Alpine IVAD-900-R Service manual
IVA-D900R
SERVICE MANUAL
Mobile Multimedia Station
DIG ITAL VID EO
4/03-A
68E35542S01
Caution : The part marked with ! is generating a high Voltage, so care will be
necessary when working.
* The model is component system unit of Monitor Unit, Tuner Unit and DC/DC Converter Unit.
* DVD region number (playable region number) : Region Number 2 or ALL
TO ALPINE Home Page
<Cautions for Safe Repair Work>
r
s
.
The following cautions will prevent accidents in the workplace and will ensure safe products.
*The symbols indicate caution is needed to prevent injuries and damage to property.
The symbols and their meanings follow.
Warning
Caution
*The following symbols indicate two levels of cautions.
When you see this symbol, you have to be very careful.
When you see this symbol, you have to follow the instructions there.
If you ignore this symbol and handle the product incorrectly or unsafely,
serious injury or death may result.
If you ignore this symbol and handle the product incorrectly or unsafely,
injury or only material damage may result.
Warning
Do not look squarely into the laser light
coming from the pickup. Always use a designated fuse.
You may loose you sight. Use of an incorrect fuse may result in a fire.
Caution
Do not allow wiring to be caught in the Battery Caution
screw/chassis. Use the designated battery.
If wiring is caught in the screw/chassis, it may Confirm the correct polarity and seat of the battery.
cause a short circuit, resulting in a fire. An incorrect battery or an improperly connected or
Fuse Caution
seated battery may result in a fire.
High Temperature Caution Designated Parts Caution
Touching the heat sink may cause severe burns. Look up the part list and ensure that only
designated parts are used to prevent problems or
accidents.
Reverse Power Supply Connections o
Misconnections Caution Ensure that the wiring is correct when rewiring to
Reverse power supply connections or prevent problems with ignition/breakdown.
misconnections may cause ignition problems and
smoke may result.
Soldering Caution Wear Glove
Hot solder from solder splash may cause severe Wear gloves to prevent electrical shocks or injury
burns. from the end face of the metal.
For the FDA laser standard, the following CAUTION label is stuck on each product
Please be careful for repair.
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
Wiring Caution
Contents
Cabinet Assembly Parts List (Monitor Unit)
DVD Deck Mechanism Assembly Parts List
Electrical Parts List (Monitor Unit)
Cabinet Assembly Parts List (Tuner Unit)
Electrical Parts List (Tuner Unit)
Cabinet Assembly Parts List
(DC/DC Converter Unit)
Electrical Parts List
(DC/DC Converter Unit)
Packing Assembly Parts List
Packing Method View
System Connections
Adjustment Procedures
Extension Cable
* Monitor Unit Block
* Tuner Unit Block
* DC/DC Converter Unit Block
NOTE : Due to continuing product improvement, specifications and designs are subject to
change without notice.
402
401
405 416
417
403
DC/DC Converter Unit
to
405
408
412
411
413
415
409
407
416
Tuner Unit
Monitor Unit
404
X4
X1
X1
X4
X6
404
402
415 -1
415 -2
415 -3
X1
401
410
406
414
X1
X1
415 -6
415 -5
X1
415 -4
Symbol
No.
Part No.
Description
401
402
403
404
405
406
407
408
409
410
411
412
15D61379Y01
33C60496Y01
15B41543Y01
01T55446Y02
01T95334W02
01T95205W13
01T35047Y04
01T65556Y01
01T65563Y01
07T75070W01
07B50413W05
07B50413W06
CASE,INNER
FACE,PLATE
CARRING,BAG
ASSY,REMOCON RUE4191
ASSY,ANT WIRE MAIN
ASSY,WIRE PWR D900JR
ASSY,WIRE REMOTE 900
ASSY,POWER WIRE RAD
ASSY,DIN CABLE 3M
BKT,STOPPER ASSY
BKT,SIDE(L)
BKT,SIDE(R)
Symbol
No.
Part No.
Description
413
414
415-1
415-2
415-3
415-4
415-5
415-6
416
417
75T58346F16
01T15087Y01
03S60820Y15
03S60828Y03
03A31982Y01
36A11113W01
03A60836Y01
60T55630W01
01A31635Y02
68P50520Y88
PAD,MAGIC TAPE
ASSY,CVA-1000R ISO
SCR,MCH 4X8 ZN A
SCR,TPG 4X14 ZN A
SCR,M4X5 FLAT
CAP,RUBBER(A)
SCR,CUS 5X7 ZN A
BAT,MGN R03(NB)UM-4
ASSY,KIT REMOCON
O/M AOEU
Packing Assembly Parts List
Packing Method View
TO CONTENTS
System Connections
TO CONTENTS
Antenna
To remote contr
interface box
11
IVA-D900R
Tuner BOX
10
POWER SUPPLY
REMOTE IN/OUT
12
NAVIGATION IN
DISPLAY OUT
13
16
ol
37
EQ/DIV
NORM
3
IVA-D900R
8
<Monitor>
9
10
7
Nothing connects
with this line.
BATTERY BATT
(Yellow)
GND
(Black )
2
1
ILLM
(Orange)
*
5
(Yellow)
4
To the instrument cluster
illumination lead
6
GND
(Black)
REMOTE OUT AUX1
(White/Brown)
REMOTE OUT AUX2
(White/Brown)
REMOTE OUT AUX3
SUB W.
REAR
PREOUT
FRONT
L
R
Ai-NET
VIDEO
L
AUX OUT
AUDIO
R
1
2
VIDEO
(MONO)
L
AUX IN 1/2
AUDIO
R
1
2
3
VIDEO
CAMERA IN
(MONO)
L
AUX IN 3
AUDIO
R
RADIO ANTENNA IN
38
39
40
14
REMOTE
TURN-ON
(Blue/White)
15
POWER ANT
(Blue)
AUDIO
INTERRUPT IN
(Pink/Black)
PARKING
BRAKE
(Yellow/Blue)
ACC
(Red)
28
BATTERY
(Yellow)
(White/Brown)
REMOTE IN AUX1
(White/Brown)
REMOTE IN AUX2
(White/Brown)
REVERSE
(Orange/White)
20
22
23
25
*
27
5
P.ANT
(Blue)
ACC
(Red)
17
17
17
To remote
input lead.
18
18
19
To remote
output lead.
To plus side of the
back lamp signal
lead of the car
21
24
26
GND
(Black)
SPEAKER
LEFT
FRONT
(White)
36
F-Lch R-Rch F-Rch
(White/
Black)
35
SPEAKER
LEFT
REAR
(Green/
Black)
34
R-Lch
(Green)
33 32
SPEAKER
RIGHT
REAR
(Violet)
(Violet/
Black)
31
6
SPEAKER
RIGHT
FRONT
(Grey/Black)
30
(Grey)
29
*Set the system switch to "NORM" when only a changer is connected (when the Ai-NET
compatible equalizer is not used).
*Note: Be sure to connect the leads
correctly after identifying the ISO
connector terminals for the Battery
and Ignition (ACC).
1 ISO Antenna Plug
TO CONTENTS
2 ISO Antenna Conver
ter Plug (Inc
luded)
3 Antenna Extension Cable
4 ISO Connector (Included)
5 Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle's
battery.
6 Ground Lead (Black)
Connect this lead to a good chassis ground on the
vehicle. Make sure the connection is made to bare metal
and is securely fastened using the sheet metal screw
provided.
