American Fibertek MX-46-FX-ST-POE+, MX-46-FX-SC-PoE+, MTX-46-FX-ST-POE+, MTX-46-FX-SC-PoE+, MRX-46-FX-ST-PoE+ Specsheet

10/100 Base-T to 100 Base-FX Ethernet
Media Converter / 3 Port Switch with PoE+

FEATURES:

♦ Complete Fiber Optic to Twisted Pair

Media Interface

♦ Auto MDI / MDIX Detection
♦ Auto Negotiate 10/100 Ports
♦ Link and Activity Indicators for UTP

and Fiber Ports

♦ Singlemode and Multimode Fiber

Versions Available

♦ Power Over Ethernet on Both Ports

SPECIFICATIONS:

Ethernet:

Data Rate

Auto negotiated .......... 10/100 Mb/s

Connector.................................RJ45

PoE (2 RJ45 ports).............. 802.3af

PoE (2 RJ45 ports)...............802.3at

Optical:

One Fiber.................. 1310/1550 nm

Two Fiber............................ 1310 nm

Source:

Multimode Two Fiber ............. LED

Multimode One Fiber............ Laser

Distance

FX 62/125u............................ 2 km

Loss Budget ...........................11 dB

Connector.............................. SC,ST

Power:

Voltage ................................ 48 VDC

Current................................ 200 mA

Connector........2 Pin Terminal Block

Recommended Power Supply:

48VDC @ 60W (Sold separately)

Environmental:

Temperature...........-40 °C to +75 °C

Humidity.........................5 % to 95 %

Size:

Module..................... 4¼” x 4¼” x 1⅛”

10/23/12 JPM

The American Fibertek 46-PoE+ Series transmits and receives (2) copper
10/100 Base-T Ethernet signals at the RJ45 ports and (1) optical 100 Base­FX over 1 or 2 multimode fibers. The system is comprised of two units
forming a point-to-point communications link.

The 46-PoE+Series sources power to devices from the RJ45 ports over the
copper connection. Both RJ45 ports may be used to deliver 802.3af (15
watts) or 802.3at (30 watts) to PD powered devices. An external power
supply is required.

The system is designed to be completely transparent with auto negotiation
features which automatically configures the unit for the correct speed (10/100
Base-T).

Auto MDI/MDIX operation eliminates the potential need for crossover cables.
Diagnostic indicators provide a quick visual indication of system status.

ORDERING INFORMATION:

MTX-46-FX-SC-PoE+ One Fiber Module Transmitter FX Multimode SC Connector
MTX-46-FX-ST-PoE+ One Fiber Module Transmitter FX Multimode ST Connector
MX-46-FX-SC-PoE+ Two Fiber Module FX Multimode SC Connector
MX-46-FX-ST-PoE+ Two Fiber Module FX Multimode ST Connector

POWER SUPPLY:

PS-4860 Universal Input to 48V 60W Output -40 to 75°C

The PoE module is typically used only at the system edge (to power the camera etc.).
The mating unit would then be the non PoE version of the product which is available in
module or rack card packages.

46-PoE+

SERIES

MULTIMODE