Page 1
67670 KF-N
Ceramic glass induction hob
Installation and Operating Instructions
Page 2
Dear Customer,
Please read these user instructions carefully and keep them to refer to
later.
Please pass the user instructions on to any future owner of the appliance.
The following symbols are used in the text:
1 Safety instructions
Warning! Notes that concern your personal safety.
Important! Notes that show how to avoid damage to the appliance.
3 Useful tips and hints
2 Environmental information
2
Page 3
Contents
Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Description of the Appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Touch Control sensor fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Switching the appliance on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Selecting the heat setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Switching the multi-purpose zone on and off. . . . . . . . . . . . . . . . . . . . . . . . 9
Switching the STOP+GO function on and off. . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the automatic warm-up function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Locking/unlocking the control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Switching the power function on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Tips on cooking and frying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Cookware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Cookware for induction cooking zones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Tips on energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Examples of cooking applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Electrical Connection Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Rating Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Warranty conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Service and Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
3
Page 4
Operating Instructions
1 Safety instructions
Please comply with these instructions. If you do not, any damage re-
3
sulting is not covered by the warranty.
5 This appliance conforms with the following EU Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending
Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Correct use
• This appliance should be used only for normal domestic cooking and
frying of food.
• The appliance must not be used as a work surface or as a storage surface.
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials
or fusible objects (e.g. plastic film, plastic, aluminium) on or near the
appliance.
Child safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
• To avoid small children and pets unintentionally switching the appli-
ance on, we recommend activation of the child safety device.
General safety
• The appliance may only be installed and connected by trained, registered service engineers, or competent persons.
• Built-in appliances may only be used after they have been built in to
suitable built-in units and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches or splits), the appliance must be switched off
and disconnected from the electrical supply to prevent the possibility
of an electric shock.
• Repairs to the appliance must only be carried out by trained registered service engineers.
4
Page 5
Safety during use
• Remove stickers and film from the glass ceramic.
• There is the risk of burns from the appliance if used carelessly.
• Cables from electrical appliances must not touch the hot surface of
the appliance or hot cookware.
• Overheated fat and oil can ignite quickly. When cooking with fat or
oil (e.g. frying chips) do not leave the appliance unattended.
• Switch the cooking zones off after each use.
• Users with implanted pacemakers should keep their upper body at
least 30 cm from induction cooking zones that are switched on.
• Risk of burns! Do not place objects made of metal, such as knives,
forks, spoons and saucepan lids on the cooking surface, as they can
get hot.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or
high-pressure cleaning equipment is not permitted.
How to avoid damage to the appliance
• The ceramic glass can be damaged by objects falling onto it.
• The edge of the ceramic glass can be damaged by being knocked by
the cookware.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the ceramic glass if pushed across the surface.
• Objects that melt and things that boil over can burn onto the ceramic
glass and should be removed straightaway.
• Do not use the cooking zones with empty cookware or without cookware.
• To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans to boil dry.
• The ventilation gap of 5mm between the worktop and front of the
unit underneath it must not be covered.
5
Page 6
Description of the Appliance
Cooking surface layout
Single cooking zone 1200 W
Induction cooking zone 2300 W
with power function 3700 W
Control panel layout
Power function
Heat setting selection
Multi-purpose zone 1500/2400
Control panel Induction cooking zone 1400 W
with power function 1800 W
Cooking zone indicators
Timer function
Timer display
W
Outer ring
On/Off
On/Off
with power indicator
6
STOP+GO
Timer
Multi-purpose zone pilot
light
Display
Lock
Page 7
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions
are controlled by touching sensor fields and confirmed by displays and
acoustic signals.
Touch the sensor fields from above, without covering other sensor
fields.
Sensor field Function
On / Off Switches appliance on and off
Increase settings Increasing heat setting/ time
Decrease settings Decreasing heat setting/ time
Timer Timer selection
Lock Locking/unlocking the control
panel
Power Switching the power function on
and off
Stop+Go To switch the Keep Warm setting
on/off
Multi-purpose zone To switch the outside ring on and
off
1 Warning! Risk of burns from heat emitted. Lengthy cooking on higher
settings with larger cookware on the front cooking zones can heat the
sensor fields. Take care when touching sensor fields.
