
Refill Hose (optional)
Product Line
Model
Rinse Hose
(standard)
Long life filter
screen
SHORTENING MELTER-FILTERS
EZMelt 18, EZMelt 24, EZMelt 34
EZMelt 24 Shortening Melter-Filter (w/optional Refill Hose)
SPEC
EZ18-24-34/
03-2013
EZMelt 18 Shortening Filter
Foot switch
(with optional Refill Hose)
Heating element
and cube cutter
Description
Belshaw’s EZMelt shortening melter-filters effectively clean and recycle
shortening in any fryer with capacity up to 37 gallons (138 Liters).
The advantage of a recycling filter that heats shortening
▪ If zero trans fat shortenings are used, they gradually become thicker
at normal bakery temperatures. This can lead to pump blockages
and failures with standard filters. Using the heated EZ Melt
overcomes this problem.
▪ Pumping reheated shortening through a fixed connection to the
fryer is faster and safer than any other method, such as dropping in
shortening blocks. The EZMelt does this using a refill hose (optional)
which attaches directly to a Belshaw fryer.
Standard features
▪ Slides under compatible floor and tabletop fryers
▪ Compatible with Belshaw's Floor Model fryers, Donut Robot® fryers,
Insider Clean Air Cabinet, and Snack Master.
▪ Can be used with any donut shortening, including Zero Trans Fat
shortening
▪ Heating element with factory set thermostat to 225°F/107°C. Element
tilts up for easy tank cleaning.
▪ Long-life synthetic filter screen that needs only annual replacement
under normal conditions.
▪ Heavy duty pump & motor for pumping shortening to the fryer on
Options
EZMelt 34 Shortening Melter-Filter (w/optional Refill Hose)
demand
▪ Moisture repellent foot switch for activating pump
▪ Cube cutter for fast melting of solid shortening blocks up to 50lbs
(22.7kg)
▪ Detachable, hand held rinse hose with plated steel nozzle and heat
resistant handle.
▪ High-temperature limit switch
▪ Heavy duty stainless steel frame, tank and casters
▪ Certified by ETL to NSF-4, CSA-C22.2, and UL-1889
▪ Numerous worldwide voltages (see over page)
▪ Refill Hose (see above photos). Heat resistant hose with plated
steel nozzle designed to attach to designated Belshaw fryers. The
quickest and safest method of refilling the fryer when shortening
level is low.
90 Years of Quality Donut & Bakery Equipment
BELSHAW ADAMATIC BAKERY GROUP
814 44th St NW, Suite 103
Auburn, WA 98001 USA
PART OF ALI GROUP SPA
©Belshaw Adamatic Bakery Group Product specifications may be changed without notice. Current version available at www.belshaw-adamatic.com
CONTACT
800.578.2547 (USA/CANADA)
(+1)206.322.5474 Worldwide
service@belshaw.com
WEB
www.belshaw-adamatic.com
www.belshaw.com
www.adamatic.com
EZ18-24-34/
03-2013
Page 1 of 2

Product Line
SHORTENING MELTER-FILTERS
EZ18-24-34/
EZMelt 18, EZMelt 24, EZMelt 34
03-2013Model
Model Selection
Model
EZMelt 18 618, 718LCG, 718LFG
EZMelt 24 624, 724CG, 724FG 24 x 22 x 16 inches (61 x 56 x 41 cm) 26 Gallons (97 liters) 190 lbs (86.5 kg)
EZMelt 34 734CG, 734FG, Donut Robot® Mark
Recommended for
Fryer models
Donut Robot® Mark II, Mark II GP,
Mark II-Gas, Mark II GP-Gas, Mark V,
Mark V GP, Insider
VI, Mark VI-Deep, Snack Master
Tank Dimensions
(Width x Depth x Height)
26 x 16 x 16 inches (66 x 41 x 41 cm) 20 Gallons (76.4 liters) 150 lbs (68.1 kg)
29 x 32 x 13 inches (29 x 32 x 13 cm) 37 Gallons (138 liters) 272 lbs (123.5 kg)
Shortening Capacity
(by volume, approximate)
Shortening Capacity
(by weight, approximate)
Accessories (Filter Screens and Refill Hoses)
▪ 'Right Hand Operation' as stated below=Operator stands in front of fryer kettle 'Left Hand Operation'=Operator stands behind fryer control panel
▪ For correct selection of Fill Hoses for Mark II, V and VI, please contact Belshaw at 800-578-2547 or service@belshaw.com before ordering
Item Nbr Description Connects from... Connects to....
