm max. flow
• Angle adjustable
• Shower arm and flange
.002
Polished Chrome
.295
®
Satin Nickel (PVD)
4" REF
(102 mm)
74" FOR HEAD
CLEARANCE
(1880 mm)
(457 mm)
OPTIONAL
(102 mm)
FINISHED WALL
18"
1-1/2" REF.
4"
TOP OF TUB RIM
7" REF
(178 mm)
(38 mm)
5-1/8" REF
(130 mm)
BOTTOM OF TUB
1-5/8" TO 3-1/4"
(41 mm TO 83 mm)
8"
(203 mm)
1/2" COPPER
4-1/2"
(113 mm)
7-1/8"
(181 mm)
1.5 gpm/5.7 L/min. maximum flow rate
CERAMIX
PORTSMOUTH
PORTSMOUTH
®
T000.502 BATH/SHOWER Trim Kit
• Brass wall escutcheon
• Metal lever handle
• "Vario" adjustable showerhead
• Cast brass shower arm
• Cast brass diverter tub spout
T000.501 SHOWER ONLY Trim Kit
• Brass wall escutcheon
• Metal lever handle
• "Vario" adjustable showerhead
• Cast brass shower arm
T000.50 0 VALVE ONLY Trim Kit
• Brass wall escutcheon
• Metal lever handle
2.5 gpm/9.5 L/min. maximum flow rate
®
T420.502 BATH/SHOWER Trim Kit
• Metal wall escutcheon
• Metal lever handle
• Water Saving FloWise 3-function
showerhead
• Metal slip-on diverter tub spout
T420.501 SHOWER ONLY Trim Kit
• Metal wall escutcheon
• Metal lever handle
• Water Saving FloWise 3-Ffnction
showerhead
T420.500 BATH/SHOWER Trim Kit
• Metal wall escutcheon
• Metal lever handle
2.0 gpm/7.6 L/min. maximum flow rate
®
T415.502 BATH/SHOWER Trim Kit
• Decorative square
wall escutcheon
• Metal lever handle
• Water Saving FloWise 3-function
showerhead
• Metal slip-on diverter tub spout
T415.501 SHOWER ONLY Trim Kit
• Decorative square
wall escutcheon
• Metal lever handle
• Water Saving FloWise 3-function
showerhead
T415.500 BATH/SHOWER Trim Kit
• Decorative square
wall escutcheon
• Metal lever handle
Polished Chrome
.002
Note: Trim kits CANNOT be used with
Ceramix spool type valves.
.002
Polished Chrome
Oil Rubbed Bronze
.224
Satin Nickel (PVD)
.295
.002
Polished Chrome
.224
Oil Rubbed Bronze
.295
Satin Nickel (PVD)
4" REF.
(102 mm)
74" FOR HEAD
CLEARANCE
(1880 mm)
4-7/8"
(125 mm)
REF.
74" FOR
HEAD
CLEARANCE
(1880 mm)
OPTIONAL
(457 mm)
(102 mm)
4-7/8"
(125 mm)
REF.
74" FOR
HEAD
CLEARANCE
(1880 mm)
OPTIONAL
(457 mm)
(102 mm)
FINISHED WALL
(178 mm)
18"
(457 mm)
OPTIONAL
1/2" REF.
(13 mm)
4" REF.
(102 mm)
BOTTOM OF TUB
18"
4"
BOTTOM OF TUB
18"
1-1/2" REF.
4"
BOTTOM OF TUB
7" REF.
5" REF.
(127 mm)
FINISHED
WALL
8-1/2"
(216 mm)
REF.
5-1/8" REF.
(130 mm)
FINISHED
WALL
8-1/2"
(216 mm)
REF.
(38 mm)
5-1/8" REF.
(130 mm)
1-5/8" TO 3-1/4"
(41 mm TO 83 mm)
7-1/8" REF.
(182 mm)
1/2" COPPER
TOP OF TUB RIM
1-5/8" TO 3"
(41 mm TO 76 mm)
1/2" NPT
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
65'' AND 78''
(1651 mm AND 1981 mm)
7-5/8"D.
(195 mm)
1-1/2" REF.
(38 mm)
1/2"
COPPER
TOP OF TUB RIM
1-5/8" TO 3"
(41 mm TO 76 mm)
1/2" NPT
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
65'' AND 78''
(1651 mm AND 1981 mm)
7-5/8"
(194 mm)
1/2"
COPPER
TOP OF TUB RIM
4-3/4"
(121 mm)
6-11/16"
(170 mm)
6-1/2"
(165 mm)
2.0 gpm/7.6 L/min. maximum flow rate
© 2015 AS America Inc.
