AIM TECHNICAL REFERENCES
USER MANUAL
Hand-held digital stopwatch
www.aim-sportline.com
MultiChron
MultiChron
MultiChron
Hand-held digital stopwatch
Hand-held digital stopwatch
Lap number
Split Number
for each lap.
A "b" in this column
means best
recorded time
Buttons for
drivers’ times
SET
RE
PLIT
S
01 25648
01
01
01
99 LAPS
1
SEL
T
S OP-
' ''
1
' ''
25750
1
' ''
1
25452
' ''
30002
1
' ''
30002
' ''
.
.
1 5
00
4
MEMORY 9 SPLITS
2
F
O
CN
-
3
BE T
68
SET
T
O
ST-
ST
ART
LAP
4°
3°
2°
1°
Times for Drivers
2, 3 and 4
Driver 1
Previous Time
Driver 1
Cumulative
Split time
+
Driver 1
Actual Time
4
LLC
A
RE
Options settings
Records up to 9 hours 59 minutes and 59 seconds
Records up to 99 laps with max 9 splits for lap for each driver (a little icon appearing on the top
left corner of the display means memory full)
Shows minutes, seconds and hundreds for the first 30 minutes and hours, minutes and
seconds after
Switches off the display after 30 minutes inactivity
MultiChron is the hand-held AIM “multi-chronometer” that lets you time up to four drivers
simultaneously. You can time and record up to 99 laps for each driver (with up to 9 split times for
each lap).
MultiChron is a flexible instrument that fits any racing situation with two start modes (Multi
Start and One Start) and two recording modes (Multi Key and One key).
1
MultiChron
MultiChron
Hand-held digital stopwatch
Hand-held digital stopwatch
MultiChron timing modes
Start modes: One Start and Multi Start
One Start: allows you to activate the start for the four drivers by pressing one button, typically
used to time a race where all drivers start at the same time.
Multi Start: allows you to activate the timer for each driver independently, in case drivers start at
different times.
Lap and Split recording modes: One Key and Multi Key
Multi key: links one button to one driver. To record lap times of the four drivers press one of the
four numeric buttons (from 1 to 4); button 1 duplicates the START/LAP button. To record split
times press the SPLIT button together with one of the four buttons 1-4. Pressing SPLIT button
without pressing one of the four numerical buttons (1-4) records the first driver split time.
One key: links one button (LAP or SPLIT) to all drivers. By pressing it, all rows related to times start
blinking and continue until you specify which driver by pressing one of the numerical buttons (1-
4) for that driver. This mode is useful when, for example, all the drivers pass within a few seconds
on Start/Finish Line: it is easier and more accurate to press the single LAP button each time a
driver passes, and link later the recorded times to the different drivers. If for instance drivers 3, 1
and 2 pass by in that order, you can record their times by pressing LAP three times (each time a
driver passes) and then press buttons 3, 1 and 2.
One driver timing
If you are timing one only driver, the best mode is the MultiChron default mode, Multi Start /
Multi Key. The timer is ready to use immediately without any configuration. You can use
“Start/Lap” and “Reset/Split” button to record Lap and Split times.
Pause
Press “STOP/SEL” button for about two seconds.
Recall recorded data
Press “RECALL” to show the most recent times for each driver.
Use buttons “1” (-) and “2” (+) to scroll only lap times and buttons “3” (-) and “4” (+) to scroll all
times (lap by lap including split times).
Press “RECALL” button again to leave recall mode.
Best time/Total time
Press “BEST” to show the best lap times of running drivers.
Press ”BEST” 2 times to show total times (adding of all times) for running drivers.
Press “BEST” a third time to switch back to the main page.
Clear data
Stop the chronometer (STOP/SEL) and press the “RESET/SPLIT” button for about two seconds.
Change MultiChron configuration
Press “CONF” button and use “STOP/SEL” button to switch from “KEY” option setting to “START”
option setting and buttons “3/-“ and “4/+” to switch from “Multi” to “One” and vice versa.
(with the chronometer stopped)
(both during the race and after)
(both during the race and after)
(with the chronometer off)
2
© 2007 AIM Srl - Via Cavalcanti, 8 20063 Cernusco sul Naviglio (MI) - Italy
Tel. +39.02.9290571 - info@aim-sportline.com
www.aim-sportline.com
Loading...