7
Page 8
Displays
Display Description
Cooking zone is switched off
Keep warm setting Keep warm setting/STOP+GO
function is set
- Heat settings Heat setting is set
- Heating setting plus
decimal point
Automatic warm up
function
Fault Malfunction has occurred
Pan detection Cookware is unsuitable or too
Residual heat Cooking zone is still hot
Child safety device Lock/child safety device is set.
Power Power function is switched on
Safety cut-out Safety cut-out has been activated
Intermediate heat setting is set
Automatic warm-up function is
activated
small or no cookware has been
placed on the cooking zone
Residual heat indicator
1 Warning! Risk of burns from residual heat. After being switched off,
the cooking zones need some time to cool down. Look at the residual
heat indicator
.
3 Residual heat can be used for melting and keeping food warm.
The induction cooking zones create the heat required for cooking directly in the base of the cookware. The glass ceramic is merely heated
by the residual heat of the cookware.
The cooling fan switches itself on and off depending upon the temperature of the electronics.
8
Page 9
Operating the appliance
Use the induction cooking zones with suitable cookware.
3
Switching the appliance on and off
Control panel Display Pilot light
Switch on Touch for 2 seconds / lights up
Switch off Touch for 1 second / none goes out
3 After switching on, within approx. 10 seconds a heat setting or a func-
tion must be set, otherwise the appliance automatically switches itself
off.
Selecting the heat setting
Control panel Display
Increase Touch to /
Decrease Touch to
Switch off Touch and at the same time
3 The keep warm setting lies between and . It is used to keep
food warm.
Switching the multi-purpose zone on and off
With the multi-purpose zone the heating surface can be matched to
the size of the cookware.
Multi-purpose zone Sensor panel Power indicator
To switch on outside ring
To switch off outside ring
Touch for 1-2 sec-
onds.
Touch for 1-2 sec-
onds.
is lit
goes out
9
Page 10
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that
are switched on to the keep warm setting and then back to the heat
setting that was previously set. This function can be used to briefly interrupt and then continue the cooking process e.g. to take a telephone
call.
Control panel Display
To switch onTouch STOP+GO
To switch
off
Touch STOP+GO heat setting that was previ-
ously set (not automatic
warm up function)
3 Timer functions are not stopped by STOP+GO.
3 STOP+GO locks the whole control panel except the sensor field .
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm-up function.
The automatic warm-up function sets the cooking zone to the highest
setting for a certain period of time and then automatically switches
back to the cooking setting that was originally set.
Step Control panel Display
1. Setting the level / /
2. Place to one side for a moment /
3. touch
4. touch in order to set the de-
sired cooking setting
until /
after 3 seconds
3 If during the automatic warm up a higher heat setting is selected,
e.g. from to , the automatic warm up is adjusted.
10
Page 11
The length of time that the automatic warm up function operates depends on the heat setting selected.
Heat
setting
v 0:30 0:10
1 1:00 0:10
2 1:40 0:10
2. 2:40 1:20
3 4:50 3:10
3. 5:30 4:20
4 6:30 5:50
4. 8:10 8:10
5 10:10 10:10
5. 12:20 10:30
6 2:30 2:00
6. 2:30 2:00
7 3:30 2:30
8 4:30 2:50
9 --- ---
Length of the automatic
warm up
radiation element
[min:sec]
Length of the automatic
warm up
induction
[min:sec]
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can
be locked at any time in order to prevent the settings being changed
e.g. by wiping over the panel with a cloth.
Control panel Display
Switch on Touch (for 3 seconds)
Switch off Touch previously set heat setting
3 When you switch the appliance off, the locking function is automati-
cally switched off.
11
Page 12
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Setting the child safety device
Step Control panel Display/Signal
1. Switch on the appliance
(Do not set a heat setting)
2. Touch until the signal sounds Acoustic signal
3. Touch
Appliance switches off. The child safety device is set.
Releasing the child safety device
Step Control panel Display/Signal
1. Switch on the appliance
2. Touch until the signal sounds Acoustic signal
3. Touch
Appliance switches off. The child safety device is released.
Overriding the child safety device
The child safety device can be released in this way for a single cooking
session; it remains activated afterwards.
Step Control panel Display/Signal
12
1. Switch on the appliance
2. Touch and at the same time / acoustic signal
Until the appliance is next switched off, it can used as normal.
Page 13
Switching the power function on and off
The power function makes more power available to the induction
cooking zones, e.g. to bring a large quantity of water to the boil quickly.
