Specifications and Main Features
- 860D, 8609D- Model Number
- 860D, 8609D- Weight
- 350 x 585 x 410 mm - Dimensions For 860D
- 350 x 865 x 410 mm - Dimensions For 8609D
- 860D: 240V~ (UK Version), 8609D: 220V~ (European Version) – Connecting Voltage
- 79 Watts – Combined Power
- 860D and 8609D Shown as Fluorescent Lamps with 1 x 15 W and 1 x 16 W – Fluorescent Power
- Comes With 140, 240, 290, 360 mm/h Return Air Together With 1,2,3,4 Settings, as well as Over 360, 520, 400 Setting 1,2,3,4 Interchangeable Output Output Includes Exhaust Air: -
- 125 mm – Air Outlet
- Filter Activated, Exhaust, and return air modes – Functioning Modes
- Filters which are removable to trace control light switch, several blower settings, and simpler upkeep and maintenance management – Key Features
Frequently Asked Questions
- Q: Does the installation height change with different types of cookers? If yes, what are the exact measurements?
A: For both electric and gas cookers, the recommended installation height stands at 650mm, while electric and gas fired cookers have an elevation of 700mm.
- Q: How much time should pass before cleaning of the metal fat filter?
A: Under normal circumstances, the metal fat filter requires a clean every 6 to 8 weeks.
- Q: What is the ideal time after which active carbon filters should be changed?
A: After an active carbon filter has been used for a year, it is best to dispose of it and buy new ones.
- Q: If I want to operate in return air mode, is the fume extractor hood suitable for this?
A: Sure, with the use of active carbon filters, (KL 600) a fume extractor hood can be used for return air mode as well.
- Q: What is the procedure I should follow when I encounter a malfunction with the appliance?
A: Once a malfunction occurs, reach out to the service center along with the E-No., model designation and the F-No. all of which can be located on the nameplate of the respective appliance.
- Q: What is the process I should follow in order to change the fluorescent lamp?
A: Disconnect the device from its power supply, take the old light bulb out and insert a new one while making sure to apply the light cover, replace the lamp, and this time and ensure the right wattage was used (860D uses 15 W and 8609D makes use of 16 W)
User Manual
Loading...