Installation Manual
INE-W928R Kit
• Smart fortwo colour / part-no.:
black / KIT-8SMT
Compatible with these Alpine navigation devices
INE-W928R
4
3
Double DIN Set contents
• (1) facia plate
• (2) mounting bracket right
4
2
1
• (3) mounting bracket left
• (4) hexagon socket countersunk
at head screw
1. Smart Fortwo with
radio preparation (pocket)
or OEM head unit
2. Remove the switch unit
(xed by clamps)
by pulling it towards you
5. Mount mounting brackets
left and right to INE-W928R
Connect all required circuit
points and place the Double
DIN head unit on dash board
3. Remove the TORX TX25 screw
holding the surrounding frame
(see arrow)
4. Remove surrounding frame
(xed by clamps) - by pulling it
towards you
Remove the 4 screws (see arrows)
pull out the pocket / OEM head unit
All installation work must be performed by a qualied professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
6. Fix INE-W928R with OEM Screws
Place facia plate and x it with OEM
TORX TX25 screw (see step 3)
7. Reinstall everything in reverse
order to nish installation
© 01/2014 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
Loading...