Page 1
AL 922 TFT LCD MONITOR
CONTENTS
1. INTRODUCTION ..........................................................................................................................................3
Scope .....................................................................................................................................................................3
1.1
1.2 Description............................................................................................................................................................3
2. ELECTRICAL REQUIREMENTS .................................................................................................................4
Standard Test Conditions......................................................................................................................................4
2.1
2.2 Lcd Monitor General Specifica tion.......................................................................................................................4
2.3 Lcd Panel Specification ........................................................................................................................................5
2.4 Input Signals.......................................................................................................................................................11
2.5 Controls ..............................................................................................................................................................15
2.6 White Color Temperature ...................................................................................................................................17
2.7 Power Supply......................................................................................................................................................18
2.8 Plug & Play(Edid)...............................................................................................................................................18
2.9 Audio Technical Specification ............................................................................................................................19
3. VL-901 DISPLAY CONTROL BOARD.......................................................................................................20
Description..........................................................................................................................................................20
3.1
3.2 Features..............................................................................................................................................................20
3.3 Block Diagram....................................................................................................................................................21
3.4 Connector Locations...........................................................................................................................................22
3.5 Connector Type...................................................................................................................................................22
3.6 Connector Pin Assignment..................................................................................................................................22
4. VK901 Control Panel Board .....................................................................................................................25
Description..........................................................................................................................................................25
4.1
4.2 Connector and Switch Locations........................................................................................................................25
4.3 Connector type....................................................................................................................................................25
4.4 Connector pin Assignment..................................................................................................................................25
4.5 Switch definition..................................................................................................................................................26
4.6 LED definition.....................................................................................................................................................26
5. INVERTER BOARD....................................................................................................................................27
Description..........................................................................................................................................................27
5.1
5.2 Electrical characteristics ....................................................................................................................................27
5.3 Connector locations............................................................................................................................................28
6. DC/DC POWER and Audio CKT VM-902 .................................................................................................29
Input:...................................................................................................................................................................29
6.1
6.2 Output:................................................................................................................................................................29
6.3 Efficiency. ...........................................................................................................................................................29
6.4 Connector Locations...........................................................................................................................................29
7. TROUBLESHOOTING ...............................................................................................................................31
Main Procedure..................................................................................................................................................31
7.1
8. MECHANICAL REQUIREMENTS..............................................................................................................36
Vibration and Shock............................................................................................................................................36
8.1
8.2 Package Drop Specification ...............................................................................................................................36
8.3 Dimension Size and Weight.................................................................................................................................37
8.4 Gap Spec.............................................................................................................................................................37
8.5 Tilt Base Rotation ...............................................................................................................................................39
8.6 Swivel Base Rotation...........................................................................................................................................39
8.7 Plastic Material ..................................................................................................................................................40
8.8 GAP Spec............................................................................................................................................................40
9. Power Line Transient Test (IEC 61000-4-4 Fast Transients/Burst)......................................................40
Peak Voltage.......................................................................................................................................................40
9.1
9.2 Polarity ..............................................................................................................................................................40
9.3 Repetition Frequency of the impulse...................................................................................................................40
9.4 Rise-Time ............................................................................................................................................................41
9.5 Impulse Duration ................................................................................................................................................41
9.6 Relation to Power Supply....................................................................................................................................41
1
Page 2
9.7 Burst Duration ....................................................................................................................................................41
9.8 Burst Period........................................................................................................................................................41
9.9 Climatic Conditions ............................................................................................................................................41
9.10 Test Procedure....................................................................................................................................................41
10. Power Line Surge Test (IEC 61000-4-5 Surge) .......................................................................................43
Clima tic Condition..............................................................................................................................................43
10.1
10.2 Test Conditions:..................................................................................................................................................43
11. ENVIROMENT REQUIREMENT................................................................................................................44
Operating............................................................................................................................................................44
11.1
11.2 Storage or Shipment............................................................................................................................................44
12. REGULATION COMPLIANCE...................................................................................................................45
This product comply to the most current revisions of following regulations:.....................................................45
12.1
12.2 E l e ctrostatics Discharge (ESD) ..........................................................................................................................46
13. QUALITY AND RELIABILITY .................................................................................................................... 47
Qu ality Assurance...............................................................................................................................................47
13.1
13.2 Reliability............................................................................................................................................................47
Appendix A: Parts Lists ---------------------------------------------------------------------------------------- 48
Appendix B: Display Unit Assembly------------------------------------------------------------------------- 53
Appendix C: P.C.B.A ASSEMBLY -------------------------------------------------------------------------- 61
2
Page 3
1. INTRODUCTION
1.1 Scope
This specification defines the requirements for the 19” MICRO-PROCESSOR based Multimode supported high resolution color LCD monitor, This monitor can be directly connected
to general 15 pin D-sub VGA connector and DVI-D digital connector, eliminates the
requirement of optional special display card. It also supports VESA DPMS power
management and plug & play function. There is a build-in stereo audio amplifier with
volume control to drive a pair of speakers.
1.2 Description
The LCD monitor is designed with the latest LCD technology to provide a performance
oriented product with no radiation. This will alleviate the growing health concerns. It is also
a space saving design, allowing more desktop space, and comparing to the traditional CRT
monitor, it consumes less power and gets less weight in addition MTBF target is 20k
hours or more.
3
Page 4
2. ELECTRICAL REQUIREMENTS
2.1 Standard Test Conditions
All tests shall be performed under the following conditions, unless otherwise specified.
Ambient light: 225 lux
Viewing distance : 50 cm in front of LCD panel
Warrn up time
All specifications: 30 minutes
Fully functional: 5 seconds
Measuring Equipment: Chroma 2250 signal generator or equivalent, directly
Connected to the monitor under test.
Minolta CA100 photometer, or equivalent
Control settings
User brightness control: Maximum (unless otherwise specified )
User contrast control: Typical (unless otherwise specified )
User red/white balance,
Green/white balance and
Blue/white balance control: In the center (unless otherwise specified )
Power input : 110Vac or 230Vac
Ambient temperature : 20 ± 5 ˚C ( 68 ± 9 ˚ F)
Analog input mode : 1280 x1024 /60 Hz
2.1.1 MEASUREMENT SYSTEMS
The units of measure stated in this document are listed below:
1 gamma = 1 nano tesla
1 tesla = 10,000 gauss
cm = in x 2.54
lb = kg x 2.2
degrees F = [°C x 1.8] + 32
degrees C = [°F - 32]/1.8
u' = 4x/(-2x + 12y + 3)
v' = 9y/(-2x + 12y + 3)
x = (27u'/4)/[(9u'/2) - 12v' + 9]
y = (3v')/[(9u'/2) - 12v' + 9]
nits = cd/(m2) = Ft-L x 3.426
lux = foot-candle x 10.76
2.2 LCD monitor General specification
Panel Type : 19 “ active matrix color TFT LCD
1). FUJITSU FLC48SXC8V
Display size : 376.32mm(H) x 301.056mm(V)
Display mode : VGA 720 X 400 (70 Hz)
VGA 640 X 480 (60/66/70/72/75 Hz)
SVGA 800 X 600 (60/70/72/75 Hz)
4
Page 5
XGA 1024 X 768 (60/70/75 Hz)
SXGA 1280 X 1024 (60/70/75 Hz) standard resolution
Pixel pitch : 0.098x3mm(H) x 0.294mm(V)
Display Dot : 1280 x (RGB) x 1024
Pixel Clock : 25.2 – 135.0MHz
Contrast ratio:
Brightness: 250 cd/m
Response time (Tr/Tf) : 15 /10 msec
Display color : 16777216 (8 bite color)
Viewing angle: L / R ≧ 85 / ≧ 85 ( ≧ 170 degrees horizontal typical)
U / D ≧ 85 / ≧ 85 ( ≧ 170 degrees vertical typical)
Luminance Uniformity : > 70 %
Pc interface: 1). Video : RGB analog 0.7V peak to peak
Sync : TTL positive or negative
2). Digital TMDS
Signal connector : 15 pin Mini D type, (standard VGA video)
DVI-D connector
Audio power : 1Wrms + 1Wrms ( 300Hz – 10kHz (S.P.L. – 10 dB))
Front control : power on/off with LED select (up, down) adjustment (+,-)
Interface frequency
θ
= 0˚ 500 : 1 (typical)
2
(typical)
Horizontal Frequency 24KHz --80KHz(analog), 31.5– 80KHz(digital)
Vertical Frequency 56Hz ----75Hz
Plug & play : Support VESA DDC2B functions
Power Input voltage : Single phase, 50/60HZ, 100VAC to 240VAC ±10%
Total output power : 60 Watt max.
2.3 LCD Panel Specification
2.3.1 LCD Panel Model (FUJITSU FLC48SXC8V)
• Display Type active matrix color TFT LCD
• Resolution 1280 x 1024 pixels
• Display Dot 1280 x (RGB) x 1024
• Display Area 376.32mm(H) x 301.056mm(V)
• Pixel Pitch 0.098x3mm(H) x 0.294mm(V)
• Display Color 16777216
5
Page 6
• Lamp Voltage 700 Vrms typ.
• Lamp Current 7mA rms.( typ). 4 Lamp
• Weight 3200g .
• Optical Specifications
The following items are measured under stable conditions. The optical characteristics
should be measured in a dark room or equivalent state with the methods shown in
Note(4).
Measuring equipment : TOPCON BM-5A, BM-7, PHOTO RESEARCH PR650
(Inverter Freq. : 54kHz) *Ta =25 ± 2°C, VDD=5V, fv=60 Hz, fDCLK=54 MHz, IL= 6.5mArms
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio
(Center of screen)
Response
Time
Luminance of White
(Center of screen)
Color
Chromaticity
(CIE 1931)
Viewing
Angle
Brightness Uniformity
(9 points)
Rising TR - 15 30
Falling T
Red
Green
Blue
White
Hor.
Ver.
CR
F - 10 25
Y
L
Rx 0.648
Ry 0.346
Gx 0.292
Gy 0.602
Bx 0.150
By 0.130
Wx 0.313
Wy
θ
L
θ
R
φ
H
φ
L
UNI
B
Normal
φ
θ
Viewing
Angle
CR≥10
T.B.D 500 -
= 0˚
= 0˚
70 - -
200 250 -
TYP.
-0.03
0.329
85 - -
85 - -
85 - -
85 - -
TYP.
+0.03
msec
cd/m2
Degrees
%
(1)(2)(4)
BM-5A
(1)(3)
BM-7
(5)
BM-5A
(1)(4)
PR650
(1)(4)
BM-5A
(6)
BM-5A
Note 1) Definition of Viewing Angle: Viewing angle range (10≤CR)
6
Page 7
Note 2) Definition of Contrast Ratio (CR): Ratio of gray max(Gmax),gray min(Gmin) at the
center point of panel.
Luminance with all pixels white (Gmax)
CR=
Luminance with all pixels black (Gmin)
Note 3) Definition of Response time: Sum of TR , TF
7
Page 8
Note 4) After stabilizing and leaving the panel alone at a given temperature for 30 min, the
measurement should be executed .Measurement should be executed n a stable,
windless ,and dark room.30 min after lighting the back-light. This should be
measured in the center of screen. Dual lamp current :13.0mA(6.5mA x2)(Refer to
the note(1) in the page 14 for more information ).
Environment condition :Ta=25±2°C
Optical characteristics measurement setup
8
Page 9
Notes 5) Definition of Luminance of White : measure the luminance of white at center point.
Notes 6)Definition of 9 points brightness uniformity (Measuring points: Refer to the Note 5)
Bmin
B
=100∗∗∗∗
UNI
Bmax
Bmax: Maximum brightness
Bmin: Minimum brightness
Notes 7) Definition of Flicker level
Flicker Voltage
pp
F = x 100 %
LMD Voltage
dc
♦♦♦♦ One maximum value of three estimated values.
♦♦♦♦ For this test ,an LMD(Light Measurement Device)is needed with adequate response time
to track any visible rate flicker component and with a voltage level output proportional
To luminance intensity.
♦♦♦♦ Test Pattern: For dot inversion Driving(Gray levels of foreground dots on the test panel
Are G22,G32,and G45)
♦♦♦♦ Test Point :Center point of the display area
9
Page 10
Note 8) Definition of Crosstalk (Refer to the VESA STD)
The calculation for shadowing is made from the 2 luminance measurements Gbkg and Lsh,
as follows:
Lmax -Lmin
C
= x100 %
T
Lmin
Where Lmax is the larger value of Gbkg or Lsh , and Lmin is the smaller of the two.
♦ To determine background and foreground levels (colors),first set the background to any
gray scale or color level suitable for shadowing determination.(Note that it may take
several iterations of adjusting background level and box levels to determine the proper
value for the background .Next display the box levels to determine the proper value for the
background level. Look for shadowing in any direction from box E. Independently vary the
gray level (or color) of the background and box E until the worst case shadowing is
observed. This defines the background (Gbkg) and foreground (Gfg) levels to be
maintained for the remainder of the test.
♦ One point only (the target) will be measured. To determine that point proceed as follows
Using the background and foreground gray levels of step1 (Gbkg and Gfg). Turn on each
box at a time. Look for the case with the worst shadowing. The box causing the worst case
is the shadowing source, or Bsrc. Use Bsrc and the box opposite from it that lies directly in
the shadow path. That is the target box, or Btgt. Note that box Eight be either Bsrc or Btgt,
depending on the shadowing conditions, but typically Bsrc and Btgt will be a pair of
opposite boxes, A&C or B&D. Btgt will only be displayed for aligning the LMD. It will be
turned off for the actual measurement.
♦♦♦♦ The target box point (Btgt) will be measured with the source box (Bsrc) turned on then off.
(Btgt is for alignment purpose only) Display the background only at level Gbkg. Display
Btgt determined in step 2 above. Using the correct distance, angle, and measurement
aperture, align the LMD to the center of the Btgt. Turn off Btgt. With Gbkg set to its proper
level, measure the luminance (or color). Next,turn on the source box Bsrc. Again measure at
the center point of Btgt (without Btgt present.). In this case the LMD will be measuring the
shadowing level, Lsh.
10
Page 11
2.4 Input Signals
2.4.1 Video input
• Type Analog R, G, B., Digital TMDS
• Input Impedance 75 ohm +/- 2%
• Polarity Positive
• Amplitude 0 - 0.7 +/- 0.05 Vp
• Display Color same as LCD panel
2.4.2 Sync input
• Signal separate horizontal and vertical sync, or composite sync
which are TTL compatible
• Polarity positive and negative.
2.4.3 Interface frequency
The following frequency range is generalized by supported timing. If the entered
mode does not match the supported timing the display optimization will not be
assured.
• Horizontal Frequency 24KHz --80KHz(analog), 31.5– 80KHz(digital)
• Vertical Frequency 56Hz ---------75Hz
DISPLAY MODES
MONITOR
MODE NO.
