Please read these user instructions carefully and keep them to refer to
later.
Please pass the user instructions on to any future owner of the appliance.
The following symbols are used in the text:
1Safety instructions
Warning! Information that affects your personal safety.
Important! Information that prevents damage to the appliance.
Please comply with these instructions. If you do not, any damage re-
3
sulting is not covered by the warranty.
5 This appliance conforms with the following EU Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending
Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Correct use
• This appliance should be used only for normal domestic cooking and
frying of food.
• The appliance must not be used as a work surface or as a storage surface.
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials
or fusible objects (e.g. plastic film, plastic, aluminium) on or near the
appliance.
Children’s safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
• To avoid small children and pets unintentionally switching the appli-
ance on, we recommend activation of the child safety device.
General safety
• The appliance may only be installed and connected by trained, registered service engineers.
• Built-in appliances may only be used after they have built in to suitable built-in units and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches or splits), the appliance must be switched off
and disconnected from the electrical supply, to prevent the possibility
of an electric shock.
• Repairs to the appliance must only be carried out by trained registered service engineers.
4
Safety during use
• Overheated fats and oils can ignite quickly. When cooking with fat or
oil (e.g. chips) do not leave the appliance unattended.
• There is the risk of burns from the appliance if used carelessly.
• Remove stickers and film from the glass ceramic.
• Cables from electrical appliances must not touch the hot surface of
the appliance or hot cookware.
• Switch the cooking zones off after each use.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or
high-pressure cleaning equipment is not permitted.
How to avoid damage to the appliance
• The glass ceramic can be damaged by objects falling onto it.
• The edge of the glass ceramic can be damaged by being knocked by
the cookware.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if pushed across the surface.
• Objects that melt and things that boil over can burn onto the glass
ceramic and should be removed straightaway.
• To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans to boil dry.
• Do not use the cooking zones with empty cookware or without cookware.
5
Description of the Appliance
Cooking surface layout
Singlecooking zone
1200W
Triple ring cooking zone
1050/1950/2700W
Double ring
cooking zone
700/1700W
Control panel layout
Outside ring
On/Off
Double ring pi-
lot light
Heat setting selec-
tion
On/Off
6
Control panel Multi-purpose zone
Triple ring pilot
Middle /outside ring
On/Off
Display
light
1400/2200W
Lock
Display
Timer
Outside ring
On/Off
Multi-purpose
zone pilot light
Heat setting selec-
tion
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions
are controlled by touching sensor fields and confirmed by displays and
acoustic signals.
Touch the sensor fields from above, without covering other sensor
fields.
Sensor fieldFunction
On / OffTo switch the appliance on and
off
Increase settingsIncreasing heat setting/time
Decrease settingsDecreasing heat setting/time
TIMERTimerTimer selection
LockLocking/unlocking the control
panel
Triple ring switchTo switch outer rings
on and off
Double ring switchSwitches outside ring
on and off
Multi-purpose zone
switch
To switch the outside ring on and
off
7
Displays
Display Description
¾ Cooking zone is switched off
u Keep warm settingKeep warm setting is set
¿ - ÇHeat settingsHeat setting is set
2 - 6 Heating setting plus
decimal point
a Automatic warm up
function
e FaultMalfunction has occurred
h Residual heatCooking zone is still hot
l Child safety deviceLock/child safety device is en-
_ Safety cut-outSafety cut-out has been activated
Intermediate heat setting is set
Automatic warm-up function is
activated
gaged
Residual heat indicator
1Warning! Risk of burns from residual heat. After being switched off,
the cooking zones need some time to cool down. Look at the residual
heat indicator
h.
3Residual heat can be used for melting and keeping food warm.
8
Operating the appliance
Switching the appliance on and off
Control panelDisplayPilot light
Switch onTouch for 2 seconds ¾ / h lights up
Switch offTouch for 1 second h / none goes out
3After switching on, within approx. 10 seconds a heat setting or a func-
tion must be set, otherwise the appliance automatically switches itself
off.
Setting the heat setting
Control panel Indicator
To increaseTouch u to Ç
To decreaseTouch Ç to ¾
To switch offTouch and at the same time¾
3The keep warm setting u lies between ¾ and ¿. It is used to keep
food warm.
Switching the outside ring on and off
By switching the outside rings on or off, the effective heating surface
can be matched to the size of the cookware.
3Before an outside ring can be switched on, the inside ring must be
switched on.
Triple cooking zoneSensor panelPower indicator
To switch on middle ringTouch for 1-2 seconds.One power indicator is lit.
To switch on outside ringTouch for 1-2 seconds.
Two power indicators are
lit.
9
Triple cooking zoneSensor panelPower indicator
To switch off outside ring Touch for 1-2 seconds.
To switch off middle ringTouch for 1-2 seconds.
Double ring cooking zoneSensor fieldPilot light
To switch on outside ringTouch for 1-2 secondsis lit
To switch off outside ringTouch for 1-2 secondsgoes out
Roasting zoneSensor panelPower indicator
To switch on outside ring
To switch off outside ring Touch for 1-2 secondsgoes out
Touch for 1-2 sec-
onds
Second power indicator
goes out.
First power indicator goes
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can
be locked at any time in order to prevent the settings being changed
e.g. by wiping over the panel with a cloth.
out.
is lit
Control panelDisplay
Switch onTouch l (for 5 seconds)
Switch offTouch previously set heat setting
3When you switch the appliance off, the locking function is automati-
cally switched off.
10
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.