American Fibertek MX-48-ZX-SC-PoE-HP Specsheet
48-ZX-PoE-
HP
10/100/1000Base-T to 1000 Base-ZX Ethernet
Media Converter / 3 Port Switch with 60W PoE
“Approved for AXIS Q6032-E PTZ Dome Network Camera”
FEATURES:
Complete Fiber Optic to Twisted Pair
Media Interface
Auto MDI / MDIX Detection
Auto Negotiate 10/100/1000 Ports
Link and Activity Indicators for UTP
and Fiber Ports
Singlemode Fiber
Power (60 Watts) Over Ethernet on
1 Port
Two RJ45 Data Ports Available
Extended Temperature Range
SPECIFICATIONS:
Ethernet:
Data Rate
Auto negotiated...10/100/1000 Mb/s
Connector.................................RJ45
PoE (1 port) ……………..…60 Watts
Optical:
One Fiber.................. 1490/1550 nm
Two Fiber…………………….1550nm
Distance
ZX 9/125u............................70 km
Loss Budget ...........................24 dB
Connector..........................….SC/ST
Power:
Voltage ................................ 48 VDC
Current................................ 200 mA
Connector........2 Pin Terminal Block
Recommended Power Supply:
48VDC @ 60W (Sold separately)
Environmental:
Temperature...........-40 °C to +75 °C
Humidity.........................5 % to 95 %
Size:
Module....................4.3” x 4.3” x 1.2”
Power Supply........ 4.6” x 3.6” x 1.6”
6/23/16 JPK
The American Fibertek 48-ZX Series transmits and receives (2)
copper 10/100/1000Base-T Ethernet signals at the RJ45 ports and (1)
optical 1000 Base-ZX over 1 or 2 singlemode fibers up to a distance
of 70 km. The system is comprised of two units forming a
communications link.
The 46-ZX-PoE-HP Series also sources up to 60 Watts of power to
an Ethernet powered device (PD) from one RJ45 port. The power is
carried over all 4 pairs of the Ethernet cable. However, it is required
that the PD have independent discovery and classification interfaces
for both the data pair and the spare pair of the Ethernet cable.
Both RJ45 ports may be used to deliver Ethernet data to devices.
external power supply is required.
The system is designed to be completely transparent with auto
negotiation features which automatically configures the unit for the
correct speed (10/100/1000 Base-T).
Auto MDI/MDIX operation eliminates the potential need for crossover
cables. Diagnostic indicators provide a quick visual indication of
system status
ORDERING INFORMATION:
MTX-48-ZX-SC-PoE-HP One Fiber Module TX ZX Singlemode SC Connector
MTX-48-ZX-ST-PoE-HP One Fiber Module TX ZX Singlemode ST Connector
MX-48-ZX-SC-PoE-HP Two Fiber Module ZX Singlemode SC Connector
MX-48-ZX-ST-PoE-HP Two Fiber Module ZX Singlemode ST Connector
POWER SUPPLY:
PS-4860 Universal Input to 48V 60W Output -40 to 75°C
The PoE module is typically used only at the system edge (to power the camera etc.).
The mating unit would then be the non PoE version of the product which is available in
module or rack card packages.
.
SERIES
SINGLEMODE
An
Loading...