7 Fuse Holder (10A)
8 Digital Output Terminal (Optical)
Use when combining fiber digital input compatible
products.
9 Remote Control Interface Connector
Connect to the remote control interface box.
Power Supply Connector
10
11
DC/DC Converter
*Do not install the converter at a location subjected to water
such as under the floor mat or air conditioner. This may cause
a malfunction.
*Do not bundle the DC/DC converter cable with other audio
cables. Doing so may induce noise into your system.
*Keep the DC/DC converter away from the Antenna cables and
the rear side of the unit, otherwise noise may be generated
when receiving radio broadcast.
Remote IN/OUT Terminal
12
Display Output Terminal
13
Ai-NET Connector
14
Connect this to the output or input connector of other
product (CD changer, Equalizer, etc.) equipped with Ai-
NET.
15
Antenna Receptacle
System Switch
16
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM
position.
*Be sure to turn the power of f to the unit befor
switch position.
Remote Control Output Lead (White/Brown)
17
Connect this lead to the remote contro
lead outputs the contro
l.
contro
lling signals fr
l input lead. This
om the remote
hanging the
e c
Remote Control Input Lead (White/Brown)
18
Connect the external Alpine pr
output lead.
19
Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect
to the plus side of the car's reverse lamp that lights when
the transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked with putting the car into reverse (R).
Remote Turn-On Lead (Blue/White)
20
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
To amplifier or equalizer
21
Power Antenna Lead (Blue)
22
Connect this lead to the +B terminal of your power
antenna, if applicable.
Audio Interrupt In Lead (Pink/Black)
23
24
To vehicle phone
Parking Brake Lead (Yellow/Blue)
25
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals
to the IVA-D900R.
Connect this lead to the parking brake lead
26
oduct to the r
emote contro l
powered when parking brake is engaged.
27
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessor y
position.
Fuse Holder (15A)
28
Right Front (+) Speaker Output Lead (Grey)
29
30
Right Front (–) Speaker Output Lead (Grey/Black)
Right Rear (–) Speaker Output Lead (Violet/Black)
31
Right Rear (+) Speaker Output Lead (Violet)
32
Left Rear (+) Speaker Output Lead (Green)
33
Left Rear (–) Speaker Output Lead (Green/Black)
34
Left Front (–) Speaker Output Lead (White/Black)
35
Left Front (+) Speaker Output Lead (White)
36
Monitor Extension Cable (Included)
37
38
Subwoofer output Terminal
Connect the input lead of an amplifier for the subwoofer to
this terminal.
39
Rear output Terminal
Use when connecting an amplifier.
Front output Terminal
40
Use when connecting an amplifier.
To prevent external noise from entering the audio system.
*Locate the unit and route the leads at least 10 cm away from the car harness.
Keep the batter y power leads as far away from other leads as possible.
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
If you add an optional noise suppressor, connect it as far away fr om the unit as possible. Your Alpine dealer carries various
noise suppressors, contact them for fur
Your Alpine dealer knows best about noise prevention measures so consult your dealer for further infor mation.
her infor
t
mation.
<System Example>
TO CONTENTS
Connect the Ai-NET compatible audio processor (Fiber digital compatible), Navigation system, DVD
IVA-D900R Monitor
NVE-N077PS
Navigation system
(Sold Separately)
1
*Fiber digital Input terminal
IVA-D900R
2
3
Tuner BOX
POWER SUPPLY
REMOTE IN/OUT
NAVIGATION IN
DISPLAY OUT
SUB W.
REAR
PREOUT
FRONT
L
R
Ai-NET
VIDEO
L
AUX OUT
AUDIO
R
1
2
VIDEO
(MONO)
L
AUX IN 1/2
AUDIO
R
1
2
3
VIDEO
CAMERA IN
(MONO)
L
AUX IN 3
AUDIO
R
RADIO ANTENNA IN
6
7
Ai-NET
cable
Fiber digital
Input terminal
(for DVD Player)
10
A
(Fiber Digital compatible)
Fiber optic
5
cab
(for head unit)
udio Pr
ocessor (Ai-NET)
(Sold Separately)
6
6
12
Ai-NET
cable
le
player and changer.
10
Fiber digital
Input terminal
(for Changer)
10
**
Fiber
optic cable
4
EQ/DIV
NORM
13
(White/Brown)
REMOTE IN
(White/Bro wn)
REMOTE OUT
(AUX 1)
*When connecting with PXA-H510 :
-
Connect the fiber digital input terminal to the DVD.
-
IVA-D900R and DVA-5205P cannot be connected
simultaneously when fiber digital is in use
When the NVE-N055PS is connected for the Navigation System,
use the RGB conversion cable KCE-030N (Sold separately).
1 RGB Cable (Included Navigation)
2 Remote IN/OUT Terminal
3 RGB Input Terminal
Connect this to the RGB output terminal of the Navigation
System.
4 System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM
position.
*Be sure to turn the power off to the unit befor e changing the
switch position.
5 Digital Output Terminal
6 Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
(Yellow)
8
DVD Video Player
(Sold Separately)
.
9
Fiber optic cab
le
Ai-NET cable
11
**
Only connect fiber digital compatible CD Changer
CD Changer (Ai-NET)
(Sold Separatel
y)
7 AUX Video Input (AUX1) Terminal
Connect the video output lead of a DVD video player or
DVD changer to this terminal.
8 RCA Extension Cable (Included with DVD video
9 Ai-NET Cable (Included with DVD video player)
10
Fiber optic Cable (Sold Separatel
Ai-NET Cable (Included with Equalizer)
11
12
Ai-NET Cable (Included with CD Changer)
Remote Control Output Lead (White/Brown)
13
y)
Connect this lead to the remote control input lead. This
lead outputs the controlling signals from the remote
control.
14
AUX Audio/Video Input (AUX2) Terminals
15
AUX Audio Input (AUX1) Terminals
player)
<When Connecting External Equipment>
TO CONTENTS
2
IVA-D900R
Tuner BOX
POWER SUPPLY
REMOTE IN/OUT
NAVIGATION IN
DISPLAY OUT
SUB W.
REAR
PREOUT
FRONT
L
R
Ai-NET
4
VIDEO
L
AUX OUT
AUDIO
R
1
2
VIDEO
(MONO)
L
AUX IN 1/2
AUDIO
R
1
2
3
VIDEO
CAMERA IN
(MONO)
L
AUX IN 3
AUDIO
R
RADIO ANTENNA IN
1
EQ/DIV
NORM
To Audio Input terminal
Rear monitor 1
8
(Sold Separately)
To Video Input terminal
3
8
To Video Input terminal
Rear monitor 2
(Sold Separately)
To Audio Input terminal
5
8
To Video Output terminal
TV Tuner or VCR
(Sold Separately)
To Audio Output terminal
To Video Output terminal
6
8
Back-up camera
(Sold Separately)
REMOTE OUT(AUX3)
wn)
(White/Bro
REMOTE IN(AUX1)
wn)
o
(White/Br
REMOTE IN(AUX2)
own)
(White/Br
(Orange/White)
REVERSE
1 System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM
position.
*Be sure
to turn the power of
f to the unit before c
switch position.
2 Remote IN/OUT Terminal
3 AUX Video/Audio Output (AUX2) Terminal
Use when connecting an optional monitor etc.
4 AUX Video/Audio Output (AUX1) Terminal
Use when connecting an optional monitor etc.
