Adamatic BARP-1 Specifications

Download

Page 1

belshaw-adamatic.com

Serving the donut and bakery industry for over 85 years

1-800-578-2547 ▪ [email protected] ▪ www.belshaw-adamatic.com

Belshaw Adamatic

BARP-1 Series Retarder-Proofer, 1-Door, Roll-in

Construction

Stainless steel exterior with 300 Series s/s interior and aluminized ▪ steel top

Foamed insulation in walls ceilings and doors ▪ Modular wall and ceiling panels with cam lock construction ▪ Rapid responding air-wash heat and humidity system ▪ Heavy duty welded s/s hinges ▪ Depth up to 120”, capacity up to 6 racks ▪

208/240 VAC, either 1 or 3-phase, eld convertible ▪ Refrigeration components compatible with R404A refrigerant ▪

Includes condenser standard ▪

Operation

Dual purpose, provides both proong and retarding ▪ 70°-120° F proong range ▪

34°-45° F retarding range ▪ 50-99% humidity range ▪ Non-submerged calrod type heaters ▪ Evaporators sized for high humidity levels, prevents drying ▪ Refrigeration system sized for rapid pull down ▪ Interior bumpers protect interior walls from damage ▪ Lighted interior ▪

Controls

Digital set Temperature, Humidity, Time ▪ PID type controls for rapid accurate response without overshoot ▪ Operates in individual modes or automatic mode ▪ All digital controls mounted in the door at eye-level ▪ Large LED display ▪ Real-time clock ▪

Options

Stainless steel oor ▪ Refrigeration condenser (requires separate connection) ▪ Prison package ▪

Model/Rack Capacity*

Model/Depth Side Load

28.4”Wx18.0”D

End Load

26.0”Wx20.4”D

Double

28.4”Wx36.0”D

BAP-1-40 1 Rack 1 Rack N/A

BAP-1-50 2 Racks 2 Racks 1 Racks

BAP-1-60 2 Racks 2 Racks 1 Racks

BAP-1-70 3 Racks 3 Racks 1 Racks

BAP-1-80 4 Racks 3 Racks 2 Racks

BAP-1-90 4 Racks 4 Racks 2 Racks

BAP-1-100 5 Racks 4 Racks 2 Racks

BAP-1-110 5 Racks 5 Racks 2 Racks

BAP-1-120 6 Racks 5 Racks 3 Racks

BARP-1-40 Retarder Proofer

Short Bid Specication

Retarder-Proofer Model BARP-1-xxx [insert 40 thru 120]

shall be a 5 to 13.2 kW electrically heated, single door roll-in rack

unit with: quick responding air-wash heat / humidity system; high output refrigeration system that includes the solenoid valve(s), expansion valve(s), line dryer(s) and epoxy coated evaporator coils; modular cam lock panel construction with foamed insulation; all stainless steel interior, with protective

cart bumpers; heavy-duty door with magnetic seal/mechanical closure system and full width protective bar handle; simple

computerized controls, door mounted at eye-level, with accurate digital temperature, humidity and time readouts; plus all the features listed and options listed.

Standard Product Warranty

One-Year Parts and Labor, USA and Canada. (USA includes 50 states + DC unless specied)

Certications

*Racks may be snug at maximum capacity. For details of rack arrangement, see the

Rack Capacity Guide at http://www.belshaw-adamatic.com/specs/belshaw-adamatic- rack-capacity-guide.pdf

BELSHAW ADAMATIC BAKERY GROUP 206-322-5474 ▪ 800-578-2547 ▪ [email protected] 814 44th St NW, Suite 103, Auburn, WA 98001 USA • www.belshaw-adamatic.com

Page 2

BARP-1 Series Retarder-Proofer, 1-Door

with ceiling-mounted Condenser

Add 11 .80

38.50

34.0

Inside Width

Inside Depth

91.4

31.63

Opening Width

74.1

Opening Height

37.00

3.7

for Drain

13.5

for Water

and

Electrical

4.0

Drain

88.00

[Front][Side] [Top]

Specications

Model

Retarder BTU’s *

BARP-1-40 3500

Height Width Depth Approx Weight (lbs)

Int Ext Int Ext “A” “B” “C” “D” Actual Ship

79” 32.1” 49.3” 41” 900 1000

BARP-1-50 3500 89” 42.1” 59.3” 51” 991 1116

BARP-1-60 4500 99” 52.1” 69.3” 61” 1094 1219

BARP-1-70 4500 109” 62.1” 79.3” 71” 1197 1322

BARP-1-80 5500 119” 72.1” 89.3” 81” 1321 1446

74.1” 91.4” 33.0” 38.7”

BARP-1-90 5500 129” 82.1” 99.3” 91” 1424 1549

BARP-1-100 7000 139” 92.1” 109.3” 101” 1527 1652

BARP-1-110 7000 149” 102.1” 119.3” 111” 1651 1776

BARP-1-120 9000 159” 112.1” 129.3” 121” 1754 1879

Electrical Requirements

Model Voltage Total kW 1-Phase 3-Phase Condenser

BARP-1-(all models) 208 VAC 5 kW 24.0 A 13.8 A

240 VAC 6.6 kW 27.5 A 15.8 A

Volts: 208/240/60/1 Amps: 6A-18A. Condenser model depends on target minimum temperature chosen.

Condenser specs: http://www.belshaw-adamatic.com/specs/ belshaw-adamatic-retarder-proofer-BARP-condenserspecs.pdf

Water Supply and Drainage Requirements

Model Water Supply Drainage

BARP-1-(30 thru 80) 1/2” NPT .07 GPM @ 60 PSI

BARP-1-(90 thru 120) 1/2” NPT .14 GPM @ 60 PSI

1/2”PVC; 110°F <1 GPM Max, Vented

Freight Class=70

* BTU Rating @35°

Overall Depth

Installation Requirements

Requires on-site installation ▪ Refrigeration condenser requires separate connection ▪

KD shipment. When disassembled, can t through 36” opening ▪ Consult factory for shipment fully assembled ▪ 208/240 VAC, either 1 or 3-phase, eld convertible ▪

1/2” NPT cold water conection ▪ 1/2” PVC vented drain connection ▪ Refrigeration system must be installed by a licenced refrigera- ▪

tion technician This appliance is designed to operate at normal room ▪

temperatures; if installed next to an oven or other heat source allow a minimum clearance of 4” to prevent heat transfer.

Clearance from combustibles is 0.0” sides and back ▪ 2” right side clearance required for door to open 90° ▪

For install on non-porous surfaces only ▪ Your local water conditions may damage your appliance. ▪

Failure to properly treat water may result in damage and may void your warranty. Ensure that your water supply meets these

minimum water quality specications:

Alkalinity: 22 ppm Aluminum: 17 ppm Calcium: 3.3 ppm Free chlorine residual: 0.6 ppm Magnesium: 0.65 ppm PH range: 8.5 s.u. Sodium: 8.5 ppm Total Hardness: 11.9 ppm -

Consult your local water treatment company for proper water ▪

ltration system.

BELSHAW ADAMATIC BAKERY GROUP 206-322-5474 ▪ 800-578-2547 ▪ [email protected] 814 44th St NW, Suite 103, Auburn, WA 98001 USA • www.belshaw-adamatic.com