The power function is activated for 10 minutes. After that the induction cooking zone automatically switches back to heat setting 9.
Control panel Display
Switch on Touch
Switch off Touch
Touch
3 If the power function has ended, the cooking zones automatically
switch back to the heat setting set previously.
Power Management
The cooking zones have a maximum
power available to them.
If this power range is exceeded by
switching on the power function,
Power Management reduces the
heat setting of another cooking
zone.
The indicator for this cooking zone
changes between the heat setting
set and maximum possible heat setting for one minute. Thereafter the
actual heat setting is displayed.
Example:
Last cooking
zone switched
on
set heat setting set heat
Other cooking zone
indicator actual heat
setting
setting
p 9 7 alternating with 9 7
13
Page 14
Using the timer
All cooking zones can use each use one of the two timer functions at
the same time.
Function Condition Outcome after the
time has elapsed
Automatic cut-out a heat setting is set acoustic signal
00 flashes
Cooking zone
switches off
Countdown timer cooking zones not in use acoustic signal
00 flashes
3 If a cooking zone is switched off, the timer function set is also switched
off.
3 If a heat setting is set on this cooking zone in addition to a countdown
timer, the cooking zone is switched off after the time set has elapsed.
Selecting a cooking zone
Step Control panel Display
1. Touch once Pilot light of the first
cooking zone flashes
2. Touch once Pilot light of the second
cooking zone flashes
3. Touch once Pilot light of the third
cooking zone flashes
4. Touch once Pilot light of the fourth
cooking zone flashes
3 The heat setting indicator of the selected cooking zone goes out, until
the timer time is set.
14
Page 15
3 If the power indicator is flashing more slowly, the heat setting indicator
appears again and the heat setting can be re-set or modified.
3 If other timer functions are set, after a few seconds the shortest re-
maining time of all the timer functions is displayed and the corresponding pilot light flashes.
Setting the time
Step Control panel field Display
1. Select cooking
zone
2. Touch or for
the cooking zone selected
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the Timer function
Step Control panel Display
1. Select a cook-
ing zone
2. Touch for the
cooking zone selected
Simultaneoulsy
touch
the cooking zone selected
and for
Pilot light of the cooking zone selected flashes
00 to 99 minutes
Pilot light of the selected cooking
zone flashes more quickly.
Remaining time is displayed
The remaining time counts down to
00.
00 is displayed.
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
15
Page 16
Changing the time
Step Control panel field Display
1. Select cooking
zone
Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
2. Touch or for
01 to 99 minutes
the cooking zone selected
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Displaying the time remaining for a cooking zone
Step Control panel field Display
1. Select cooking
zone
Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
Step Control panel field Acoustic signal
16
1. Touch Acoustic signal to acknowledge.
Acoustic signal stops.
Page 17
Safety cut-out
Cooking surface
• If after switching on the cooking surface, a heat setting is not set for
a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off.
• If one or more sensor fields are covered by objects (a pan, cloths, etc.)
for longer than approx. 10 seconds, a signal sounds and the cooking
surface switches off automatically.
• If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. 10 seconds.
Control panel
• When the appliance is switched off, if one or more of the sensor
fields on the control panel are covered for more that 10 seconds, an
acoustic signal sounds. The acoustic signal switches itself off automatically when the sensor fields are no longer covered.
Induction cooking zones
• In the event of overheating (e.g. when a pan boils dry) the cooking
zone automatically switches itself off. is displayed. Before being
used again, the cooking zone must be set to 0 and allowed to cool
down.
• If cookware that is not suitable is used, flashes in the display and
after 2 minutes the display for the cooking zone switches itself off.
all cooking zones
• If one of the cooking zones is not switched off after a certain time, or
if the heat setting is not modified, the relevant cooking zone switches
off automatically. is displayed. Before being used again, the cooking zone must be set to 0.
Heat setting Switches off after
V, 1 - 2
3 - 4
5
6 - 9
6 hours
5 hours
4 hours
1.5 hours
17
Page 18
Tips on cooking and frying
Information about acrylamides
3
According to the latest scientific research, intensive browning of food,
especially in products containing starch, may present a health risk due
to acrylamide. Therefore we recommend cooking at low temperatures
and not browning foods too much.
Cookware
• You can recognise good cookware from the bottoms of the pans. The
bottom should be as thick and flat as possible.
