Page 1
P
2
0
1
3
4
5
1.5L table blender
KP-508AGF
instrucon manual
12
MONTH
WARRANTY
Page 2
INDEX
KP-508AGF
IMPORTANT SAFETY INSTRUCTIONS ......................... 1
CONTROLS AND FEATURES ........................................... 5
UNPACKING ...................................................................... 6
PREPARATION .................................................................. 6
Blender set features ................................................... 6
Work area ..................................................................... 6
OPERATION ....................................................................... 7
First use ........................................................................ 7
Which types of food are suitable for blending? ..... 7
Blending soup .............................................................. 7
Cautions in use ............................................................ 7
Preparing the blender ................................................ 8
Blending continuously ............................................... 9
Pulse blending ............................................................. 9
Adding more liquid ...................................................... 9
Stirring the mixture ..................................................... 9
When your mixture is ready .................................... 10
Please keep your sales docket, including cash register receipt, in a safe place
as the docket will prove the commencement of the period of this warranty. If
you wish to make a claim specifically under this manufacturer’s warranty, you
will be required to provide proof of purchase, preferably your sales docket.
AFTER USE ......................................................................10
Storage ....................................................................... 10
CARE AND CLEANING .................................................. 10
Motor body ................................................................. 10
Rinsing the jug ........................................................... 10
Dismantling and washing the jug ........................... 11
Reassembling the jug ............................................... 11
SPECIFICATIONS ............................................................ 12
WARRANTY ..................................................................... 13
Page 3
PAGE 1
KP-508AGF
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using and save for
future reference
Always use the appliance from a power outlet •
of the same voltage (A.C. only) marked on the
appliance.
The appliance plug includes an earthed pin and •
must be used with a power outlet with earthed
connection.
Always turn the power off at the power outlet •
before you insert or remove a plug. Remove by
grasping the plug - do not pull on the cord.
Turn the power off and remove the plug from •
power outlet when the appliance is not in use,
before putting on or removing parts and before
cleaning.
Do not immerse the motor or control unit into •
water or other liquids.
After cleaning the jug, ensure that it is •
completely dry before using again.
Do not attempt to dislodge food or any item •
inside the blender when it is still powered on.
Ensure the unit is turned off before using a
spatula to do that.
Ensure the lid is in place on the jug or blender •
before operating the unit.
If the supply cord is damaged, it must be •
replaced by the manufacturer or its service
agent or a similarly qualified person in order to
avoid a hazard.
The appliance shall not be operated by means •
of an external timer or separate remote control
system.
Page 4
KP-508AGF
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS
Do not let the power cord of the appliance hang •
over the edge of a table or bench top or touch
any hot surface.
Do not place the appliance on or near a hot gas •
flame, electric element or on a heated oven. Do
not place on top of any other appliance.
Do not use the appliance near flammable •
material such as curtains, draperies and
wallpaper.
For additional protection, it is recommended •
to use the appliance with a residual current
device (safety switch) with a tripping current
not exceeding 30mA in the power socket which
supplies power to the appliance.
Do not leave the power cord near the edge of a •
bench top where children may touch or pull it.
Children should be supervised to ensure they •
do not play with the appliance.
This appliance is not suitable for use by •
persons (including children) who have limited
physical, sensory or mental abilities, or by
persons who have a lack of experience and/or
lack of knowledge unless they are supervised
by a person in charge for their security or
receive instructions by them on how to use the
appliance.
Do not move the appliance while switched on. •
Always operate the appliance on a flat, level •
surface.
Do not use the appliance for any purpose other •
than its intended use.
Page 5
PAGE 3
KP-508AGF
IMPORTANT SAFETY INSTRUCTIONS
Do not leave the appliance unattended during •
use.
Do not use outdoors.•
This appliance is for household use only.•
The use of accessories or attachments not •
supplied with appliance is not recommended.
