Q1: What means the type of installation of this hood which is supported?
A1: Depending on the requirements, the hood can work either through an external evacuation or can be converted to work through an activated carbon filter for an internal recirculation.
Q2: What is the suggested timeframe for cleaning the metal grease filters?
A2: The recommendation is to clean the blades after every 4 week use.
Q3: What type of light bulbs does the hood use?
A3: This model uses 2 x 20 Watt Halogen lamps in the design.
Q4: Is there a recommended minimum distance from the cooker to the hood?
A4: Let me advise you that the clearance for electric cooker is 465 mm, for gas cooker is650 mm and for coal and oil 700 mm.
Q5: How do I operate the fan speed?
A5: To change the speed on the fan use the sliding switch on the control console.
Q6: How often should the activated charcoal filter be replaced?
A6: Changing the filters of the installed activated charcoal filter to a new one can be carried out after intervals of four month use.
Q7: What should I do if the hood fails to operate correctly?
A7: Such problems always occur, when it does, first remove the appliance from the mains supply for about 5 seconds and then try again after plugging it back in. If it does not operate as intended contact for technical assistance