How it Works
Acer
Loading...
X111P
User Guide
70 pgs4.37 Mb0
Table of contents
Loading...

Acer X111P, P1341W, X1340WH, P1340WG User Guide

Acer Projector

X111/X1140/X1140A/X111P/X1240/
X1340W/P1340W/P1341W/
X1340WH/P1340WG/H6510BD/
P1500
Series User's Guide
Copyright © 2012. Acer Incorporated. All Rights Reserved.
Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose.
Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated.
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.
TM
"HDMI registered trademarks of HDMI Licensing LLC."
, the HDMI logo and High-Definition Multimedia Interface are trademarks or

Information for Your Safety and Comfort

Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to the external power supply unit:
•
Install the power supply unit before connecting the power cord to the AC power outlet.
•
Unplug the power cord before removing the power supply unit from the projector.
•
If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.
iii
Warnings!
•
Do not use this product near water.
•
Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged.
•
Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.
•
Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.
iv
•
To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.
•
Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices or lamp.
Using electrical power
•
This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
•
Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.
•
If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.
•
Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.
•
This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.
Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.
•
Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.5 meters (14.76 feet) maximum length.
Product servicing
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service personnel when:
•
the power cord or plug is damaged, cut or frayed
•
liquid was spilled into the product
•
the product was exposed to rain or water
•
the product has been dropped or the case has been damaged
•
the product exhibits a distinct change in performance, indicating a need for service
•
the product does not operate normally after following the operating instructions
Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options.
v
Your device and its enhancements may contain small parts. Keep them out of the reach of small children.
Additional safety information
•
Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes.
•
Turn on the projector first and then signal sources.
•
Do not place the product in the following environments:
• Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector are necessary.
• Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up.
• Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shorten the life span and darken the image.
• Locations near fire alarms.
• Locations with an ambient temperature above 40 ºC/104 ºF.
• Locations where the altitudes are higher than 10000 feet.
•
Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It
vi
might cause fire or electric shock. In this case, unplug immediately and contact your dealer.
•
Do not keep using this product to break or drop it. In this case contact your dealer for inspection.
•
Do not face the projector lens to the sun. It can lead to fire.
•
When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power.
•
Do not frequently turn off the main power abruptly or unplug the projector during operation. The best way is to wait for the fan to stop before turning main power off.
•
Do not touch the air outlet grille and bottom plate which become hot.
•
Clean the air filter frequently. The temperature inside may rise and cause damage when the filter/ventilation slots are clogged with dirt or dust.
•
Do not look into the air outlet grille when projector is operating. It may hurt your eyes.
•
Always open the lens shutter or remove the lens cap when the projector is on.
•
Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control.
•
The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement.
•
Do not operate lamps beyond the rated lamp life. It could cause it to break on rare occasions.
•
Never replace the lamp assembly or any electronic components unless the projector is unplugged.
•
The product will detect the life of the lamp itself. Please be sure to change the lamp when warning messages display.
•
When changing the lamp, please allow the projector to cool down, and follow all changing instructions.
•
Reset the "Lamp Hour Reset" function from the Onscreen Display "Management" menu after replacing the lamp module.
•
Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel.
•
Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage.
•
This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.
vii
"Lamp(s) contain Mercury, Dispose Properly."
Caution for Listening
To protect your hearing, follow these instructions.
•
Increase the volume gradually until you can hear clearly and comfortably.
•
Do not increase the volume level after your ears have adjusted.
•
Do not listen to music at high volumes for extended periods.
•
Do not increase the volume to block out noisy surroundings.
•
Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/sustainability01.htm
Mercury advisory
For projectors or electronic products containing an LCD/CRT monitor or display:
Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org
viii