Avoid contact with moving parts. Keep hands, •
hair, clothing, as well as spatulas and other
utensils away from the blender during operation
to reduce the risk of injury to persons, and/or
damaged to the blender.
Do not continuously operate the blender •
too long. The motor may overheat. It can be
operated without interruption for maximum of
1 minute and should be allowed to cool down
for approximately 30 minutes before the next
operation.
Do not use the blender to blend hard or dry •
ingredients such as coffee beans, ice cubes,
mixtures containing fruit stones cereals and
chocolate in lumps as these may damage the
blades.
Take care when handling the sharp blades and •
during cleaning.
Do not blend with an ingredient volume capacity •
of less than 1 cup (250ml).
Always place one hand firmly on top of the •
closed blender lid to enhance the stability of
the unit during operation.
Ensure the blade assembly is properly secure •
prior to use.
Always check the blender jug to ensure there •
are no signs of cracks or damage prior to use.
Page 6
KP-508AGF
PAGE 4
IMPORTANT SAFETY INSTRUCTIONS
Do not process hot or boiling liquids. Allow •
liquids to cool before placing into the blender
jug.
Do not place any part of the blender in a •
dishwasher, microwave or fridge.
Ensure a minimum of 20 cm space around the •
unit for air circulation.
Ensure that the ventilation slots on the bottom •
of the unit are not block during use.
Do not pour boiling or very hot water or liquids •
into the glass jug during use or when cleaning
as it can damage the glass.
Maximum ingredients used: 600g soaked •
carrots for maximum of 1 minute.
This appliance is intended to be used in •
household and similar applications such as :
Staff kitchen areas in shops, offices and •
other working environments;
Farm houses; •
By clients in hotels, motels and other •
residential type environments;
Bed and breakfast type environments.•
Switch off the appliance and disconnect from •
the supply before changing accessories or
approaching parts, which move in use.
Page 7
PAGE 5
KP-508AGF
P
2
0
1
3
4
5
a
b
c
d
e
Cap1.
Jug lid2.
Jug3.
Motor body4.
Speed control5.
CONTROLS AND FEATURES
Page 8
KP-508AGF
PAGE 6
UNPACKING
Unpack the Blender motor body and accessories from the
carton.
Retain the carton and packing for future use. If you have to
dispose of the carton and packing, please do so responsibly.
The carton should contain -
1 x Blending jug (including lid and cap)
1 x Motor body
1 x Owner’s handbook.
PREPARATION
Blender set features
The blender set includes -
The motor body with adjustable speeds.•
A high capacity removable glass blending jug.•
Removable cap in the jug lid for adding liquid.•
Work area
Before using your blender, prepare a clear, uncluttered work
area near to a mains power outlet where the cable will not be at
risk of being pulled.
Page 9
PAGE 7
KP-508AGF
OPERATION
First use
Before using your blender for the first time you should ensure
that the components are thoroughly cleaned.
Follow the instructions in the Care and Cleaning section to •
clean all components thoroughly before first use.
Which types of food are suitable for blending?
Your blender is suitable for blending most types of food to a liquid
including fruits, vegetables, home-made soups (hot or cold) and
drinks.
Bananas, berries, mango, peaches, plums, nectarines, apple,
pear and melon all make delicious blended drinks when blended
with a little liquid. Experiment with the addition of a little milk, or
dairy-free alternative, yogurt, rice milk or coconut milk.
Carrots, tomatoes, leafy vegetables, avocado, cucumber can all
be blended with the addition of a little water or stock.
Some great blender recipe books are available for drinks and
soups or try searching on-line for different ideas.
Preparing fruit or vegetables for blending
Wash the ingredients.
If preferred, peel fruit and vegetables before preparation.
Remove any core or pips.
Soft fruit and vegetables can now be chopped roughly. Hard fruit
and vegetables should be chopped finely or grated.
Blending soup
If you are making soup, cook the soup ingredients gently to
soften up and form a soup base, then use the blender to liquidise
the soup.