1 640x350 31.5 + 70.0 - 25.0 VGA
2 640X400 24.83 - 56.4 - 21.05 NEC
3 640X400 31.5- 70.0+ 25.0 VGA
4 640X400 31.5- 70.1- 25.19 NEC
5 640X480 31.5 - 60.0 - 25.0 Defacto
6 640X480 35.0- 66.67- 30.24 MAC
7 640X480 37.86- 72.80- 31.5 VESA
8 640X480 37.5- 75.0- 31.5 VESA
9 720X400 31.5 - 70.0 + 28.0 Text Defacto
10 832X624 49.72- 74.55 - 57.28 MAC
11 800X600 35.16+ 56.25+ 36.0 SVGA
12 800X600 37.8 + 60.0 + 40.0 VESA
13 800X600 48.07 + 72.18 + 50.0 VESA
14 800X600 46.87+ 75.0+ 49.5 VESA
15 1024X768 48.4 - 60.0 - 65.0 VESA
16 1024X768 53.96 + 66.13 + 71.66 XGA
17 1024X768 56.47 - 70.07 - 75.0 VESA
18 1024X768 60.0 + 75.0 + 78.75 VESA
19 1024x768 60.24- 75.02- 80.0 MAC-768
20 1280X1024 64.0 + 60.0 + 108.5 SXGA
21 1280X1024 80.0 + 75.0 + 135.0 Defacto
SCREEN
RESOLUTION
HORIZONTAL
SYNC RATE
(kHz)
VERTICAL
SYNC RATE
(Hz)
VIDEO CLK
(MHz)
STANDARD
11
Page 12
Supported Timing
TIMING
FV(HZ) POLARITY (DOT/LINE) (DOT/LINE) WIDTH PORCH PORCH FOREQ.(MHZ)
(DOT/LINE) (DOT/LINE) (DOT/LINE)
640x350 31.469 + 800 640 96 16 48 25.175
VGA-350 70.087 – 449 350 2 37 60
640x400 24.83 – 848 640 64 64 80 21.05
NEC PC9801 56.42 – 440 400 8 7 25
640x400 31.469 – 800 640 96 16 48 25.175
VGA-GRAPH 70.087 + 449 400 2 12 35
640x400 31.5 – 800 640 64 16 80 25.197
NEC PC9821 70.15 – 449 400 2 13 34
640x480 31.469 – 800 640 96 16 48 25.175
VGA-480 59.94 – 525 480 2 10 33
640x480 35.00 – 864 640 64 64 96 30.24
APPLE MAC480
640x480 37.861 – 832 640 40 16 120 31.5
VESA-480-72Hz 72.809 – 520 480 3 1 20
640x480 37.5 – 840 640 64 16 120 31.5
VESA-480-75Hz 75 – 500 480 3 1 16
720x400 31.469 – 900 720 108 18 54 28.322
VGA-400-TEXT 70.087 + 449 400 2 12 35
832x624 49.725 – 1152 832 64 32 224 57.2832
APPLE MAC800
800x600 35.156 + 1024 800 72 24 128 36
SVGA 56.25 + 625 600 2 1 22
800x600 37.879 + 1056 800 128 40 88 40
VESA-600-60Hz 60.317 + 628 600 4 1 23
800x600 48.077 + 1040 800 120 56 64 50
VESA-600-72Hz 72.188 + 666 600 6 37 23
800x600 46.875 + 1056 800 80 16 160 49.5
VESA-600-75Hz 75 + 625 600 3 1 21
1024x768 48.363 – 1344 1024 136 24 160 65
XGA 60.004 – 806 768 6 3 29
1024x768 53.964 + 1328 1024 176 16 112 71.664
COMPAQ-XGA 66.132 + 816 768 4 8 36
1024x768 56.476 – 1328 1024 136 24 144 75
VESA-768-70Hz 70.069 – 806 768 6 3 29
1024x768 60.023 + 1312 1024 96 16 176 78.75
VESA-768-75Hz 75.029 + 800 768 3 1 28
1024x768 60.24 – 1328 1024 96 32 176 80
APPLE MAC768
1280x1024 64 + 1688 1280 112 48 248 108
VESA-102460Hz
1280x1024 80 + 1688 1280 144 16 248 135
VESA-102475Hz
If the input timing is not a supported timing listed above but within the supported frequency
range (Horizontal: 80KHz,Vertical: 75Hz), this monitor will select a closest mode instead. But
the display quality may not be optimized.
If the input timing over the supported frequency range, a message “Input Signal Out of Range”
will be shown.
FH(KHZ) SYNC TOTAL ACTIVE SYNC FRONT BACK PIXEL
66.67 – 525 480 3 3 39
74.55 – 667 624 3 1 39
75.02 – 803 768 3 3 29
60 + 1066 1024 3 1 38
75 + 1066 1024 3 1 38
12
Page 13
2.4.4 85Hz refresh rate Support
Monitor should display 85Hz refresh rate mode as emergency mode.
Monitor should display “Out of Range” warning menu at this mode.
2.4.5 Video input Connector
Analog Video input Connector: 15pins mini D-Sub
Table 2.4.5. Pin assignment for D-sub connector
PIN
NO.
1 RED VIDEO
2 GREEN VIDEO
3 BLUE VIDEO
4 GROUND
5 GROUND
6 RED GROUND
7 GREEN GROUND
8 BLUE GROUND
9 PC5V (+5V DDC)
10 CABLE DETECTION
11 GROUND
12 SDA
13 H.SYNC
14 V.SYNC
15 SCL
Separate Sync
Color of plastic parts: Blue
5 1
10
15
D-sub connector
6
11
13
Page 14
Digital Video input Connector: DVI-D (T.B.D)
Table 4-3-3. Pin assignment for DVI-D (24pin) connector
Pin – Assignment of DVI –D connector :
1 TX2- 9 TX1- 17 TX0-
2 TX2+ 10 TX1+ 18 TX0+
3 Shield (TX2 / TX4) 11 Shield (TX1 / TX3) 19 Shield (TX0 / TX5)
4 NC 12 NC 20 NC
5 NC 13 NC 21 NC
6 DDC-Serial Clock 14 +5V power *) 22 Shield (TXC)
7 DDC-Serial Data 15 Ground (+5V) 23 TXC+
8 No Connect 16 Hot plug detect 24 TXC-
*) In case, the power of the PC unit is switched off and the power of the monitor is switched on,
no voltage may occur at pin 14.
14
Page 15
2.5 CONTROLS
2.5.1 Control panel (monitor front panel)
1. Power LED, will be green when monitor is on; be amber when in power saving mode.
2. Adjust decrease.
3. Adjust increase.
4. Function select counter-clockwise.
5. Function select clockwise.
6. Power ON/OFF switch, push to ON and push to OFF. (toggle switch)
7. Ear phone jack.
8. Volume Control.
Note: When OSD Menu is off, press button 2 can activate “Auto Adjustment” immediately.
2.5.2 OSD Functions
• OSD Format: Refer to following figure.
• OSD Border: Cyan color
• OSD Tunable Item: The 16 icons that around the border.
• Selected Item: Yellow background
• Comment: Magenta foreground, Blue background
page format :
15
Page 16
Description:
• Brightness: Brightness adjustment, the range from 0 to 100.
• Contrast: Contrast adjustment, the range from 0 to 100.
• H. Position: Horizontal position adjustment.
• V. Position: Vertical position adjustment.
• Phase: Focus adjustment, the range from 0 to 31,32 steps.
• OSD position: OSD position adjustment.
• Auto Adjustment: This feature will automatically adjust size, position, clock and phase.
It takes 3-5 seconds to finish. When auto start, it shows “Auto
Adjusting….” message.
• Clock: Frequency tracking adjustment. The max range from -48 to +48, but
some modes the range will be limited.
• Graph Text: 640x400(GRAPH) or 720x400(TEXT) mode select.
• Language: 5 kinds of language for description, including (English, German,
French, Spanish, Italian)
• Recall: Recall the default value.
• Color Temp: Color temperature for standard 9300,6500, 7500 or user defined.
User:
User R: Red signal gain by user defined.
User G: Green signal gain by user defined.
User B: Blue signal gain by user defined.
7500: Set CIE coordinate at 7500°K color temperature.
6500: Set CIE coordinate at 6500°K color temperature.
9300: Set CIE coordinate at 9300°K color temperature.
• Exit: Exit OSD menu function.
Sharpness : Adjust the scale-up effect(smoother or sharper.)
OSD Transparency: Adjust the transparency level of OSD. The range is from 0 to 100 scales.
Comment:
• 1280x1024: Current mode resolution.
• 60 HZ: Current mode vertical frequency±1Hz.
• VER 1.00: Firmware revision.
16
Page 17
Other features:
Intellectual-Auto AL922(AM999) can start the Auto-Adjustment automatically when input
a new display mode at first time. After the adjustment, AL922(AM999) will remember this
mode and switch to optimized condition automatically for this mode whenever encounter
this mode again. Total 21 recent used modes are recorded into AL922(AM999)
VESA DPMS Functionality When signaled by the host CPU, AL922(AM999) show a
black screen about 3 seconds. If no further signal, then it shows “No Signal” and enter
power saving mode.
2.6 White Color Temperature
White color temperature is 4 preset as 9300, 7500,6500 and User,
Default value of user color should be user which is maximum setting for panel.
Target of color setting
Color
Temp.
9300K 0.283 0.297 +0.03 0.189 0.446 u’v’ < 0.01*
7500K 0.299 0.315 +0.03 0.194 0.459 u’v’ < 0.01*
6500K 0.313 0.329 +0.03 0.198 0.469
User - - - - -
User should follow “Microsoft Windows Color Quality Specification for Liquid Crystal Display OEM’s”.
(http://www.microsoft.com/hwdev/tech/color/ColorTest.asp)
Color Coordinate Tolerance Color Coordinate Tolerance
x y u’ v’
*) TCO’0X A.2.6.1 requirement
u’v’ <
0.01*
17
Page 18
2.7 POWER SUPPLY
2.7.1 input Voltage Range
The monitor shall operate within specification over the range of 90 to 265 VAC power supply.
2.7.2 Input Frequency Range
Input power frequency range shall be from 47.5 to 63 Hz over the specified input voltage range.
2.7.3 Quick specification review
• Input current
1.5A (max) at 90VAC input and full load ,
0.75A (max) at 264 VAC input and full load.
• Inrush current @ cold start
30A(0-peak)@ 110Vac ,50A(0-peak) @ 220Vac
(measured when switched off for at least 10 mins.)
• Output
Tolerance Output Current
Output Volt - MIN MAX
Volt Tolerance
+12Vdc
• Total output power: 60 Watt max.
• Withstanding voltage : 1.5Kvac or 2.2KVdc for 1 minute.
• Leakage current : < 0.25mA/100Vac , <3.5mA/230Vac
• Efficiency : 80% min. @115V/230VAC, maximum load.
2.7.4 Power Management
2.7.4.1 Meet VESA DPMS proposal
The monitor must comply with the Microsoft On Now specification, with a minimum of three power
management states, as defined by the VESA DPMS document. The front panel of the monitor must
appropriately display the DPMS state, For example:
DPMS ON : The power LED is Green
DPMS OFF : The power LED is Amber
2.7.5 Power Consumption
On mode 56 Wmax Green
Off mode 4 Wmax Amber
DC power off 4 Wmax Dark
disconnection 4 Wmax
Power saving states are measured with speakers attached but not worked.
The recovery time from off mode to on mode is 3 seconds maximun.
±5%
0A 5A 11.4~12.6Vdc
Dark (DC power off)
Amber (DC power on)
2.7.6 Power Connector
All units shall have an IEC/CEE-22 type male power receptacle.
2.8 Plug & Play(EDID)
The monitor will be capable of sending a VESA standardized EDID file through the DDC (pins 12,
15 of the VGA connector).
18
Page 19
2.9 Audio Technical specification
2.9.1 General Description:
Output power : 1W + 1W maximum
Total harmonic distortion : Less than 1 % (except speakers distortion)
Input signal sensitivity : 0.5 Vrms for full output
Input impedance : 47 Kohm +/- 5 %
Frequency response range : 20Hz – 20kHz (except speakers response)
Difference of L and R output : Less than 2 dB
2.9.2 Electrical characteristics (Tamb=25
°°°°
)
Audio amplifier(USE Panasonic VP-7723A Audio Analyzor. )
Spec. Item Audio Input Freq.
Comment
Min. Typ. Max.
Input Voltage(V) - 5 -
Input Current(m A) - 500 800
Audio Voltage Gain 500m Vrms 1KHz - - 6 d B Volume Max.,load 4 Ω
Frequency Response 500m Vrms 300Hz-20KHz -10dB - +10d B Volume Max.,load 4 Ω
Signal to Noise ratio 500m Vrms 1KHz - - -40dB Volume Max.,load 4 Ω
Total harmonic distortion 500m Vrms 1KHz 1% except speakers distortion
Cross talk 500m Vrms 1KHz - - -30dB Volume Max.,load 4 Ω
Output Watt. 500m Vrms 1KHz - - 1W Volume Max.,load 4 Ω
Volume Control - - - Analog
2.9.3 Speakers
Maximum power : 2 W per speaker(max)
Impedance : 4 ohm +/- 15 % @ 1kHz 1.0Hz
Frequency response range : 350 Hz – 15 kHz (S.P.L. – 10 dB)
Total harmonic distortion : Less than 5 % @ 0.125 W 1kHz
2.9.4 Headphone output
Output power : 1.6 mW for 32 ohms Headphone
19
Page 20
3. VL-901 DISPLAY CONTROL BOARD
3.1 Description
The VL-901 display control board is design to directly convert the analog RGB signals from
standard VGA display card to optimum LCD timing signals so as to construct a high display
quality LCD monitor.
3.2 Features
On board embedded micro-processor to detect display timings and control user
•
functions.
• Using Genesis gm5120 design to generate optimum LCD timings.
2
• Using E
• support up to 22 display modes from VGA to SXGA.
• Offer full screen expansion function on non-SXGA mode (automatic).
• flexible color temperature selection function including 9300,6500,7500 and user
mode.
PROM to memorize every adjusted parameter.
• Support OSD functions.
• Support VESA DPMS function.
• Support DDC2B functions.
• Support 5 languages for OSD description.
• The longest time for mode change is 3 seconds.
20
Page 21
3.3 BLOCK DIAGRAM
21
Page 22
3.4 Connector Locations
3.5 Connector Type
Location Type Maker Number of pins
CN1 74320-4004 MOLEX 24
CN2 1211-15 E&T 15
CN4 6905-40 E&T 40
J1 4300-10 E&T 10
J2 4500-07 E&T 07
3.6 Connector pin assignment
3.6.1 CN2
Pin NO. Signal Comment
1 R-Video Red Video Input.
2 G-Video Green Video Input.
3 B-Video Blue Video Input.
4 N. C.
5 Ground Ground.
6 Ground Ground.
7 Ground Ground.
8 Ground Ground
9 5VCC DDC Power Input.
