American Fibertek MX-48-LX-ST, MX-48-LX-SC, MTX-48-LX-SC, MRX-48-LX-SC, RX-48-LX-SC-R3 Specsheet

		48
		SERIES
	10/100/1000Base-T to 1000Base-SX/LX
		MULTIMODE
	Ethernet Media Converter / 3 Port Switch

FEATURES:

♦Complete Fiber Optic to Twisted Pair Media Interface

♦Auto MDI / MDIX Detection

♦Auto Negotiate 10/100 Ports

♦Auto Negotiate 10/100 Ports

♦Link and Activity Indicators for UTP and Fiber Ports

♦Singlemode and Multimode Fiber Versions Available

SPECIFICATIONS:

Ethernet:
Data Rate:
Auto negotiated..........	10/100/1000 Mb/s
Connector ......................................	RJ45
Optical:
One Fiber........................	1310/1550 nm
Two Fiber
-SX.............................................	850 nm
-LX ...........................................	1310 nm
Distance/Loss Budget
SX
-62/125u.....................................	220 m
-Loss Budget ...............................	7 dB
LX
-62/125u.....................................	550 m
-Loss Budget .............................	10 dB
Connector ....................................	SC,ST
Power:
Voltage.......................................	12 VDC
Current.....................................	500 mA
Connector ..............	2 Pin Terminal Block
Power Supply:
Module: .... 12VDC(AFI Part #: PS-12D+)
Rack Card: ...........	(AFI Part #: SR-20/2)
Environmental:	-40 °C to +75 °C
Temperature ................
Humidity..............................	5 % to 95 %

Size:	……………4¼” x 4¼” x 1⅛”
Module .........

Rack Card One Slot…….....6½” x 1” x 5”

The American Fibertek 48 Series transmits and receives (2) copper 10/100/1000 BaseT Ethernet signals at the RJ45 ports and (1) optical 1000 Base-X over 1 or 2 multimode fibers. The system is comprised of two units forming a point-to-point communications link.

The system is designed to be completely transparent with auto negotiation features which automatically configures the unit for the correct speed (10/100/1000 BaseT). Auto MDI/MDIX operation eliminates the potential need for crossover cables. Diagnostic indicators provide a quick visual indication of system status.

Equipment may be ordered as stand alone modules or rack cards that are mounted in the American Fibertek Card Cage: SR-20/2

ORDERING INFORMATION:

MX-48-SX-AA	Two Fiber Module SX Multimode
RX-48-SX-AA	Two Fiber Rack Card SX Multimode
MX-48-LX-AA	Two Fiber Module LX Multimode
RX-48-LX-AA	Two Fiber Rack Card LX Multimode
MTX-48-LX-AA	One Fiber Module Transmitter LX Multimode
MRX-48-LX-AA	One Fiber Module Receiver LX Multimode
RTX-48-LX-AA	One Fiber Rack card Transmitter LX Multimode
RRX-48-LX-AA	One Fiber Rack card Receiver LX Multimode

Replace AA with ST or SC to specify the desired optical connector

3/14/11JPK