AEG-Electrolux 68001K-MN 79F User Manual

68001K-MN

Ceramic glass induction hob

Table de cuisson vetrocéramique à induction

Glaskeramische inductie-kookplaat

Installation and Operating Instructions

Instructions de montage et mode d’emploi

Montage- en gebruiksaanwijzing

Dear Customer,

Please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appliance.

The following symbols are used in the text:

1 Safety instructions

Warning! Information that affects your personal safety. Important! Information that prevents damage to the appliance.

3 Useful tips and hints

2 Environmental information

Contents

Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Description of the Appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Touch Control sensor fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Operating the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Switching the appliance on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Setting the heat setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Switching the STOP+GO function on and off. . . . . . . . . . . . . . . . . . . . . . . . . 9

Using the automatic warm-up function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Locking/unlocking the control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Switching the power function on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Using the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Tips on Cooking and Frying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Cookware for induction cooking zones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Tips on energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Examples of cooking applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Operating Instructions

1 Safety instructions

Please comply with these instructions. If you do not, any damage re-

sulting is not covered by the warranty.

5 This appliance conforms with the following EU Directives:

– 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending

Directive 92/31/EEC

– 93/68/EEC dated 22.07.1993 CE Marking Directive

Correct use

• This appliance should be used only for normal domestic cooking and frying of food.

• The appliance must not be used as a work surface or as a storage surface.

• Additions or modifications to the appliance are not permitted.

• Do not place or store flammable liquids, highly inflammable materials

or fusible objects (e.g. plastic film, plastic, aluminium) on or near the appliance.

Children’s safety

• Small children must be kept away from the appliance.

• Only let bigger children work on the appliance under supervision.

• To avoid small children and pets unintentionally switching the appli-

ance on, we recommend activation of the child safety device.

General safety

• The appliance may only be installed and connected by trained, registered service engineers.

• Built-in appliances may only be used after they have built in to suitable built-in units and work surfaces that meet standards.

• In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches or splits), the appliance must be switched off and disconnected from the electrical supply, to prevent the possibility of an electric shock.

• Repairs to the appliance must only be carried out by trained registered service engineers.

Safety during use

• Remove stickers and film from the glass ceramic.

• There is the risk of burns from the appliance if used carelessly.

• Cables from electrical appliances must not touch the hot surface of

the appliance or hot cookware.

• Overheated fats and oils can ignite quickly. When cooking with fat or oil (e.g. chips) do not leave the appliance unattended.

• Switch the cooking zones off after each use.

• Users with implanted pacemakers should keep their upper body at

least 30 cm from induction cooking zones that are switched on.

• Risk of burns! Do not place objects made of metal, such as knives, forks, spoons and saucepan lids on the cooking surface, as they can get hot.

Safety when cleaning

• For cleaning, the appliance must be switched off and cooled down.

• For safety reasons, the cleaning of the appliance with steam jet or

high-pressure cleaning equipment is not permitted.

How to avoid damage to the appliance

• The glass ceramic can be damaged by objects falling onto it.

• The edge of the glass ceramic can be damaged by being knocked by

the cookware.

• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if pushed across the surface.

• Objects that melt and things that boil over can burn onto the glass ceramic and should be removed straightaway.

• Do not use the cooking zones with empty cookware or without cookware.

• To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans to boil dry.

• The ventilation gap of 5mm between the worktop and front of the unit underneath it must not be covered.

Description of the Appliance

Cooking surface layout

Induction cooking zone 1850 W

with power function 2500 W

Induction cooking zone 2300 W

with power function 3700 W

Control panel layout

Power function

Heat setting selection

Induction cooking zone 1400 W

with power function 1800 W

Control panel

Cooking zone indicators Timer function

Induction cooking zone 1850 W

with power function 2500 W

Timer display

On/Off with power indicator

STOP+GO

Display

Timer

Lock

Touch Control sensor fields

The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields.

Sensor field Function

On / Off To switch the appliance on and

off

Increase settings Increasing heat setting/time

Decrease settings Decreasing heat setting/time

Timer Timer selection

Lock Locking/unlocking the control

panel

Power Switching the power function on

and off

Stop+Go To switch the Keep Warm setting

on/off

1 Warning! Risk of burns from heat emitted. Lengthy cooking on higher

settings with larger cookware on the front cooking zones can heat the sensor fields. Take care when touching sensor fields.

Displays

Display Description

Cooking zone is switched off Keep warm setting Keep warm setting/STOP+GO

function is set

- Heat settings Heat setting is set

- Heating setting plus decimal point

Automatic warm up

function

Fault Malfunction has occurred Pan detection Cookware is unsuitable or too

Residual heat Cooking zone is still hot Child safety device Lock/child safety device is en-

Power Power function is switched on Safety cut-out Safety cut-out has been activated

Intermediate heat setting is set

Automatic warm-up function is activated

small or no cookware has been placed on the cooking zone

gaged

Residual heat indicator

1 Warning! Risk of burns from residual heat. After being switched off,

the cooking zones need some time to cool down. Look at the residual heat indicator

3 Residual heat can be used for melting and keeping food warm.

The induction cooking zones create the heat required for cooking directly in the base of the cookware. The glass ceramic is merely heated by the residual heat of the cookware. The cooling fan switches itself on and off depending upon the temperature of the electronics.

Operating the appliance

Use the induction cooking zones with suitable cookware.

Switching the appliance on and off

Control panel Display Pilot light

Switch on Touch for 2 seconds / lights up Switch off Touch for 1 second / none goes out

3 After switching on, within approx. 10 seconds a heat setting or a func-

tion must be set, otherwise the appliance automatically switches itself off.

Setting the heat setting

Control panel Display

Increase Touch to / Decrease Touch to Switch off Touch and at the same time

3 The keep warm setting lies between and . It is used to keep

food warm.

Switching the STOP+GO function on and off

The STOP+GO function simultaneously switches all cooking zones that are switched on to the keep warm setting and then back to the heat setting that was previously set. This function can be used to briefly interrupt and then continue the cooking process e.g. to take a telephone call.

Control panel Display

To switch on Touch STOP+GO To switch off Touch STOP+GO heat setting that was previ-

ously set (not automatic warm up function)

3 Timer functions are not stopped by STOP+GO. 3 STOP+GO locks the whole control panel except the sensor field .

Using the automatic warm-up function

All cooking zones are equipped with an automatic warm-up function. The automatic warm-up function sets the cooking zone to the highest setting for a certain period of time and then automatically switches back to the cooking setting that was originally set.

Step Control panel Display

1. Setting the maximum setting /

2. Place to one side for a moment /

3. touch

4. touch in order to set the de-

sired cooking setting

until /

after 3 seconds

3 If during the automatic warm up a higher heat setting is selected,

e.g. from to , the automatic warm up is adjusted. The length of time that the automatic warm up function operates depends on the heat setting selected.

Heat setting

v 0:10 1 0:10 2 0:10 2. 1:20 3 3:10 3. 4:20 4 5:50 4. 8:10 5 10:10 5. 10:30 6 2:00 6. 2:00 7 2:30 8 2:50 9 ---

Length of the automatic warm up [min:sec]

Intermediate heat setting

Length of the automatic warm up [min:sec]

Locking/unlocking the control panel

The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.

Control panel Display

Switch on Touch (for 3 seconds) Switch off Touch previously set heat setting

3 When you switch the appliance off, the locking function is automati-

cally switched off.

+ 25 hidden pages