10 PCDETECT PCDETECT Input.
11 NC NC
12 SDA DDC 2B
13 HS Horizontal Sync Input.
14 VS Vertical Sync Input.
15 SCL DDC 2B
22
Page 23
3.6.2 CN4
Terminal No. Symbol Function
36,37,38 VDD 5V POWER S UP PLY
1 TXE0- LVDS EVEN OUTPUT DATA PAIRS
2 TXE0+ LVDS EVEN OUTPUT DATA PAIRS
4 TXE1- LVDS EVEN OUTPUT DATA PAIRS
5 TXE1+ LVDS EVEN OUTPUT DATA PAIRS
7 TXE2- LVDS EVEN OUTPUT DATA PAIRS
8 TXE2+ LVDS EVEN OUTPUT DATA PAIRS
10 TXECLK- LVDS EVEN OUTPUT DATA PAIRS
11 TXECLK+ LVDS EVEN OUTPUT DATA PAIRS
13 TXE3- LVDS EVEN OUTPUT DATA PAIRS
14 TXE3+ LVDS EVEN OUTPUT DATA PAIRS
16 TXO0- LVDS ODD OUTPUT DATA P AIRS
17 TXO0+ LVDS ODD OUTPUT DATA PAIRS
19 TXO1- LVDS ODD OUTPUT DATA PAIRS
20 TXO1+ LVDS ODD OUTPUT DATA PAIRS
22 TXO2- LVDS ODD OUTPUT DATA P AIRS
23 TXO2+ LVDS ODD OUTPUT DATA PAIRS
25 TXOCLK- LVDS ODD OUTPUT DATA PAIRS
26 TXOCLK+ LVDS ODD OUTPUT DATA PAIRS
28 TXO3- LVDS ODD OUTPUT DATA P AIRS
29 TXO3+ LVDS ODD OUTPUT DATA PAIRS
03,06,09, 12 GND Ground
15, 18, 21, 24 GND Ground
27, 30, 34, 35 GND Ground
39,40 GND Ground
3.6.3 J2
Pin NO. Signal Comment
1,2 5 VCC 5V Power Input
3,4,5 GND GND
6 BLON Bright Light ON/OFF.
7 BRIGHT Brightness Adjustment.
23
Page 24
3.6.4 J1
Pin NO. Signal Comment
1 NC NC
2 LED-Y Power saving mode
3 LED-G Monitor is ON
4 GND GND
5 KEY-POWER Power ON/OFF key
6 KEY-DOWN Function select counter-clockwise key
7 KEY-R Adjust up key
8 KEY-L Adjust down key
9 KEY-UP Function select counter-clockwise key
10 GND GND
3.6.5 CN1 Digital Video input Connector: DVI-D
Pin-Assignment of DVI-D(24 pin) connector
1 TX2- 9 TX1- 17 TX02 TX2+ 10 TX1+ 18 TX0+
3 Shield (TX2 / TX4) 11 Shield (TX1 / TX3) 19 Shield (TX0 / TX5)
4 NC 12 NC 20 NC
5 NC 13 NC 21 NC
6 DDC-Serial Clock 14 -5V Power *) 22 Shield (TXC)
7 DDC-Serial Data 15 Ground (+5V) 23 TXC8 No Connect 16 Hot plug detect 24 TXC+
*)In case, the power of the PC unit is switched off and the power the monitor is switched
on, no voltage may occur at pin 14.
24
Page 25
4. VK901 Control Panel Board
4.1 Description
The VT-901 is designed to offer a user interfaced control panel which passes and receives
signals to and from VL-901 display control board.
4.2 Connector and Switch Locations
4.3 Connector type
Location Type Maker Number of pins
J1 4500-10 E&T 10
J6 4500-11 E&T 11
J3 87502-0200 ACER 2
J4 87502-0200 ACER 2
J2 SCJ-0348-C SC 9
4.4 Connector pin Assignment
4.4.1 J1
Pin NO. Signal Comment
1 NC NC
2 LED-Y Power saving mode
3 LED-G Monitor is ON
4 GND GND
5 KEY-POWER Power ON/OFF key
6 KEY-DOWN Function select counter-clockwise key
7 KEY-R Adjust up key
8 KEY-L Adjust down key
9 KEY-UP Function select counter-clockwise key
10 GND GND
4.4.2 J6
Pin NO. Signal Comment
1 VOL Volume ON/OFF Control
2 GND GND
3 LIN1 Audio Volume Adjust Line INL
4 RIN1 Audio Volume Adjust Line INR
5 RIN2 Audio Volume Adjust Line OUTR
25
Page 26
6 LIN2 Audio Volume Adjust Line OUTL
7 GND
8 R-EAR EAR Phone Out R
9 L-EAR EAR Phone Out L
10 ROUT Speaker Out R
11 LOUT Speaker Out L
4.5 Switch definition
Location Definition
S5 Power ON/OFF
S1 Function select by clockwise direction
S4 Function select by counter-clockwise direction
S3 Adjust up
S2 Adjust down
4.6 LED definition
Location Definition
D1 Green for ON mode; Yellow for OFF mode; yellow for Power Saving
mode; Dark for DC power OFF mode.
26
Page 27
5. INVERTER BOARD
5.1 Description
The Inverter board is designed for lighting up the back-lights of LCD module.
5.2 Electrical characteristics
5.2.1 FOR Fujitsu PANEL FLC48SXC8V
MIN. TYP. MAX. COMMENT
INPUT VOLTAGE 11.4V 12.0V 12.6V 12V±5%
INPUT CURRENT -------- 2A _
Normal BACKLIGHT
VOLTAGE
LAMP CURRENT
DRIVING
FREQUENCY
EFFICIENCY -------- 80% --------
Vin ON/OFF sequence -------- 1S --------
OLP TIME -------- 3S _
BRIGHTNESS
RANGE
Brightness control 0V _ 3.3V
Brightness _ 220cd/m
Strike voltage at 0°C 1600 Vrms _ _
-------- 700V rms. --------
--------. 7mA rms 8mA rms
40KHz 50KHZ 60KHz
10% -------- 100%
2
_
Vin=12V,
Vbrite=3.3V
Vin = 12V,max
brightness
Open lamp
protection time
3.3V, brightness
Max.
Operating life time 20,000 hrs _ _ (note)
Note:
Life time (hr) can be defined as the time in which it continues to operate under the condition:
Ta=25±2°C, IL =7 mArms until one of the following event occurs:
1. When the brightness becomes 50 %
2. When the startup voltage (Vs) at 0°C becomes higher than the maximal value of Vs specified above.
27
Page 28
5.3 Connector locations
5.3.1 Connector type
J2 J1
J3 J4
CM999-E04
Location Type Maker Number of pins
JN2, JN3, SM02 (8.0)B-BHS ST 2
JN4, JN5
JN1 85205-1200 E&T 12
5.3.2 Connector pin assignment
5.3.2.1 J2,J3,J4,J5
Pin NO. Signal Comment
1 HV High voltage for lamp
J5
5.3.2.2 JN1
Pin NO. Signal Comment
3.3 V for max. brightness (for Fujitsu model)
3 LV Low voltage (common)
1, 2, 3,4 BP+ +12V
7 BLT_ON Back-light ON/OFF control, high active (3.3V)
5, 6, 10, 11, 12 GND
8 +5VS +5VS
9 BRITE BRITE Brightness (0-3.3V) control from I/F
28
Page 29
6. DC/DC POWER and Audio CKT VM-902
6.1 Input:
+12V/5A from AC adapter
6.2 Output:
ITEM Output Voltage Max Load. Min Load Tolerance Ripple & Noise(max)
VCC +5V 2.1A 0.1A
±5 %
6.3 Efficiency: 80 % min at Maximum Load.
6.4 Connector Locations
6.4.1 Connector type for VM-902
Location Type Maker Number of pins
J801 DC-IN SC 2
200mVpp
J802 4500-12 E&T 12
J803 4500-07 E&T 7 (for LCM999 only)
J2 4500-11 E&T 11
6.4.2 Connector pin Assignment
6.4.3 J801 DC 12V Input
Pin No Signal Comment
Pin 1 +12V From adapter output cable
Pin 2 GND From adapter output cable
29
Page 30
6.4.3.1 J802 FOR I/F CKT
Pin No Signal Comment
Pin 1,2,3,4 +12V From adapter +12V power
Pin
5,6,10,11,12
GND GND
Pin 8 +5V Supply for I/F CKT
Pin 7 ON/OFF
Pin 9 BRIGHT
6.4.3.2 J803 FOR M/B CKT
Pin No Signal Comment
Pin 1,2 +5V For M/B +5V power
Pin 3,4,5 GND GND
Pin 6 BLON Bright Light On/ Off
Pin 7 BRIGHT Brightness Adjustment
6.4.3.3 J3 FOR Audio input(for AM999 only)
Pin No Signal Comment
Pin 1 GND GND
Pin 2 Audio IN (1) From Audio output (1)
Pin 3 Audio IN (2) From Audio output (2)
ON/OFF Control ON>3.0V OFF <2.0V
Lamp Current Control (0V to 3.3V) ,
3.3V for max brightness
6.4.3.4 J2 TO Speaker CKT(for AM999 only)
Pin No Signal Comment
Pin 1 VOL Volume ON/OFF control
Pin 2 GND GND
Pin 3 LIN1 Audio volume adjust line INL
Pin 4 RIN1 Audio volume adjust line INR
Pin 5 RIN2 Audio volume adjust line OUTR
Pin 6 LIN2 Audio volume adjust line OUTL
Pin 11 GND
Pin 7 R-EAR EAR phone out R
Pin 8 L-EAR EAR phone out L
Pin 9 ROUT Speaker out R
Pin 10 LOUT Speaker out L
30
Page 31
7. TROUBLESHOOTING
7.1 Main Procedure
31
Page 32
7.1.1 Power Circuit Troubleshooting
32
Page 33
7.1.2 Backlights Troubleshooting
33
Page 34
7.1.3 Performance Troubleshooting
34
Page 35
7.1.4 Function Troubleshooting
35
Page 36
8. MECHANICAL REQUIREMENTS
8.1 Vibration and Shock
All testing shall be done in each of three mutually perpendicular axes, referenced to the
position of the system as it is in front of the user (i.e., front-to back, side-to-side, and top-tobottom).
8.1.1 Non-Operating
The unit should suffer minimal visible cosmetic damage or damage that presents a safety
hazard, or impairs the setup and operation of the system after testing.
Sinusoidal Vibration: 0.75 G zero-to-peak, 10 to 500Hz, 0.5 octave / minute sweep rate.
This requires one sweep, 10 to 500 to 10Hz, along each of the three axes.
Random Vibration: 0.008 G
one hour for each of the three axes.
Half Sine Wave Shock: 120 G peak, half sine pulse, 2 ms pulse duration. Testing shall
consist of one shock in each direction in each axis, for a total of 6 shock inputs.
Square Wave Shock: 40 G peak acceleration, 160 inches / second velocity change. There
shall be one shock in each direction in each axis, for a total of 6 shock inputs.
2
/Hz, 10 to 500 Hz, nominal 2 GRMS. The test shall be for
8.2 Package Drop Specification
Listed below are standards of drop heights for monitor product
Product Weight height Specs
<9.1 kg 0.76 m
9.2~18.2 kg 0.66 m
18.3~27.2 Kg 0.61 m
27.3~45.4 Kg 0.46 m
8.2.1 Drop Test Sequence
Drop Order Drop point Drop Times
1 Right Front Bottom Corner 1
2 Right Bottom Edge 1
3 Right Front Edge 1
4 Front Bottom Edge 1
5 Bottom Side 1
6 Top Side 1
7 Front Side 1
8 Back Side 1
9 Left Side 1
10 Right Side 1
36
Page 37
8.3 Dimension Size and Weight
Dimension size 433 (W) x 447 (H) x 235 (D)
Net Weight 6.5Kg
Gross Weight 9 Kg
8.4 Gap Spec.
8.4.1 The step between front bezel and back cover shall be within specification.
Back Cover & Bezel Gap
0.8 mm ≤ A ≤ 1.2 mm
Back Cover & Bezel Alignment
0 mm ≤ D ≤ 0.8 mm
Back Cover & Cable Cover Gap
0.8 mm ≤ B ≤ 1.2 mm
37
Page 38
Back Cover & Cable Cover Gap
0.8 mm ≤ B ≤ 1.2 mm
Base Cover & Neck Cover Gap
0.8 mm ≤ C ≤ 1.2 mm
38
Page 39
8.4.2 LCD Horizontally
The angle between front bezel and LCD unit in bottom side should not large than 1.0mm.
The distance of the LCD display unit from left side to right should not large than
∣
E - F∣<=4.0mm.
8.5 Tilt Base Rotation
Tilt up 25 ± 1°/ down 5 ±1°
8.6 Swivel Base Rotation
Swivel Right 45 ±1° / Left 45 ±1°
39
Page 40
8.7 Plastic Material
Front Bezel ABS 94HB, 94V-0
Back Cover ABS 94HB, 94V-0
The Others ABS 94HB
TCO’ 99(Optional)
Front Bezel PC + ABS 94 - V0
BACK COVER PC + ABS 94 – V0
The others ABS 94 HB
8.8 GAP Spec.
Gap between panel with bezel is 0 mm < gap < 1.5 mm
9. Power Line Transient Test (IEC 61000-4-4 Fast
Transients/Burst)
TEST CONDITIONS & PROCEDURE: (Follow IEC 61000-4-4)
Test Condition :
The condition is base on operating with 50Ω load.
9.1 Peak Voltage:
2 KV (applies the Level 3 typical Industrial Environment” of IEC
61000-4-4)
9.2 Polarity : + / -
9.3 Repetition Frequency of the impulse : 5 KHz.
40
Page 41
9.4 Rise-Time : 5ns
9.5 Impulse Duration: 50 nS
±±±±
30%
±±±±
30%
9.6 Relation to Power Supply: Asynchronous
±±±±
9.7 Burst Duration: 15 ms
9.8 Burst Period: 300 ms
20%
±±±±
20%
9.9 Climatic Conditions:
- Ambient Temperature: 15°C to 35°C
- Relative Humidity: 45% to 75%
- Atmospheric Pressure: 86 kPa to 106 kPa
9.10 Test Procedure:
The monitor Display set high-resolution mode, AC input use AC 240V.
Note :
9.10.1
IEC 61000-4-4 defines that power supply, I/O line, and control line all shall be performed
the transient test, but the I/O line and control line is applied with only half of peak voltage
(1 KV).
9.10.2
For the comparison of wave-shape generated by different generator, so the test must uses
a scope with at least 400 MHz bandwidth, and coupled to 50 Ω to monitor the rise-time,
impulse, duration, and repetition rate of the impulses within one burst.
