It has a minimum of 465 mm and a maximum of 620 mm from the wall unit to the work bench.
The hood that is designed for the European version uses 230V fixed supply line with plug earth connected but the great Britain version is 240V.
It has an absorbed power of 260 W and features two motors at 110 W each.
This particular hood incorporates two 20 Watt halogen bulbs as its light source.
The maximum power of the suction in the extractor version is 604 m³/h.
The activated carbon filter needs to be replaced roughly every 120 working hours.
No. The activated carbon filter should be replaced and never cleaned or reused.
Unplug the hood from the power source and then plug it back in to see if it rectifies the issue, otherwise consult Technical Assistance Service if the issue persists.
Yes, a metal grease filter needs to be thoroughly cleaned if it was not done before an activated carbon filter was fitted as this is very essential.