5 AUX Video/Audio Input (AUX3) Terminal
6 CAMERA Input Terminal
Use when connecting a back-up camera.
7 Remote Control Output Lead (White/Brown)
Connect this lead to the remote contro
l input lead. This
lead outputs the controlling signals from the remote
control.
7
10
10
9
hanging the
REMOTE IN
REMOTE OUT
REMOTE OUT
(White/Br
wn)
o
(White/Brown)
(White/Brown)
Use only when back-up camera is connected.
8 RCA Extension Cable (Sold separately)
9 Connect to the plus side of the car's reverse lamp
which lights when the transmission is shifted into
reverse (R).
Switches the video picture to the back-up camera.
This is linked to putting the car into reverse (R).
10 Remote Control Input Lead (White/Brown)
Adjustment Procedures
TO CONTENTS
1. VIDEO Adjustment
(1) Connections
Tuner Unit
Monitor Unit
Digital
Oscilloscope
Pattern
Generator
10 STEP-IN
Only Step7-5
(2) Adjustment
Step
1
2
3
-1
4
-2
5
(1)
-1
-2
-3
6
-4
(2)
(3)
-1
7
-2
AUX1 DISPLAY
VIDEO OUT
POWER
DC14.4V
Operations Process
Initialized setting up of products :
OPEN/CLOSE KEY=OFF
BATT ON
ACC ON
Push OPEN/CLOSE KEY.
OPEN/CLOSE SW ON at lighting SLIDE
OPEN LED
POWER ON by pushing any KEY
Set up DIAG Mode (only RADIO Mode).
Push long "F7" KEY.
Next, push "V.SEL" KEY.
Next, push "LIST" KEY.
Next, push "Rotary Encoder SW".
Select "VIDEO CHK" by pushing "F3"
KEY at DIAG Mode.
Select "F4" KEY at VIDEO CHK Mode.
Contrast Adjustment
(G Level Adjustment)
Sub Contrast-R Adjustment
DC/DC Converter Unit
Test Point/
P.W.Board
Coordinates
TP7121
( 1-E )
TP7121
( 1-E )
TP7120
( 1-E )
Test Point
Test Point
Start VIDEO Adjustment.
-1. Select channel 0Dch by pushing "F3"
NEXT KEY.
-2. Adjust to 0.7Vp-p by pushing "F1" UP KEY
or "F2" DOWN KEY.
(Refer to Figure-2)
-1. Select channel 0Ech by pushing "F3"
NEXT KEY.
-2. Adjust to pushing "F1" UP KEY or "F2"
DOWN KEY so that wave-form of CH2(R)
may match wave-form of CH1(G).
(adjust to 0.7Vp-p.)
(Refer to Figure-2)
+
-
Only Step 7-1, -2, -3 and 8
CH-1
CH-2
AC Mode
<Figure 1>
Adjustment
Step Operations Process
TO CONTENTS
-3
Sub Contrast-B Adjustment
7
-4
Y-GAIN Adjustment
Finish 2546ADJ Mode by pushing "F7"
8
RETURN KEY.
<at mistaking the channel setup>
9
Push 2546 RESET by pushing "F5" SW.
Finish DIAG Mode by pushing twice "F7"
10
RETURN KEY.
Push OPEN/CLOSE KEY.
-1
11
OPEN/CLOSE SW OFF at lighting TILT
-2
CLOSE LED
POWER OFF by pushing long SOURCE
12
KEY
ACC OFF
13
BATT OFF Finish VIDEO Adjustment.
14
Test Point/
P.W.Board
Coordinates
TP7121
( 1-E )
TP7122
( 1-E )
TP7121
( 1-E )
Adjustment
-1. Select channel 0Fch by pushing "F3"
NEXT KEY.
-2. Adjust to pushing "F1" UP KEY or "F2"
DOWN KEY so that wave-form of CH2(B)
may match wave-form of CH1(G).
(adjust to 0.7Vp-p.)
(Refer to Figure-2)
-1. Select channel 02ch by pushing "F3"
NEXT KEY.
'-2. Adjust to 0.7Vp-p by pushing "F1" UP KEY
or "F2" DOWN KEY.
NOTE : VIDEO Adjustment Channel
[02], 03, .............09, [0D], [0E], [0F], [10], 11.............14, 16
Figure 2
Step
Description
Connection
Signal Generator
Dial Control
Test Point /
P.W.Board
Coordinates
Adjustment
1
FM S-METER
Adjustment
Figure 5
87.5MHz
(Input 28dBu,
Mod. OFF)
87.5MHz
TP1102
(1-E)
TP1121
(1-F)
<Auto adjustment>
1. Select FM Mode.
2. Connect to TP1102 and GND for
2 to 3 sec.
(NOTE : Perform the auto adjustment
by decreasing input level between 3
and 5dBu, and then perform the
auto adjustment again with input level
28dBu.
In this as make sure output at TP1121
shows 1.5± 0.1V.)
2. FM/AM Tuner Adjustment
45 ohm
10 ohm
60 ohm
Input
Output
For 50 ohm FM Signal Generator
FM Signal Generator
For 50 ohm AM Signal Generator
15pF
30ohm
65pF
Input
Output
AM Signal Generator AM Dummy Antenna
+
-
DC Volt Meter
FM Dummy Antenna
Tuner Unit
Antenna Receptacle
TP1121
TP2511
GND
+
-
+
-
Monitor Unit +
DC/DC Converter Unit
* Connect to GND
for 2 to 3 sec.
<Figure 5>
<Figure 6>
<Figure 3> <Figure 4>
Antenna Receptacle
Monitor Unit +
DC/DC Converter Unit
DC Volt Meter
Tuner Unit
TP1121
TP2511
GND
+
-
* Connect to GND
for 2 to 3 sec.
TO CONTENTS
(1) Dummy Antenna Circuit
(2) Connections
(3) Control Settings
Power Switch ...................................................................... ON Band Switch ..................................... FM/MW/LW
Fader Control ................................................... Center Position MX Effect ...................................................... OFF
Balance Control ............................................... Center Position T-CORR Effect ............................................. OFF
Treble Control ................................................... Center Position Others .......................................................... OFF
Bass Control ..................................................... Center Position
(4) Adjustment Procedures
Step
Description
Connection
Signal Generator
Dial Control
Test Point /
P.W.Board
Coordinates
Adjustment
2
MW S-METER
Adjustment
Figure 6
999kHz
(Input 34dBu,
Mod. OFF)
999kHz
TP1102
(1-E)
TP1121
(1-F)
<Auto adjustment>
1. Select MW Mode.
2. Connect to TP1102 and GND for
2 to 3 sec.
(NOTE : Perform the auto adjustment
by decreasing input level between 3
and 5dBu, and then perform the auto
adjustment again with input level
28dBu.
In this asmake sure output at
TP1121
shows 1.0±
0.1V.)
3
LW S-METER
Adjustment
Figure 6
216kHz
(Input 34dBu,
Mod. OFF)
216kHz
TP1102
(1-E)
TP1121
(1-F)
<Auto adjustment>
TO CONTENTS
1. Select LW Mode.
2. Connect to TP1102 and GND for
2 to 3 sec.
(NOTE : Perform the auto adjustment
by decreasing input level between 3
and 5dBu, and then perform the auto
adjustment again with input level
28dBu.
In this as make sure output at
shows 1.0±0.1V.)