41
Page 42
WAVESHAPE
42
Page 43
10. Power Line Surge Test (IEC 61000-4-5 Surge)
10.1 Climatic Condition
The climatic conditions shall be within the following ranges:
10.1.1 Ambient Temperature: 15
10.1.2 Relative Humidity: 10% to 75%
10.1.3 Atmospheric Pressure 86kPa(860 mbar)to 106kPa (1060mbar)
Note: The temperature and relative humidity should be recorded in the test report.
°°°°
C to 35
°°°°
C
10.2 Test Conditions:
10.2.1 Wave-shape of the current surge: (refer to IEC 61000-4-5)
Open circuit voltage: (1.2 / 50 µs)
Short circuit current: (8 / 20 µs)
10.2.2 Polarity: positive / negative
10.2.3 Phase shifting:in a range between 0º to 270º versus the AC line phase angle
10.2.4 Repetition rate:at least 1 per minute
10.2.5 Number of tests: at least 5 positive and 5 negative at the selected points.
10.3
The surge will be applied between lines and between lines and ground.
10.4
If not otherwise specified, the surge to power supply circuits shall be applied synchronized
to the voltage phase at the zero crossing and the peak value of the AC voltage wave.
(Positive and negative)
10.5
The surge voltage for test is from 1 KV and increases 1 kV for each step.
10.6
The recommended severity levels for the surge voltage test is 2.0 KV, and without any
degradation or loss of function that is not recoverable due to damage of component or
software allowed.
10.7 Display set high-resolution mode, AC input use AC 240V.
43
Page 44
11. ENVIROMENT REQUIREMENT
11.1 Operating
Temperature 5°C ~ 40°C
Relative Humidity 20% to 80%
Altitude Sea level to 8000ft
11.2 Storage or Shipment
Temperature -20°C ~ +60°C
Relative Humidity 5% to 85%
Altitude Sea level to 40,000ft
11.2.1 TEST PROCEDURE:
• Put in temperature chamber under 60°C Time:24 hours
• Back to room temperature Time: 4 hours
• Put in temperature chamber under -20°C Time:24 hours
• Back to room temperature Time:4 hours
• The process repeat 2 times.
44
Page 45
12. REGULATION COMPLIANCE
12.1 This product comply to the most current revisions of following regulations:
UL/CUL
{UL 1950/ CSA C22.2 NO950}
EN 60950/CB Scheme Safety of Information Technology Equipment including Electrical
MPR 1990:8 Test methods for visual display units.
MPR 1990:10 User handbook for evaluation visual display units.
ISO 9241-3: Ergonomic requirements for office work with visual display terminals
ISO 9241-7: Ergonomic requirements for office work with visual display terminals
ISO 9241-8: Ergonomic requirements for office work with visual display terminals
NUTEK/EPA Requirements of power saving according to NUTEK Spec.
TCO 1999 (option) Requirements for Environmental Labeling of Personal Computers.
TUV/GS Safety regulation for displays work places in the office sector.
FCC 47 CFR, Chapter 1,
Subchapter A, Part 15, Subpart B
Standard for Safety of Information Technology Equipment including
Electrical Business Equipment
Business Equipment
(VDTs)-Visual display requirements.
(VDTs)-Requirements for display with reflections.
(VDTs)-Requirements for displayed colours.
803299/94/96, EPA Energy star.
Test methods for Ergonomic, Emission, Energy Efficiency, safety.
A digital device that is marketed for use in a residential environment
not withstanding use in commercial, business and industrial
environments.
CISPR 22 Limits and methods of measurements of radio interference
characteristics of information technology equipment.
CE LVD Directive (73/23/EEC) Safety: EN60950
CE EMC Directive (89/336/EEC)
IEC 61000-4
VCCI (option) Specification for limits and methods of measurement of radio
BSMI (option)
EMI: EN55022 class B
Harmonics: EN61000-3-2
Voltage Fluctuation/Flicker: EN61000-3-3
Immunity: EN55024
IEC 61000-4-2 Electrostatic Discharge
IEC 61000-4-3 Radiated Electromagnetic Field
IEC 61000-4-4 Fast Transients/Burst
IEC 61000-4-5 Surge
IEC 61000-4-6 Conducted Disturbance, Induced by Radio
Frequency Fields
IEC 61000-4-8 Power Frequency Magnetic Field
IEC 61000-4-11 Voltage DIP/Interruption
interference characteristics of information technology equipment.
Class B conformity verification report from the VCCI
CNS 13438, Class B
45
Page 46
12.2 Electrostatics Discharge (ESD)
E.S.D Test
This test follow the IEC 61000-4-2
Discharge Voltage Level :
Criteria Contact Discharge (KV) Air Discharge(KV)
Class C ±4 ±4
Class B ±6 ±8
Class A ±8 ±15
Class A : Temporary degradation or loss of function or performance which requires
operator Intervention or system reset.
Class B : Temporary degradation or loss of function or performance which is self-
recoverable
Class C : Normal performance within the specification limits
Discharge times: 20 times for each discharge point, time interval 1 second.
In the case of acceptance tests, the test program and the interpretation of the test results are
subject to
agreement between manufacturer and user.
The test documentation shall include the test conditions and the test results.
46
Page 47
Ambient temperature : 15°C to 35°C
Relative humidity : 30% to 60%
13. QUALITY AND RELIABILITY
13.1 Quality Assurance
Unless otherwise specified in this specification or the applicable purchase order, the supplier shall
be responsible for maintaining a statistical process program or performing inspections that are
sufficient to assure that the parts supplied meet the requirements specified herein.
13.2 Reliability
The product shall have a designed MTBF of greater than 20,000 hours during its useful life.
47
Page 48
APPENDIX A: PARTS LISTS
48
Page 49
A. FRU Board
A-1 PCBA Inverter board
A-2 454A7830001 –PCBA Key Board (VT-901)
A-3 455A7830001 –PCBA Audio& D/D Board (VM-902)
49
Page 50
A-4 461A7830011–Firmware Ctrl Board (VL-901)
50
Page 51
A. FRU BOM LIST
Product Line: Monitor System
Product Family:
System Model:ABO_AL922(ET.92202.00X),X=1,4,5,9.
LEVEL Acer F/G P/ N Compal F/G P/N CATEGORY PARTNAME DESCRIPTION
1 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 BOARDS
1 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 BOARDS KEY BOARD PCBA KEY 454A7930001 U 4WKS REQUIRED SYSTEM 3.02 30 LOCAL SCRAP NO NO
1 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 BOARDS
1 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 BOARDS PCBA AUDIO BOARD PCBA AUDIO 455A7830021 U 4WKS REQUIRED SYSTEM 18.36 30 LOCAL SCRAP NO NO
1 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 CABLE LCD NET WIR SET NET WIR SET NA200800200 U 4WKS REQUIRED 0.08 50 LOCAL SCRAP NO NO
ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 CABLE KEY BOARD CABLE H-CON SET DC020200450 U 4WKS REQUIRED 1.04 50 LOCAL SCRAP NO NO
1 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 CABLE CABLE CB ASY DC190013720 U 4WKS REQUIRED 0.76 50 LOCAL SCRAP NO NO
1 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 CABLE SINGLE CABLE CB ASY DC190019270 U 4WKS REQUIRED 8.08 50 LOCAL SCRAP NO NO
1 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 CABLE SINGLE CABLE CB ASY DC190020440 U 4WKS REQUIRED 4.35 50 LOCAL SCRAP NO NO
INVERTER/POWER
BOARD PCBA INVERTER&POWER PK07V000100 U 4WKS REQUIRED SYSTEM 16.56 30 LOCAL SCRAP NO NO
FIRMWARE CONTROL
BOARD(M/B) FIRMWARE CTRL (M/B) 461A7830011 U 4WKS REQUIRED SYSTEM 25.78 30 LOCAL REPAIR/LOCAL SCRAP NO NO
ACER
PART
NO.
Compal PART
NO.
Common/
Unique TAT
2 months
Rolling
Forecast
COMMENT
FOR
REFERNCE/MB
LOCATION
Unit Price
(US)
Action
Code
SUGGEST
MINIMAL
ORDER
Q'TY
DEFECT PARTS RETURN/SCRAP/
VENDOR S/N COLLECT
LOCAL
BUY
(YES/NO)
INDIVIDUAL
PACK(YES/NO)
1 ET.92202.001/1009 LAM999F1002/1009 CABLE POWER CORD POWER CORD( EU) GA020000100 U 4WKS REQUIRED 1.60 50 LOCAL SCRAP NO NO
1 ET.92202.1005 LAM999F1005 CABLE POWER CORD POWER CORD( AU) GA060000510 U 4WKS REQUIRED 2.28 50 LOCAL SCRAP NO NO
1 ET.92202.1005 LAM999F1009 CABLE POWER CORD POWER CORD (EU) GA040080300 U 4WKS REQUIRED 3.53 50 LOCAL SCRAP NO NO
1 ET.92202.1009 LAM999F1009 CABLE POWER CORD POWER CORD (EU) GA070030300 U 4WKS REQUIRED 3.06 50 LOCAL SCRAP NO NO
1 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009
1 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009
1 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009
1 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009
1 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009
1 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009
1 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 LCD FLC48SXC8V 19" FUJ FLC48SXC8V 19" FUJ AC600022700 C 4WKS REQUIRED 558.60 20 RETURN NO NO
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT CRTSTAL 14.31818MHZ HC-49/ BD114P3M020 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT FPC CM999 VS-901 REV1 DA3M999V010 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT SM IC EE 128X8 SOP-8 24L SA024210300 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT LED LYG2093 YEL/GRN 3D BC5G2093000 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT IC SI-8051S LF1102 AB080510100 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT VR RES 3/100W RK10F12U013 CF150021300 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT SM IC SN74LVC14 SOP-14 I SA074140400 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT S IC EEPROM PLCC-32 SST SA390100000 C 2WKS
CASE/COVER/BRACKET
ASSEMBLY LCD COVER ASSY LCD COVER FACM991B200 U 4WKS REQUIRED 4.56 50 LOCAL SCRAP NO NO
CASE/COVER/BRACKET
ASSEMBLY
CASE/COVER/BRACKET
ASSEMBLY CHASSIS CHASSIS ECCM9915100 U 4WKS REQUIRED 8.35 50 LOCAL SCRAP NO NO
CASE/COVER/BRACKET
ASSEMBLY EMI COVER EMI COVER EECM9916100 U 4WKS REQUIRED 1.86 50 LOCAL SCRAP NO NO
CASE/COVER/BRACKET
ASSEMBLY STAND NECK(BASE) STAND NECK(BASE) ECCM9924000 U 4WKS REQUIRED 2.91 50 LOCAL SCRAP NO NO
CASE/COVER/BRACKET
ASSEMBLY HINGE HINGE ECCM9933000 U 4WKS REQUIRED 4.61 50 LOCAL SCRAP NO NO
LCD BEZEL A'SSY
(ACER) LCD BEZEL A'SSY (ACER) FAAM991A200 U 4WKS REQUIRED 8.53 50 LOCAL SCRAP NO NO
X1
FPC
U1
LED
U801
VR
U3
U6
0.44 20 LOCAL SCRAP NO NO
8.85 20 LOCAL SCRAP NO NO
1.04 50 LOCAL SCRAP NO NO
0.25 20 LOCAL SCRAP NO NO
2.10 50 LOCAL SCRAP NO NO
0.45 20 LOCAL SCRAP NO NO
0.45 50 LOCAL SCRAP NO NO
2.45 50 LOCAL SCRAP NO NO
51
Page 52
U9
U11
U12
Q1
U7
J6
ZD801
J1
U1
U4
U5
U8
13.05 20 LOCAL SCRAP NO NO
0.68 50 LOCAL SCRAP NO NO
0.94 50 LOCAL SCRAP NO NO
3.75 50 LOCAL SCRAP NO NO
0.84 20 LOCAL SCRAP NO NO
0.56 50 LOCAL SCRAP NO NO
0.07 20 LOCAL SCRAP NO NO
0.60 20 LOCAL SCRAP NO NO
0.48 20 LOCAL SCRAP NO NO
0.05 20 LOCAL SCRAP NO NO
1.60 20 LOCAL SCRAP NO NO
1.96 50 LOCAL SCRAP NO NO
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT S IC GM5120 PQFP-208 SA051200100 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT SM IC EE 16K SO-8 C SA024160008 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT SM TRANSISTOR SI9435 (SO-8) SBX94350109 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT S IC THC63LVDM83A TSSOP SA063830000 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT S IC APL1085-33CE TO252 SA010850500 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT S IC APL1117-25 SOT-223 SA011170200 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT SM TRANSISTOR MMBT3906 (SOT-23) SB7390601T6 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT S IC MCP809-2.93 SIT-23 SA008090600 C 2WKS
3 ET.92202.001/004/005/009 LAM 999F1002/1004/1005/1009 PCB COMPONENT WAFER CONN. E&T 96113-1013 10P DC03E000500 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT ZENER DIODE HZ6B-2 BC40HZ6B2T7 C 2WKS
3 ET.92202.001/004/005/009 LAM 999F1002/1004/1005/1009 PCB COMPONENT WAFER CONN. E&T 96113-1113 11P DC03E001000 C 2WKS
3 ET.92202.001/004/005/009 LAM999F1002/1004/1005/1009 PCB COMPONENT IC TDA1517 SIL-9 AUDI AB015170002 C 2WKS
Spare Parts Level 1: Stands for FRU( Field Replaceable Unit) and CRU( Customer Replaceable Unit) which are used for first tier system service use and in LOW
stock level and RTV items.
Spare Parts Level 2: Stands for subassemblies of FRU and consumed parts which should be in HIGH stock level and scrap items.
Spare parts Level 3: Mainboard Components
Option items: "MFG" is responsible for 1st year support after product phase-out. CSD only provides FRU(plain package) instead of whole option item(marketing
package) accordingl y.
* RETURN/SCRAP" : the choice made for high dollar valued item to be returned for repair and low dollar valued item to be scrapped locally.
* VENDOR S/N COLLECT : which the item may not be returned local but with vendor S/N collect for pass-through warranty claim. The details please do follow
AIH/RTV process procedures.
52
Page 53
APPENDIX B: DISPLAY UNIT ASSEMBLY
53
Page 54
A
B
C
D
E
For Standaard
202
002
8 7 6 5 4 3 2 1
013
004
001
006
014
201
008
003
302
303
301
304
305
007
345678
A3
SHEET
2
DRAWING NO.SIZE REV
FOR REV RECORD SEE SHEET 1
12
LAM999
0A
A
B
C
D
E
Page 55
!!M-id!ART"!