First Thing First

Usage Notes

Do:
•
Turn off the product before cleaning.
•
Use a soft cloth moistened with mild detergent to clean the display housing.
•
Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
Don't:
•
Block the slots and openings on the projector provided for ventilation.
•
Use abrasive cleaners, waxes or solvents to clean the unit.
•
Use under the following conditions:
•
In extremely hot, cold or humid environments.
•
In areas susceptible to excessive dust and dirt.
•
Near any appliance that generates a strong magnetic field.
•
Place in direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit.
Warning:
•
Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes.
•
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
•
Please do not open or disassemble the product as this may cause electric shock.
•
When changing the lamp, please allow the projector to cool down, and follow all changing instructions.
•
This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages.
•
Reset the "Lamp Hour Reset" function from the Onscreen Display "Management" menu after replacing the lamp module.
•
When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power.
•
Turn on the projector first and then the signal sources.
•
Do not use lens cap when projector is in operation.
•
When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp".
Information for Your Safety and Comfort iii
First Thing First viii
Usage Notes viii
Precautions viii
Introduction 1
Product Features 1
Package Overview 2
Projector Overview 3
Projector Outlook 3
Control Panel 4
Remote Control Layout 5
Getting Started 7
Connecting the Projector 7
Turning the Projector On/Off 10
Turning On the Projector 10
Turning Off the Projector 11
Adjusting the Projected Image 12
Adjusting the Height of the Projected Image 12
How to Optimize Image Size and Distance 13
How to Get a Preferred Image Size by Adjusting Distance and Zoom 16

Contents

User Controls 19
Installation Menu 19
Acer Empowering Technology 20
Onscreen Display (OSD) Menus 23
Color 24
Image 27
Setting 31
Management 35
Audio (X1140A/X111P/X1240/X1340W/P1340W/P1341W/ X1340WH/H6510BD/P1500) 36
3D 37
Language 39
Appendices 40
Troubleshooting 40
LED & Alarm Definition Listing 44
Replacing the Lamp 45
Ceiling Mount Installation 46
Specifications 49
Compatibility Modes 52
Regulations and safety notices 56
English

