Product Line INSIDER Ventless Donut Center
The Insider is Belshaw’s distinctive donut frying system
•
that eliminates the need for a standard exhaust hood.
With its ability to operate indoors, the Insider offers unique
benefits:
- The Insider can be easily moved from one place to
another. The exhaust hood is built-in and there is no
exterior ductwork.
- Customers in high traffic areas can watch the Insider
frying donuts automatically. The operator has only to
mix batter, fill the Donut Robot
from the Roto-Cooler, a rotating tray that collects the
donuts automatically.
- The Insider eliminates the purchase and installation
cost of standard ventilation and fire suppression hoods.
The Insider is designed to attract the interest of
•
passers-by. With its large window viewing area and
attractive appearance the Insider has great merchandising
potential. Vehicle-style graphic wraps can easily be
applied to top, bottom and side panels.
The Insider addresses fire prevention, air filtration, and
•
sanitation requirements. Cabinet and fryers are tested by
ETL and listed to UL-197, UL-710B, CSA C22.2 and NSF-4
standards.
®
hopper and bag donuts
Models
INSIDER/Mark II • INSIDER/Mark V
VIDEO: https://vimeo.com/belshaw/insider
COMPONENTS OF INSIDER DONUT SYSTEM
Insider Clean-Air Cabinet
•
Donut Robot® Fryer, either:
•
- Mark II
- Mark II GP (mini donut model)
- Mark V
- Mark V GP (mini donut model)
EZMelt 18 Melter-Filter.
•
- The EZMelt can be placed inside the cabinet directly
below the fryer. It will quickly empty, filter and refill the
shortening in the fryer.
Roto-Cooler.
•
- Rotating tray that collects donuts after frying.
Donut Robot® Mark II / Mark II GP Donut Robot® Mark V / Mark V GP
Photo shows Insider with Donut Robot® and Roto-Cooler with sample graphic wrap.
Inset shows Mark II and Mark V GP. The Insider accepts either Mark II • Mark II GP • Mark V • Mark V GP
EZ Melt 18 Roto-Cooler Insider / Mark V (without graphic wrap)
90 Years of Quality Donut & Bakery Equipment
BELSHAW ADAMATIC BAKERY GROUP
814 44th St NW, Suite 103
Auburn, WA 98001 USA
PART OF ALI GROUP S.P.A.
CONTACT
800.578.2547 (USA/Canada)
(+1) 206.322.5474 Worldwide
info@belshaw.com
© 2015 Current version available at www.belshaw-adamatic.com
WEB
www.belshaw-adamatic.com
Page 1 of 2
Product Line INSIDER Ventless Donut Center
Models
INSIDER/ MARK II: 84" (213 cm)
INSIDER/ MARK V: 96" (244 cm)
DONUT ROBOT
ROTO COOLER
FIRE SUPPRESSION
MANUAL PULL STATION
WET FIRE
SUPPRESSION
CYLINDER
6" (15 cm)
FIRE SUPPRESSION
CONTROL BOX
,
POWER
P
EZMELT 18
MELTER FILTER
OVERALL HEIGHT:
35" (89 cm)
PLUG NEMA #14-50 (1-PHASE)
STANDARD FEATURES - INSIDER CABINET
Air recycling system, with fan-assisted grease filter, electronic filter, and odor
•
filters.
Interlock system to ensure ventilation is active. Fryer is otherwise shut down or
•
unable to start
Donut Robot® fryer (specify model from list below) and Roto-Cooler
•
Fire suppression system (Pyro-Chem Kitchen Knight II, PLC-240/300).
•
Operates automatically, also manually from a pull station.
Stainless steel, plated steel and aluminum construction
•
Removable clear polycarbonate viewing windows.
•
Heavy Duty 4" casters (feet optional)
•
COMPATIBILITY WITH DONUT ROBOT® FRYERS
Insider is compatible only with Donut Robot® Mark II, Mark II GP, Mark V, or Mark
V GP
For standard size donuts, use Donut Robot® Mark II or Mark V
•
For mini donuts, use Donut Robot® Mark II GP or Mark V GP
•
To make standard size AND mini donuts, use Donut Robot® Mark II or Mark V,
•
along with Mini Donut Hopper/Plunger Kit, Part #MK-1502-1
See Donut Robot Mark II/Mark V spec sheet for specifications
•
Insider is not compatible with Donut Robot® Gas Mark II/Mark II GP
•
DONUT ROBOT® FRYERS – CAPACITY ESTIMATES
Standard Donuts Mini Donuts
Mark II
Mark II GP –
Mark II with Minidonut Kit
Mark V
Mark V GP –
Mark V with Minidonut Kit
Estimates are based on full capacity at frying times of 95 seconds for standard donuts
and 60 seconds for mini donuts.
37 Dozen/hour –
153 Dozen/hour
37 Dozen/hour 109 Dozen/hour
56 Dozen/hour –
226 Dozen/hour
56 Dozen/hour 163 Dozen/hour
INSIDER/Mark II • INSIDER/Mark V
AIR DISCHARGE
HOOD/CLEAN AIR ASSEMBLY
Clearance 36" (92 cm) Clearance 36" (92 cm)
90" (229 cm)
STOP/START SWITCH
FILTRATION RECEPTACLE
FRYER RECEPTACLE
12" (30 cm)
POWER CORD 72" (183 cm)
NEMA #6-50P (3-PHASE)
OTHER EQUIPMENT
(Optional unless included in Insider Donut System package)
EZ Melt 18 melter-filter system
•
ELECTRICAL INFORMATION
Single power connection.
•
208-240V, 50/60hz, 1ph
•
- Insider with Donut Robot® Mark II/Mark II GP: up to 36 Amps
- Insider with Donut Robot
Contact factory for 3-phase and other voltage options.
•
INSTALLATION
Installation and usage may require approval by local jurisdictions.
(Customer is responsible for such approval)
Clearance
36" (92 cm) space at rear to allow room for operator, and to
•
allow EZMelt 18 Melter Filter to roll out
36" (92 cm) at left side (viewed from rear) for operator access
•
to the left and rear of the unit
18" (45 cm) overhead clearance for air discharge (nominal)
•
SHIPPING WEIGHT AND DIMENSIONS (estimated)
90" W x 43" D x 89" H (228 x 109 x 226 cm)
•
1400 lbs (636 kg)
•
STANDARDS CERTIFICATION
UL197
UL710B
Certified by ETL to UL-197, UL-710B, NSF-4 and CSA C22.2
standards. (ETL Control #68183)
NSF STD 4
CSA C22.2
®
Mark V/Mark V GP: up to 50 Amps
REAR
Nominal clearance
for air discharge
18" (45 cm)
POWER
P
31" (79 cm)
FRONT
90 Years of Quality Donut & Bakery Equipment
BELSHAW ADAMATIC BAKERY GROUP
814 44th St NW, Suite 103
Auburn, WA 98001 USA
PART OF ALI GROUP S.P.A.
CONTACT
800.578.2547 (USA/Canada)
(+1) 206.322.5474 Worldwide
info@belshaw.com
© 2015 Current version available at www.belshaw-adamatic.com
WEB
www.belshaw-adamatic.com
Page 2 of 2
Loading...