Cautions in use
Never operate the blender without the lid or cap.•
Never fill the blender above the maximum 1500ml/48oz marks •
on the jug. If you have more ingredients than this to blend,
split them into batches to blend separately.
Place one hand on top of the blender during operation to •
stabilise it.
Page 10
KP-508AGF
PAGE 8
OPERATION
Preparing the blender
CAUTION: Do not use the blender to blend hard or dry ingredients
such as coffee beans, ice cubes, mixtures containing fruit
stones cereals and chocolate in lumps as these may damage
the blades.
CAUTION: Do not pour boiling or very hot water or liquids into
the glass jug during use or when cleaning as it can damage the
glass.
NOTE: The maximum operating time is one minute. If you exceed
this time you must rest the unit for thirty minutes.
For best results, the food ingredients should include some liquid
content. This may be water, fruit juice, milk etc depending on the
recipe.
Check that the power cord is disconnected and that the •
speed control is set to the ‘0’ (Off) position.
The lid is a push fit in the top of the jug. Remove the lid and •
place the ingredients in the jug. Add any liquid ingredients
first, then any solid ingredients.
Hold back some of the liquid initially. It is better to add more
liquid during blending if required.
Fit the cap into the jug lid.•
The cap can only be fitted in one
position. Line up the lugs on the cap
with the slots in the lid and fit the cap.
Twist the cap clockwise to lock it in •
place.
Fit the lid to the jug.•
Check carefully that the lid is pressed
fully onto the jug.
Line up the jug base with the motor •
body and place the assembled jug on
the motor body.
NOTE: If the jug does not sit flat on
the motor body, a safety cutout will
prevent operation.
Connect the power cable to a mains •
outlet.
P
2
0
1
3
4
5
Page 11
PAGE 9
KP-508AGF
Adding more liquid
You may find you need to add more liquid during blending.
Set the speed switch to the ‘0’ (Off) position.•
Twist the cap anti-clockwise and lift it out of the lid.•
Pour in the additional liquid.•
Re-fit the cap securely.•
Continue blending.•
Stirring the mixture
It may be necessary to stir the mixture to distribute the
ingredients.
Set the speed switch to the ‘0’ (Off) position.•
Lift the jug off the motor body and remove the lid.•
Stir the mixture with a spoon.•
Re-fit the lid, place the jug back on the motor body and •
continue blending.
OPERATION
Blending continuously
To blend continuously, turn the speed control to a position •
between 1 (slow) and 5 (fast).
The blender will switch on. If you are not sure which speed
setting to use, start with a slow speed and increase the speed
setting gradually. High speeds are best if the ingredients are
quite solid.
Watch blending progress through the glass jug and turn the •
speed control to the ‘0’ (Off) position when you have finished
blending.
Pulse blending
Pulse blending is useful for short bursts of powerful blending.
Turn the speed control to the ‘P’ position.•
The motor will run while the speed control is held in this •
position.
Release the speed control to stop blending at any time.•
You can turn the speed control repeatedly to the ‘P’ position to
blend in pulses, allowing the ingredients to settle if required.
Page 12
KP-508AGF
PAGE 10
CARE AND CLEANING
Never clean any of the blender components with scourers,
abrasive pads or chemicals.
The blender components are not dishwasher safe.
Disconnect the blender motor body from mains power before •
cleaning it.
Motor body
The motor body must never be immersed in water. Wipe it •
with a damp cloth and dry thoroughly.
Rinsing the jug
After light use the jug may just require rinsing.
Fill the jar with warm water•
Twist the speed control to the ‘P’ (pulse) position several •
times.
The water will rinse out the jug.
Leave the jug to dry thoroughly before storage.•
OPERATION
When your mixture is ready
Set the speed switch to the ‘0’ (Off) position.•
Lift the jug off the motor body.•
Remove the lid and pour out the mixture into a container, •
ready to use or to refrigerate.