Introduction

Product Features
This product is a single-chip DLP® projector, including the following outstanding features:
•
DLP® technology
•
X111/X1140/X1140A/X111P: Native 800 x 600 SVGA resolution, Auto/4:3/ 16:9 aspect ratio supported X1240: Native 1024 x 768 XGA resolution, Auto/4:3/16:9 aspect ratio supported X1340W/P1340W/P1341W/X1340WH/P1340WG: Native 1280 x 800 WXGA resolution,Auto/Full/4:3 /16:9/L.Box aspect ratio supported H6510BD/P1500: Native 1920 x 1080 1080p resolution,Auto/Full/4:3/16:9/ L.Box aspect ratio supported
•
Enables projecting 3D content via DLP Link Technology: Blu-Ray 3D supported (P1340W/P1341W/X1340WH/P1340WG and H6510BD/P1500) and Nvidia 3DTV Play Ready (H6510BD only)
•
Enriches 3D experience for 2D contents via 2D to 3D convert function (H6510BD only)
•
One-touch "3D" button on remote control allows quick and easy access to the 3D functions (H6510BD only)
•
Acer ColorBoost technology delivers vivid, life-like images
•
High brightness and contrast ratio
•
Versatile display modes enable optimum performance in any situation
•
NTSC/PAL/SECAM compatible and HDTV (720p, 1080i, 1080p) supported
•
Lower power consumption and economy (ECO) mode extends lamp life
•
Dynamic Black / ExtremeEco functions help decrease lamp power consumption and further extend lamp life.
-
Dynamic Black: If turned on, the projector dynamically adjusts the power consumption of the lamp according to the brightness of the image being projected. When projecting darker images the power consumption will be reduced and the contrast of the image will also be enhanced.
-
ExtremeEco: The projector will decrease the power consumption of the lamp by up to 70% when no input signal can be detected for 5 seconds.
•
Acer EcoProjection Technology delivers Intelligent power management approach and physical efficiency improvement
•
Empowering Key reveals Acer Empowering Technology functions for easy adjustment of settings
•
Advanced keystone correction delivers optimum presentations
•
Multi-language Onscreen Display (OSD) menus
•
Manual focus/zoom projection lens
•
2X digital zoom and pan move function
•
Microsoft® Windows® 2000, XP, 7, Vista®, Macintosh OS compliant
1
2
English
Package Overview
This projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing.
Projector Power cord VGA cable
Security card User’s guide (CD-ROM) Remote control
Quick start guide Battery x 2 Carrying case
Dust filter
(Optional)
(Optional)
English
Projector Overview
1
5
6
4
3
2
7
(X111/X1140)
(X1140A/X111P/ X1240/X1340W)
(P1340W/P1341W/ X1340WH)
(H6510BD)
(P1500)
(P1340WG)
Projector Outlook
Front/upper side
# Description # Description 1 Control panel 5 Zoom ring 2 Projection lens 6 Focus ring 3 Tilt adjusting wheel 7 Remote control receiver 4 Power key and Power indicator LED
Rear side
3
# Description # Description 1 Mini USB connector 7 HDMI connector 2 Monitor loop-through output connector 8 Power socket 3 Analog RGB signal/HDTV/component
video input connector
9 Tilt adjusting wheel
4 RS232 connector 10 Kensington™ lock port 5 S-Video input connector
Composite video input connector
6 Audio input connector
11 Component video input
connector
Audio output connector
4
English
Control Panel
1
7
2
3
8
4
9
5
6
10
3
# Function Description 1 LAMP Lamp Indicator LED. 2POWER indicator
LED
3 Keystone Adjusts image distortion caused by tilting projection
4 RESYNC Automatically synchronizes the projector to the input
5 MENU Launches the Onscreen Display (OSD) menu, returns to
6 Power key Refer to the "Turning the Projector On/Off" section. 7 TEMP Temp Indicator LED. 8 SOURCE Chooses RGB, component video, S-Video, composite
9 Four directional
selection keys
10 Empowering key Enables unique Acer functions: eView, eTimer, ePower
Refer to the "Turning the Projector On/Off" section.
(±40 degrees).
source.
the previous step for the OSD menu operation or exits the OSD menu.
video, HDMI or HDTV source. Selects items or makes adjustments to your selection
Management, e3D.
English
Remote Control Layout
X111/X1140/X1140A/X111P/
X1240/X1340W/P1340W/P1341W/
X1340WH/P1340WG/P1500
H6510BD
# Function Description 1 POWER Refer to the "Turning the Projector On/Off" section. 2 ASPECT RATIO To choose the desired aspect ratio. 3 ZOOM Zooms the projector display in or out. 4 RESYNC Automatically synchronizes the projector to the input
5
Keystone
Four directional selection keys
6 Keypad 0~9 Press "0~9" to input a password in the "Setting" >
7 VGA To change source to VGA. This connection supports
8 COMPONENT To change source to Component video. This connector
9 S-VIDEO To change source to S-Video. 10 HDMI™;
HDMI™/DVI
source. Adjusts image distortion caused by tilting projection
(±40 degrees).
Selects items or makes adjustments to your selection.
"Security" OSD.
analog RGB, YPbPr (480p/576p/720p/1080i/1080p), and YCbCr (480i/576i).
supports YPbPr.
To change source to HDMI™ (or DVI). (P1340W/P1341W/ X1340WH/P1340WG/H6510BD/P1500 only)
5
6
English
VZ.JDW00.001
(X1340W/P1340W/P1341W/ X1340WH)
(X111/X1140/X1140A/ X111P/X1240/P1500/P1340WG)
(H6510BD)
# Function Description
11 Infrared
transmitter
12 Empowering key Enables unique Acer functions: eView, eTimer, ePower
13 FREEZE To pause the screen image. 14 HIDE Press "HIDE" to hide screen image; press again to
15 SOURCE Chooses RGB, component video, S-Video, composite
16 MENU Launches the Onscreen Display (OSD) menu, returns to
17 PgUp/PgDn For computer mode only. Use this button to select the
18 VIDEO To change source to composite video. 19 MUTE To turn on/off the volume. 20 WIRELESS;
LAN/WiFi
21
Rewind Play/Pause Stop
Fast-forward 22 SD/USB A (No function) 23 USB B (No function) 24 3D Press to open the 3D menu for adjusting 3D settings.
Sends signals to the projector.
Management, e3D.
display the image.
video, HDMI or HDTV source.
the previous step for the OSD menu operation or exits the OSD menu.
next or previous page. This function is only available when connected to a computer via a USB cable.
(No function)
(No function)
English