• Cookware made of enamelled steel or with aluminium or copper bottoms can leave discolourations on the ceramic glass surface which are
difficult or impossible to remove.
Cookware for induction cooking zones
Cookware material
Cookware material Suitable
Steel, enamelled steel yes
Cast iron yes
Stainless steel if appropriately labelled by the manufacturer
Aluminium, copper, brass ---
Glass, ceramic, porcelain ---
3 Cookware for induction cooking zones is labelled as suitable by the
manufacturer.
Suitability test
Cookware is suitable for induction cooking, if …
• ... a little water on an induction cooking zone set to heat setting 9 is
heated within a short time.
• ... a magnet sticks to the bottom of the cookware.
3 Certain cookware can make noises when being used on induction cook-
ing zones. These noises are not a fault in the appliance and do not affect operation in any way.
18
Page 19
Bottom of the cookware
The bottom of the cookware should be as thick and flat as possible.
Pan size
Induction cooking zones adapt automatically to the size of the bottom
of the cookware up to a certain limit. However the magnetic part of
the bottom of the cookware must have a minimum diameter depending
upon the size of the cooking zone.
Diameter of cooking zone
[mm]
210 180
145 120
Minimum diameter of dish base
[mm]
3 The cookware must be placed centrally on the cooking zone.
Tips on energy saving
2 Place cookware on the cooking zone before it is switched on.
2 If possible, always place a lid on the cookware.
19
Page 20
Examples of cooking applications
The information given in the following table is for guidance only.
Heat
The power function is suitable for heating large quantities of liquid.
Cooking
setting
process
0 Off position
Keeping
V
1-2
2-3
3-4
4-5 Boiling
6-7
7-8
9
food
warm
Melting
Solidify-
ing
Simmer-
ing
Steaming
Braising
Gentle
frying
Heavy
frying
Boiling
Searing
Deep fry-
ing
suitable for Cook time Tips/Hints
Keeping cooked foods
warm
Hollandaise sauce,
melting butter, chocolate,
gelatine
Fluffy omelettes, baked
eggs
Simmering rice and milk-
based dishes
Heating up ready-cooked
meals
Steaming vegetables, fish
Braising meat
Steaming potatoes 20-60 mins.
Cooking larger quantities
of food, stews and soups
Frying escalope, veal cordon bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts
Hash browns, loin steaks,
steaks, Flädle (pancakes
for garnishing soup)
Boiling large quantities of water, cooking pasta, searing meat
(goulash, pot roast), deep frying chips
as required Cover
5-25 mins. Stir occasionally
10-40 mins. Cook with lid on
Add at least twice as
25-50 mins.
20-45 mins.
60-150
mins.
as required
5-15 mins.
per pan
much liquid as rice, stir
milk dishes part way
With vegetables add
only a little liquid (a
Use only a little liquid,
e. g.: max.
for 750 g of potatoes
Up to 3 l liquid plus in-
Turn halfway through
Turn halfway through
through cooking
few tablespoons)
¼ l water
gredients
cooking
cooking
20
Page 21
Cleaning and care
Take care! Risk of burns from residual heat.
1
1 Important Sharp objects and abrasive cleaning materials will damage
the appliance. Clean with water and washing up liquid.
1 Important Residues from cleaning agents will damage the appliance.
Remove residues with water and washing up liquid.
Cleaning the appliance after each use
1. Wipe the appliance with a damp cloth and a little washing up liquid.
2. Rub the appliance dry using a clean cloth.
Removing deposits
1. Place the scraper on the glass ceramic surface at an angle.
2. Remove residues by sliding the blade over the surface.
3. Wipe the appliance with a damp cloth and a little washing up liquid.
4. Rub the appliance dry using a clean cloth.
Remove
Type of dirt
sugar, food containing sugar yes ---
plastics, tin foil yes ---
limescale and water rings --- yes
fat splashes --- yes
shiny metallic discolouration --- yes
*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist shops,
supermarkets, the parts department of your local Service Force Centre or from
www.shop.electrolux.co.uk
imme-
diately
when the appliance has
cooled down
using
a scraper*
cleaner for glass ce-
ramic or stainless
steel*
3 Remove stubborn residues with a cleaner for glass ceramic or stainless
steel.
3 Scratches or dark stains on the glass ceramic that cannot be removed
do not however affect the functioning of the appliance.