NOTE : For the Test Points and Ajustment parts, refer to the Parts Layout on P.W.Boards and Wiring Diagram.
TP1121
Extension Cable
TO CONTENTS
* When repairing or measuring the voltage of this unit, connect with the Extension Cable as shown in below.
<Monitor Unit>
Monitor Ext. Cable 50P+15P
01E35218S01
FRONT PWB
CB7010
CB7011
FPC,MAIN RAD900 PWB
POWER PWB
CB7004
CH7501
PWB Ext. Cable 26 P
01E35219S01
CB7009
CB9102
E. Cable FFC 45P
01E34124S01
CB9501
BE MAIN PWB
Mech Ext. Cable FFC 50P SD
01E25217S01
DISPLAY Unit
DVD-MECH
(DV33M010)
<TUNER Unit>
TO CONTENTS
PWB Ext. Cable 5P
01E35220S01
VISUAL PWB
CB5001
CB5003
PWB Ext. FFC Cable 40P
01E35221S01
CH5003
CH5001
RADIO PWB
MAIN PWB
* Monitor Unit Block
TO CONTENTS
Cabinet Assembly Parts List (Monitor Unit)
DVD Deck Mechanism Assembly Parts List
Electrical Parts List (Monitor Unit)
Contents
Specifications
Block Diagram
Parts Layout on P.W.Boards and Wiring Diagram
Schematic Diagram
Terminal Voltage of IC/TR
Description of IC Terminal
Exploded View (Cabinet)
Exploded View (DVD Deck Mechanism) (DV33M010)
NOTE : Due to continuing product improvement, specifications and designs are subject to
change without notice.
Specifications
<Monitor SECTION>
Screen Size ..................................................................................................................................................... "7" type
Display System ................................................................................................................... Transparent type TN LCD
Drive System ............................................................................................... Low-Temperature p-si TFT active matrix
Number of Picture Elements .......................................................................................... 1,152,000 pcs. (2,400 x 480)
Light Source ................................................................................................................. Cold cathode fluorescent tube
<CD/DVD SECTION>
System ..................................................................................................................................... Optical (DVD System)
(CD AUDIO)
Channel Balance (1kHz, TCD-782) ................................................................................................................... 0±3dB
Distortion (1kHz, TCD-782) ................................................................................................................................. 0.3%
Frequency Response (Ref. 1kHz, TCD-782) ........................................................................................ 17Hz : -2±4dB
127Hz : 0±2dB
10.007kHz : 0±2dB
19.997kHz : -2±4dB
S/N Ratio (TCD-782) ........................................................................................................................................... 80dB
Separation (1kHz, TCD-782) ............................................................................................................................... 65dB
De-Emphasis (Ref. 1kHz, TCD-782) .................................................................................................. 4kHz : -20±3dB
16kHz : -20±3dB
(MP-3 AUDIO)
Channel Balance (1kHz, SCD-4419 (FOLDER4-128kbps)) .............................................................................. 0±3dB
Distortion (1kHz, SCD-4419 (FOLDER4-128kbps)) ............................................................................................ 0.3%
Frequency Response (Ref. 1kHz, SCD-4419 (FOLDER4-128kbps)) ................................................... 17Hz : -2±4dB
127Hz : 0±2dB
10.007kHz : 0±2dB
19.997kHz : -2±4dB
S/N Ratio (SCD-4419 (FOLDER4-128kbps)) ...................................................................................................... 80dB
Separation (1kHz, SCD-4419 (FOLDER4-128kbps)) .......................................................................................... 65dB
(DVD-VIDEO)
*AUDIO PRE-OUT : Title Number 4/Audio Stream 2/LPCM 48k
Channel Balance (1kHz, TDV-540A(NTSC)) .................................................................................................... 0±3dB
Distortion (1kHz, TDV-540A(NTSC)) ................................................................................................................... 0.3%
Frequency Response (Ref. 1kHz, TDV-540A(NTSC)) ......................................................................... 17Hz : -2±4dB
127Hz : 0±2dB
10.007kHz : 0±2dB
19.997kHz : -2±4dB
S/N Ratio (TDV-540A(NTSC)) ............................................................................................................................. 80dB
Separation (1kHz, TDV-540A(NTSC)) ................................................................................................................ 65dB
*VIDEO AUX OUT1 or 2 : Terminating Resistance 75 ohm
Luminance Level (JVC V-509(PAL)) .............................................................................................................. 1±0.15V
Luminance Frequency Response (4.7MHz, JVC V-509(PAL)) ........................................................................ -3±2dB
Luminance Signal S/N Ratio (JVC V-509(PAL)) ................................................................................................. 50dB
TO CONTENTS (MONITOR UNIT)
*AUDIO AUX-OUT : 10K ohm Resistive Load, Audio Test/LPCM 96k
TO CONTENTS (MONITOR UNIT)
Output Level (1kHz, TDV-540A(NTSC)) ................................................................................................. 1.2±0.2Vrms
Channel Balance (1kHz, TDV-540A(NTSC)) .................................................................................................... 0±3dB
Distortion (1kHz, TDV-540A(NTSC)) ................................................................................................................... 0.3%
Frequency Response (Ref. 1kHz, TDV-540A(NTSC)) ......................................................................... 17Hz : -3±3dB
127Hz : 0±2dB
10.007kHz :0±2dB
19.997kHz :-2±4dB
S/N Ratio (TDV-540A(NTSC)) ............................................................................................................................. 80dB
Separation (1kHz, TDV-540A(NTSC)) ................................................................................................................ 65dB
(VIDEO-CD)
*AUDIO : MPEG Audio
Channel Balance (1kHz, TVD-581A(NTSC)) .................................................................................................... 0±3dB
Distortion (1kHz, TVD-581A(NTSC)) ................................................................................................................... 0.3%
Frequency Response (Ref. 1kHz, TVD-581A(NTSC)) ......................................................................... 20Hz : -2±4dB
100Hz : 0±2dB
10kHz : 0±2dB
20kHz : -2±4dB
S/N Ratio (TVD-581A(NTSC)) ............................................................................................................................ 80dB
Separation (1kHz, TVD-581A(NTSC)) ................................................................................................................ 65dB
*VIDEO : Terminating Resistance 75 ohm
Luminance Level (SONY HLV-402(PAL)) ...................................................................................................... 1±0.15V
Luminance Frequency Response (2MHz, SONY HLV-402(PAL)) ................................................................... -2±2dB
Luminance Signal S/N Ratio (SONY HLV-402(PAL)) ......................................................................................... 45dB
<Pickup>
Wave Length .................................................................................................................................................... 668nm
Laser Power .................................................................................................................................................. CLASS II
<GENERAL>
Signal System ............................................................................................................................................ NTSC/PAL
Power Supply ................................................................................................................................................ DC14.4V
Dimensions (W x H x D) ................................................................................................. Chassis : 178 x 50 x 165mm
Nose (Closed) : 170 x 47.3 x 39.7mm
Nose (Maximum Projected Position) : 170 x 47.3 x 176.5mm
Weight ................................................................................................................................................................. 1.7kg
NOTE : Due to Continuing product improvement, specifications and designs are subject to change without notice.