Getting Started

RS232
RS232
RBG
RBG
HDTV adapter
D-Sub
D-Sub
7
8
D-Sub
D-Sub
2
5
6
4
2
USB
USB
1
R
W
9
3
Y
Y
5
5
R
W
DVD player, Set-top box,
HDTV receiver
VGA
RS232
Video/S-Video
Output
Display
Speakers
X111/X1140/X1140A/X111P/X1240/X1340W
Connecting the Projector
7
# Description # Description
8USB cable
1Power cord 6S-Video cable
2 VGA cable 7 RS232 cable
3 VGA to component video/HDTV
4 Composite video cable 9 3 RCA component cable
5 Audio cable
adapter
8
English
RBG
D-Sub
HDTV adapter
D-Sub
D-Sub
8
D-Sub
2
6
4
USB
1
R
W
9
Y
Y
5
5
USB
3
7
RS232
RS232
2
10
RBG
R
W
5
DVD player, Set-top box,
HDTV receiver
VGA
RS232
Video/S-Video
Output
Display
Speakers
P1340W/P1341W/X1340WH/P1340WG
# Description # Description
1Power cord 6S-Video cable
2 VGA cable 7 RS232 cable
3 VGA to component video/HDTV
adapter
4 Composite video cable 9 3 RCA component cable
5 Audio cable 10 HDMI cable
8USB cable
English
DVD player, Set-top box,
HDTV receiver
VGA
RS232
Video/S-Video
Output
Display
Speakers
H6510BD/P1500
9
# Description # Description
1 Power cord 7 RS232 cable
2 VGA cable 8 USB cable
4 Composite video cable 9 3 RCA component video cable
5 Audio cable 10 HDMI cable
6S-Video cable
Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector.
10
English
1 & 2
Turning the Projector On/Off
Turning On the Projector
1 Ensure that the power cord and signal cable are securely connected.
The Power LED will light red.
2 Turn on the projector by pressing (POWER) on the control panel or
remote control, and the Power indicator LED will turn blue.
3 Turn on your source (computer, notebook, video player, etc.). The
projector will detect your source automatically.
• If the screen displays "No Signal", please make sure the signal cables are securely connected.
• If you connect to multiple sources at the same time, use "SOURCE" on the control panel or remote control, or the direct source key on the remote control to switch between inputs.
English
Turning Off the Projector
1 To turn the projector off, press the power button. This message
appears:
"Please press power button again to complete the shutdown process"
Press the power button again.
2 The LED Power indicator will turn solid red to indicate standby mode.
3 It is now safe to unplug the power cord.
When Instant Resume is selected:
1 The LED Power indicator will turn RED and blink rapidly after the
projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly.
2 As long as the power cord remains plugged in, you can press the
power button to turn the projector immediately back on anytime during the 2-minute shutdown process.
3 Once the system has finished cooling, the LED Power indicator will
stop blinking and turn solid red to indicate standby mode.
4 It is now safe to unplug the power cord.
Warning indicators:
11
• "Projector Overheated. Lamp will automatically turn off soon." This onscreen message indicates that the projector has overheated. The lamp will automatically turn off, the projector will automatically shut down, and the LED Temp indicator will turn solid red. Contact your local dealer or service center.
• "Fan failed. Lamp will automatically turn off soon." This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED Temp indicator will blink. Contact your local dealer or service center.
Note: Whenever the projector automatically shuts down and
the
LED Temp indicator turns solid red, contact your local
reseller or service center
.
Loading...
+ 49 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use