B15
Revised 5/15
FOR VOLUME & TEMPERATURE CONTROL VALVES
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
TRIM KITS
Trim Kit Finishes Roughing-In Dimensions
COPELAND
Model # / Description
®
T005.502 BATH/SHOWER Trim Kit
• Metal lever handle
• Metal wall escutcheon
.002
Polished Chrome
.224
Oil Rubbed Bronze
.295
Satin Nickel (PVD)
4-1/4"
(108 mm) REF.
FINISHED WALL
1-5/8" TO 3"
(41 mm TO 76 mm)
• Metal slip-on diverter tub spout
6"
(152mm) REF.
18"
4-7/8"
4"
(124mm ) REF.
BOTTOM OF TUB
FINISHED WALL
8-1/2"
(215 mm)
REF.
"SEE ILLUSTRATION "
(457 mm)
1-1/2" REF.
(38 mm) REF.
4-7/8" REF.
(124 mm) REF.
TOP OF
TUB RIM
BOTTOM OF TUB
FINISHED WALL
2-3/8"
(60 mm)
8-1/2"
(215 mm)
REF.
18"
(457 mm)
OPTIONAL
1-1/2" REF.
(38 mm)
4"
BOTTOM OF TUB
FINISHED WALL
18"
(457 mm)
6-1/2"
(165 mm)
4-3/4"
(122 mm)
8-1/2"
(215 mm)
REF.
1-1/2" REF.
(38 mm)
(102 mm)
OPTIONAL
7-1/2"
(191 mm)
1-1/2" REF.
(38 mm)
1/2"
COPPER
TOP OF
TUB RIM
1-5/8" TO 3"
(41 mm TO 76 mm)
1/2" NPT
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 65'' AND 78''
(1651 mm AND 1981 mm)
7-1/2"
(191 mm)
1/2" COPPER
FOR SLIP-ON
SPOUT
SHR
(213 mm)
TUB
1/2" COPPER
TOP OF
TUB RIM
1-1/4" (32 mm)
DIA. HOLE
1/2" NPT
SHR
(213 mm)
TUB
4"
(102 mm)
3/4" TO 2-3/8"
(19 mm TO 60 mm)
8-3/8"
3/4" TO 2-3/8"
(19 mm TO 60 mm)
8-3/8"
COPELAND
MOMENTS
MOMENTS
T005.501 SHOWER ONLY Trim Kit
• Metal lever handle
• Metal wall escutcheon
T005.500 VALVE ONLY Trim Kit
• Metal lever handle
• Metal wall escutcheo
2.5 gpm /9.5 L/min. maximum
flow rate
®
T005.508 BATH/SHOWER Trim Kit
• Metal wall escutcheon
Metal lever handle
•
• Water Saving FloWise
®
3-function showerhead
• Metal slip-on diverter tub spout
T005.507 BATH/SHOWER Trim Kit
• Metal wall escutcheon
Metal lever handle
•
• Water Saving FloWise
®
3-function showerhead
2.0 gpm/7.6 L/min. maximum
flow rate
®
T506.502 BATH/SHOWER Trim Kit
• Brass wall escutcheon
•Adjustable 3-function
showerhead
• Brass slip-on diverter tub spout
T506.501 SHOWER ONLY Trim Kit
• Brass wall escutcheon
•Adjustable 3-function
showerhead
T506.500 VALVE ONLY Trim Kit
• Brass wall escutcheon
2.5 gpm/9.5 L/min. maximum
flow rate
®
T506.508 BATH/SHOWER Trim Kit
• Brass wall escutcheon
• Water Saving FloWise 3-function
showerhead
• Brass slip-on diverter tub spout
T506.507 SHOWER ONLY Trim Kit
• Brass wall escutcheon
• Water Saving FloWise
• 3-function showerhead
74" (1880 mm)
FOR HEAD
CLEARANCE
(457 mm)
OPTIONAL
(102 mm)
.002
Polished Chrome
.224
Oil Rubbed Bronze
.295
Satin Nickel (PVD)
.002
Polished Chrome
.002
Polished Chrome
4-7/8"
(125 mm)
REF.
74" FOR
HEAD CLEARANCE
(1880 mm)
18" OPTIONAL
5-5/8" REF.
(143 mm)
74" FOR
HEAD CLEARANCE
(1880 mm)
4-7/8"
(124 mm)
REF.
74" FOR
HEAD CLEARANCE
(1880 mm)
© 2015 AS America Inc.