NOTE: Cold ingredients may warm up slightly when blended.
Refrigerate them after blending to cool. Hot ingredients such as
soups should be covered and left in a cool place to cool before
refrigeration.
AFTER USE
Immediately after use, follow the instructions in the Care and •
Cleaning section to clean the blender components.
Storage
When all the components are dry, coil the power cable •
loosely and store the blender set out of reach of children and
pets.
Page 13
PAGE 11
KP-508AGF
CARE AND CLEANING
Dismantling and washing the jug
The jug can be dismantled and washed to
clean it thoroughly.
CAUTION: The blade is sharp. Take care
when handling the blade assembly.
Hold the jug firmly by the handle and •
twist the jug base in the direction
shown.
The jug base will unscrew.
Remove the jug base.•
The blade assembly and sealing ring •
can now be lifted out of the jug base.
Hand-wash the jug components •
in a mild detergent solution. Dry
thoroughly.
Reassembling the jug
Invert the jug and lay the rubber seal •
on the opening.
Fit the blade assembly through the •
seal.
CAUTION: The rubber seal must fit
between the blade assembly and
the jug. Ensure that the seal is not in
contact with the blade.
Tighten the jug base ring to secure •
the blade assembly to the jug.
CAUTION: Do not over-tighten the ring
as the glass jug may be damaged.
Page 14
KP-508AGF
PAGE 12
SPECIFICATIONS
Power supply ..................................................... 220 - 240V~, 50/60Hz
Power consumption.................................................................... 500W
IMPORTANT: THIS APPLIANCE MUST BE EARTHED
E285
Page 15
PAGE 13
KP-508AGF
WARRANTY
Our goods come with guarantees that cannot be excluded 1.
under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. Where a failure
does not amount to a major failure, Woolworths is entitled to
choose between providing you with a repair, replacement or
refund. To obtain compensation, you would need to provide
documentary evidence of the loss or damage suffered,
and documentary evidence that such loss or damage was
a reasonably foreseeable consequence of a failure by
Woolworths to comply with a consumer guarantee under
the Australian Consumer Law. Such evidence may include
photographs, statutory declarations, receipts or reports (eg
from your doctor), depending on the loss or damage.
In addition to all rights and remedies to which you may be 2.
entitled under the Competition and Consumer Act 2010
(Commonwealth) and any other relevant legislation, the
manufacturer warrants this product to be free from defects
in materials or workmanship for a period of 12 months from
the date of purchase.
In order to claim under this warranty you will need to bring 3.
the product to any Woolworths store, along with proof of
purchase (typically this will be a receipt). Any cost incurred
by you in bringing the product to the service desk will be
borne by you. We will then, at our option, either repair or
replace the product, or refund your money and take back the
product – in accordance with our Returns Policy, a copy of
which is available at www.woolworths.com.au (and click on
tab for About Us, Our Services, In Stores Services).
Our liability under this manufacturer’s warranty is 4.
subject to us being satisfied that a defect was caused by
defective workmanship or materials, and was not caused
by or substantially contributed to by other factors, or
circumstances beyond our control, including (but not limited
to) defective installation, maintenance or repair, alteration or
modification of the product in a manner not recommended by
the manufacturers or any neglect, misuse or excessive use.
The benefits conferred by this manufacturer’s warranty 5.
are in addition to all rights and remedies conveyed by the
Competition and Consumer Act 2010 (Commonwealth),
and any other statutory rights to which you may already
be entitled, and this warranty does not exclude, restrict or
modify any such rights or remedies that are implied by law.
This warranty is provided by Woolworths Limited of 1 6.
Woolworths Way, Bella Vista NSW 2153, Phone: 1300 767 969.
Page 16
Made for Woolworths
1 Woolworths Way
Bella Vista NSW 2153
Australia
Made in China
ADESSO KP-508AGF V0.1
Loading...