Accurist 7243.01 Instruction manual

Instruction Guide

and

2 year Guarantee

M02

Congra tulations on purchasing a ACCURIST mechanical watch.
T his watch is sty led and cr afted using tr aditional techniques and
mechanisms. P lease ensure that thi s delicate ti mepiece is handled
with care to ensure years of troubl e free service.

SER V IC E A ND R E PAI R S

Y our ACCURIST watch is guaranteed against defects in materials
and wor kmanship for a period of 2 years from the date of
purchase. Duri ng this peri od, w e will exchange or repair,
at our discretion, any defective components.

IM PO

R T AN T – N ot covered by G uarantee

1. Straps a nd bracelets.

2. Damage caused by accident, misuse or lack of care.

3. Wa ter penetration ex cept in w atches mark ed
as “ W ater R esistant” .

SER V IC I NG A N D R EPA IR S UN D ER G U AR A NT E E

Please post y our w atch, together w ith the R etailer ’s Sal es R eceipt
or P roof of Pur chase, the compl eted Guara ntee slip, and a brief
note to ex plain the nature of the faul t, by R egistered Post
R ecorded Delivery to the address shown. D o not send the
presentation box as this wi ll not be returned.

SER V IC I NG A N D R EPA IR S OU T SID E O F G U AR A NT E E

Avai lable at a r easonable charge after an estimate has been
sent by T.P. (UK) Ltd. Send y our w atch to us by R egistered Post
or R ecorded D elivery to the address shown.

Importa nt N ote

It is impor tant to identify your watch cor rectly.
If, after reading thi s Instr uction G uide, you hav e any f urther
questions regarding the use, operati on or adjustment of your
watch, please call us duri ng office hours on 0116 28 8 25 00.

or

WA T E R R ESI ST AN C Y

If your watch i s water resistant, it will clearly state
“ Water R esistant” or have a static water pr essure
indication (eg “ 30/50/10 0 metres” ) on the dial and/or
case back.
If it i s N O T mark ed as wa ter resistant, it should not be
allowed to come into contact w ith w ater or be wor n in
conditions that could expose it to moistur e (eg washing,
heavy ra in etc). C ertain chemical s in water may
damage the watch seals. T o maintain its w ater
resistance, w e recommend that your w atch is serviced
and re-sealed a t least every 12 months by T.P. (UK) Ltd.

IM PO R T AN T Buttons must not be operated while in
contact wi th water.

WA T E R R ESI ST AN T or RE SIST AN T
T O 30 M ET R E S

Suitable f or nor mal everyday use and will resist
exposure to splashes and rain; it is N O T designed
to be used w hile bathing or sw imming.

WA T E R R ESI ST AN T T O 50 M ET R E S

As 30 metr es plus bathing or sw imming.

WA T E R R ESI ST AN T T O 100 M ET RE S

As 50 metr es plus poolsi d
but N O T highboard or scuba diving.

e diving and snork elling,

OP ER AT IN G AN D A DJU ST IN G Y O UR WA T C H :
Importa nt N ote: O ther than for self-wi nding (automati c)

watches, mechanica l watches should be f ully (re-) wound
every 24 hours.

WI N DI N G:

T o be fully functional , self winding w atches need to be worn on a
daily basi s as once removed from the wr ist the movement w ill
need re-winding a fter a period of approx . 30 hour s.

AC C UR A CY :

T he precision o f self-w inding mechanical watches
compared with the ex treme accur acy of battery powered qua rtz
watches. Dail y va riations of up to 30 seconds cannot be avoided
and can accor dingly add up ov er a period of days. We suggest you
reset the time on a r egular basis.

M EC H AN I CA L DA T E & N ON -D AT E :
WI N DI N G UP:

• W ith S1 in position ‘A’ turn clock wise until full y wound.

T IM E SE T T IN G : NO N -D AT E :

• Pull S1 out to position ‘ B’.

• T urn S1 to advance

• R eturn S1 to position ‘ A’ .

M EC H AN I CA L DA T E W AT C H :
DA T E AN D T I M E SET T I N G:

• Pull S1 out to position “ B ”
and advance hands until
date changes.
T urn hands back to 8 o’clock .

• R epeat until correct date shown.

• W hen correct date is show n,
advance hands to corr ect time.

• R eturn S1 to position ‘ A’ .

hands.

cannot be

SEL F-W I ND IN G ( AU T OM A T IC ) DA T E W AT C H :

T o start, turn the S1 clockw ise a f ew turns to positi on ‘A ’. T he
movement of the wrist will ensure that the watch remains
wound w hilst i n use.

T IM E SE T T IN G :

• Pull S1 out to position ‘ C’ and advance hands to
correct ti me (A M /PM).