MANUAL!ser vice!AB
==================== ========= ========== ====== ========== ========= ========== ========== ========= ======= ========= ========== ========= ====
QUANTITY REQUIRED DWG.NO. LAM999 REV. 0A
C NO. PART NO. DESCRIPTION SPECIFICATION ------------- ----- -------------------- --------- ---------
F1
001 REMARKS
- ---- ----------- -------------------- ---- ------------------------ ------ --- --- --- --- --- ----- ----- ----- ----- ----- ----# LAM999F1001 LAM999F ABO-USA UR+TCO99 110V MSV16 19"FUJITSU
1 DC190020440 CB ASY CM999 SIG/2CORE 1.8M BLK90DSUB 1 - - - - 301
2 GA050000400 POWER CORD SET SP305X1.8MXIS 14 SVT BLK 1 - - - - 302
3PK10V000000ACADAP LAELAD6019AB512V/5ABLK 1----303
4 DC190019270 CB ASY CM999 20276/CORE 1.8M BLK90DVI 1 - - - - 304
5 DC190013720 CABLE ASSY CM35H AUDIO IN 3P BLK-GRN 1 - - - - 305
658290330001DISABO LAM999FTCO9919"FUJ1280X10241----351
7 68006530001 PACKING ABO-USA LAM999F UR+TCO99 MSV16 1----352
8 X66AI830001 MEC PACKING ABO LAM999F TCO99 1 - - - - 353
End of Report
==================== ========= ========== ====== ========== ========= ========== ========== ========= ======= ========= ========== ========= ====
QUANTITY REQUIRED DWG.NO. 680065 REV. 0A
C NO. PART NO. DESCRIPTION SPECIFICATION ------------- ----- -------------------- --------- ---------
30
001 REMARKS
- ---- ----------- -------------------- ---- ------------------------ ------ --- --- --- --- --- ----- ----- ----- ----- ----- ----# 68006530001 PACKING ABO-USA LAM999F UR+TCO99 MSV16
1 EJ4AM999000 RATING NP N-AM999-ABO UFGC 99 W/W 1 - - - - 001
2 HB4AM999000 CARTON C-AM999-ABO W/W CHN 1 - - - - 002
3 HDABOAM9900 USER'S MANUAL U-AM999-ABO EFGSIDPJC/CS 99 1 - - - - 003
4 HF6TCO99000 TCO99 (NOTICE SHEET) FOR TCO99 1 - - - - 004
5HGTCO990000TCO99LABEL TCO99FORBEZEL/MANUAL 1----006
6HGTCO990100TCO99LABEL TCO99FORCARTON 1----007
7 HK3CM870100 PE BAG CM870-K001 FOR MAC LCDMONITOR 1 - - - - 008
8HF6VS558110WARRANTYCARD F-VS558-ABOUSALCD/CRTR1 1----013
9EJ1AM999000FRONTPLATE N-AM999-ABOFORBEZEL 1----014
End of Report
55
Page 56
==================== ========= ========== ====== ========== ========= ========== ========== ========= ======= ========= ========== ========= ====
QUANTITY REQUIRED DWG.NO. X66AI8 REV. 0A
C NO. PART NO. DESCRIPTION SPECIFICATION ------------- ----- -------------------- --------- ---------
30
001 REMARKS
- ---- ----------- -------------------- ---- ------------------------ ------ --- --- --- --- --- ----- ----- ----- ----- ----- ----# X66AI830001 MEC PACKING ABO LAM999F TCO99
1FJCM9917000EPSFOAM-L CM9917 1----201
2FJCM9918000EPSFOAM-R CM9918 1----202
End of Report
56
Page 57
8
E
7 6 5 4 3 2
011
2PCS
019
2PCS
016
4PCS
018
006
5PCS
014
1
FOR REV RECORD SEE SHEET 1
013
019
2PCS
2PCS
E
D
VM-902
352
VL-901
305
C
015
2PCS
B
022
2PCS
2PCS
020
001
301
F
G
353
303
F
G
304
302
306
010
014
4PCS
018
2PCS
D
C
B
015
A
020
2PCS
309
310
8
7 6 5 4 3 2
022
2PCS
351
VT-901
009
2PCS
A
SIZE
SHEET
A3
2
582903 0A
REVDRAWING NO.
1
Page 58
A
B
C
D
E
7 68
007
002
021
013
3PCS
005
2PCS
5PCS
004
018
013
7 68
008
003
2345
6PCS
012
SIZE
A3
SHEET
3
DRAWING NO.
1
582903
5PCS
017
FOR REV RECORD SEE SHEET 1
12345
REV
0A
A
B
C
D
E
Page 59
!!M-id!ART"!
MANUAL!ser vice!AB
==================== ========= ========== ====== ========== ========= ========== ========== ========= ======= ========= ========== ========= ====
C NO. PART NO. DESCRIPTION SPECIFICATION ------------- ----- -------------------- --------- ---------
- ---- ----------- -------------------- ---- ------------------------ ------ --- --- --- --- --- ----- ----- ----- ----- ----- ----# 58290330001 DIS ABO LAM999F TCO99 19"FUJ 1280X1024
1 AC600022700 LCD MODU FLC48SXC8V 19" FUJITSU 1 - - - - 301
2 DA3M999V010 FPC CM999 VS-901 REV1 1 - - - - 302
3 DC020200420 H-CON SET CM999 CTRL-DC 7P 1 - - - - 303
4 DC020200430 H-CON SET CM999 DC-INV 12P 1 - - - - 304
5DC020200440H-CONSET AM999KEY-AMP11PSHE1LD 1----305
6 DC020200450 H-CON SET AM999 KEY-CTRL 10P 1 - - - - 306
7 454A7930001 PCBA KEY/B VT-901 LAM999F 1 - - - - 351
8455A7830021PCBAAUDIO&D/DBD. VM-902LAM999F 1----352
9 461A7830011 FIRMWARE CTRL/B VL-901 LAM999F ABO 1 - - - - 353
10X66AI930001MECPARTSABO LAM999FTCO99MSV16/MBK17 1----354
!!M-id!ART"!
MANUAL!ser vice!AB
QUANTITY REQUIRED DWG.NO. 582903 REV. 0A
30
001 REMARKS
End of Report
59
Page 60
==================== ========= ========== ====== ========== ========= ========== ========== ========= ======= ========= ========== ========= ====
QUANTITY REQUIRED DWG.NO. X66AI9 REV. 0A
C NO. PART NO. DESCRIPTION SPECIFICATION ------------- ----- -------------------- --------- ---------
30
001 REMARKS
- ---- ----------- -------------------- ---- ------------------------ ------ --- --- --- --- --- ----- ----- ----- ----- ----- ----# X66AI930001 MEC PARTS ABO LAM999F TCO99 MSV16/MBK17
1 ECCM9915100 CHASSIS CM9915 (FOR POWER SW) 1 - - - - 001
2ECCM9922000NECKBRACKET CM9922 1----002
3ECCM9924000BASEBRACKET CM9924 1----003
4ECCM9933000HINGEASSY CM9933 1----004
5ECCM9934000SWIVELHINGE CM9934 1----005
6 EECM9916100 EMI COVER CM9916 1 - - - - 006
7 FACM9913200 NECK COVER CM9913 ABS94HB MBK17 1 - - - - 007
8 FACM9914400 BASE COVER CM9914 ABS94HB MSV15 1 - - - - 008
9 FAAM991A200 BEZEL ASSY AM991A ABS94HB MSV15 ACER 1 - - - - 009
10 FACM991B200 BACK COVER ASSY CM9991B ABS94HB MBK17(AUDIO) 1----010
11 FBCM9921200 CABLE COVER CM9921 ABS94HB MBK17 1----011
12 FHST3545100 RUBBER FOOT ST3545 6 ----012012012012012012
13 MAA70002204 SCREW M4X0.7+10 P-NI DIM 8.0 10----013013013013013013
013 013 013 013
14 MAA70003100 SCREW M3X0.5+4C -NI (NL) 9----014014014014014014
014 014 014
15 MAA70007209 SCREW M3X0.5+10 P-NI & WASHER DIM 6 4----015015015015
16 MAAA0019300 SCREW SPECIAL 4#-40UNCX1 2.7 WASHER D=5.0 4----016016016016
17 MAB10003400 SCREW TPP-4+10F -MC 5 ----017017017017017
18 MAB20009200 SCREW TPB-4+12P -NI 6 ----018018018018018018
19 MAB20076200 TAPING SCREW TPP-4.0+16P-NI 4----019019019019
20 MAB80007400 SCREW TPP2X3+12 B-MC 4 ----020020020020
21DC150V00000CORE KCK5BT36X6X23-G 1----021
22 MAB7T002419 SCREW TPB-4+10C -MC 4 ----022022022022
End of Report
60
Page 61
APPENDIX C: P.C.B.A ASSEMBLY
6#
Page 62
A
4 4
B
C
D
E
J2
4 5
J1
11
AudioBoard
connector
3 3
MainBoard
connector
2 2
LOUT
10
ROUT
9
L_EAR
8
R_EAR
7
LIN_2
6
RIN_2
5
RIN_1
4
LIN_1
3
2
MUTE
1
E&T_96113_1113
J5
MUTE
1
LED_Y
2
LED_G
3
GND
4
KEY_UP
5
KEY_DOWN
6
KEY_R
7
KEY_L
8
KEY_PWR
9
GND
10
E&T_96113_1013
S1
PT-002-B2
S2
PT-002-B2
2
2'
S3
PT-002-B2
3'
S4
PT-002-B2
1,1'
3
VR1
50K
S5
PT-002-B2
LI1 LO
2
LI2
7
RI1
3
RI2
SCJ-0348-C
321
D1
LYG2093 YEL/GRN
6
NC
8
RO
1
GND
VR
3 3'2'2 1
1'
J3
1
2
ACES_87502_0200
STRAIGHT/2.5
J4
1
2
ACES_87502_0200
STRAIGHT/2.5
1 1
Title
SCHEMATIC, KEY/B VT-901 LAM999
Size Document Number Rev
A3
404A79
A
B
C
D
Date: Sheet
22Thursday, July 18, 2002
E
1A
of
Page 63
!!M-id!ART"!
MANUAL!ser vice!AB
==================== ========= ========== ====== ========== ========= ========== ========== ========= ======= ========= ========== ========= ====
QUANTITY REQUIRED DWG.NO. 454A79 REV. 1A
C NO. PART NO. DESCRIPTION SPECIFICATION ------------- ----- -------------------- --------- ---------
30
001 REMARKS
- ---- ----------- -------------------- ---- ------------------------ ------ --- --- --- --- --- ----- ----- ----- ----- ----- ----# 454A7930001 PCBA KEY/B VT-901 LAM999F 1A
1 BC5G2093000 LED LYG2093 YEL/GRN 3D 3P 1 - - - - D1
2 CF150021100 VR RES 1/100W 50KB EVUTV6B28C54 1 - - - - VR1
3 DA1M999V110 PCB CM999 VT-901 REV1 1 - - - - ZZZ
4 DC030040000 WAFER CONN ACES 87502-0200 2P P2.25 2 - - - - J3 J4
5 DC03E000500 WAFER CONN. E&T 96113-1013 10P P1.25 1 - - - - J6
6 DC03E001000 WAFER CONN. E&T 96113-1113 11P P1.25 1 - - - - J1
7DC230201307CONNECTOR SCSCJ-0348-C3.65D 1----J2
8 DE611000607 SWITCH PT-002-B2 5 - - - - S1 S2 S3 S4 S5
9XX0900T2119JUMPERWIRE D=0.6MMP5.0 1----W3
10 XX0900T2135 JUMPER WIRE D=0.6MM P10 2----W1 W2
End of Report
63
Page 64
5
4
3
2
1
LVDS_IF
ER[0..7]
EG[0..7]
EB[0..7]
OR[0..7]
OG[0..7]
OB[0..7]
D D
DVS
DHS
DEN
DCLK
LVDS_EN
LCDON
LVDS_EN
Sheet 3
RED+
RED-
GREEN+
GREEN-
BLUE+
C C
BLUE-
RXC+
RXCRX2+
RX2-
RX1+
RX1-
RX0+
RX0-
VS
DDC_SCL
DDC_SDA
HCLK
HFSn
SCL
SDA
B B
PCDETECTA
RED+
REDGREEN+
GREENBLUE+
BLUE-
RXC+
RXCRX2+
RX2RX1+
RX1RX0+
RX0-
HS
HS
VS
DDC_SCL
DDC_SDA
HCLK
HFSn
SCL
SDA
PCDETECTD
gm5115
RED+
REDGREEN+
GREEN-
BLUE+
BLUE-
RXC+
RXC-
RX2+
RX2RX1+
RX1-
RX0+
RX0HSYNC
VSYNC
DDC_SCL
DDC_SDA
HCLK
HFSn
SCL AUDIO_ON
SDA
PCDETECTA
PCDETECTD
LVDS_EN
KEY DOWN
KEY RIGHT
KEY LEFT
KEY ONOFF
BRI_ADJ
ER[0..7]
EG[0..7]
EB[0..7]
OR[0..7]
OG[0..7]
OB[0..7]
DHS
DEN
DCLK
LED_Y
LED_G
KEY UP
PPWR
PBIAS
DVS
ER[0..7]
EG[0..7]
EB[0..7]
OR[0..7]
OG[0..7]
OB[0..7]
DVS
DHS
DEN
DCLK
GPIO8/IRQINn
GPIO21/IRQn
GPIO7
GPIO6
GPIO3/TIMER1
GPIO2/PWM2
GPIO1/PWM1
LCDON
BLKON
GPIO0/PWM0
6. LVDS_IF
Display
ER[0..7]
EG[0..7]
EB[0..7]
OR[0..7]
OG[0..7]
OB[0..7]
DVS
DHS
DEN
DCLK
AUDIO_ON
LED_Y
LED_G
KEY DOWN
KEY RIGHT
KEY UP
KEY LEFT
KEY ONOFF
PPWR
Power
PBIAS
BRI_ADJ
7. Power
3. Input Connectors
A A
4. gm5115
5. Display
Title
CTRL/B VL-901,VGA INPUT
Size Document Number Rev
B
401A78
5
4
3
2
Date: Sheet
27Thursday, July 04, 2002
1
of
1B
Page 65
5
CN1
Shell
1
RX2-
2
RX2+
3
GND
4
RX4-
5
RX4+
6
SCL
7
SDA
8
VS
9
RX1-
10
RX1+
11
GND
12
RX3-
D D
13
RX3+
14
5V
15
GND
16
HP
17
RX0-
18
RX0+
19
GND
20
RX5-
21
RX5+
22
GND
23
RXC+
24
RXC-
C1
RED
C2
GRN
C3
BLU
C4
HS
C5
GND
Shell
DVI-D
DDC_5V
C C
D3 EC10QS04
D4 EC10QS04
D5 EC10QS04
SCL_IN
SDA_IN
DVI_5V
L8 STC222B
STS2125
R1 10K
HOT_PLUG
GND
DVI_5V
12
VGA_5V
12
+5V
12
PCDETECTD
4
R5 100
R6 100
3
2
RX2- SHT-4
RX2+ SHT-4
RX1- SHT-4
RX1+ SHT-4
RX0- SHT-4
RX0+ SHT-4
RXC+ SHT-4
RXC- SHT-4
1
DDC_5V
R2
47K
D1
5.6V
1 3
1 3
GND
C1
R3
0.1uF
47K
GND
D2
5.6V
U1
1
NC
2
NC
VCLK
3
NC
4
GND
24LC21A
GND
R4
47K
8
VCC
7
6
SCL
5
SDA
DDC_SCL SHT-4
DDC_SDA SHT-4
DDC_5V
C2
R8
R7
1
2
3
4
U2
NC
NC
NC
GND
24LC21A
VCLK
0.1uF
47K
GND
8
VCC
7
6
SCL
5
SDA
B B
GND
R9
47K
47K
VGA_SDA
VGA_SCL
D6
D7
5.6V
5.6V
1 3
1 3
HCLK SHT-4
HFSn SHT-4
R12 100
R15 100
CN2
11
12
13
14
15
VGA
GND
Pins 6/7/8 are R/ G/B
return lines resp.