SM100-0002 Synthetic mesh filter screen for EZMelt 18 and EZMelt 24 (1 screen supplied standard with new machines)
EZ34-0027 Synthetic mesh filter screen for EZMelt 34 (1 screen supplied standard with new machines)
EZ18-0506 Fill Hose EZMelt 18 618L, 718LCG, 718LFG
EZ24-0505 Fill Hose EZMelt 24 624, 724CG, 724FG
EZ34-0505 Fill Hose EZMelt 34 734CG
SM100-0507RH Fill Hose, 30" long, Right hand operation EZMelt 18 Mark II / II GP Mark V / V GP
SM100-0507LH Fill Hose, 30” long, Left hand operation EZMelt 18 Mark II / II GP Mark V / V GP
SM100-0507LH-42 Fill Hose, 42" long, Left hand operation, INSIDER EZMelt 18 Mark II / II GP Mark V / V GP
EZ6-0507 Fill Hose, 48" long, Left hand operation EZMelt 34 Mark VI / Snackmaster
EZ6-0510 Fill Hose, 48" long, Right hand operation EZMelt 34 Mark VI
EZ6-0510R Fill Hose, 60" long, Right hand operation EZMelt 34 Mark VI
SPEC
Electrical Data
All Models 120V/50-60/1 208-240V/50-60/1 240V/50/1
EZMelt 18-24-34 1.8 KW, 15 A 1.8/2.3 A, 9.5/10.3 KW 2.25 KW, 10.3 A
Nema L5-20P Nema L6-20P No plug supplied
▪ Other worldwide voltages may be available
Certifications
Certified by ETL to UL-1889, NSF STD 4, and CSA
C22.2
Models shipped to European Union conform to CE
Machine Dimensions and Shipping Data
DEPTH
INSERTS THIS WAY
UNDER FLOOR
MODEL FRYERS
HEIGHT
Shipping data and freight class are estimates for North America only. Shipments are usually in carton. International shipments may be on pallet.
Model
EZMelt 18 22 x 28 x 26 inches (54 x 71 x 66 cm) 27 x 28 x 27 inches (39 x 71 x 69 cm) 120 lbs (55 kg) 150
EZMelt 24 24 x 22 x 16 inches (61 x 56 x 41 cm) 27 x 28 x 27 inches (39 x 71 x 69 cm) 130 lbs (59 kg) 150
EZMelt 34 29 x 32 x 13 inches (29 x 32 x 13 cm) 40 x 48 x 34 inches (102 x 122 x 87 cm) 250 lbs (114 kg) 150
Machine Dimensions
(Width x Depth x Height)
WIDTH
Shipping carton dimensions
(Width x Depth x Height) Weight
RINSE HOSE
(HANDHELD,
SUPPLIED WITH
EACH MACHINE)
requirements, unless stated
REFILL HOSE
(ATTACHES
TO FRYER,
OPTIONAL)
Freight
Class
90 Years of Quality Donut & Bakery Equipment
BELSHAW ADAMATIC BAKERY GROUP
814 44th St NW, Suite 103
Auburn, WA 98001 USA
PART OF ALI GROUP SPA
©Belshaw Adamatic Bakery Group Product specifications may be changed without notice. Current version available at www.belshaw-adamatic.com
CONTACT
800.578.2547 (USA/CANADA)
(+1)206.322.5474 Worldwide
service@belshaw.com
WEB
www.belshaw-adamatic.com
www.belshaw.com
www.adamatic.com
SPEC
EZ18-24-34/
03-2013
Page 2 of 2