Block Diagram
TO CONTENTS (MONITOR UNIT)
A/D KEY
(TOP)
Tuner Unit
I/F CONN
ROTARY
ENCODER
(ESC)
A/D KEY
(ESC)
A/D KEY
(DF)
OPT SENSOR
RGB
ISOLATOR
IS-BUS I/F
REMOTE
CONTROL
SENSOR
FRONT u-COM
BE-MAIN PWB
DVD-MECHA
(DV33M010)
MOTOR
DRIVER
YC VIDEO AMP
LCD I/F
MECHA I/F
LCD I/F and
SCALER
ACTION-IND
A/D KEY
BACKLIGHT
INVERTER
LOW-TEMPERATURE
SHATTLE-MECHA
(FNC)
p-si LCD
53398-1090
TO CONTENTS (MONITOR UNIT)
TO PARTS LIST
TO P. W. Board
BZ7000
PKM13EPP
Q7000
UN9211J
CB7000
CB7012
53398-1390
R7000
TP7212
DIN7000
ASSY, DIN CABLE D900
1k-1/4
10k
R7001
TP7102
47kx4
RA7000
TP7083
TP7101
TP7003
TP7073
TP7074
TP7075
TP7076
RA7002
1kx4
RA7003
RA7004
1kx4
RA7005
1kx4
TP7146
CB7003
R7071
53398-0390
33
C7014
IC7001
R7006
TP7004
100-1/4
68-1/4
R7004
R7007
ZD7000
100-1/4
R7005
R7002
N.U.
C7002 1000p
68-1/4
C7003 1000p
1k
R7003
R7008
100-1/4
R7010
1k
RLZ7.5A
ZD7001
R7009
100-1/4
RLZ7.5A
10k
R7011
N.U.
R7247
TP7103
TP7005
1000p
C7000
TP7006
TP7007
1000p
C7001
R7248
C7071
0.022
RA7001
1kx4
1kx4
RA7006
1kx4
HA12187FP
N.U.
C7006
ZD7002
C7004 N.U.
RLZ7.5A
IC7002
HA12187FP
N.U.
C7007
ZD7003
C7005 N.U.
RLZ7.5A
TP7008
TP7009
R7250
10k
0
TP7104
R7249
0
1kx4
RA7007
1kx4
RA7008
TP7105
100
R7159
100
R7160
100
R7158
1k
R7013
1
C7009
100
R7012
18p
C7008
XL7000
19.6608MHz
R7210
TP7012
R7015 0
TP7106
1kx4
RA7009
70F3033BYGC
0
R7014
C7010
IC7000
R7016
47k
1M
R7211
C7070
RA7010
18p
IC7003
TC74VHC04FT
R7021 0
TP7015
R7019
2.2k
1M
TP7107
22k
TH7000
22k-F
R7018
10k-F
R7017
1kx4
RA7011
TP7201
0.022
100x4
100x4
RA7012
TP7079
6.2k-F
R7020
C7061 1000p
C7062 1000p
C7063 1000p
C7064 1000p
TP7014
TP7016
TP7017
TP7013
C7065
1000p
C7011
R7022
TP7108
N.U.
C7012
R7024
N.U.
1k
R7025
1k
1k
8.2k-F
R7023
R7029
C7066 1000p
R7026
C7067 1000p
1K
R7027
1K
C7068
0.022
RA7013
1kx4
C7069
0.022
8.2k-F
TP7111
TP7109
TP7110
R7028
TP7022
TP7023
TP7024
TP7025
TP7026
TP7027
RA7014
TP7018
TP7019
TP7020
TP7021
TP7062
TP7113
8.2k-F
1kx4
TP7063
C7078
TP7077
TP7064
R7212
R7199
1
R7198
TP7112
TP7114
TP7065
TP7066
TP7067
0.022-B1E
100k
100k
R7243
TC7WH14FK
1.5k
R7200
Q7034
22k
2SA1576A
Q7033
2SC408
39k
1.8k
R7201
TP7206
0
R7030
R7032
TP7069
TP7070
TP7071
TP7072
TP7068
IC7004
R7031
470-1/4
R7205
2k
R7203
N.U.
TP7036
CB7002
51374-1390
R7202
100
TP7115
TP7116
TP7117
TP7118
TP7119
1.2k
ZD7006
RLZ5.6B
IC7031
TC7W66FU
2SC4081
Q7035
R7204
R7259
560
R7260
560
TP7038
R7252
TP7037
1k
R7174
R7186
10
C7095
C7094
510k
R7062
47k
R7251
47k
18k
47/16
R7166
E7031
E7030
TP7120
C7072
10k
10
R7165
22k
36-1/4
R7162
TP7121
36-1/4
C7076
36-1/4
C7074
TP7122
10
10
39-1/4
R7163
R7176
TP7123
39-1/4
R7175
R7188
39-1/4
R7187
D7003
MA4S159
E7006
220/16
MA4S159
R7164
18k
R7177
R7178
18k
R7189
R7190
D7004
Q7024
2SC4081
47/16
E7033
E7032
10k
22k
Q7027
2SC4081
E7035
47/16
E7034
10k
22k
Q7030
0.022
C7024
TP7124
47/16
R7167
47/16
R7180
47/16
R7192
TP7042
TP7080
D7006
N.U.
R7253
10
510
Q7025
R7168
2SA1576A
820
510
R7179
Q7028
2SA1576A
820
510
Q7031
R7191
2SA1576A
2SC4081
820
TP7205
R7064
2.2-1/4
R7065
2.2-1/4
R7066
2.2-1/4
TP7043
TP7044
R7214
2.2-1/4
R7216
2.2-1/4
R7218
2.2-1/4
0
0.1
C7026
R7063
1k-1/4
R7169
180k
C7073
TP7203
R7181
180k
C7075
TP7204
R7193
180k
C7077
UN9211J
R7261
18p
18p
R7239
Q7004
18p
0
D7005
2SC4081
150
TP7208
TP7209
N.U.
R7254
Q7036
ZD7005
R7173
R7185
R7197
R7074
2.2-1/4
0
R7215
2.2-1/4
R7217
2.2-1/4
R7219
2.2-1/4
R7171
R7170
R7182
R7194
R7195
R7073
2.2-1/4
R7072
100
100
R7183
100
1.2k
R7075
2.2-1/4
N.U.
ZD7004
470
1.2k
470
1.2k
470
MAZS0680L
TC74VHCT08AFT
C7027
0.022
MAZS0560H
Q7026
2SC4081
Q7029
2SC4081
Q7032
2SC4081
TP7045
C7081
IC7007
R7172
R7184
R7196
0.022
1.5k
1.5k
1.5k
TP7129
TP7130
C7031
0.022
C7032
0.1
R7081
75
E7008
220/10
E7009
R7080
220/10
TP7131
C7096
22
TP7132
C7029
0.022
C7030
0.022
C7082
0.022
C7083
0.022
75
TP7128
TP7127
TP7126
IC7006
BA6285AFP
IC7023
BA6285AFP
TP7133
TP7046
TP7047
TP7081
TP7082
C7079
R7206
10
0
N.U.
R7208
R7207
C7080
IC7024
NJM2268V
0
10
1M
R7213
0-1/4
R7093
N.U.
R7209
C7107 47p
TP7134
TP7137
TP7150
C7108
C7109
TP7135
1k
R7094
TP7136
47p
47p
C7110 47p
C7111
R7095
TP7141
47p
TP7159
TP7160
TP7161
TP7157
TP7158
TP7155
TP7156
TP7142
TP7145
TP7164
1k
TP7167
TP7138
TP7139
TP7140
TP7165
TP7166
R7161 0
TP7168
TP7144
TP7151
TP7143
TP7169
Z7002
NFM21HC102R1H
TP7163
Z7003
NFE61PT472C1H
TP7152
TP7153
TP7154
TP7210
C7035 N.U.
