APDV-1012 Manual
Optical lens for Video & Picture taking.
A 3.7V Li-ion rechargeable battery provided.
For fixing the DV to tripod.
Flash strobe activates when indoor or dark environment pictures
taken. The best flash distance is within 5 feet (1.5m).
LCD shows images, video clips, camera Settings and Menu.
Speaker for video playback
Pressing and hold the power button to turn the unit on & off. Or press
the button once to set LCD display off, press again to display on.
Press to enter the Playback PICTURE mode,
press again to Playback VIDEO mode.
Press to Set PICTURE / VIDEO recording options.
Press this button to select mode: PICTURE taking or VIDEO
recording.
In MENU mode, push the key up for UP selection / In VIDEO or
PHOTO mode, push the key UP to enter AF mode setting.
In MENU mode, push the key down for DOWN selection / In VIDEO
or PHOTO mode, push the key DOWN to enter White Balance setting.
In MENU mode, push the key left for LEFT selection / In PHOTO
mode, push the key LEFT for flash options selection.
In MENU mode, push the key right for RIGHT selection / In VIDEO
or PHOTO mode, push the key RIGHT to enter exposure value
setting.
To confirm changes (OK) in menu mode.
Zoom / Volume
setup button
Zoom IN or OUT during recording mode./ Setting the volume in video
playback mode.
Red light--The battery is recharging.
Blue light-- the unit turned on.
Press this button to take still PICTURE;
to Start or Stop recording VIDEO clip,
Use supplied TV cable for video and audio connection to standard TV.
Use supplied HDMI cable for HDTV connection.
1. For transferring images and video files to computer via USB cable.
2. For connecting the AC Charger / charging battery
Photograph mode.
Video mode.
Photo-3MP, 5MP
Video- Full HD, 1080P30, 720P30, WVGAP60,
WVGAP30, VGA, QVGA
Flash indicator
(PHOTO mode
only)
Fill in flash: Flash will be always active regardless of
scene brightness
Auto Flash: The camera determines when the flash
should be activated or not.
No Flash : The flash is turned off.
Battery is full
Empty battery
The SD card is inserted and will be used as storage for
PHOTO and VIDEO
Shows available time for recording VIDEO
Shows active recording VIDEO time
Shows picture available in PHOTO mode
PHOTO setting
In photo mode, press the MENU button and select PHOTO, then press OK to enter photo setup
mode.
Super Fine(Default) / Fine
/Normal
Self-timer selected, 10 sec delay
Turn off the self-timer, disable
Single or 3 continues photos selection
VIDEO setting
In video mode, press the MENU button and select VIDEO, then press OK to enter photo setup
mode.
Super Fine(Default)/ Fine /
Normal
Setup
In photo/video mode, press the MENU button and select SETUP by pushing the Direction Key to
right, then press OK to enter camera basic setup options.
American and Japanese TV format
Auto power off in 1 min if no operation
Auto power off in 3 min if no operation
Auto power off in 5 min if no operation
Year / Month / Day / Hour /
Minute
Setting the time on the image or video clips.
Refresh the default settings
English / Deutsch / French
/Italian/Spanish /
Portuguese / CHS / CHT/
Russian
Off / Date/ Time /
Date & Time
In photo/video playback mode, the Date,
Time or the date and time Show on the
image or video clips.
Setting the beep sound volume.
Effect
In photo/video mode, press the MENU button and select EFFECT by pushing the Direction Key
to right, then press OK to enter effect options.
Set for European electricity frequency
Set for American electricity frequency
Scene contrast setting options
White balance selected for Sunny sky
White balance selected for cloudy sky
White balance selected for fluorescent indoor
light
White balance selected for tungsten indoor
lighting
0, +/-0.3 , +/-0.7, +/-1.0,
+/-1.3, +/-1.7, +/-2.0
1. Key features of your camcorder
Full HD digital video camcorder – 1920x1080 up to 30fps
HDTV HDMI high definition interface output
3.0” fine grade LTPS color LCD display
Slot for SD Memory card, support up to 32GB SD card capacity
Driver free for Windows 7 / Vista / XP and MAC 10.4.9 or above
2. Functional parts
Note: The camera will remain in the last setting when it is turned OFF and ON again
5. Using the camera
5.1 Battery installation and charging ( included )
The battery is not fully charged at shipment and must be fully charged before any operation.
1. Release and open the battery door.
4. Details for camera setting
2. Install supplied 3.7V Li-ion battery into the battery compartment
Align battery terminals with metal connectors inside compartment
3. Close the battery door.
4. Open connectors‟ cover and connect supplied AC charger to camera USB port.
5. Turn the camera OFF and plug charger into wall power outlet.
6. A red LED indicator will light up during charging, it will turn OFF when completed.
5.2 Inserting a memory card ( not included )
You must insert SD Card (not supplied) to record and store your VIDEO and PICTURES.