21
Page 22
What to do if …
Problem Possible cause Remedy
The appliance cannot be
switched on or is not operating
The residual heat indicator
is not displaying anything
The automatic warm up
function is not switching
itself on
Repeated acoustic signal
(6x), appliance switches off
Acoustic signal sounds
when appliance is switched
off
Acoustic signal sounds and
appliance switches itself on
and then off again; after 5
seconds another acoustic
signal sounds
More than 10 seconds have
passed since the appliance
was switched on
The lock is switched on Switch off the lock (See
The child safety device is
switched on
Several sensor fields were
touched at the same time
Safety cut-out has been
triggered
STOP+GO is activated Switching off STOP+GO
The cooking zone was only
on for a short time and is
therefore not hot
There is still residual heat
on the cooking zone
The highest heat setting is
set
One or more sensor fields
have been covered for
longer than 10 seconds
The control panel is wholly
or partly covered by objects.
The On/Off sensor field has
been covered up, e.g. by a
cloth
Switch the appliance on
again.
the section “Locking/unlocking the control panel”)
Deactivate child safety device (See the section “Child
safety device”)
Only touch one sensor field
Remove any objects (pan,
cloths, etc.) that are lying
on the control panel.
Switch the appliance on
again
If the cooking zone is supposed to be hot, call your
local Service Force Centre.
Let the cooking zone cool
down
The highest heat setting
has the same power as the
automatic warm up function
Uncover sensor field
Remove objects.
Do not place any objects
on the control panel
22
Page 23
Problem Possible cause Remedy
Display is switching between two heat settings
flashes Unsuitable cookware Use suitable cookware
is lit Overheating protection for
and number are dis-
played
and minus are displayed Light rays that are too
Power management is reducing the power of this
cooking zone
No cookware on the cooking zone
The diameter of the bottom of the cookware is too
small for the cooking zone
the cooking zone has been
triggered
Safety cut-out has been
triggered
Electronics fault Disconnect the appliance
strong on the control panel, for example bright sunlight
See the section “Switching
the power function on and
off”
Place cookware on the
cooking zone
Move onto a smaller cooking zone
Use suitable cookware
Switch off the cooking
zone. Switch the cooking
zone on again
Switch off the cooking
zone. Switch the cooking
zone on again
from the electrical supply
for a few minutes (Take the
fuse out of the house’s wiring system)
If after switching on again,
is displayed again, call
the customer service department
Briefly shade the control
panel, for example with
the hand Acoustic signal
sounds, appliance switches
itself off Switch appliance
on (again)
If you are unable to remedy the problem by following the above
suggestions, please contact your local Service Force Centre.
1 Warning! Repairs to the appliance are only to be carried out by quali-
fied service engineers. Considerable danger to the user may result from
improper repairs.
3 If the appliance has been wrongly operated, the visit from the service
technician or dealer may not take place free of charge, even during the
warranty period.
23
Page 24
Disposal
Packaging material
2
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging materials in the appropriate
container at your local waste disposal facilities.
2 Old appliance
The symbol
product may not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you
purchased the product.
W on the product or on its packaging indicates that this
24
Page 25
Installation Instructions
Safety instructions
The laws, ordinances, directives and standards in force in the country of
use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances and units are to be observed.
Anti-shock protection must be provided by the installation, for example
drawers may only be installed with a protective floor directly underneath the appliance.
The cut surfaces of the worktop are to be protected against moisture
using a suitable sealant.
The sealant seals the appliance to the work top with no gap.
When building in, protect the underside of the appliance from steam
and moisture, e.g. from a dishwasher or oven.
Avoid installing the appliance next to doors and under windows. Otherwise hot cookware may be knocked off the rings when doors and windows are opened.
1 WARNING!
Risk of injury from electrical current.
• The electrical mains terminal is live.
• Observe connection schematic.
• Observe electrical safety rules.
• Ensure anti-shock protection through correct installation by a quali-
fied electrician.
• The appliance must be connected to the electrical supply by a qualified electrician.
1 IMPORTANT!
Risk of injury from electrical current.
Loose and inappropriate plug and socket connections can make the terminal overheat.
• Have the clamping joints correctly installed by a qualified electrician.
• Use strain relief clamp on cable.
• In the event of single-phase or two-phase connection, the appropri-
ate mains cable of type H05BB-F Tmax 90° (or higher) must be used.
• If this appliance’s mains cable is damaged, it must be replaced by a
special cable (type H05BB-F Tmax 90°; or higher). Please contact your
local Service Force Center for further advice.