• R eturn S1 to posi tion ‘ A’ .

DA T E SET T IN G:

• Pull S1 out to position “ B ” .

• T urn anti-clock wise to set correct date.

• R eturn S1 to posi tion ‘ A’ .

N O

T E: Do not operate this functi on between 10. 30pm a nd

1.00 am as date change cycle i s in progress.

Gu arantee

Block C apitals

N ame

Addr ess

Post C ode

Date of Pur chase

R etailers Sta mp if required or ful l name a nd address

Day time P hone

For free br acelet adjusting servi ce, return the watch
to the address below.

S1

S1

For maxi mum protection,
in its presentation box w hen not i n use.

T.P. (UK ) L td., Alex ander H ouse, C hartw ell D rive,
W igston, L eicester L E18 2E Z

Impor tant

T his guarantee sl ip should be retained by the owner of
the product and should only be sent to T.P. (UK) Ltd
together with the product and £6. 00 to cover handling
and postage when service under guarantee is r equired.
Please refer to servi ce and r epairs under guarantee f
further infor mation on service under guarantee. T his
guarantee does not affect your statutor y ri ghts.

please keep your watch

Attach R eceipt or P roof of Pur chase;
fail ure to attach may invali date guarantee.
T his guaran tee does not affect

or

your statutory rights.

M02 05/02/2019

SEL F-W I ND IN G ( AU T OM A T IC ) DA Y /DA T E W AT C H :

T IM E SE T T IN G :

• Pull S1 out to position ‘ C’ and advance hands to
correct ti me (A M /PM).

• R eturn S1 to position ‘ A’ .

DA Y /DA T E SE T T IN G :

• Pull S1 out to position “ B ” .

• T urn anti-clock wise to set correct date.

• T urn clockwi se to set cor rect day.

• R eturn S1 to position ‘ A’ .

N OT E : D o not operate this function between 9.00pm and

6.00 am as date change cycle i s in progress.

Pleas

e note that at the end of months with less than 3 1 days, the

date must be set manually.

S1

SEL F-W I ND IN G ( AU T OM A T IC ) M ON T H , DA Y , D A T E
& 24 HO U R D ISPL AY WA T C H:

Month display

Day display

WI N DI N G T HE M O V EM E N T :

When S1 i s in the normal position ‘A ’ the mov ement can be
wound by hand. A few tur ns wil l star t the movement r unning,
but it is adv isable to wind the movement fully by tur ning S1
clockw ise for approx imately 2 0 times. T he movement
power r eserve of about 30 hours a fter the w atch is removed
from the wri st. T he movement of the wr ist wi ll ensure that the
watch r emains wound whilst in use.

SET T I N G T H E T IM E :

• Pull S1 out to position ‘ C’

• T urn S1 A N TI -clock wise.

• C ontinue to turn unti l the ha nds
show the correct ti me.

• R eturn S1 to position ‘ A’ .

N B: When setting the time the
24 hour di splay adva nces in
conjunction with the hands,
i

.e. 12 M i dnight = 24 .00 hours.

PB1

A B C

PB2

24 hour

display

S1

Date

then has a

PB1

A B C

S1

PB2

SET T I N G T H E DA T E:

• Pull S1 out to position “ B ” .

• T urn S1 A N TI -clock wise until corr ect date is set.

• R eturn S1 to position ‘ A’ .

If the time i s set corr ectly the date will change at mi dnight
and not at 12 noon.

N OT E : D o not operate this function between 9.00pm and

6.00 am as date change cycle i s in progress.

Please note that at the end of months with less than 3 1 days, the
date m

ust be set man ually.

M ON T H DIS PLA Y :

• Press pusher PB1 to set the correct month.

N B: The month display does not change automaticall y, a nd must
be set manuall y at the start of a new month.

DA Y D ISPL AY :

• Press pusher PB2 to set the correct day of the week.

• O nce set the day will change automatical ly.

M EC H AN I CA L ‘T W O -EY E ’ D A Y & DA T E W AT C H :

T o start, turn the S1 clockw ise a f ew turns. T he movement
of the wrist will ensure that the watch remains w ound
whilst in use.

T IM E SE T T IN G :

• Pull S1 out to position ‘ B’

• T urn S1 to advance hands.

• R eturn S1 to position ‘ A’ .

DA T E SET T IN G:

Using the tip of a bal lpoint pen or si milar item.

• Push the centre of the (Interna l Pusher) IP 1 to advance
the hand to t

he correct date.

DA Y C H AN G E:

Using the tip of a bal lpoint pen or si milar item.

• Push the centre of the (Interna l Pusher) IP 2 to advance
the hand to the corr ect day.

S1

IP2

IP1