F7001
1.6A
TP7170
TP7147
TP7148
TP7149
TP7162
R7104
R7097
0
R7096
0
C7034 N.U.
R7098
0
R7099
0
C7036
N.U.
Z7001
NFM21HC102R1H
Z7004
NFM21HC102R1H
0-1/4
TP7171
TP7172
TP7173
54104-4592
CB7011
51374-1590
CB7010
51374-5090
CB7004
CB7009
TO CONTENTS (MONITOR UNIT)
TO PARTS LIST
TO P. W. Board
TP7174
E7019
3.3/25-T
R7242
1k
TP7175
Q7008
1MH1
R7112
47k
R7101
120k-1/4
C7040
0.022
C7112
0.1
R7103
1k-1/4
R7102
R7106
360k-1/4
56k
R7105
N.U.
IC7013
TDA360AT
R7255
R7256
N.U.
E7024
TP7177
0
Q7009
FMC2
0.47
0.022
C7043
C7060
330/6.3
Q7014
FMC2
47k
R7122
TP7178
Q7015
UMC2N
R7246
47k
R7241
Q7016
0
UN921LJ
R7257
3.9k
R7245
IC7016
S-80935CNMC
18k
TP7181
0.1
C7114
4700p
C7048
IC7025
BA00ASFP
TP7182
R7220
0.33
C7084
R7221
2.2k
R7222
C7051
3.9k
100
IC7018
S-81233SGUP
0.33
0.022
C7085
TP7186
22
0.022
C7106
C7053
TP7183
22
C7103
TP7190
TP7191
TP7211
TP7192
TP7197
TP7198
52745-2090
TP7193
CB7008
0
R7258
TP7215
TP7214
TP7189
IMSA-9856B-26Y
TP7194
TP7195
TP7196
BA00BC0WFP
C7054
IC7028
BA00ASFP
12k
R7229
0.33
C7090
R7230
2.2k
R7231
IC7019
TP7176
6.8k-F
R7138
0.33
820-F
R7139
5.6k-F
R7140
22
0.022
C7055
C7100
IC7029
BA00ASFP
0.33
C7092
R7232
R7233
2.2k
R7234
TP7179
22
0.022
C7091
C7101
0
TP7180
6.8k
22
0.022
C7093
0
C7102
C7088
IC7026
BA00ASFP
C7087
IC7027
BA00ASFP
0.33
1k
22k
R7146
R7148
0.33
R7224
2.2k
R7223
R7226
R7227
2.2k
R7228
22
0.022
C7086
C7104
100
3.9k
100
TP7185
22
22
0.022
C7105
C7089
C7113
TP7184
3.9k
R7225
D7001
DAN202U
TP7188
TP7187
2SA1576A
Q7023
Q7022
UN2211
2200p
C7056
0.01
C7058
3.3k
2.2k
R7147
R7149
0.1
C7057
IC7020 TC4S01F
22k
R7150
R7143 N.U.
Q7020
2SA1735
R7141
27k
R7142
R7144
750-1/4
C7059
R7151
750-1/4
UN921FJ
470k
R7244
Q7019
1
0.022
R7145
TP7199
750-1/4
TP7213
TC7S08F
IC7030
TP7200
L9503
TO CONTENTS (MONITOR UNIT)
TO PARTS LIST
TO P. W. Board
MMZ1608Y152BT
TP9540
TP9541
TP9542
C9537
1000p
C9542
TML9501
OG-363040
0.1
C9573
1000p
C9574
R9612
TP9508
TP9507
TP9506
TP9505
TP9504
TP9503
TP9502
TP9501
TP9509
TP9510
TP9511
TP9512
TP9513
TP9514
TP9515
TP9516
0.1
10k
TP9536
RA9512
100x4
RA9513
100x4
RA9514
100x4
C9533
0.1
IC9502
TC7MZ245FK
C9534 0.1
R9589
R9590
22
22
C9515
0.1
RA9504
L9506
68x4
C9561
0.1
RA9505
68x4
R9554 68
R9555 68
RA9506
C9516
100x4
0.1
C9514
0.1
0.1
C9562
MMZ1608Y152BT
TP9533
R9545 68
R9544 68
R9543 68
R9542 68
R9541 68
R9540 68
R9539 68
R9538 68
R9537 68
R9536 68
R9535 68
R9534 68
R9533 68
R9532 68
R9531 68
R9530 68
R9529 68
R9528 68
R9527 68
R9526 68
R9525 68
R9524 68
R9523 68
R9522 68
R9521 68
R9520 68
R9519 68
R9518 68
R9517 68
R9516 68
C9513
C9512
0.1
0.1
C9511
0.1
C9560
0.1
C9510
0.1
C9509
R9515 68
0.1
C9544 0.1
R9514 68
R9513 68
R9512 68
R9510 68
R9511 68
R9502 N.U.
C9571 0.1
C9545
C9570
0.1
22
R9501
N.U.
C9508
0.1
L9505
MMZ1608Y152BT
C9550
1000p
C9506
C9505
0.1
0.1
R9664
10k
C9507
150p
R9509
22
R9508
68
R9626 10k
R9627 10k
R9628 10k
R9507 100
R9506 100
R9505 100
R9504 100
CB9502
N.U.
CB9501
54104-5092
C9517
RA9507
RA9509
100x4
100x4
C9575
C9519
R9629
0.1
C9518
0.1
0.1
0.1
10k
C9520
0.1
R9592
R9591
4.7k
4.7k
L9530
MMZ1005S121AT
R9671 0
R9672 0
R9673 0
L9531 MMZ1005S121AT
C9526
C9521
0.1
0.1
R9582 100
R9583 100
C9522
0.1
R9585 68
TP9530
L9532
MMZ1005S121AT
R9587 68
RA9510
100x4
RA9511
100x4
RA9508
100x4
RA9515
R9614
100
IC9504
TC7WH126FU
C9535 0.1
RA9516
100x4
RA9517
100x4
10k
R9625
100x4
R9551
IC9503
TC7MZ245FK
R9578 100
R9573 100
C9536
0.1
IC9505
TC7MZ245FK
Q9551
IMH1
4.7k
4.7k
R9552
0.1
C9572
D9551
1SS355
SD9551
MA713
10k
R9633
TP9544
R9616
100
10k
TP9527
TP9519
TP9524
TP9526
TP9525
TP9523
R9640
R9635
TP9543
TP9520
TP9518
TP9521
TP9522
0.1
C9543
N.U.
IC9510
TC7SET08FU
IC9501
ES4428
C9523
0.1
R9650 68
R9588 68
C9524
0.1
C9525
0.1
68
R9663
R9660 68
R9661 68
R9662 68
C9502
C9501
C9504
R9503
0.1
10k
C9503
0.1
RA9521
68x4
RA9520
68x4
0.1
0.1
RA9518
68x4
RA9519
68x4
L9601
TO CONTENTS (MONITOR UNIT)
TO PARTS LIST
TO P. W. Board
MMZ1005S121AT
C9539
1000p
R9622
22
C9538
0.1
TML9201
0G-363040
XL9601
27.000MHz
R9620
R9206
6.8k
R9208
R9207
R9205
6.8k
TP9191
R9190
22k
TML9101
0G-363040
R9105
N.U.