Follow the instruction for inserting a SD Memory card:
1. Turn OFF the camera.
2. Insert the SD card into the SD card slot, gently press it down until card is latched. Make
sure that the SD card is not in LOCK position (see tiny slider on card‟s side).
Note: Do not force the card into the slot; forcing may damage camera and the SD memory card.
Align SD card position (as marked) and try again.
Note: The SD memory card must be formatted before taking photographs.
See the following instruction.
3. Explanation of the status icons
5.3 Formatting the SD memory card
If your SD card is new, or it was used with other cameras or devices, you need to FORMAT the
card, see simple steps below. If card was previously used, save all needed images & video first.
1. In photo/video mode, press the MENU button and select SETUP, then press OK to enter
camera basic setup options.
2. Select FORMAT by pushing the Direction Key DOWN and press OK.
Select YES by pushing the Direction Key DOWN.
3. Press OK to confirm formatting the SD card.
Note: During formatting of the SD card, all data, pictures & video (if present) will be erased;
make sure you save your valuable records before formatting the memory.
Remember, all your records will be erased during formatting!
5.4 Setting the resolution
Press this key to enter Playback PICTURE mode, press again
switching to Playback VIDEO mode.
Press this key to select mode: PICTURE taking or VIDEO
recording.
In MENU mode, push the key up for UP selection / In VIDEO
or PHOTO mode, push the key UP to enter AF mode setting.
Press to Set PICTURE / VIDEO recording options.
In MENU mode, push the key left for LEFT selection / In
PHOTO mode, push the key LEFT for flash options selection.
In MENU mode, push the key down for DOWN selection / In
VIDEO or PHOTO mode, push the key DOWN to enter White
Balance setting.
Press it to delete the photo or video clip in playback mode.
During video playing, press the button for fast backward, press
this key again to return normal playback.
Press this key to increase volume during video clip playback.
In DC playback, PICTURE taking or video recording mode,
press the key to zoom in the picture
Press this key to decrease volume during video clip playback.
In DC playback, PICTURE taking or video recording mode,
press the key to zoom out the picture
Selecting and setup confirm
In MENU mode, push the key right for RIGHT selection / In
VIDEO or PHOTO mode, push the key RIGHT to enter
exposure value setting.
Press the key to stop during playing
During playing, press the key to pause, Press this key again to
play continuously.
During video playing, press the button for fast forward, press
this key again to return normal playback
5.0 Mega pixel CMOS sensor
Full HD (1920×1080) up to 30fps
1080P30 (1440x1080), up to 30fps
720P30 (1280x720), up to 30fps
WVGAP60 (848x480), up to 60fps
WVGAP30 (848x480), up to 30fps
VGA (640x480), up to 30fps
QVGA (320x240), up to 30fps
5.0 Mega pixel (2592x1944)
3.0 Mega pixel (2048x1536)
Macro mode: 3cm~1M(Wide,3cm~20cm; Tele, 0.8M ~1M);
Normal mode:20cm~∞(Wide,20cm~∞;Tele, 1M ~∞);
Full mode: 3cm~∞(Wide,3cm~∞;Tele, 0.8M ~∞);
Zoom in up to 20 times (5 X Optical Zoom and 4 X digital Zoom)
3.0” fine grade LTPS color LCD display
Auto / Sunny / Cloudy / Fluorescent / Incandescent
Support up to 32GB SD memory card ( card is required to store video &
pictures, class 4 or above SD card is recommended )
VIDEO: MOV ; PICTURE: JPEG
3.7V 1700mAh Li-ion rechargeable battery (supplied)
High Definition VIDEO: HDMI
Standard TV (NTSC or PAL) output: AV standard port
Windows 7 / Vista / XP
Mac 10.4.9 or above
Pentium III/ 1GHz (minimum)
Pentium 4 / 3.0GHz or above processor (recommended)
At least 256MB (minimum) 1GB (recommended)
nVidia Geforce 7600 or ATI X 1600 or above
Cannot turn the camcorder
ON
Low battery power.
Battery not inserted
properly.
Charge the battery
Check that battery correctly aligned
when installed
VIDEO or PICTURES
cannot be saved when you
are taking them.
1. SD card has not been
installed
2. The SD card has not
been formatted properly.
3. Memory is full. Display
shows „MEMORY FULL‟.
1. Install SD card
2. Format the SD card at SETUP
mode of the camera. Please refer
to section 5.3.
3. Download the pictures and
videos from the camera to the
computer to create storage
space.