S1S2
GND
Vsync
3.3V_DVDD
A A
NC/ZD1 DALC208SC6
VGA_BLU VGA_GRN
1
6
52
PCDETECTA
3
VGA_RED
4
Hsync
VGA_5V
C101
0.1uF
GND
PCDETECTA
VGA_RED
VGA_GRN
VGA_BLU
PCDETECTA
R18
75
R19
75
1
6
2
7
3
8
4
9
5
10
R10 20 1%
R11 56.2 1%
R13 20 1%
R14 56.2 1%
R16 20 1%
R17 56.2 1%
R20
75
GND
R21 100
R22 100
R23
510
D8
5.6V
1 3
C9
220pF
D9
5.6V
1 3
C10
220pF
C3 0.01uF
C4 0.01uF
C5 0.01uF
C6 0.01uF
C7 0.01uF
C8 0.01uF
3.3V_DVDD
C120
0.1uF
GND
SN74LVC14APWR
14
U3F
13 12
7
SN74LVC14APWR
14
U3A
1 2
7
SN74LVC14APWR
14
U3E
11 10
7
SN74LVC14APWR
14
U3B
3 4
7
RED+ SHT-4
RED- SHT-4
GREEN+ SHT-4
GREEN- SHT-4
BLUE+ SHT-4
BLUE- SHT-4
VS SHT-4
IN
HS SHT-4
GND
GND
Title
CTRL/B VL-901,VGA INPUT
Size Document Number Rev
C
401A78
5
4
3
2
Date: Sheet
1
37Thursday, July 04, 2002
1B
of
Page 66
5
C15
C11
C12
0.1uF
0.1uF
C24
22uF
6.3V
GND
C46
22uF
6.3V
GND
U5
VCCA0
A1A2WP
SCL
SDA
GND
AT24C16-10SC-1.8
GND
GND
81
7
6
5
Reset
Circuit
5
C25
0.1uF
C37
0.1uF
C47
0.1uF
GND
C26
0.1uF
C38
0.1uF
C48
100pF
R24
10K
GND
U7
VCC
Reset
GND
MCP809-300
BAV99L SIZE
RMADDR15
RMADDR14
RMADDR13
RMADDR12
RMADDR11
RMADDR10
RMADDR9
RMADDR8
RMADDR7
RMADDR6
RMADDR5
RMADDR4
RMADDR3
RMADDR2
RMADDR1
RMADDR0
+3.3V
D D
C C
B B
A A
L1
BLM21P300S
+2.5V 2.5V_AVDD
L3
BLM21P300S
3.3V_DVDD
C51
0.1uF
2
3
4
GND
C13
0.1uF
C27
0.1uF
C39
0.1uF
R25
10K
SCL
RMADDR[0..15]
R30 NC/10K
R31 10K
R32 NC/10K
R33 NC/10K
R34 NC/10K
R35 NC/10K
R36 10K
R37 10K
R40 NC/10K
R41 NC/10K
R42 NC/10K
R43 NC/10K
R44 NC/10K
R45 NC/10K
R46 NC/10K
R47 NC/10K
SW1
SW PUSHBUTTON
3.3V_DVDD
3
2
1
GND
C14
0.1uF
C28
0.1uF
C40
0.1uF
0.1uF
C29
0.1uF
C41
0.1uF
RM-15
RM-14
OSC-SEL
RM-A12
RM-A11
RM-A10
OCM-START
H-PORT-EN
H-PROTO
SCLPOL
RM-A5
RM-A4
RM-A3
RM-A2
RM-A1
RM-A0
/RESET
C16
0.1uF
C30
0.1uF
C42
0.1uF
3.3V_DVDD
C17
0.1uF
C31
0.1uF
C43
0.1uF
C18
0.1uF
C32
0.1uF
C44
0.1uF
4
C19
0.1uF
2.5V_VDD
A17
A16
4
C33
0.1uF
C45
0.1uF
R29 NC/0
R38
10K
C20
0.1uF
C34
0.1uF
+5V
R39
10K
R48 10K
C21
0.1uF
C35
0.1uF
3.3V_AVDD
3.3V_DVDD
C49
22pF
C22
0.1uF
3.3V_AVDD
C36
0.1uF
X1
14.318MHz
+5V
RMADDR15
RMADDR14
RMADDR13
RMADDR12
RMADDR11
RMADDR10
RMADDR9
RMADDR8
RMADDR7
RMADDR6
RMADDR5
RMADDR4
RMADDR3
RMADDR2
RMADDR1
RMADDR0
FLASH_OEn
3.3V_AVDD
R2810K
GND
C50
22pF
R26
0R
/WR
XTAL
U6 AT49HF/F010-45JC
31
30
2
3
29
28
4
25
23
26
27
5
6
7
8
9
10
11
12
24
22
WE
NC/A17
A16
A15
A14
A13
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
A0
OE
CE
PCDETECTASHT-3
PCDETECTDSHT-3
DDC_SDASHT-3
DQ7
DQ6
DQ5
DQ4
DQ3
DQ2
DQ1
DQ0
NC
VCC
GND
32-Pin PLCC Socket
TCLK
DDC_SCLSHT-3
21
20
19
18
17
15
14
13
1
32
16
HSYNCSHT-3
VSYNCSHT-3
PPWRSHT-5
PBIASSHT-7
GREEN+SHT-3
GREEN-SHT-3
HFSnSHT-3
HCLKSHT-3
RED+SHT-3
RED-SHT-3
BLUE+SHT-3
BLUE-SHT-3
RXC+SHT-3
RXC-SHT-3
RX2+SHT-3
RX2-SHT-3
RX1+SHT-3
RX1-SHT-3
RX0+SHT-3
RX0-SHT-3
3
RMDATA7
RMDATA6
RMDATA5
RMDATA4
RMDATA3
RMDATA2
RMDATA1
RMDATA0
+5V+5V
GND
+5V
GND
3
C52
0.1uF
3.3V_DVDD
R66
10K
RMDATA[0..7]
2.5V_AVDD
R67
10K
TCLK
XTAL
A17
A16
/RESET
3.3V_DVDD
R27 1K
RMADDR15
RMADDR14
RMADDR13
RMADDR12
RMADDR11
RMADDR10
RMADDR9
RMADDR8
RMADDR7
RMADDR6
RMADDR5
RMADDR4
RMADDR3
RMADDR2
RMADDR1
RMADDR0
RMDATA7
RMDATA6
RMDATA5
RMDATA4
RMDATA3
RMDATA2
RMDATA1
RMDATA0
ROM_OEn
3.3V_AVDD
GND
LCDON
BLKON
1%
gm5115 Family
PQFP208
U4
141
AVDD_DDDS
146
AVDD_SDDS
150
AVDD_RPLL
173
AVDD_IMB
181
AVDD_RX2
187
AVDD_RX1
193
AVDD_RX0
196
AVDD_RXC
164
AVDD_BLUE
168
AVDD_GREEN
172
AVDD_RED
160
AVDD_ADC
199
VDD_RXPLL_2.5
175
AGND_IMB
178
AGND_RX2
184
AGND_RX1
190
AGND_RX0
197
AGND_RXC
198
AGND_RXPLL
157
SGND_ADC
158
AGND_ADC
161
AGND_BLUE
165
AGND_GREEN
169
AGND_RED
149
AVSS_RPLL
145
AVSS_SDDS
140
AVSS_DDDS
113
PPWR
114
PBIAS
152
TCLK
151
XTAL
206
GPIO20
207
GPIO19
208
GPIO18
1
GPIO17
205
GPIO16/HFSn
204
GPIO22/HCLK
6
DDC_SCL
7
DDC_SDA
5
RESETn
50
GPIO11/ROM_WEn
171
RED+
170
RED-
167
GREEN+
166
GREEN-
163
BLUE+
162
BLUE-
137
HSYNC
136
VSYNC
159
ADC_TEST
194
RXC+
195
RXC-
179
RX2+
180
RX2-
185
RX1+
186
RX1-
191
RX0+
192
RX0-
174
REXT
8
ROM_ADDR15
9
ROM_ADDR14
10
ROM_ADDR13
11
ROM_ADDR12
12
ROM_ADDR11
13
ROM_ADDR10
14
ROM_ADDR9
15
ROM_ADDR8
16
ROM_ADDR7
17
ROM_ADDR6
18
ROM_ADDR5
19
ROM_ADDR4
22
ROM_ADDR3
23
ROM_ADDR2
24
ROM_ADDR1
25
ROM_ADDR0
28
ROM_DATA7
29
ROM_DATA6
30
ROM_DATA5
31
ROM_DATA4
32
ROM_DATA3
33
ROM_DATA2
34
ROM_DATA1
35
ROM_DATA0
36
ROM_OEn
153
VDD2_ADC_2.5
3.3V_A
AGND
RVSS
RVSS
RVSS
3213854688298
GND
2.5V_VDD
155
176
182
188
VDD_RX2_2.5
VDD_RX1_2.5
VDD_RX0_2.5
VDD1_ADC_2.5
RVSS
RVSS
RVSS
RVSS
112
TXD
RXD
2
2688134
203
148
144
CVDD_2.5
CVDD_2.5
CVDD_2.5
CVDD_2.5
VDD_DPLL_3.3
VDD_SDDS_3.3
RVSS
RVSS
CVSS
CVSS
CVSS
CVSS
CVSS
13089133
202
135
27
NC/CN3 E&T 96113-0512
123
4
2
3.3V_DVDD
22053678197111
139
37
RVDD
RVDD
VDD_DDDS_3.3
GND1_ADC
GND2_ADC
GND_RX2
GND_RX1
156
154
177
183
189
129
RVDD
RVDD
RVDD
RVDD
RVDD
RVDD
RVDD
DCLK
PD47/OB7
PD46/OB6
PD45/OB5
PD44/OB4
PD43/OB3
PD42/OB2
PD41/OB1
PD40/OB0
PD39/OG7
PD38/OG6
PD37/OG5
PD36/OG4
PD35/OG3
PD34/OG2
PD33/OG1
PD32/OG0
PD31/OR7
PD30/OR6
PD29/OR5
PD28/OR4
PD27/OR3
PD26/OR2
PD25/OR1
PD24/OR0
PD23/EB7
PD22/EB6
PD21/EB5
PD20/EB4
PD19/EB3
PD18/EB2
PD17/EB1
PD16/EB0
PD15/EG7
PD14/EG6
PD13/EG5
PD12/EG4
PD11/EG3
PD10/EG2
PD9/EG1
PD8/EG0
PD7/ER7
PD6/ER6
PD5/ER5
PD4/ER4
PD3/ER3
PD2/ER2
PD1/ER1
PD0/ER0
TCON_OSP
TCON_OPOL
TCON_OINV
TCON_ESP
TCON_EPOL
TCON_EINV
TCON_RSP2
TCON_RSP3
TCON_RCLK
GPIO10/TCON_ROE3
GPIO9/TCON_ROE2
TCON_ROE
GPIO4/UART_D1
GPIO5/UART_D0
GPIO13/NVRAM_SCL
GPIO12/NVRAM_SDA
GPIO21/IRQINn
GPIO21/IRQn
GPIO7/TCON_TDIV
GPIO6/TCON_SHC
GPIO3/TIMER1
GPIO2/PWM2
GPIO1/PWM1
GPIO0/PWM0
CLKOUT
Int_Test
Reserved
Reserved
GND_RX0
VSS_DPLL
VSS_SDDS
VSS_DDDS
147
143
138
+3.3V
1
BLM21P300S
L2
118
R63 0
115
DEN
DVS
DHS
N/C
N/C
R65 0
117
R64 0
116
OB7
110
OB6
109
OB5
108
OB4
107
OB3
106
OB2
105
OB1
104
OB0
103
OG7
102
OG6
101
OG5
100
OG4
99
OG3
96
OG2
95
OG1
94
OG0
93
OR7
92
OR6
91
OR5
90
OR4
87
OR3
86
OR2
85
OR1
84
OR0
83
EB7
80
EB6
79
EB5
78
EB4
77
EB3
76
EB2
75
EB1
74
EB0
73
EG7
72
EG6
71
EG5
70
EG4
69
EG3
66
EG2
65
EG1
64
EG0
63
ER7
62
ER6
61
ER5
60
ER4
59
ER3
58
ER2
57
ER1
56
ER0SDA
55
119
120
121
122