25
Page 26
A device must be provided in the electrical installation which allows the
appliance to be disconnected from the mains at all poles with a contact
opening width of at least 3 mm
Suitable isolation devices include line protecting cut-outs, fuses (screw
type fuses are to be removed from the holder), earth leakage trips and
contactors.
Electrical Connection Diagram
For UK only: 230V... 240V~
26
Sticking on the seal
• Clean the worktop in the area of the cut-out section.
• Stick the one-sided self-adhesive sealing tape supplied all the way
round the lower edge of the cooking surface along the outer edge of
the glass ceramic panel. Do not stretch it. The cut ends should lie in
the middle of one side. When you have cut it to length (add a few
mm), press the two ends flush up against one another.
Page 27
Assembly
27
Page 28
28
Page 29
29
Page 30
30
Page 31
Rating Plate
AEG - ELECTROLUX
67670KF-N
55GAD82AG
230 V 50 Hz
949 592 244
Induction 3,7 kW
7,3 kW
31
Page 32
Warranty conditions
Great Britain
Standard guarantee conditions
We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or
any part thereof is proved to be defective by reason only of faulty workmanship or materials, we
will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage
on condition that:
• The appliance has been correctly installed and used only on the electricity or gas supply stated
on the rating plate.
• The appliance has been used for normal domestic purposes only, and in accordance with the
manufacturer's operating and maintenance instructions.
• The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any
person not authorised by us.
• All service work under this guarantee must be undertaken by a Service Force Centre. Any appliance or defective part replaced shall become the Company's property.
• This guarantee is in addition to your statutory and other legal rights.
• Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available
outside these hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
• Damage or calls resulting from transportation, improper use or neglect, the replacement of any
light bulbs or removable parts of glass or plastic.
• Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom.
• Appliances found to be in use within a commercial environment, plus those which are subject
to rental agreements.
• Products of AEG manufacture which are not marketed by AEG.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to
your new home subject to the following qualifications:
• The guarantee starts from the date you first purchased your product.
• The guarantee is for the same period and to the same extent for labour and parts as exists in
the new country of use for this brand or range of products.
• This guarantee relates to you and cannot be transferred to another user.
• Your new home is within the European Community (EC) or European Free Trade Area.
• The product is installed and used in accordance with our instructions and is only used domesti-
cally, i.e. a normal household.
• The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your
move and able to look after you and your appliances.
France Senlis +33 (0) 3 44 62 29 29
Germany Nürnberg +49 (0) 800 234 7378
Italy Pordenone +39 (0) 800 117511
Sweden Stockholm +46 (0) 8 672 5360
UK Luton +44 (0) 8705 350 350
32
Page 33
333435
Page 34
Page 35
Service and Spare Parts
If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning:
0870 5 929 929
Your telephone call will be automatically routed to the Service Force
Centre covering your post code area.
For the address of your local Service Force Centre and further information about Service Force, please visit the website at
www. serviceforce.co.uk
Before calling out an engineer, please ensure you have read the details
under the heading „What to do if...“
When you contact the Service Force Centre you will need to give the
following details:
1. Your name, address and post code.
2. Your telephone number.
3. Clear and concise details of the fault.
4. The model and serial number of the appliance (found on the rating
plate)
5. The purchase date.
Please note that a valid purchase receipt or guarantee documentation is
required for in-guarantee service
calls.
Customer Care
For general enquiries concerning
your AEG appliance, or for further
information on AEG products please
contact our Customer Care Department by letter or telephone at the
address below or visit our website at www.aeg.co.uk.
Customer Care Department
Major Appliances
AEG Domestic Appliances
Addington Way
Luton
Bedfordshire, LU4 9QQ
Tel: 08705 350350 (*)
For Customer Service in the Republic
of Ireland please contact us at the ad-
dress below:
AEG/ Electrolux Group (Ire) Ltd
Long Mile Road/ Dublin 12
Republic of Ireland
Tel: +353 (0) 1 4090754
Email: service.eid@electrolux.ie
(*) Calls may be recorded for training purposes
Page 36
From the Electrolux Group. The world´s No.1 choice.
The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor
use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,
vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more
than 150 countries around the world.
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg
http://www.aeg-electrolux.de
© Copyright by AEG
822 925 826-A-160206-01
Subject to change without notice
Loading...