R9104
L9110
C9103
IC9110
0
R9141
22k
R9150
0
0.1
0.1
C9106
IC9102
TC7WH126FU
R9675
1k
0 R9115
0 R9116
0 R9117
0 R9118
R9106
0
R9121 330
R9122 33
R9130 N.U.
R9113 N.U.
R9114 N.U.
R9112 N.U.
R9111 N.U.
R9123 330
R9124 33
0.1
C9107
R9103
22k
C9105 0.1
MMZ1608Y102BT
R9125 33
IC9103
TC7WH126FU
0.1
22
C9104
C9131
10
C9130
L9101
R9140
22k
C9102
0.1
MMZ1005S800AT
IC9111
TC7SET08FU
R9107
22k
R9101
R9102
22k
22k
C9203
0.022
6.8k
6.8k
C9230
N.U.
R9203
2.2
TC7SET08FU
C9132
TP9128
TP9127
TP9126
TP9125
TP9124
TP9121
TP9120
TP9119
TP9118
TP9117
TP9116
TP9115
TP9114
TP9113
TP9112
TP9111
TP9140
TP9110
TP9109
TP9108
TP9107
TP9106
TP9105
TP9104
TP9103
TP9102
TP9101
TP9131
C9133
1000p
1000p
C9120
0.1
TP9130
0.1
C9122
TP9129
C9121
N.U.
CB9102
54104-4592
220
C9831
220
C9832
C9222
1000p
1000p
47
C9221
47
C9205
0.022
C9204
0.022
R9830
TP9190
0
10
C9244
10
C9243
TML9601
0G-363040
0
R9630
R9621
22
0
0.1
22
C9805
C9841
IC9801
MC44722AVFU
0.1
C9806
MMZ1608Y102BT
R9808
1.5k
TML9602
0G-363040
C9813
0.1
C9851
0.1
R9807
1.6k
IC9201
PCM1742KE
L9210
N.U.
R9202
R9201
10
C9241
0.022
C9202
N.U.
R9801
C9840
10
L9801
MMZ1608Y102BT
C9820
0
R9204
C9220
C9242
10
L9201
MMZ1608Y152BT
N.U.
10
C9240
N.U.
0.1
C9201
0.022
R9803
0.1
C9816
R9802 N.U.
C9830 0.022
C9804 0.1
R9806 1.8k
C9803 0.1
R9805 180
C9802 0.1
R9804
180
C9801
0.1
180
C9221
N.U.
R9810
180
C9207
3.3
C9206
3.3
R9811 0
R9809
N.U.
390
R9812
R9210
1.2k
R9212
47k
R9211
47k
R9209
1.2k
R9214
12k
C9209
470p
C9208
470p
R9213
R9815
12k
R9818
C9814
220
2SA1037AK
Q9802
12p
390
R9816
R9814
2SA1037AK
Q9801
390
12p
R9813
IC9202
NJM4580V
R9218
C9214 N.U.
C9215 N.U.
R9217
R9819
0.022
C9812
220
R9817
0.022
C9809
5.6k
5.6k
IC9202
NJM4580V
N.U.
L9803
6.8uH
390
C9810
100p
C9811
C9815
N.U.
L9802
C9807
6.8uH
100p
C9808
C9213
160p
R9216
15k
C9211
120p
47k
R9220
47k
R9219
C9210
120p
R9215
15k
C9212
160p
C9701
TO CONTENTS (MONITOR UNIT)
TO PARTS LIST
TO P. W. Board
C9702
C9703
C9704
C9705
0.1
0.1
0.1
0.1
0.1
22
C9720
0.1
C9721
R9701
N.U.
C9714
0.1
IC9702
MBM29DL800TA–90
IC9701
HY57V641620HGT
C9708
0.1
C9707
0.1
C9706
0.1
IC9703
W24L257Q70LE
TML9701
OG–363040
C9711
0.1
TML9702
OG–363040
R9702
IC9705
TC7SHU04FU
22k
R9710
R9711
R9712
R9713
68
68
68
68
C9722
0.1
C9709
0.1
IC9705
TC7SHU04FU
0.1
C9712
IC9706
TC7SH32F
TP9701
10k
R9703
0.1
C9713
0.1
C9724
22
C9723
0.1
C9710
IC9704
TC74VHCT374AFT
CB8501
TO CONTENTS (MONITOR UNIT)
TO PARTS LIST
TO P. W. Board
IMSA-9631S-50Y
C8547
TP8503
TP8526
TH8501
R8509
22k
L8501
47uH
R8504
820-1/4
C8517
0.15
C8518 N.U.
2SC3518
Q8504
Q8505
2SC3518
R8505
820-1/4
R8502
10-1/4
TP8522
2.7k
Q8502
UN921LJ
R8503
Q8503
UMY1N
0.1
C8511
TP8521
Q8501
TP8507
100p
TP8504
TP8508
C8548
N.U.
100p
100p
C8550
C8549
E8501
10
100/10
E8502
C8504
100/10
UN9212J
7.5k
T8501
BLC216
T8502
BLC216
TP8527
TP8528
CB8504
SM03(7-D1)8
TP8529
LCD7001
LCD,LTA070D010F
CB8502
52745-1090
CB8503
52745-1090
C8555
100p
TP8506
100p
100p
C8552
C8553
TP8502
100p
TP8505
C8554
C8551
TP8517
TP8518
100p
0.1
TP8509
TP8510
TP8511
TP8512
TP8513
TP8514
TP8515
TP8516
TP8560
Z8501
NFM21HC222R1H
L8507
BLM18BD601SH1
R8518 0-1/4
R8519
N.U.
C8503 3900p
C8502
0.039
0.1
C8501
Z8502
NFM21HC222R1H
TP8520
TP8519
BLM18BD601SH1
BLM18BD601SH1
R8501
3.3k
L8508
BLM18BD601SH1
L8509
BLM18BD601SH1
Z8503
NFM21HC222R1H
C8544
10
L8505
L8506
C8506
C8507
0.1
0.1
C8508
C8513
0.1
IC8501
AD9883AKST-110
1
1
C8509
C8505
0.1
0.1
C8510
C8512
L8510
BLM18BD601SH1
TP8523
TP8524
100p
C8541
C8542
0.1
C8515
1000p
C8514
L8512
TP8525
L8511
BLM18BD601SH1
100p
C8543
0.1
C8516
BLM18BD601SH1
100p
C8545
C8519
10
0.1
C8520
TP8501
C8521
0.1
R8506
220
R8507
220
R8508
0.1
220
L8516
TO CONTENTS (MONITOR UNIT)
TO PARTS LIST
TO P. W. Board
BLM18BD601SH1
Z8506
NFE61PT472C1H
4.7k
R8521
N.U.
