Adamatic DELTA Specifications

Adamatic
607 Industrial Way West
Eatontown, NJ 07724
Phone: [phone]
Fax: [phone]
Website: www.adamatic.com

Delta Depositor

Job Item #

• Four axis servo controlled motion can
simultaneously deposit products in four axes

• Forward and backward baking tray conveyor

• Upward and downward hopper movement

• Clockwise and anti-clockwise rotary template

• Forward/suck back deposit pump

• Engineered for heavy and continuous use in a
busy craft or high-speed industrial environment

• Comprised of a steel chassis, heavy castings,
advanced motor and drive technology

• Minimal maintenance

• Programmable electronic control

• Total control of product size, weight, speed of
deposit and complexity of shape is assured

• Fast depositing speed increases output and
improves productivity

• Flexible high density product positioning places up
to 40% more deposits on the tray maximizing
oven space and lowering energy costs

• Easy to use computer software with programming
and operator mode

• High productivity and throughput rate

• Machine can be ordered without a conveyor to
allow installation over a production line. Where a
conveyor is fitted it operates in forward and reverse
and can be supplied to suit your existing
equipment

• Can be used in tandem if required

• Various interchangeable hoppers available

Standard Features: Optional Features and Accessories:

Delta Depositor

© Copyright September 2002 Printed in U.S.A.

TECHNICAL DATA 40 cm 45 cm 58 cm

Weight (lbs.) 853.6 858 871.2

Maximum deposit rate (litre/min) 26 30 40

Maximum deposit rate (litre) 8.5 9.5 12

Standard hopper capacity (litre) 36 41 53

POWER SUPPLY

220v, single phase, 13 amp

Maximum vertical travel 4.4 inches

Minimum distance between rays 2 inches

Noise level Less than 85 dB

Electronics All microprocessor controlled

Note: The above deposit figures are for a machine fitted with a standard pump.
The minimum deposit that can be made depends on several factors: recipe,
mixing method, template size and deposit speed.

PART OF AGA FOODSERVICE GROUP

We reserve the right to change specifications and product design with­out notice. Such revisions do not entitle the buyer to corresponding
changes, improvements, additions or replacements for previously pur­chased equipment.