123
124
125
126
127
LVDS_EN
49
48
128
RXD
44
TXD
45
GPIO13/NVRAM_SCL
52
GPIO12/NVRAM_SDA
51
GPIO8/IRQINn
39
GPIO21/IRQn
4
GPIO7
47
GPIO6
46
GPIO3/TIMER1
43
GPIO2/PWM2
42
GPIO1/PWM1
41
GPIO0/PWM0
40
201
200
142
132
131
GND
Title
CTRL/B VL-901,VGA INPUT
Size Document Number Rev
C
401A78
Date: Sheet
DCLK SHT-5,6
DEN SHT-5,6
DVS SHT-5,6
DHS SHT-5,6
OB[0..7] SHT-5,6
OG[0..7] SHT-5,6
OR[0..7] SHT-5,6
EB[0..7] SHT-5,6
EG[0..7] SHT-5,6
ER[0..7] SHT-5,6
LVDS_EN
AUDIO_ON SHT-5
SCL SHT-3
SDA SHT-3
LED_Y SHT-5
LED_G SHT-5
KEY DOWN
KEY RIGHT
KEY ONOFF SHT-5
KEY LEFT SHT-5
KEY UP SHT-5
BRI_ADJ SHT-5
1
SHT-5
SHT-5
SHT-5
1B
of
47Thursday, July 04, 2002
Page 67
5
4
3
2
1
3.3V_DVDD
D D
R51
R52
R53
470
C56
0.1uF
R54
470
R72 100
R73 100
R71 100
R74 100
R75 100
C57
0.1uF
SHT-4
SHT-4
SHT-4
KEY UP
KEY LEFT
KEY ONOFF
KEY RIGHTSHT-4
KEY DOWNSHT-4
R50
470
C53
0.1uF
470
C54
0.1uF
470
C55
0.1uF
GND
C C
+5V
3.3V_DVDD
SHT-4
SHT-4
LED_Y
R56
47K / 4.7K
E
Q1
B
C
2N3906 / NC
R58 75 / 100
3.3V_DVDD
SHT-4
LED_G
B B
R59
47K / 4.7K
E
Q2
B
C
2N3906 / NC
AUDIO_ON
NC/4.7uF/10V 0805
GND GND
C63
470pF
GND GND
R61 75 / 100
A A
5
R55 NC/820
C58
C64
470pF
C59
NC/0.1uF
KEY ONOFF
KEY DOWN
KEY RIGHT
KEY LEFT
KEY UP
GND
J1
1
2
3
4
5
6
7
8
9
10
Molex_53261-1090
Keyboard Connector
PPWRSHT-4
LCDON
680uF/16V DIP
C60
R60 10K
R57
+
10K
GND
C65
+
NC/47uF
GND
4
3
GND
U8
1
2
3
4 5
SI9435_SO8
Q3
2SC2411K
S1
D4
S2
D3
S3
D2
GD1
2
8
7
6
L4 BLM21P300S
C61
+
47uF
PANEL_VDD
PANEL_VDD
C62
18pF
GND
Title
CTRL/B VL-901,VGA INPUT
Size Document Number Rev
C
401A78
Date: Sheet
1
1B
of
57Thursday, July 04, 2002
Page 68
5
4
3
2
1
LCDONSHT-4
DHSSHT-4
DVSSHT-4
DENSHT-4
DCLKSHT-4
D D
C C
B B
ER[0..7]SHT-4
EB[0..7]SHT-4
EG[0..7]SHT-4
OR[0..7]SHT-4
OB[0..7]SHT-4
OG[0..7]SHT-4
ER[0..7]
EB[0..7]
EG[0..7]
OR[0..7]
OB[0..7]
OG[0..7]
LCDON
DHS
DVS
DEN
DCLK
DARED0
LVDS_GND
DARED1
DARED2
DARED3
DARED4
DARED5
DARED6
DARED7
DAGRN0
DAGRN1
DAGRN2
DAGRN3
DAGRN4
DAGRN5
DAGRN6
DAGRN7
DABLU0
DABLU1
DABLU2
DABLU3
DABLU4
DABLU5
DABLU6
DABLU7
DHS
DVS
DEN
DISP_CLK
R62
100
ER0
ER1
ER2
ER3
ER4
ER5
ER6
ER7
EB0
EB1
EB2
EB3
EB4
EB5
EB6
EB7
EG0
EG1
EG2
EG3
EG4
EG5
EG6
EG7
OR0
OR1
OR2
OR3
OR4
OR5
OR6
OR7
OB0
OB1
OB2
OB3
OB4
OB5
OB6
OB7
OG0
OG1
OG2
OG3
OG4
OG5
OG6
OG7
RP1 22
8
7
6
8
7
6
RP2 22
RP5 22
8
7
6
8
7
6
RP6 22
RP3 22
8
7
6
8
7
6
RP4 22
RP7 22
8
7
6
8
7
6
RP8 22
RP11 22
8
7
6
8
7
6
RP12 22
RP9
8
7
6
8
7
22
6
RP10 22
DARED0
1
DARED1
2
DARED2
3
DARED3
45
DARED4
1
DARED5
2
DARED6
3
DARED7
45
DABLU0
1
DABLU1
2
DABLU2
3
DABLU3
45
DABLU4
1
DABLU5
2
DABLU6
3
DABLU7
45
DAGRN0
1
DAGRN1
2
DAGRN2
3
DAGRN3
45
DAGRN4
1
DAGRN5
2
DAGRN6
3
DAGRN7
45
DCLK
DBRED0
1
DBRED1
2
DBRED2
3
DBRED3
45
DBRED4
1
DBRED5
2
DBRED6
3
DBRED7
45
DBBLU0
1
DBBLU1
2
DBBLU2
3
DBBLU3
45
DBBLU4
1
DBBLU5
2
DBBLU6
3
DBBLU7
45
DBGRN0
1
DBGRN1
2
DBGRN2
3
DBGRN3
45
DBGRN4
1
DBGRN5
2
DBGRN6
3
DBGRN7
45
10pF
C74
GND
DBRED0
DBRED1
DBRED2
DBRED3
DBRED4
DBRED5
DBRED6
DBRED7
DBGRN0
DBGRN1
DBGRN2
DBGRN3
DBGRN4
DBGRN5
DBGRN6
DBGRN7
DBBLU0
DBBLU1
DBBLU2
DBBLU3
DBBLU4
DBBLU5
DBBLU6
DBBLU7
DHS
DVS
DEN
DISP_CLK
U9
DS90CF383MTD
50
TXIN27
2
TXIN5
51
TXIN0
52
TXIN1
54
TXIN2
55
TXIN3
56
TXIN4
3
TXIN6
8
TXIN10
10
TXIN11
4
TXIN7
6
TXIN8
7
TXIN9
11
TXIN12
12
TXIN13
14
TXIN14
16
TXIN16
18
TXIN17
15
TXIN15
19
TXIN18
20
TXIN19
22
TXIN20
23
TXIN21
24
TXIN22
25
TXIN23
27
TXIN24
28
TXIN25
30
TXIN26
31
TXCLKIN
GND
U10
DS90CF383MTD
TSSOP56
50
TXIN27
2
TXIN5
51
TXIN0
52
TXIN1
54
TXIN2
55
TXIN3
56
TXIN4
3
TXIN6
8
TXIN10
10
TXIN11
4
TXIN7
6
TXIN8
7
TXIN9
11
TXIN12
12
TXIN13
14
TXIN14
16
TXIN16
18
TXIN17
15
TXIN15
19
TXIN18
20
TXIN19
22
TXIN20
23
TXIN21
24
TXIN22
25
TXIN23
27
TXIN24
28
TXIN25
30
TXIN26
31
TXCLKIN
1917
VVV
ODD
26
V
1917
VVV
EVEN
PWRDWN
TXOUT0-
TXOUT0+
TXOUT1-
TXOUT1+
TXOUT2-
TXOUT2+
TXOUT3-
TXOUT3+
TXCLKOUTTXCLKOUT+
LVDSVCC
LVDSGND
LVDSGND
LVDSGND
PLLVCC
PLLGND
PLLGND
26
V
C66
0.1uF
GND
GND
GND
GND
GND
C75
0.1uF
PWRDWN
TXOUT0TXOUT0+
TXOUT1TXOUT1+
TXOUT2TXOUT2+
TXOUT3-
TXOUT3+
TXCLKOUTTXCLKOUT+
LVDSVCC
LVDSGND
LVDSGND
LVDSGND
PLLVCC
PLLGND
PLLGND
GND
GND
GND
GND
GND
C67
0.1uF
32
TXO0-
48
TXO0+
47
TXO1-
46
TXO1+
45
TXO2-
42
TXO2+
41
TXO3-
38
TXO3+
37
TXOCLK-
40
TXOCLK+
39
44
C70
49
43
0.1uF
36
34
C72
35
33
0.1uF
53
29
LVDS_GND
21
13
5
GND
C76
0.1uF
32
48
47
46
45
42
41
38
37
40
39
44
49
43
36
34
35
33
53
29
21
13
5
GND
C77
0.1uF
TXE0TXE0+
TXE1TXE1+
TXE2TXE2+
TXE3TXE3+
TXECLKTXECLK+
C68
0.1uF
GND
C79
0.1uF
C81
0.1uF
LVDS_GND
GND
C78
0.1uF
C69
0.1uF
C71
0.01uF
C73
0.01uF
C80
0.01uF
C82
0.01uF
PANEL SIGNAL OUT PUT
LVDS_ENSHT-4
PANEL_VDD
Connect LVDS grounds to GND
at one single point only.
TXE0TXE0+
TXE1TXE1+
TXE2TXE2+
TXECLKTXECLK+
TXE3TXE3+
TXO0TXO0+
TXO1TXO1+
TXO2TXO2+
TXOCLKTXOCLK+
TXO3TXO3+
PANEL_VDD
LVDS_GNDGND
CN4
1
RXO0-
2
RXO0+
3
GND
4
RXO1-
5
RXO1+
6
GND
7
RXO2-
8
RXO2+
9
GND
10
RXOC-
11
RXOC+
12
GND
13
RXO3-
14
RXO3+
15
GND
16
RXE0-
17
RXE0+
18
GND
19
RXE1-
20
RXE1+
21
GND
22
RXE2-
23
RXE2+
24
GND
25
RXEC-
26
RXEC+
27
GND
28
RXE3-
29
RXE3+
30
GND
31
NC
32
PD
33
NC
34
GND
35
GND
36
VDD
37
VDD
38
VDD
39
GND
40
GND
E&T_6701-40p-0.50m
LVDS_3.3V
A A
Title
CTRL/B VL-901,VGA INPUT
Size Document Number Rev
C
401A78
5
4
3
2
Date: Sheet
1
67Thursday, July 04, 2002
1B
of
Page 69
A
J2
1
2
3
4
5
6
4 4
7
CON7
GND
C90
100uF
L6
BLM21P300S
+
C91
0.01uF
+5V
5VCC
GND
BLKON
R70 1K
C102
+
47uF
PBIAS
BRI_ADJ SHT-4
GND
3 3
B
1
ADJ/GND
+5V
4 Vout
APL1117
SOT-223
2
OUT
4 Vout
APL1085
-33CE
SOT-252
C83
+
100uF
GND
U12
APL1117-25uC
C92
+
100uF
GND GND GND GND
C97
100uF
+5V
3
IN
GND GND
C84
0.1uF
1
C
U11
APL1085-3.3CE
3
IN
2
OUT
1
GND
C87
0.1uF
GND
+2.5V
C93
0.1uF
L7 BLM21P300S
C94
+
100uF
23
VOVI
4
VO
ADJ
L5 BLM21P300S
C88
C85
+
0.01uF
100uF
GND GND GND
2.5V_VDD
C95
0.1uF
C96
+
100uF
3.3V_DVDD+3.3V
C86
0.1uF
C89
+
100uF
D
E
GND GND
U13
APL1117-3.3V
23
VOVI
4
VO
C98
+
0.1uF
ADJ
1
GND
C99
0.1uF
GND GND
C100
+
100uF
LVDS_3.3V
1
ADJ/GND
2 2
1 1
3IN2
OUT
Title
CTRL/B VL-901,POWER
Size Document Number Rev
C
401A78
A
B
C
D
Date: Sheet
E
77Thursday, July 04, 2002
1B
of
Page 70
!!M-id!ART"!
