2003 THRU
2024
Sheet Data 29304F
1 |
16 |
2 |
15 |
3 |
14 |
4 |
13 |
5 |
12 |
6 |
11 |
7 |
10 |
8 |
9 |
Dwg. No. A-9594
Note that the ULN20xxA series (dual in-line package) and ULN20xxL series (small-outline IC package) are electrically identical and share a common terminal number assignment.
ABSOLUTE MAXIMUM RATINGS
Output Voltage, VCE |
|
|
(ULN200xA and ULN200xL) |
........ 50 V |
|
(ULN202xA and ULN202xL) |
........ 95 V |
|
Input Voltage, VIN ................................ |
|
30 V |
Continuous Output Current, |
|
|
IC ................................................. |
|
500 mA |
Continuous Input Current, IIN ........... |
25 mA |
|
Power Dissipation, PD |
|
|
(one Darlington pair)..................... |
|
1.0 W |
(total package) ....................... |
|
See Graph |
Operating Temperature Range, |
|
|
TA .................................. |
-20°C to +85°C |
|
Storage Temperature Range, |
|
|
TS ................................. |
-55°C to +150°C |
HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS
Ideally suited for interfacing between low-level logic circuitry and multiple peripheral power loads, the Series ULN20xxA/L high-voltage, high-current Darlington arrays feature continuous load current ratings to 500 mA for each of the seven drivers. At an appropriate duty cycle depending on ambient temperature and number of drivers turned ON simultaneously, typical power loads totaling over 230 W (350 mA x 7, 95 V) can be controlled. Typical loads include relays, solenoids, stepping motors, magnetic print hammers, multiplexed LED and incandescent displays, and heaters. All devices feature open-collector outputs with integral clamp diodes.
The ULN2003A/L and ULN2023A/L have series input resistors selected for operation directly with 5 V TTL or CMOS. These devices will handle numerous interface needs — particularly those beyond the capabilities of standard logic buffers.
The ULN2004A/L and ULN2024A/L have series input resistors for operation directly from 6 to 15 V CMOS or PMOS logic outputs.
The ULN2003A/L and ULN2004A/L are the standard Darlington arrays. The outputs are capable of sinking 500 mA and will withstand at least 50 V in the OFF state. Outputs may be paralleled for higher load current capability. The ULN2023A/L and ULN2024A/L will withstand 95 V in the OFF state.
These Darlington arrays are furnished in 16-pin dual in-line plastic packages (suffix “A”) and 16-lead surface-mountable SOICs (suffix “L”). All devices are pinned with outputs opposite inputs to facilitate ease of circuit board layout. All devices are rated for operation over the temperature range of -20°C to +85°C. Most (see matrix, next page) are also available for operation to -40°C; to order, change the prefix from “ULN” to “ULQ”.
FEATURES
■TTL, DTL, PMOS, or CMOS-Compatible Inputs
■Output Current to 500 mA
■Output Voltage to 95 V
■Transient-Protected Outputs
■Dual In-Line Plastic Package or Small-Outline IC Package
x = digit to identify specific device. Characteristic shown applies to family of devices with remaining digits as shown. See matrix on next page.
2003 THRU 2024
HIGH-VOLTAGE,
HIGH-CURRENT DARLINGTON ARRAYS
PARTIAL SCHEMATICS
ULN20x3A/L (Each Driver)
COM
2.7K
7.2K 3K
Dwg. No. A-9651
ULN20x4A/L (Each Driver)
COM
10.5K
7.2K 3K
Dwg. No. A-9898A
DEVICE PART NUMBER DESIGNATION
VCE(MAX) |
50 V |
|
95 V |
IC(MAX) |
500 mA |
|
500 mA |
Logic |
|
Part Number |
|
|
|
|
|
5V |
ULN2003A* |
|
ULN2023A* |
TTL, CMOS |
ULN2003L* |
|
ULN2023L |
|
|
|
|
6-15 V |
ULN2004A* |
|
ULN2024A |
CMOS, PMOS |
ULN2004L* |
|
ULN2024L |
|
|
|
|
*Also available for operation between -40°C and +85°C. To order, change prefix from “ULN” to “ULQ”.
