Ag Leader PFadvantage Cotton Harvest Reference Sheets

PFadvantage – QUICK REFERENCE SHEET – COTTON HARVEST – February 2003

1 Press MENU key until FIELD is displayed. Press

2 Press UP or DOWN ARROW key to scroll to a different

3 T

o name field:

3a

Press RIGHT ARROW key.

3b

Press UP or DOWN ARROW to set character.

3c

Repeat Steps 3a

-

3b, Name can be 8 characters long.

3d

Press ACCEPT key to accept name.

4 To change cotton calibration set:

4a

Press key to right of

line displaying the calibration set.

4b

Press UP or DOWN ARROW key to set the calibration

4c

Press ACCEPT key to accept the calibration set.

5

Press ACCEPT key to create or change field.

1 Pr

ess MENU key until LOAD key is displayed. Press

2 Press UP or DOWN ARROW key to scroll to a different

3 To name load:

3a

Press RIGHT ARROW key.

3b Press UP or DOWN ARROW to set character.

3c

Repeat Steps 3a

-

3b, Name can be 8 characters long.

3d

Press ACCEPT key to accept name.

4 Press ACCEPT key to create or change load.

1 Press MENU key until C

AL key is displayed. Press CAL key.

2 Press BOTTOM RIGHT ARROW key until STOP HGT key is

3 Press UP or DOWN ARROW key to select cotton calibration

4 Press ENTER HEIGHT key.

5 Position header at height to shut off a

cre counting.

6 Press SET HEIGHT key. Press ACCEPT key.

7 Press EXIT key twice.

1 Press MENU key until SETUP key is displayed. Press SETUP

2 Press VEHICLE key

3 Check to make sure the machine configuration is s

et to the

4 Press EXIT key.

5 Press BOTTOM RIGHT ARROW key until SWATH is

6 Press SWATH key.

7. Select FULL SWATH and press the EDIT key.

8 P

ress UP or DOWN ARROW key to change number. Press

9 If you have uneven row spacing, you can override row

-to-

row

10 Press EXIT key once to return to main operating screen.

Changing/Creating/Naming Fields

STEP ACTION

FIELD key.

field. To create a new field, press UP ARROW key until
“CREATE NEW FIELD” is displayed.

Calibrating Stop Height

STEP ACTION

displayed. Press STOP HGT key.

set.

Setting Full Swath

STEP ACTION

set.

Changing /Creating/Naming Loads

STEP ACTION

LOAD key.

load. To create a new load, press UP ARROW key until
“CREATE NEW LOAD” is displayed.

key.

correct number of rows. Edit and press UP or DOWN
ARROW key if necessary. Press ACCEPT/EXIT key.

displayed.

ACCEPT key.

spacings.

PFadvantage -- QUICK REFERENCE SHEET – COTTON HARVEST – February 2003

1 If swath not displ

ayed, press one the keys to right of

2 Press key to right of line displaying swath.

3 To view swath by rows, press RIGHT ARROW key to

4 Press DOWN ARROW key to decrease swath to swath

5 Press UP

ARROW key to increase swath back to full

4 Deselect swath by pressing key to right of swath.

NOTE: When swath is decreased, the monitor will beep to remind

1 Change to a load with 0 lbs.

2 With picker basket empty, harvest 3,000 or more lbs into load.

3 Completely empty picker basket into wagon or truck.

4 Change to another load with 0 lbs.

5 Weigh cotton in wagon or truck.

6 Repeat Steps 1

-

5. Weigh at least 3 loads.

7 Press MENU until CAL key is displayed. Press CAL key.

8 Press WEIGHT key. Press UP or DOWN ARROW key to select

9 Press key to right of field. Press UP or DOWN ARROW key to

10 Press key right of line displaying “Act. Weight”. Press

UP or

11 Repeat Steps 8

-

9 to enter all actual weights. Press EXIT key.

12 Press SHOW CAL LOADS key. Press PERFORM CAL key.

If MAX ERR over 15%

13 Press EXIT key. Press UP or DOWN ARROW key to

select load

14 “AVERAGE ERROR” should be under 5%; “MAX ERROR”

15 If “MAX ERROR” over 10%, r

emove actual weight for load with

16 Press EXIT key three times to return to main operating screen.

NOTE: You can calibrate after entering each actual weight. You

must

Setting Partial Swath

STEP ACTION

screen. Press SWATH key.

select “rows”.

being harvested.

Calibrating Seed Cotton Weight

STEP ACTION

swath after harvesting partial swath.

you it is set on partial swath. The monitor will not stop beeping
until the swath is increased to full swath.

calibration set. Press ENTER WEIGHT key.

change field. Press key to right of load. Press UP or DOWN
ARROW key to change load that was weighed.

DOWN ARROW key to set actual weight. Press ACCEPT key.

with highest error over 15%. Press CAL ON/OFF key to
uncheck load. Repeat Steps 11–12 until MAX ERR is under 15%
then proceed to Step 14.

should be under 10%.

highest error and perform calibration again.

calibrate for every cotton calibration set. Check monitor during harvest
season, add more “Act. Weight” if weight is off. If using weigh wagon,
make sure it is calibrated accurately