
Operating Instructions
Slide thumb switch up to turn the strobe into the
ON position.
3
Slide thumb switch down to turn the strobe light
into the OFF position.
Maintenance
Open the battery door in a clean environment, and
only to replace batteries.
Keep battery door O-ring clean and free of debris
accumulation.
Clean battery door thoroughly if necessary to
ensure watertight integrity.
Avoid using abrasive or sharp objects to handle
O-ring.
Lubricate the entire O-ring with silicone based
grease prior to closing to ensure a water-tight
seal.
Inspect O-ring periodically.
Replace if damaged.
5757 Ravenswood Road, Fort Lauderdale, FL 33312 U.S.A
Worldwide: +1 (954) 981-3333 Fax: +1 (954) 983-5087
ACR Electronics, Inc.
www.acrelectronics.com
3
ON
OFF
O-ring
Y1-06-0190 Rev.C