2.0 gpm/7.6 L/min. maximum
flow rate
B16
4"
(102 mm)
BOTTOM OF TUB
6-1/2"
(165 mm)
TOP OF
TUB RIM
1/2" COPPER
Revised 5/15
FOR VOLUME & TEMPERATURE CONTROL VALVES
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
TRIM KITS
Trim Kit Finishes Roughing-In Dimensions
GREEN TEA
GREEN TEA
TOWN SQUARE
TOWN SQUARE
Model # / Description
®
T010.502 BATH/SHOWER Trim Kit
• Metal wall escutcheon
• 6 3/4" Rain showerhead
• 12" Brass shower arm
• Metal slip-on diverter tub spout
• Metal lever handle
T010.501 SHOWER ONLY Trim Kit
• Metal wall escutcheon
• 6 3/4" Rain showerhead
• 12" Brass shower arm
• Metal lever handle
T010.500 VALVE ONLY Trim Kit
• Metal wall escutcheon
• Metal lever handle
2.5 gpm/9.5 L/min. maximum flow rate
®
T555.522 BATH/SHOWER Trim Kit
• Metal wall escutcheon
Metal lever handle
•
• Water Saving FloWise
3-function showerhead
• Metal slip-on diverter tub spout
T555.521 SHOWER ONLY Trim Kit
• Metal wall escutcheon
Metal lever handle
•
• Water Saving FloWise
3-function showerhead
2.0 gpm/7.6 L/min. maximum
flow rate
®
T555.522 BATH/SHOWER Trim Kit
• Metal wall escutcheon
• Metal lever handle
• Cast brass shower arm
• 4-1/2" Rain showerhead
• Metal slip-on diverter tub spout
T555.521 SHOWER ONLY Trim Kit
• Metal wall escutcheon
• Metal lever handle
• Cast brass shower arm
• 4-1/2" Rain showerhead
T555.520 VALVE ONLY Trim Kit
• Metal wall escutcheon
• Metal lever handle
2.5 gpm/9.5 L/min. maximum
flow rate
®
T555.528 BATH/SHOWER Trim Kit
• Metal wall escutcheon
• Metal lever handle
• Cast brass shower arm
• Water Saving FloWise
3-function showerhead
• Metal slip-on diverter tub spout
T555.527 SHOWER ONLY Trim Kit
• Metal wall escutcheon
• Metal lever handle
• Cast brass shower arm
• Water Saving FloWise
3-Function showerhead
2.0 gpm/7.6 L/min. maximum
flow rate
1"
1"
1-5/8" TO 3"
(41 mm TO 76 mm)
1/2" NPT
7-1/2"
(191 mm)
DIA.
1/2"
COPPER
(102 mm)
1/2" NPT
(12.7 mm) NPT
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 65'' (1651 mm)
AND 80'' (1880 mm)
7-1/2" DIA.
(191 mm)
1/2" COPPER
4" (102 mm)
1-5/8" TO 3"
(41 mm TO 76 mm)
1/2" I.P.S.
7-5/8"
(194 mm)
1/2" COPPER
1-5/8" TO 3"
(41 mm TO 76 mm)
1/2" I.P.S.
7-5/8"
(194 mm)
1/2" COPPER
4"
7-5/8"
(194 mm)
7-5/8"
(194 mm)
(12") REF.
74" (1880 mm)
FOR HEAD
CLEARANCE
5/3/8"
(137 mm)
REF.
74" FOR HEAD
CLEARANCE
(
1880 mm
18" OPTIONAL
74" FOR HEAD
CLEARANCE
(
1880 mm
18" OPTIONAL
(124 mm) REF.
74" FOR HEAD
CLEARANCE
1880 mm
(
18" OPTIONAL
FINISHED WALL
5"
(127 mm) REF.
2-1/4"
(57 mm)D.
305 mm
18"
(457 mm)
OPTIONAL
1-1/2"
(38 mm)
4-5/8"
(117mm )
5-7/8"
REF.
(149 mm)
REF.
TOP OF TUB RIM
BOTTOM OF TUB
8-1/2"
(216 mm) REF.
1-5/8" TO 3"
(41 mm TO 76 mm)
FINISHED WALL
"SEE ILLUSTRATION "
)
(457 mm)
1-3/4" REF.
(44 mm) REF.
4-5/8" REF.
(117 mm)
5-7/8" REF.
(149 mm)
TOP OF TUB RIM
BOTTOM OF TUB
FINISHED WALL
(25 mm)
2"
(51 mm) REF.
8"
(203 mm) REF.
)
(457 mm)
7-1/4" REF.
(184 mm)
(25 mm)
4" (102 mm)
4" (102 mm)
FINISHED WALL
4-7/8"
(216 mm) REF.
)
(457 mm)
TOP OF
TUB RIM
BOTTOM OF TUB
(25 mm)
8-1/2"
7-1/4" REF.