MANUAL!ser vice!AB
==================== ========= ========== ====== ========== ========= ========== ========== ========= ======= ========= ========== ========= ====
QUANTITY REQUIRED DWG.NO. 461A78 REV. 0C
C NO. PART NO. DESCRIPTION SPECIFICATION ------------- ----- -------------------- --------- ---------
30 30 88
001 011 002 REMAR KS
- ---- ----------- -------------------- ---- ------------------------ ------ --- --- --- --- --- ----- ----- ----- ----- ----- ----# 461A7830001 FIRMWARE CTRL/B VL-901 LCM999F COMPAL
# 461A7830011 FIRMWARE CTRL/B VL-901 LAM999F ABO
# 461A7888002 FIRMWARE CTRL/B VL-901 LCM999F J88
1 451A7830001 PCBA CTRL/B VL-901 LCM999F 1 - 1 - - ZZZ
2 451A7830011 PCBA CTRL/B VL-901 LAM999F - 1 - - - ZZZ
3 31A394 SYSTEM EDID,LCM999(C-E) DIGITAL REF ----U1
REV:1.3
CHECKSUM:00
4 31A425 SYSTEM EDID,LCM999(C-E) ANALOG REF - - - - U2
REV:1.3
CHECKSUM:00
5 31A436 SYSTEM EDID,LCM999(J88) ANALOG - - REF - - U2
REV:1.3
CHECKSUM:00
6 31A437 SYSTEM EDID,LCM999(J88) DIGITAL - - REF - - U1
REV:1.3
CHECKSUM:00
*7 31A441 SYSTEM EDID (DIGITAL), LAM999 (ABO) - REF - - - U1
REV:1.3
CHECKSUM:00
*8 31A442 SYSTEM EDID (ANALOG), LAM999 (ABO) - REF - - - U2
REV:1.3
CHECKSUM:00
==================== ========= ========== ====== ========== ========= ========== ========== ========= ======= ========= ========== ========= ====
QUANTITY REQUIRED DWG.NO. 451A78 REV. 1D
C NO. PART NO. DESCRIPTION SPECIFICATION ------------- ----- -------------------- --------- ---------
30 30
001 011 REMARKS
- ---- ----------- -------------------- ---- ------------------------ ------ --- --- --- --- --- ----- ----- ----- ----- ----- ----# 451A7830001 PCBA CTRL/B VL-901 LCM999F 1C
# 451A7830011 PCBA CTRL/B VL-901 LAM999F 1D
1 431A7830001 SMT CTRL/B VL-901 LCM999F 1 - - - - ZZZ
2 431A7830011 SMT CTRL/B VL-901 LAM999F - 1 - - - ZZZ
3 BD114318014 CRYSTAL 14.31818MHZ (2 PIN) (S) 1 1 - - - X1
4 CB68003M010 CAPACITOR 680U 16V M B P5 L10.5 1 1 - - - C60
5 DC03E000200 WAFER CONN. E&T 96113-1003 10P P1.25 1 1 - - - J1
6 DC03E002600 WAFER E&T 4500-07 7P P2.0 1 1 - - - J2
7DC060014010CONN. 30PFEMALE74320-4004 11---CN1
8DC060015000D-CONN 15PFEMALE1211-15 11---CN2
9 SA390100000 S IC EEPROM PLCC-32 SST39SF010-90 1 1 - - - U6
70
Page 71
==================== ========= ========== ====== ========== ========= ========== ========== ========= ======= ========= ========== ========= ====
QUANTITY REQUIRED DWG.NO. 451A78 REV. 1D
C NO. PART NO. DESCRIPTION SPECIFICATION ------------- ----- -------------------- --------- ---------
30 30
001 011 REMARKS
- ---- ----------- -------------------- ---- ------------------------ ------ --- --- --- --- --- ----- ----- ----- ----- ----- ----# 431A7830001 SMT CTRL/B VL-901 LCM999F
# 431A7830011 SMT CTRL/B VL-901 LAM999F
1 DA4M999V010 PCB CM999 VL-901 REV1 1 1 - - - ZZZ
2 SA008090600 S IC MCP809-2.93 SIT-23 RST 2.9V 1 1 - - - U7
3 SA010850500 S IC APL1085-33CE TO252-3 REG.3A 1 1 - - - U11
4 SA011170200 S IC APL1117-25 SOT-223 2.5V 1 1 - - - U12
5 SA011170300 S IC APL1117-33VC- TR SOT-223 3.3V 1 1 - - - U13
6SA024160008SMIC EE16KSO-8C 11---U5
7SA024210300SMIC EE128X8SOP-824LC21A 22---U1 U2
8SA051200100SIC GM5120PQFP-208 11---U4
9 SA063830000 S IC THC63LVDM83A TSSOP-56 LVDS 2 2 - - - U10 U9
10SA074140400SMIC SN74LVC14SOP-14INV. 11---U3
11 SB3241100T8 SM TRANSISTOR 2SC2411K (SOT-23) 1 1 - - - Q3
12 SB7390601T6 SM TRANSISTOR MMBT3906 (SOT-23) 2 2 - - - Q1 Q2
13 SBX94350109 SM TRANSISTOR SI9435 (SO-8) 1 1 - - - U8
14SC10QS041T4SMDIODE EC10QS04 33---D3 D4 D5
15 SC4LZ56B0T5 SM ZENER DIODE RLZ5.6B (LL-34) 6 6 - - - D1 D2 D6 D7 D8 D9
16SD0130000T4CHIPRES. 1/16W0+5%0603 44---R26R63R64R65
17SD0131001T6CHIPRES. 1/16W1K+-5%0603 S922---R27R70
18 SD0131002T3 CHIP RES. 1/16W 10K +-5% 0603 S9 14 14 - - - R1 R24 R25 R28 R31 R36
R37 R38 R39 R48 R57 R60
R66 R67
19SD0134700T1CHIPRES. 1/16W470+-5%0603 S955---R50R51R52R53R54
20SD0134702T5CHIPRES. 1/16W47K+-5%0603 S988---R2 R3 R4 R56R59R7
R8 R9
21SD013510009CHIPRES. 1/16W510+-5%0603 S911---R23
22SD013750AT3CHIPRES. 1/16W75+-5%0603 S955---R18R19R20R58R61
23 SD013820000 CHIP RES. 1/16W 820 +-5% 0603 - 1 - - - R55
24 SD014100009 CHIP RES. 1/16W 100 +-1% 0603 S9 12 12 - - - R12 R15 R21 R22 R5 R6
R62 R71 R72 R73 R74 R75
25SD014200A00CHIPRES. 1/16W20+-1%0603 33---R10R13R16
26 SD014562A00 CHIP RES. 1/16W 56.2 +-1% 0603 3 3 - - - R11 R14 R17
27SD302220A00CHIPNETWORKRES. 1/16W22+-5%8P-4R SA1212---RP1RP10RP11 RP12 RP2 RP3
RP4 RP5 RP6 RP7 RP8 RP9
28SE024100FT1CHIPCERAMICCAP. 10P50V+-1PFNPO0603 S811---C74
29SE024101JT8CHIPCERAMICCAP. 100P50V+-5%NPO0603 S811---C48
30SE024180Z01CHIPCERAMICCAP. 18P50VZNPO0603 33---C49C50C62
31SE024221JT3CHIPCERAMICCAP. 220P50V+-5%NPO0603 S822---C10C9
32 SE025103KT4 CHIP CERAMIC CAP. .01U 50V +-10% X7R 0603 S8 12 12---C3 C4 C5 C6 C7 C71
C73 C8 C80 C82 C88 C91
33 SE025471KT3 CHIP CERAMIC CAP. 470P 50V +-10% X7R 0603 S822---C63C64
34 SE027104NT0 CHIP CERAMIC CAP. .1U 16V -20+80% Y5V 0603 S8 64 64---C1 C101C11C12C120C13
C14 C15 C16 C17 C18 C19
7#
Page 72
==================== ========= ========== ====== ========== ========= ========== ========== ========= ======= ========= ========== ========= ====
QUANTITY REQUIRED DWG.NO. 451A78 REV. 1D
C NO. PART NO. DESCRIPTION SPECIFICATION ------------- ----- -------------------- --------- ---------
30 30
001 011 REMARKS
- ---- ----------- -------------------- ---- ------------------------ ------ --- --- --- --- --- ----- ----- ----- ----- ----- ----C2 C20 C21 C22 C25 C26
C27 C28 C29 C30 C31 C32
C33 C34 C35 C36 C37 C38
C39 C40 C41 C42 C43 C44
C45 C47 C51 C52 C53 C54
C55 C56 C57 C66 C67 C68
C69 C70 C72 C75 C76 C77
C78 C79 C81 C84 C86 C87
C93 C95 C98 C99
35SE053475Z05CHIPCERAMICCAP. 4.7U10VZY5V0805 -1---C58
36 SF02202M000 CHIP ELE. CAP. 22U 10V M A (4X5.4) 2 2 - - - C24 C46
37 SF04704M000 CHIP ELE. CAP. 47U 25V M B (6.3X5.4) CV-GS7 22---C102C61
38 SF1000340T2 CHIP ELE. CAP. 100U 16V M 85C (6.3X5.4) 9 9 - - - C100 C83 C85 C89 C90 C92
C94 C96 C97
39 SM010006300 CHIP EMI SUPPRESSOR MURATA BLM21P300S (0805) 77---L1 L2 L3 L4 L5 L6
L7
40 SM060000500 CHIP EMI SUPPRESSOR NWE STC222B 11---L8
41 SP02E002100 S W-CONN E&T 98210-4011 40P 1 1 - - - CN4
42SP070001600SSOCKET ACES85218-3200PLCC-32H=3.8311---&U6
End of Report
72
Page 73
5
4
3
2
1
J3
D D
SCJ-0345-1-X-S
2
5
1
2
5
1
C C
B B
PH1
BOTTOM VIEW
3
COLLECTOR
2SC2411K
SOT-23B
2
BASE
1
EMITTER
RIN
LIN
R1 22K
+12V
(To DC-DC)
MUTE_1
945
R2 22K
C1
470P
RIN_1
LIN_1
C2
470P
VR use 50K ohm
If have not mark, Res. and Cap. use 0805.
R10
5.1K
Q2
3
2
1
R5
5.1K
R6
3.3K
Q1
3
2
1
945
+
RIN_2
LIN_2
C13
470uF/16V
R7
51K
C15
0.047uF
R8
51K
C9
10uF/16V
C17
0.1uF
C16
0.047uF
+12V
(To DC-DC)
D1
EC10QS04
C4
0.1uF
C7
+
10uF/16V
+
C12
+
100UF/16V
1
9
3
8
+
U1
INV1
INV2
SVRR
MUTE
C3
1000uF/16V
SGND
2
R13 1 1206
R14 1 1206
1 2
L1 NC/1mH
C5 470uF/16V
+
TDA1517
SOT110B
7
VP
C6
OUT1
OUT2
5
4
6
R11
9.1K
PGND
C18
0.1uF
R12
9.1K
C14
0.1uF
C8 4.7uF/16V
+
C10 4.7uF/16V
+
C11 470uF/16V
+
R3 100
R4 100
LOUT
ROUT
L_EAR
R_EAR
LIN_2
RIN_2
RIN_1
LIN_1
MUTE_1
J2
11
10
9
8
7
6
5
4
3
2
1
E&T_96113_1103
0.01uF
A A
Title
FOR AM999 ONLY
5
4
3
2
SCHEMATIC, AUDIO&D/D BD. VM-902
Size Document Number Rev
B
405A78
Date: Sheet
23Friday, July 19, 2002
1
of
0B
Page 74
A
B
C
D
E
Q805
+12V
(To Audio AMP)
4 4
AGK
Q804
DTC124EK
3 3
L801
STC 471D
1 2
J801
DC-JACK
2
1
C801
104 16V
3
4
104 16V
C802
ZD802
6.2C
D806
1 2
R806
5.6k 0603 5%
*
R813
C803
470U/16V LOW-ES R
R815
47 0805
R816
4.7k 0805
1N4148
D805
+
C809
10U 50V 4X5.4mm
W803 P5
R801
0.1 2512
+
A
Q805
G
SCR
K
PAD
F801
SMD250(CM870 ONLY)
8
BST
7
IS
6
VCC
C804
104 16V
U801
AIC1563
J802
JST B4B-XH-A
123
4
D804
L802
100UH
R812
150 1206
ZD801
6.2C
+
C810
1000U/10V M B P5 L 1 5
R807
3.09K 1%
R808
1K 1%
L803
BLM21P300S
C807
472K
R809
220
C811
470U/10V M A P3.5 L15
C812
+
104
R811
D803
EC10QS04
150 1206
EC10QS04
1 2
C806
474 1206
D802
1N4148
C808
821K
C805
821K
R802
33
1
SC
2
SE
3
TC
45
GNDFB
SI4800
Q801
1 2
8
7
6
NS1
ND1
NS2
ND2
NS3
ND3
1 2
D801
1N4148
R803
1K
R804
470K
1
2
3
45
NGND4
2
1
3
Q802
2SA1036K
R805
470K
1 2
2 2
1 1
Title
SCHEMATIC, AUDIO&D/D BD. VM-902
Size Document Number Rev
A3
405A78
A
B
C
D
Date: Sheet
33Friday, July 19, 2002
E
0B
of
Page 75
!!M-id!ART"!
MANUAL!ser vice!AB
==================== ========= ========== ====== ========== ========= ========== ========== ========= ======= ========= ========== ========= ====
QUANTITY REQUIRED DWG.NO. 455A78 REV. 0C
C NO. PART NO. DESCRIPTION SPECIFICATION ------------- ----- -------------------- --------- ---------
30 30
001 021 REMARKS
- ---- ----------- -------------------- ---- ------------------------ ------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
# 455A7830001 PCBA AUDIO&D/D BD. VM-902 LCM999F 0C
# 455A7830021 PCBA AUDIO&D/D BD. VM-902 LAM999F 0C
1 445A7830001 AIS AUDIO&D/D BD. VM-902 LCM999F 1----ZZZ
2 445A7830021 AIS AUDIO&D/D BD. VM-902 LAM999F -1---ZZZ
3AB015170002IC TDA1517SIL-9AUDIOAMP. -1---U1
4AB080510100IC SI-8051SLF1102 11---U801
5CB10012M100CAPACITOR 1000U10VMBP5L10.5(L-ESR)11---C810
6 CB10013M310 ELE CAP 1000U 16V M B P5 L10.5 - 1 - - - C3
7 CB47003M205 CAPACITOR 470U 16V M A P3.5 - 3 - - - C11 C13 C5
8CB47003M300CAPACITOR 470U16VMBP5L10.5(L-ESR) 11---C803
* 9CL310012100CHOKCOIL CM99956uHK10X8X535.5TS 11---L802
10 DC020200460 H-CON SET AM999 J804-SW -1---&J804
11 DC030000110 WAFER JST B2P3S-VH 3.96 90D W/O PIN2 - 1 - - - J804
12 DC03E002600 WAFER E&T 4500-07 7P P2.0 1 1 - - - J803
13 DC03E002640 WAFER E&T 4500-12 12P P2.0 1 1 - - - J802
14 DC03E002650 WAFER E&T 4500-11 11P P2.0 - 1 - - - J2
15 DC150001204 BEAD BL02RN2-R62 (MURATA) 1 1 - - - L801
16 DC230201200 CONNECTOR SC SCJ-0345-1-X-S 3.6D -1---J3
17 DC231100300 CONNECTOR SC SCD-014-1 PIN2.0 6.3D JACK 1 1---J801
18 ECCM9943000 DC-DC HEAT SINK CM9943 11---H801
* 19 EECM9923000 INVERT SHIELD CM9923 1 1 - - - ZZZ
20 MAA70007209 SCREW M3X0.5+10 P-NI & WASHER DIM 6 11---&H801
21MD2T0001109NUT ITT701453-101M3XB5.5XH1.8-NI11---&H801
*22PK07V000100INVERTER CM99919"T51I058.00AMBIT 11---ZZZ
75
Page 76
==================== ========= ========== ====== ========== ========= ========== ========== ========= ======= ========= ========== ========= ====
QUANTITY REQUIRED DWG.NO. 455A78 REV. 0C
C NO. PART NO. DESCRIPTION SPECIFICATION ------------- ----- -------------------- --------- ---------
30 30
001 021 REMARKS
- ---- ----------- -------------------- ---- ------------------------ ------ --- --- --- --- --- ----- ----- ----- ----- ----- -----
# 445A7830001 AIS AUDIO&D/D BD. VM-902 LCM999F
# 445A7830021 AIS AUDIO&D/D BD. VM-902 LAM999F
1BB30945P1T5TRANSISTOR 2SC945-P -2---Q1 Q2
2 BC1SB1401T0 DIO SB140 DO-41 PANJIT - 1 - - - D1
3 BC1SB2400T0 DIO SB240 DO-15 PANJIT 2 2 - - - D803 D804
4BC40HZ6B2T7ZENERDIODE HZ6B-2 11---ZD801
5 CA001A601T8 CERAMIC CAP. .1U 50V Z Y5V P5 - 4 - - - C14 C17 C18 C4
44---C801C802C804C805
6 CA001B631T8 CERAMIC CAP. .01U 50V -20 +80% Z5V P5 -1---C6
7 CA047C6Z0T0 CERAMIC CAP. .047U 50V Z Y5V P5 - 2 - - - C15 C16
8CA047D601T2CERAMICCAP. 470P50V+-5%Z5PP5 -2---C1 C2
9CB0100341T4CAPACITOR 10U16VMBP5 -2---C7 C9
10 CB047A442T1 CAPACITOR 4.7U 25V +-20% 85C P5 -2---C10C8
11 CB1000341T3 CAPACITOR 100U 16V M B P5 - 1 - - - C12
12 CC0010211T0 RESISTOR 1/8W 1 +-5% S1 - 2 - - - R13 R14
13 CC1000211T8 RESISTOR 1/8W 100 +-5% S1-2---R3 R4
14 CC2202225T0 RESISTOR (M.F.) 1/8W 22K +-1% S2 -2---R1 R2
15 CC3301211T4 RESISTOR 1/8W 3.3K +-5% S1 - 1 - - - R6
16 CC5101211T2 RESISTOR 1/8W 5.1K +-5% S1 - 2 - - - R10 R5
17 CC5102211T7 RESISTOR 1/8W 51K +-5% S1-2---R7 R8
18 CC9101211T0 RESISTOR 1/8W 9.1K +-5% S1 - 2 - - - R11 R12
19 DA1M988P001 PCB CM988 VM-902 REV0E 1 1 - - - ZZZ
20DC1510009T0BEAD NWEW53.5X6X1.0+T 11---L803
21XX0900T1180JUMPWIRE 1BX*10000PCS52MM 44---W1 W2 W4 W5
2----W10W6
-2---W3 W9
End of Report
76
Loading...