Ag Leader PFadvantage Harvest Mode Reference Sheets

PFadvantage

1 Press MENU key until FIELD is displayed. Press

2 Press UP or DOWN ARROW key to scroll to a different

3 To name field:

3a Press RIGHT ARROW key.

3b Press UP or DOWN ARROW to set character.

3c Repeat Steps 3a

-

3b, Name can be 8 characters long.

3d Press ACCEPT key to accept name.

4 To change grain:

4a Press key to right of line displaying grain.

4b Press

UP or DOWN ARROW key to set grain.

4c Press ACCEPT key to accept grain.

5 Press ACCEPT key to create or change field.

1 Press MENU key until LOAD key is displayed. Press

2 Press UP or DOWN ARROW

key to scroll to a different

3 To name load:

3a Press RIGHT ARROW key.

3b Press UP or DOWN ARROW to set character.

3c Repeat Steps 3a

-

3b, Name can be 8 characters lo

ng.

3d Press ACCEPT key to accept name.

4 Press ACCEPT key to create or change load.

1 Press MENU key until CAL is displayed. Press CAL key.

2 Press BOTTOM RIGHT ARROW key until TEMP is

3 Press UP or DOWN ARROW key to set actual temperature.

4 Press PERFORM CAL key to calibrate temperature.

5 Press ACCEPT key to accept calibration.

6 Press EXIT key to return to main operating screen.

1 Press MENU key until CAL key is displayed. Press CAL key.

2 Press BOTTOM RIGHT ARROW key until STOP HGT key is

3 Press UP or DOWN ARROW key to select grain.

4 Press ENTER HEIGHT key.

5 Position header at height to shut

off acre counting.

6 Press SET HEIGHT key. Press ACCEPT key.

7 Press EXIT key twice.

1 Harvest a load of grain.

2 Use reference tester to measure moisture (average many

3 Press MENU key until CAL key is

displayed. Press CAL key.

4 Use UP or DOWN ARROW key to select grain. Press ENTER

5 Press key to right of field. Press UP or DOWN ARROW key

6 Press key to right of line displaying “ACTUAL MOISTURE”.

7 Press PERFORM CAL key. Press ACCEPT key. Press EXIT

NOTE: You must calibrate for each grain type. Calibrating moisture on

Changing/Creating/Naming Fields

STEP ACTION

FIELD KEY.

field. To create a new field, press UP ARROW key until
“CREATE NEW FIELD” is displayed.

Changing /Creating/Naming Loads

STEP ACTION

LOAD key.

load. To create a new load, press UP ARROW key until
“CREATE NEW LOAD” is displayed.

– QUICK REFERENCE SHEET – (HARVEST) November 2002

Calibrating Temperature

STEP ACTION

displayed. Press TEMP key.

Calibrating Stop Height

STEP ACTION

displayed. Press STOP HGT key.

Calibrating Moisture

STEP ACTION

samples).

Revision 1 PN: 2002831-3

Press MOISTURE key.

MOISTURE key.

to change field. Press key to right of load. Press UP or DOWN
ARROW key to change to load that has an actual moisture.

Press UP or DOWN ARROW key to enter actual moisture.

key two times to return to main operating screen.

one load affects all moistures for all loads for that grain type.

PFadvantage

1 Press one of the keys to right of screen. Press I

NST

2 Press key to the right of line displaying Moisture.

3 Use RIGHT ARROW key to select “man”.

4 Press RIGHT ARROW key to set average moisture for

5 Press key to right of line displaying Moisture.

1 Press MENU key until SETUP key is displayed. Press

2 Press SWATH key.

3 Press UP or DOWN ARROW key to select grain.

4 Press EDIT # ROWS key. Press UP or DOWN

5 Press EDI

T SPACING key. Press UP or DOWN

6 Press EXIT key once to return to main operating screen.

1 If swath not displayed, press one the keys to right of

2 Press key to right of line displaying “SWATH”.

3 To view swath by rows, press RIGHT ARROW key to

4 Press DOWN ARROW key to decrease swath to swath

5 Press UP ARROW key to increase swath back to full

4 Deselect swath by pressing key to right of swath.

NOTE: When swath is decreased, the monitor will beep to remind

Ca

librating Grain Weight

1 Change to a load with 0 lbs.

2 With grain tank empty, harvest 3,000 or more lbs into load.

3 Completely empty grain tank into wagon or truck.

4 Change to another load with 0 lbs.

5 Weigh grain in wagon or tr

uck.

6 Repeat Steps 1

-

5. Weigh at least 5

-

6 loads.

IMPORTANT:

7 Press MENU until CAL key is displayed. Press CAL key.

8 Press WEIGHT key. Press UP or DOWN ARROW key

to select

9 Press key to right of field. Press UP or DOWN ARROW key to

10 Press key right of line displaying “Act. We

ight”. Press UP or

11 Repeat Steps 8

-

9 to enter all actual weights. Press EXIT key.

12 Press SHOW CAL LOADS key. Press PERFORM CAL key.

If MAX ERR over 15%

13 Press EXIT key. Press UP or DOWN

ARROW key to select load

If MAX ERR under 15%

14 Press CONTINUE key to run full calibration. You must have 4

15 “AVERAGE ERROR” should be under 3%; “MAX ERROR”

16 If “MAX ERROR” over 5%, remove actual weight for load with

17 Press EXIT key th

ree times to return to main operating screen.

NOTE: You can calibrate after entering each actual weight. You

must

Setting Moisture to Manual or Automatic

STEP ACTION

MOIST key to display moisture.

-- QUICK REFERENCE SHEET – (HARVEST) – November 2002

STEP ACTION

load.

Setting Full Swath

STEP ACTION

SETUP key.

ARROW key to change number. Press ACCEPT key.

ARROW key to change number. Press ACCEPT key.

Setting Partial Swath

STEP ACTION

screen. Press SWATH key.

select “rows”.

being harvested.

swath after harvesting partial swath.

For more accurate results, vary grain flow (vary speed or
swath) for each load.

grain. Press ENTER WEIGHT key.

change field. Press key to right of load. Press UP or DOWN
ARROW key to change load that was weighed.

DOWN ARROW key to set actual weight. Press ACCEPT key.

with highest error over 15%. Press CAL ON/OFF key to
uncheck load. Repeat Steps 11–12 until MAX ERR is under 15%
then proceed to Step 14.

or more actual weights entered to do a full calibration.

should be under 5%.

highest error and perform calibration again.

you it is set on partial swath. The monitor will not stop beeping
until the swath is increased to full swath.

Revision 1 PN: 2002831-3

calibrate for every grain type. Check monitor during harvest season, add
more “Act. Weight” if weight is off. If using weigh wagon, make sure it is
calibrated accurately