Specifications and Main Features
- Model: Contained Fume Extraction Hood
- Net Weight: 13.4 kg
- 270 Watts Absorption Power:
- Electric Motor: 2 Units 110 Watts
- Lighting: Two halogen lamps of 20 Watts each
- Dimensions (Height x Width x Depth):
- 387 mm x 598 mm x 275 mm (excluding the front panel)
- Front cover: 20 mm
- Length Flange: 120 mm
- Cable Length: 120 cm
- Fan Power:
- For Extractor:
- Minimum: 172 m³/h
- Maximum: 368 m³/h
- Rated: 489 m³/h
- For Filter:
- Minimum: 110 m³/h
- Maximum: 225 m³/h
- 270 m³/h
- Flange Diameter: 120 mm
- What It Can Do:
- External evacuation or internal recycling with carbon filtration.
- Dual motor with variable speed.
- Timer and turbo settings.
- Moveable panels with automatic set and unset buttons.
- Safety Guidelines: Provide safety guide to users, electricians and kitchen installers related to usage and installation.
Frequently Asked Questions
Q1: What means the type of installation of this hood which is supported?
A1: Depending on the requirements, the hood can work either through an external evacuation or can be converted to work through an activated carbon filter for an internal recirculation.
Q2: What is the suggested timeframe for cleaning the metal grease filters?
A2: The recommendation is to clean the blades after every 4 week use.
Q3: What type of light bulbs does the hood use?
A3: This model uses 2 x 20 Watt Halogen lamps in the design.
Q4: Is there a recommended minimum distance from the cooker to the hood?
A4: Let me advise you that the clearance for electric cooker is 465 mm, for gas cooker is650 mm and for coal and oil 700 mm.
Q5: How do I operate the fan speed?
A5: To change the speed on the fan use the sliding switch on the control console.
Q6: How often should the activated charcoal filter be replaced?
A6: Changing the filters of the installed activated charcoal filter to a new one can be carried out after intervals of four month use.
Q7: What should I do if the hood fails to operate correctly?
A7: Such problems always occur, when it does, first remove the appliance from the mains supply for about 5 seconds and then try again after plugging it back in. If it does not operate as intended contact for technical assistance
User Manual
Loading...