Alpha IH101 Specsheet

Product Specification Sheet APS319 - Rev. 08/2013

IH101 Flush Steel Mounting Box - vertical mountingIH101 Flush Steel Mounting Box - vertical mounting

387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]

Web: www.canalalarm.comWeb: www.canalalarm.com

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

IH101 Flush Ste el Back box IH102 Flush Ste el Mounting Ring

DimensionsDimensions

IH101:

(wall opening required)
Height: 5.63" (144mm)
Width: 4.00" (102mm)
Depth: 1.75" (45mm)

IH102:

(wall opening required)
Height: 5.40" (138mm)
Width: 4.10" (105mm)
Depth: 0.50" (13mm)

IH101 Flush Steel Backbox & IH102 Flush SteelIH101 Flush Steel Backbox & IH102 Flush Steel

Mounting RingMounting Ring

The Alpha Communicat ions® models IH101 and IH102 are flush
steel mounting boxes and rings, made of heavy gauge steel, in a
galvanized finish. T hey are our most popular mounting
accessories, and are used with a variety of flush mount
intercom remote and master stations.

The IH101 is a fully enclosed box, designed to be nailed or screwed
to a mounting stud, or set into concrete or masonry.

Convenient knockouts on the top and bot tom of t he box, make it
easy to at tach to standard electrical EMT box connectors.

The IH102 is an open design mounting ring, designed to be used in
existing sheetrock or panelled walls, where the unit c annot be
mounted onto the stud. As a lower c ost option on new
construct ion, it c an also be nailed or screwed t o a mounting
stud, before the sheetrock is applied.

Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications

The flush back box/ring/housing shall be Alpha Communications® /
TekTone model IH101 or IH102 or approved equal. It shall be made
of heavy gauge st eel, in a galvanized finish. The IH101 shall
contain convenient electrical knockouts on the top and the bot tom
of t he box, to attac h to standard electrical EMT box c onnectors.

The IH102 shall be open in the bac k to allow for equipment
clearance and wiring if needed.

Contractor shall observe all local and national electrical codes.