American Standard 6147111.002 User Manual
GENERAL DESCRIPTION:
Manual Diaphragm-Type Water Closet Flush Valve for
oor-mounted or wall-hung 1-1/2" top spud bowls.
PRODUCT FE AT U RES:
• Patent-pending DynaClean™ wiper spring technology
signicantly reduces maintenance and downtime.
• Self-cleaning wiper spring cleans the rell orice with
every ush; prevents valve run-on from clogging
• Prevents costly excess water usage and potential
ooding
• Premium, chlorine resistant EvoLast™ diaphragm
material prevents premature deterioration and failure
• Delivers consistent ushing performance and water
savings over time
• Dezincication-resistant brass alloy withstands the
most severe water conditions
• Non-hold open handle provides automatic shut-off
• High back pressure vacuum breaker prevents dripping
• Adjustable tailpiece for rough-in exibility
• Can be installed left or right handed
• No external volume adjustment
• ADA complaint
Ultima™ Manual Toilet Flush Valve
Diaphragm-Type
1.1 GPF / 4.2 LPF
MODEL NUMBER:
❑ 6147111.00 2 Flush Valve for 1-1/2" top spud bowl,
11-1/2" Supply C\L to top of bowl, 1.1 gpf/4.2 Lpf
OPERATING PRESSURE:
25 psi (owing)-80 psi (static)
FLOW REQUIREMENT:
25gpm (94.6 L/min.)
INCLUDES:
• 1" I.P.S. angle stop with back-ow prevention and
vandal-resistant cap
• Sweat solder kit including cover tube and wall ange
• High back pressure vacuum breaker with down tube
• Spud coupling & ange for 1-1/2" top spud
ACCESSORIES:
• Split ring pipe supports (2-1/2" & 6" C-E)
371 mm
(14-5/8")
TYPICAL WATER CLOSET INSTALLATION:
AFWALL
FINISHED WALL
57 mm Min.
(2-1/4")
292 mm
(11-1/2")
-C-L-
™
TOILET SHOWN
SUPPLY
DN 25 mm
(1" I.P.S.)
CRITICAL
LEVEL
SEE ROUGH-IN
ABOVE
108 mm, +/-13 mm
(4-3/4")(+/-1/2")
FINISHED
FLOOR
RECOMMENDED SPECIFICATION:
Manual toilet flush valve shall feature self-cleaning diaphragm valve with integral DynaClean wiper spring in bypass orifice to prevent
clogging. Advanced EvoLast diaphragm provides superior chorine-resistance. Includes dezincification-resistant cast brass valve body with
chrome finish. Includes sweat solder kit with wall flange and cover tube. Angle stop with back-flow protection and vandal-resistant stop cap.
High back pressure vacuum breaker included. 1.1 gpf / 4.2 Lpf Flush valve shall be American Standard Model # 6147.111.002.
© 2019 AS America Inc.
1/19
LISTINGS:
• ASSE 1037
• ANSI/ASME A112.19.2
• ADA Compliant
Roughing-in Dimensions
SUPPLY
DN 25 mm
(1" I.P.S.)
108-133 mm
(4-1/4" to 5-1/4")
Ultima™ Manual Toilet Flush Valve
Diaphragm-Type
1.1 GPF / 4.2 LPF
FINISHED WALL
38mm-127mm
(1-1/2-5")
-C-L-
*CRITICAL
LEVEL
152 mm
")
(6
(Min.)
FOR 1-1/2" TOP
SPUD FIXTURES
*Note: The Critical Line (-C-L-) on Vacuum Breaker
must typically be a minimum of 6
fixture. Consult Codes for details.
" (152 mm) above
6047.111
292 mm
(11-1/2")
6047.111
371 mm
(14-5/8")
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USABLE BUILDING FACILITIES-CHECK LOCAL CODES
© 2019 AS America Inc.
Left or Right Hand Installation
1/19
Loading...