INWATTS |
2.5 |
|
|
|
|
|
|
|
|
|
|
2.0 |
|
|
|
|
|
|
|
|
|
||
DISSIPATIONPOWER |
|
|
|
|
|
|
|
|
|
||
1.0 |
|
|
|
|
|
|
|
|
|
||
|
|
|
SUFFIX 'A', R θJA |
= 60°C/W |
|
|
|
||||
|
|
|
|
|
|
|
|
||||
PACKAGE |
1.5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
0.5 |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|||
|
|
SUFFIX 'L', R θJA = 90°C/W |
|
|
|
|
|||||
ALLOWABLE |
|
|
|
|
|
|
|
||||
0 |
|
|
|
|
|
|
|
|
|
||
25 |
50 |
75 |
100 |
125 |
150 |
||||||
|
AMBIENT TEMPERATURE IN °C
Dwg. GP-006A
X = Digit to identify specific device. Specification shown applies to family of devices with remaining digits as shown. See matrix above.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 1974, 1998 Allegro MicroSystems, Inc.
2003 THRU 2024
HIGH-VOLTAGE,
HIGH-CURRENT DARLINGTON ARRAYS
Types ULN2003A, ULN2003L, ULN2004A, and ULN2004L
ELECTRICAL CHARACTERISTICS at +25°C (unless otherwise noted).
|
|
Test |
Applicable |
|
|
Limits |
|
|
|
|
|
|
|
|
|
|
|
Characteristic |
Symbol |
Fig. |
Devices |
Test Conditions |
Min. |
Typ. |
Max. |
Units |
|
|
|
|
|
|
|
|
|
Output Leakage Current |
ICEX |
1A |
All |
VCE = 50 V, TA = 25°C |
— |
< 1 |
50 |
A |
|
|
|
|
VCE = 50 V, TA = 70°C |
— |
< 1 |
100 |
A |
|
|
1B |
ULN2004A/L |
VCE = 50 V, TA = 70°C, VIN = 1.0 V |
— |
< 5 |
500 |
A |
Collector-Emitter |
VCE(SAT) |
2 |
All |
IC = 100 mA, IB = 250 A |
— |
0.9 |
1.1 |
V |
Saturation Voltage |
|
|
|
lC = 200 mA, IB = 350 A |
— |
1.1 |
1.3 |
V |
|
|
|
|
|||||
|
|
|
|
IC = 350 mA, IB = 500 A |
— |
1.3 |
1.6 |
V |
Input Current |
IIN(ON) |
3 |
ULN2003A/L |
VIN = 3.85 V |
— |
0.93 |
1.35 |
mA |
|
|
|
ULN2004A/L |
VIN = 5.0 V |
— |
0.35 |
0.5 |
mA |
|
|
|
|
VIN = 12 V |
— |
1.0 |
1.45 |
mA |
|
IIN(OFF) |
4 |
All |
lC = 500 A, TA = 70°C |
50 |
65 |
— |
A |
Input Voltage |
VIN(ON) |
5 |
ULN2003A/L |
VCE = 2.0 V, lC = 200 mA |
— |
— |
2.4 |
V |
|
|
|
|
VCE = 2.0 V, IC = 250 mA |
— |
— |
2.7 |
V |
|
|
|
|
VCE = 2.0 V, lC = 300 mA |
— |
— |
3.0 |
V |
|
|
|
ULN2004A/L |
VCE = 2.0 V, lC = 125 mA |
— |
— |
5.0 |
V |
|
|
|
|
VCE = 2.0 V, lC = 200 mA |
— |
— |
6.0 |
V |
|
|
|
|
VCE = 2.0 V, IC = 275 mA |
— |
— |
7.0 |
V |
|
|
|
|
VCE = 2.0 V, lC = 350 mA |
— |
— |
8.0 |
V |
Input Capacitance |
CIN |
— |
All |
|
— |
15 |
25 |
pF |
Turn-On Delay |
tPLH |
8 |
All |
0.5 EIN to 0.5 EOUT |
— |
0.25 |
1.0 |
s |
Turn-Off Delay |
tPHL |
8 |
All |
0.5 EIN to 0.5 EOUT |
— |
0.25 |
1.0 |
s |
Clamp Diode |
IR |
6 |
All |
VR = 50 V, TA = 25°C |
— |
— |
50 |
A |
Leakage Current |
|
|
|
VR = 50 V, TA = 70°C |
— |
— |
100 |
A |
|
|
|
|
|||||
Clamp Diode |
VF |
7 |
All |
IF = 350 mA |
— |
1.7 |
2.0 |
V |
Forward Voltage |
|
|
|
|
|
|
|
|
Complete part number includes suffix to identify package style: A = DIP, L = SOIC.
www.allegromicro.com