(184 mm)
(25 mm)
TOP OF
TUB RIM
BOTTOM OF TUB
1"
1"
.002
Polished Chrome
.075
Stainless Steel (PVD)
.002 Polished Chrome
®
®
.002
Polished Chrome
.224
Oil Rubbed Bronze
.295
Satin Nickel (PVD)
.002
Polished Chrome
.224
Oil Rubbed Bronze
.295
Satin Nickel (PVD)
© 2015 AS America Inc.
B17
Revised 5/15
TRIM KITS
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
FOR VOLUME & TEMPERATURE CONTROL VALVES
Trim Kit Finishes Roughing-In Dimensions
STUDIO
with FloWise
Model # / Description
®
T590.508 BATH/SHOWER Trim Kit
®
• Brass wall escutcheon
• Metal lever handle
• Shower arm and flange
• Water Saving FloWise
3-function showerhead
• Metal slip-on diverter tub spout
.002
Polished Chrome
.295
Satin Nickel (PVD)
T590.507 SHOWER ONLY Trim Kit
• Brass wall escutcheon
• Metal Lever Handle
• Shower arm and flange
• Water Saving FloWise
3-Function showerhead
T590.500 VALVE ONLY Trim Kit
• Brass wall escutcheon
• Metal lever handle
2.0 gpm/7.6 L/min. maximum
flow rate
™
QUENTIN
H
C
OFF
T440.502 BATH/SHOWER Trim Kit
• Brass wall escutcheon
• Metal lever handle
• 12" Shower arm and flange
• 6" Brass rain showerhead
• Metal slip-on diverter tub spout
T440.501 SHOWER ONLY Trim Kit
• Brass wall escutcheon
• Metal lever handle
• 12" Shower arm and flange
• 6" Brass rain showerhead
.002
Polished Chrome
.224
Oil Rubbed Bronze
.295
Satin Nickel (PVD)
T440.500 VALVE ONLY Trim Kit
• Brass wall escutcheon
• Metal lever handle
2.5 gpm/9.5 L/min. maximum
flow rate
™
QUENTIN
T440.508 BATH/SHOWER Trim Kit
• Metal wall escutcheon
Metal lever handle
•
• Water Saving FloWise
•3-function showerhead
• Metal slip-on diverter tub spout
®
.002
Polished Chrome
.224
Oil Rubbed Bronze
.295
Satin Nickel (PVD)
T440.507 SHOWER ONLY Trim Kit
• Metal wall escutcheon
Metal lever handle
H
C
•
• Water Saving FloWise
•3-function showerhead
2.0 gpm/7.6 L/min. maximum
flow rate
®
74" FOR HEAD
CLEARANCE
(1880 mm)
6-1/2"
(166 mm)
74" FOR HEAD
CLEARANCE
(1880 mm)
18" OPTIONAL
4" (102 mm)
4-7/8"
(125 mm)
74" FOR HEAD
CLEARANCE
1880 mm
(
(121 mm) REF.
FINISHED WALL
4-7/8" REF.
(124 mm)
216 mm
(8-1/2" REF.)
8-1/4"
(210mm)
18"
(457 mm)
OPTIONAL
1" MIN.
4"
(25 mm)
(102 mm)
BOTTOM OF TUB
FINISHED WALL
6"
(152 mm) DIA.
15-9/16" REF.
(396 mm)
9-1/4"
(234 mm)
(457 mm)
REF.
4-5/8" REF.
(119 mm)
TOP OF TUB RIM
BOTTOM OF TUB
FINISHED WALL
REF.
"SEE ILLUSTRATION "
)
18" OPTIONAL
(457 mm)
1-1/2" REF.
(38mm) REF.
4-13/16" REF.
TOP OF TUB RIM
BOTTOM OF TUB
2-3/8"
(60 mm)
4-3/4"
(121 mm)
(307 mm)
8-1/2"
(216 mm)
REF.
12"
1-5/8" TO 3"
(41 mm TO 76 mm)
1/2" NPT
(12,7 mm) NPT
6-3/4"
(171 mm)
1/2" COPPER
TOP OF TUB RIM
1-5/8" TO 3"
(41 mm TO 76 mm)
1/2" NPT
(12,7 mm) NPT
1/2" (13 mm)
SLIP-ON SPOUT
1-5/8" TO 3"
(41 mm TO 76 mm)
1/2" NPT
(12,7 mm) NPT
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 65'' (1651 mm)
AND 80'' (1880 mm)
9-3/16"
(233 mm)
4" (102 mm)
1/2" COPPER
6-3/8"
(163 mm)
(163 mm)
H
C
H
C
6-3/8"
© 2015 AS America Inc.
B18
Revised 5/15
Loading...