Computer does not
recognize your camcorder
when connected. (You
cannot find removable disk)
Make sure all cable connections are
secured. Restart the computer if
necessary.
The battery life is very
short.
Incorrect or old, used up,
battery
Replace with new 3.7V Li-ion
rechargeable battery
1. The HD camera is not
held steady during
recording
2. The lens of HD DV
camera is dirty.
3. Incorrect Lens focus
setting
1. Hold the HD DV camera steady
when taking pictures, wait to hear
the beep sound
2. Clean the lens with soft dry cloth.
3. Set the Full Macro / Normal lens
focus according to the proper
camera to subject distance. Use
“Normal” setting as appropriate
for typical situations.
VIDEO recording mode
1. Press the MENU button in video mode,Select VIDEO and press OK to enter options
selection.
2. Select RESOLUTION by pushing the Direction Key DOWN, then press OK to enter
resolution selection.
3. Select desired resolution by pushing the Direction Key UP or DOWN;
Full HD (1920×1080), 1080P30(1440x1080), 720P30 (1280 x 720), WVGAP60 (848 x 480)
WVGAP30 (848 x 480), VGA (640 x 480), QVGA(320 x 240)
then press OK to confirm setting.
PICTURE taking mode
1. Press the MENU button in photo mode, Select PHOTO and press OK to enter option
selection.
2. Select the SIZE by pushing the Direction Key DOWN, press OK to enter resolution
selection.
3. Select desired resolution by pushing the Direction Key UP or DOWN;
3M (2048 x 1536), 5M (2592 x 1944)
then press OK to confirm setting.
5.5 Taking video or pictures
1. Open screen / turn on your camera.
2. Press the MODE button to select PICTURES ( ) or VIDEO recording mode( )
3. Use the LCD screen as a viewfinder composing the scene.
4. Press the REC button for taking a PICTURE, or press this button to start / stop VIDEO
recording.
Note: 1. Keep camera and the object steady when making records to avoid blurry images.
2. Max video file size is 4GB.The unit will stop recording automatically.
5.6 Zoom IN and OUT
Your camera can zoom in up to 20 X (5 X optical zoom and 4 X digital zoom).
Push the zoom button LEFT/RIGHT for selecting desired scene / view.
Note the zoom bar in screen showing the zooming range.
5.7 Playback PICTURES and VIDEO clips
1. Press the PLAYBACK button ( ) once to enter PICTURES Playback mode, press it
again to enter VIDEO Playback mode (PHOTO / VIDEO icon will be showed on top of
screen).
2. Push the Direction Key UP / DOWN / LEFT / RIGHT to select desired PICTURE / VIDEO.
3. Press OK to confirm selected VIDEO or see full size PICTURE.
4. When viewing a photo, you may push (left) or (right) to zoom out or in.
5. Press OK again for starting the slide show.
6. When viewing video clips, Press OK to start playing the video and press again to pause.
7. When playing the video, push the Direction Key RIGHT / LEFT for fast forward or rewind
the VIDEO.
5.8 Delete photographs and video clips
1. Press the PLAYBACK( )button once to enter the PHOTO playback mode, or press
again to enter VIDEO clip playback mode.
Select the photo or video to delete.
2. Press the MENU button to enter the delete mode.
3. Push the Direction Key LEFT or RIGHT for select delete current image or delete all images
and press OK to confirm.
4. Press the MODE button to exit.
6. Connecting the HD DV camera
6.1 Connect to TV
When you wish to view on High Definition (HD) TV, please use supplied HDMI cable and
connect as shown below:
Set your HDTV to corresponding HDMI INPUT (review TV Manual if needed) and use camera
buttons in the same way as you use camera during PLAYBACK mode.
You may also view PICTURES and recorded VIDEO clips on typical standard TV set. Make the
connection as shown below:
6.2 Connect to Personal computer
You may also connect your HD camcorder to PC for viewing PICTURES and VIDEOS on your
computer .
Upload to YouTube
Please install MEDIAIMPRESSION. This software enables upload to YouTube. This will take you
directly to YouTube website for easy upload of videos.
Installing DirectX and ArcSoft MediaImpression
1. Please insert provided CD into computer‟s CD ROM and follow screen prompts to install
DirectX and MediaImpression in your computer
2. Use the USB cable to connect HD camcorder to computer
3. Open My Computer> Removable Disk and select image or video file
4. Click to open and watch High definition video played back.
You may also install QuickTime (not bundled on supplied CD) or other suitable programs for
best video playback.
HD Video data is very complex; use Win XP, Vista, Mac9.x and newer computers – older and
slower computers may not play your HD Video clips so well.
7. Remote functional parts (Optional)
9. PC system min requirement
10. Troubleshooting
8. Specification
For EU only
AM-V55B5-GB-AGF-R