4.7k
VR8501
R8522
47p
C8576
L8517
BLM18BD601SH1
1
C8540
FH12–30S–0.5S
CB8505
IC8502
TC6398XB
R8514
R8523
47k
BLM18BD601SH1
0.022
C8558
C8564
C8570
C8556
C8557
NFM21HC222R1H
L8515
47p
47p
47p
47p
47p
XL8501
33.231MHz
Z8505
C8559
C8565
C8571
47p
47p
47p
XL8502
27MHz
47p
C8561
C8560
47p
C8566
C8567
47p
C8573
C8572
BLM18PG300SH1
BLM18PG300SH1
C8546
L8503
C8538
L8504
C8539
10
47p
47p
47p
C8563
C8562
47p
47p
47p
C8568
C8569
47p
47p
47p
C8574
C8575
R8512
0
R8513
0
0.022
0.022
Z8504
NFM21HC222R1H
IC8502
TC6398XB
0
L8514
BLM18BD601SH1
HY57V643220CLT–71
C8522
0.01
C8523
0.01
IC8503
C8524
0.01
C8525
0.01
IC8502
TC6398XB
C8526
0.01
C8530
0.01
C8532
L8513
0.01
BLM18BD601SH1
C8528
0.01
Z8507
NFM21HC222R1H
R8510 0
TP8531
R8520 0
0.1
C8534
0.1
0.1
C8536
C8535
C8537
TP8532
TP8533
TP8530
47k
R8511
CB7901
TO CONTENTS (MONITOR UNIT)
TO PARTS LIST
TO P. W. Board
BTB, CAM-C73-016
TP7902
TP7901
TP7903
SW7901
TP7907
TP7904
R7902
R7901
SKQMAJ010
2.2k
1.5k
SW7902
SW7903
SKQMAJ010
SKQMAJ010
TP7908
D7901
MA133
TP7909
R7907
1k-1/4
R7903
3.3k
R7904
5.6k
SW7905
SW7904
SKQMAJ010
SKQMAJ010
R7922
47-1/4
10
IC7901
RS-181
C7902
TP7910
R7905
12k
R7908
1k-1/4
R7906
33k
SW7906
SW7907
SKQMAJ010
SKQMAJ010
IC7902
TPS850
330k
R7909
1
C7903
R7910
47-1/4
0.056
C7901
TP7905
TP7906
1k-1/4
R7928
R7920
LD7909
SML311EB1T
180p
C7904
LD7910
R7927
Q7904
FMC2
1.8k-1/4
R7929
180p
LD7912
LD7913
C7905
R7916
180-1/4
R7917
270-1/4
270-1/4
LD7904
LD7903
BG1111C
BG1111C
LD7907
C7906
180p
LD7905
BG1111C
BG1111C
180p
C7907
R7915
820-1/4
R7925
820-1/4
180p
LD7906
C7908
SML-010PTT87
SML-010PTT87
LD7911
SML-010PTT87
LD7902
BR1111C
SML-010PTT87
180p
C7909
LD7901
BR1111C
C7910
180p
1.8k-1/4
ZD7901 N.U.
SML311EB1T
CB7801
TO CONTENTS (MONITOR UNIT)
TO PARTS LIST
TO P. W. Board
FH12-20S-0.5S
TP7803
TP7802
TP7804
SML-010PTT87
LD7801
R7809
SML-010PTT87
ZD7801
10
220-1/4
R7829
4.7k-1/4
Q7807
UN9212J
4.7
C7805
R7801
47k
R7802
47k
Q7805
UN9212J
ZD7800
RD5.6MB1
TP7806
TP7810
R7804
1k
ZD7802
RD5.6MB1
TP7807
SW7802
SKQYPB
R7803
1k
TP7805
1000p
C7804
RD5.6MB1
C7801
TP7801
LD7802
R7805
SW7801
ENC,EC11B15243
TP7808
TP7809
TP7811
LD7803
SML-010PTT87
Q7808
UN921FJ
1.2k
R7823
1k-1/4
R7824
200
TP7813
TP7812
R7820
620-1/4
R7825
10k-1/4
1.8k-1/4
R7821
1k-1/4
R7822
1k-1/4
R7806
C7802
Q7806
UN9212J
TP7815
R7819
620-1/4
R7810
560-1/4
LD7804
BR1111C
180p
C7803
180p
TP7814
Q7802
UN9212J
CH7802
BTB, CAM-C74-016
TP7503
TO CONTENTS (MONITOR UNIT)
TO PARTS LIST
TO P. W. Board
TP7511
R7512
0–1/4
R7513
0–1/4
R7514
C7505
0–1/4
CB7503
ZD7501
C7508 0.1
C7509 0.1
WTB, 5569–12A1
ZSH5MA27A
0.1
C7506 0.1
C7507 0.1
0
R7524
TP7504
TP7505
CH7501
IMSA–9850S–26Y
R7515
1k
Q7501
IMH1
R7511
47k
R7517
N.U.
Q7502
N.U.
R7516
N.U.
JK7501
JAC,HSJ0857–01–1010+
TP7509
IC7501
BA00ASFP
C7501
BA00BC0WFP
C7502
6.8k
R7505
0.33
R7506
R7507
2.2k–F
IC7502
R7508
0.33
390–F
R7509
R7510
4.7k–F
22
0.022
C7503
C7510
0
TP7501
6.8k–F
22
0.022
C7511
C7504
IC7503
N.U.
TP7510
N.U.
R7521
N.U.
C7512
N.U.
N.U.
C7513
N.U.
R7522
R7523
C7514
N.U.
R7501
2.2–1/4
R7502
2.2–1/4
R7503
2.2–1/4
R7504
2.2–1/4
TP7506
TP7502
TP7507
TP7508
FLAT/SLIDE TILT DOWN
TO CONTENTS (MONITOR UNIT)
TO PARTS LIST
TO P. W. Board
OPEN/CLOSE
/DEMO
R8103
1.2k-F
SW8101
SKQGAC
T. INFO/ANNC. TILT UP MUTE/
R8107
SW8102
SKQGAC
R8106
1.5k-F
SW8103
SKQGAC.
2.2k-F
SW8104
SKQGAC
R8108
3.3k-F
SW8105
SKQGAC
R8109
5.6k-F
DISP. OFF
SW8106
SKQGAC
CB8101
52559-1092
TP8102
TP8101
TP8104
TP8103
TP8107
TP8106
TP8105
Q8101
UN9211J
R8101
UN911HJ
Q8102
R8102
1.2k-F
N.U.
Q8103
N.U.
R8104
180-1/4
R8105
330-1/4
R8110 N.U.
R8113
330-1/4
C8104 180p
LD8101
BG1111C
LD8102
BG1111C
LD8107
BG1111C
ZD8101
C8101 180p
LD8103
BG1111C
C8102 180p
LD8104
BG1111C
LD8108
BG1111C
C8103 180p
LD8105
KB1111FE
MAZS1000M
LD8106
BG1111C
Q8104
UN9211J
CB8201
TO CONTENTS (MONITOR UNIT)
TO PARTS LIST
TO P. W. Board
52745–1090
TP8207
R8201
R8202
1.2k–F
1.5k–F
SW8201
SW8202
SKQGAC
TP8204
F1
TP8203
TP8201
TP8208
TP8209
SKQGAC
F2 F3 F4 F5 F6 F7
TP8205
TP8206
10k
R8207
Q8203
UN9211J
Q8202
UN9211J
SW8203
SKQGAC
UN911HJ
Q8201
R8203
2.2k–F
SKQGAC
R8208
180–1/4
R8209
270–1/4
R8210
270–1/4
SW8204
R8204
3.3k–F
LD8201
BG1111C
R8205
5.6k–F
SW8205
SKQGAC
C8210 180p
LD8202
BG1111C
C8211 180p
LD8204
BG1111C
C8212 180p
LD8206
BG1111C
SW8206
SKQGAC
LD8203
BG1111C
LD8205
BG1111C
LD8207
BG1111C
R8206
12k–F
SW8207
SKQGAC
Loading...