AKAI ACR-3899 User Manual

ACR-3899

USER MANUAL

MANUAL DE UTILIZARE

DESCRIPTION

1. POWER/FUN

2. HOUR/TU-

3. MIN/TU+

4. SNOOZE/SLEEP/HIGH/LOW/OFF

5. TIME SET/M+

6. AL1/VOL-

7. AL2/VOL+

8. USB SLOT FOR CHARGING

9. EARPHONE JACK

10. AUX IN JACK

11. DC 5V JACK

12. LED DISPLAY

13. HOLE

14. BATTERY DOOR

15. HOLDER

CONNECTING THE RADIO

PLUG THE DC ADAPTOR INLET INTO THE DC 5V JACK (11). WHEN ELECTRICAL POWER HAS BEEN INTERRUPTED AND RESTORED, IF THERE ARE 2 AAA BATTERIES IN THE RADIO AND THE POWER OFF AND ON AGAIN, THE CLOCK DISPLAY WILL SHOW THE TIME. MAKE SURE TO RESET BOTH THE CORRECT TIME AND ALARM TIME FOR PROPER OPERATION.

TIME SETTING

PRESS AND HOLD THE TIME SET/M+ (5), THEN THE CLOCK DISPLAY WILL BLINK. PRESS THE HOUR/TU- (2) OR MIN/TU+ (3) TO SET THE CLOCK DISPLAY TO THE CORRECT TIME. PRESS TIME SET/M+ (5) AGAIN WHEN FINISHED THE SETTING, THE TIME DISPLAY WILL NOT BLINK.

DIMMER HIGH/LOW/OFF

ON TIME DISPLAY MODE, LONG PRESS HIGH/LOW/OFF (4) TO SET HIGH OR LOW OF THE LED DISPLAY OR TURN OFF THE LED DISPLAY.

RADIO OPERATION

LONG PRESS POWER/FUN (1) TO TURN ON THE RADIO. SHORTPRESS POWER/ FUN (1) TO SELECT AM BAND OR FM BAND OR AUX. PRESS HOUR / TU-(2) OR MIN/TU+ (3) TO ADJUST YOUR DESIRED FREQUENCY. PRESS AL 2/VOL + (7) TO INCREASE THE VOLUME, THE MAXIMUM LEVEL UP TO LEVEL 16, THE DEFAULT VOLUME IS 12. PRESS AL 1/VOL- (6) TO DECREASE THE VOLUME, THE MINIMUM LEVEL OF VOLUME IS LEVEL 0.

MEMORY OPERATION

THE CLOCK RADIO CAN STORE 20 AM AND 20 FM PRESETS. ON RADIO PLAYING MODE, SELECT YOUR DESIRED BAND (FM/AM), PRESS UP MIN/TU+ (3) OR HOUR / TU-(2) TO CHOOSE YOUR DESIRED FREQUENCY. PRESS AND HOLD TIME SET/M+ (5) TO ENTER INTO PRESET MODE, THE PRESET NUMBER WILL SHOW AND FLASH ON THE LED DISPLAY. THEN SHORT PRESS HOUR/TU- (2) OR MIN/TU+ (3) TO SELECT YOUR DESIRED MEMORY NUMBERS FROM P1 TO P20. PRESS THE TIME SET/M+ (2) TO CONFIRM YOUR MEMORY SETTING. REPEAT THE ABOVE STEPS, YOU CAN STORE YOUR DESIRED STATIONS. WHEN THE SETTING IS CORRECT, PRESS TIME SET/M+ (5) TO SELECT YOUR PRESET FREQUENCY TO ENJOY RADIO. PRESS POWER /FUN (1) TO TURN OFF THE RADIO.

ALARM FUNCTION SETTING ALARM 1 BY BUZZER

IN CLOCK DISPLAY MODE, PRESS AL 1/VOL- BUTTON (6) ONCE TO SELECT ALARM BY BUZZER. THE AL1 BUZZER ICON AND ALARM TIME DISPLAY WILL FLASH. USING HOUR/TU- BUTTON (2) AND MIN/TU+ BUTTON (3) TO SET YOUR DESIRED ALARM HOUR.

SETTING ALARM 1 BY RADIO

IN CLOCK DISPLAY MODE, PRESS AL 1/VOL- BUTTON (6) TWICE TO SELECT ALARM BY RADIO. THE AL1 RAD ICON AND ALARM TIME DISPLAY WILL FLASH. USING HOUR/TU- BUTTON (2) AND MIN/TU+ BUTTON (3) TO SET YOUR DEISRED ALARM HOUR.

SETTING ALARM 2 BY BUZZER

IN CLOCK DISPLAY MODE, PRESS AL 2/VOL+ BUTTON (7) ONCE TO SELECT ALARM BY BUZZER. THE AL2 BUZZER ICON AND ALARM TIME DISPLAY WILL FLASH. USING HOUR/TU- BUTTON (2) AND MIN/TU+ BUTTON (3) TO SET YOUR DEISRED ALARM HOUR.

SETTING ALARM 2 BY RADIO

IN CLOCK DISPLAY MODE, PRESS AL 2/VOL+ BUTTON (7) TWICE TO SELECT ALARM BY RADIO. THE AL2 RAD ICON AND ALARM TIME DISPLAY WILL FLASH. USING HOUR/TU- BUTTON (2) AND MIN/TU+ BUTTON (3) TO SET YOUR DEISRED ALARM HOUR.

SLEEP FUNCTION

IF YOU WANT TO LISTENING THE RADIO WHILE FALL ASLEEP. YOU CAN USE SLEEP FUNCTION BY SETTING THE SLEEP TIME. WITH THE RADIO ON, PRESS THE SLEEP BUTTON (4) TO ENTER INTO SLEEP MODE. THE 90 No. SHOWS ON THE LED DISPLAY. IT STATES 90-MINUTES OF SLEEP TIME AND TO BE SETTED IN SEQUENCE 9080-70-60-50-40-30-20-10-OFF. PRESS THE SLEEP (4) TO CHOOSE YOUR DESIRED SLEEP TIME, THE SLEEP TIMER WILL CHANGE BY 10 MINUTES EACH TIME YOU PRESS THE SLEEP BUTTON (4). THE UNIT WILL STOP PLAYING WHEN THE TIMER COUNTDOWNS FROM THE PRESET SLEEP TIME TO THE END AND THEN SWITCH OFF BY ITSELF.

SNOOZE FUNCTION

ON ALARM SOUND MODE, PRESS POWER/FUN (1) TO STOP ALARM1 OR ALARM2, THE ALARM WILL NOT RESUME. BUT IF YOU PRESS THE SNOOZE BUTTON (4) TO STOP THE ALARM, THE AL ICON OF THE LED DISPLAY WILL BLINK, AND THE ALARM WILL RESUME AFTER 9 MINUTES.

AUX-IN JACK

FOR CONNECTING TO EXTERNAL PLAYERS, E.G. MP3 PLAYER, SMARTPHONE, TABLET PC ETC.

1. CONNECT THE EXTERNAL DEVICE TO THE AUX-IN JACK WITH A

3.5MM STEREO JACK.

2. PRESS POWER/FUN REPEATEDLY UNTIL “AUX” IS SHOWN ON THE DISPLAY.

3. YOU WILL HEAR THE SOUND PLAYBACK FROM THE EXTERNAL DEVICE THROUGH THE LOUD-SPEAKER. USE THE AL1/VOL- OR AL2/VOL+ BUTTONS TO ADJUST THE VOLUME. THE CONTROL BUTTONS ARE NOT AVAILABLE.

+ 4 hidden pages