Page 1
Verify the proper functioning
of the system.
Take the supplied facia plate,
place on it the silver frame
and the air vents and mount
the assembly on the
dashboard.
This is the final result.
VOLKSWAGEN
GOLF VII
Compatible with double DIN devices
05/2015 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
Double DIN Kit content
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.
Facia Plate
Mounting Brackets + Screws
Plastic lids
Page 2
Installation Manual Double DIN Kit
In the picture the original
dashboard.
Carefully unclip the original
panel, remove from it and
save the air vents and the
silver frame.
Remove the OEM head unit
using Becker keys.
Take the left and right
brackets supplied and
place them as shown in the
picture.
Take the remaining two
brackets and mount them on
the AFT unit using the four
screws supplied.
Connect all cables, insert the
AFT unit into the housing and
fix it with the supplied screws
as show in the picture.
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.
Loading...