|
46-FX |
|
|
SERIES |
|
10/100Base-T to 100Base-FX |
||
MULTIMODE |
||
Ethernet Media Converter / 3 Port Switch |
|
|
|
|
FEATURES:
♦Complete Fiber Optic to Twisted Pair Media Interface
♦Auto MDI / MDIX Detection
♦Auto Negotiate 10/100 Ports
♦Link and Activity Indicators for UTP and Fiber Ports
♦Singlemode and Multimode Fiber Versions Available
SPECIFICATIONS:
Ethernet: |
|
|
|
Data Rate: |
|
|
|
Auto negotiated |
............. |
10/100 Mbs |
|
Connector................................. |
|
|
RJ45 |
Optical: |
|
|
|
Two Fiber............................ |
|
|
1310 nm |
One Fiber................... |
|
1310/1550 nm |
|
Source: |
|
|
|
Multimode Two Fiber ............. |
LED |
||
Multimode One Fiber............ |
Laser |
||
Loss Budget |
............................ |
|
11 dB |
Connector.............................. |
|
|
SC,ST |
Power: |
|
|
|
Voltage ................................ |
|
|
12 VDC |
Current................................ |
|
|
500 mA |
Connector........ |
|
2 Pin Terminal Block |
|
Power Supply: |
|
|
|
Module:....... |
12VDC (AFI Part #: PS-12D+) |
||
Rack Card:............. |
|
(AFI Part #: SR-20/2) |
|
Environmental: |
|
||
Temperature........... |
-40 °C to +75 °C |
||
Humidity......................... |
|
|
5 % to 95 % |
Size: |
|
|
|
Module..................... |
|
4¼” x 4¼” x 1⅛” |
|
Rack Card One Slot ...... |
6½” x 1” x 5” |
The American Fibertek 46 Series transmits and receives (2) copper 10/100 BaseT Ethernet signals at the RJ45 ports and (1) optical 100 Base-FX over 1 or 2 multimode fibers. The system is comprised of two units forming a point-to-point communications link.
The system is designed to be completely transparent with auto negotiation features which automatically configures the unit for the correct speed (10/100 BaseT). Auto MDI/MDIX operation eliminates the potential need for crossover cables. Diagnostic indicators provide a quick visual indication of system status.
Equipment may be ordered as stand alone modules or rack cards that are mounted in the American Fibertek Card Cage: SR-20/2
ORDERING INFORMATION:
MX-46-FX-AA Two Fiber Module FX Multimode RX-46-FX-AA Two Fiber Rack Card FX Multimode MTX-46-FX-AA One Fiber Module Transmitter FX Multimode MRX-46-FX-AA One Fiber Module Receiver FX Multimode
RTX-46-FX-AA One Fiber Rack card Transmitter FX Multimode RRX-46-FX-AA One Fiber Rack card Receiver FX Multimode
Replace AA with ST or SC to specify the desired optical connector
8/10/11JPK