![](/html/fb/fb33/fb33b57c476a02434e887bbf171557151e44900af6a0f347b1551be63d16db8b/bg1.png)
10/100/1000Base-T to 1000 Base-ZX Ethernet
Media Converter / 3 Port Switch with PoE
FEATURES:
Complete Fiber Optic to Twisted Pair
Media Interface
Auto MDI / MDIX Detection
Auto Negotiate 10/100/1000 Ports
Link and Activity Indicators for UTP
and Fiber Ports
Singlemode
Power Over Ethernet on Both Ports
SPECIFICATIONS:
Ethernet:
Data Rate
Auto negotiated ... 10/100/1000 Mb/s
Connector.................................RJ45
PoE (2 RJ45 ports)...............802.3af
PoE (1 RJ45 port)................. 802.3at
Optical:
One Fiber.................. 1490/1550 nm
Two Fiber…………………….1550nm
Distance
ZX 9/125u............................ 70 km
Loss Budget ...........................24 dB
Connector..........................….SC/ST
Power:
Voltage ................................ 48 VDC
Current................................ 200 mA
Connector........2 Pin Terminal Block
Recommended Power Supply:
48VDC @ 30W (Sold separately)
Environmental:
Temperature...........-40 °C to +75 °C
Humidity.........................5 % to 95 %
Size:
Module... ……………4¼” x 4¼” x 1⅛”
6/23/16 JPK
The American Fibertek 48-ZX Series transmits and receives (2) copper
10/100/1000Base-T Ethernet signals at the RJ45 ports and (1) optical 1000
Base-ZX over 1 or 2 singlemode fibers up to a distance of 70 km. The system
is comprised of two units forming a communications link.
The Series 48-ZX Series sources power to devices from the RJ45 ports over
the copper connection. Both RJ45 ports may be used to deliver low power
802.3af (15 watts) to devices. A single RJ45 port is used to deliver high
power 802.3at (30 watts) to a single device. An external power supply is
required for the PoE module.
The system is designed to be completely transparent with auto negotiation
features which automatically configures the unit for the correct speed
(10/100/1000 Base-T).
Auto MDI/MDIX operation eliminates the potential need for crossover cables.
Diagnostic indicators provide a quick visual indication of system status.
ORDERING INFORMATION:
MTX-48-ZX-SC-PoE One Fiber Module Transmitter ZX Singlemode SC Connector
MTX-48-ZX-ST-PoE One Fiber Module Transmitter ZX Singlemode ST Connector
MX-48-ZX-SC-PoE Two Fiber Module ZX Singlemode SC Connector
MX-48-ZX-ST-PoE Two Fiber Module ZX Singlemode ST Connector
POWER SUPPLY:
PS-48D Universal Input to 48V 30W Output 0 to 50°C
PS-4830 Universal Input to 48V 30W Output -40 to 75°C
The PoE module is typically used only at the system edge (to power the camera etc.).
The mating unit would then be the non PoE version of the product which is available in
module or rack card packages.
48-ZX-PoE
SERIES
SINGLEMODE