Acer AL2016W User Manual

Acer LCD Monitor Quick Start Guide (QSG)

Connecting Your Monitor to a Computer

Turn off your computer and unplug your
computer's power cable.

Connect the VGA cable's connectors to the
monitor's signal connector and video

connector on the back of your computer.

Assembly Your Monitor with Monitor Base

Take out the monitor base from monitor box and place
on a stable and level workspace.

Take out your monitor and assembly with the base.
Make sure you heard click sound

VGA Cable

DVI Cable (option)

Power Cord

English

Important Safety Instructions

Please read the following instructions carefully.

manual should be retained for future use.

This

1. To clean LCD Monitor screen;

-- Power off

-- Spray
clean

2. Do
Exposing the monitor to rain water,
moisture

3. Do not apply pressure to the LCD screen.
Excess pressure may cause permanent damage

the display.

to

4. Do not remove the cover or attempt to service this unit
by yourself. Servicing of any nature should be performed
by

5. Operate LCD Monitor in a room with a room temperature
of 5

outside this range could result in permanent damage.

any of the following occurs, immediately unplug your

6. If
monitor

* Monitor to PC signal cable is frayed or damaged.
* Liquid spilled into LCD Monitor or the monitor has been

e

* LCD Monitor or the case is damaged.

LCD Monitor and unplug the AC Cord.

a non-solvent cleaning solution onto a rag and

the screen gently.

not place the LCD Monitor near a window.

or sunlight can severely damage it.

an authorized technician.

°C~ 40°C (or 41°F ~ 104°F). Operating LCD Monitor

and call an authorized technician.

xposed to rain.

Operating Your Monitor

1

AUTO

<

2

>

3

4

MENU

5

Auto

Configuration

Minus

OS

D Menu

Power

Plus

Package Contents

If OSD is active, press to exit. If OSD is

ve,

inacti

and themonitor will automatically

press

the display position,

optimize

and phase of your display.

clock

If OSD is active, press to select or

OSD options.

adjust

If OSD is active, press to select or

OSD options.

adjust

view OSD. Press AUTO to exit.

Press to

Power

on/off

power on

Green:

in sleep mode

Orange:

Option: Connect the DVI cable's connectors to
the monitor's signal connector and video

connector on the back of your computer.

Insert the monitor power cable into the power

on the back of the monitor.

port

Plug the power cables of your computer and
your monitor into a nearby electrical outlet.

Turn on your computer and monitor.

LCD Monitor

Power

Cord

Use

r Manual

Quick

Start Guide

VGA

Cable

DVI Cable (option)

(CD)

(CD)