Accton WA6202M, WA6202 Datasheet

WA6202/WA6202M Dural-Band Enter­prise Outdoor Bridge Access Point

Safeguarding

The Accton WA6202/WA6202M supports up-to­date WLAN security with 64/128 and 152-bit WEP
encryption. WPA (Wi-Fi protected Access) TKIP and
AES are also available for Acess Point functions for
enhanced, interoperable, forward-compatible Wi-Fi
security. Includes MAC address authentication.
The Static AES encryption function is supported for
outdoor bridge packet transmission.

Uncomplicated

The Accton WA6202/WA6202M is simple to install
and use and is easy on your budget. Dynamic rate
shifting automatically matches the best connection
speed, and Auto Network Connect keeps users con­nected to the network, even while roaming.

Intelligent

The Accton WA6202/WA6202M supports Simple
Network Management Protocol SNMP is available
with a future fi rmware upgrade. Power over Ethernet
is supported with stuffi ng option PoE circuit. 802.1x
port-based authentication protocol support with
Extensible Authentication Protocol (EAP) MD5,
Transport Layer Security (TLS), Protected EAP
(PEAP) and Tunneled TLS (TTLS) for AP function.
For the bridge function, a mutual authentication
between any two bridge APs are supported through
EAP MD5 protocol.

T

he Accton WA6202/WA6202M, 802.11a+b/g dual band wireless outdoor bridge AP, provides
a band for wireless connection to support point to point building-to-building bridge function

while simultaneously using another band to support wireless connection for outdoor user access.

The bridge function of Accton WA6202/WA6202M provides a 802.11a or 802.11b/g wireless con­nection to support data rate up to 108 Mbps that is best suited for enterprises, campus or off-site
locations that require LAN or Internet access without the availability of wired networks to extend
the network coverage. The WA6202/WA6202M provides point to point and point to multi-point
connection. For point to multi-point connection, WA6202 needs to have WA6202M as a base
station.

The AP functions of Accton WA6202/WA6202M also support 802.11b/g wireless connection for
outdoors user. The wireless bridge/AP solution contains a state of the art wireless Bridge/AP,
high gain performance 17dBi fl at panel antenna for 802.11a or 802.11b/g backbone connection
and a 10dBi omni-directional antenna for outdoor wireless user connection. For further protec­tion, the bridge/AP and Power over Ethernet adapter have build in lightning protector.

Features and Benefi ts

Management FeaturesEthernet Interface Features

● Supports 1 10/100BASE-T/TX compatible with
IEEE802.3

● Minimum of four encryption keys

● Accepts power from POE (Power Over
Ethernet) and power adapter (IEEE 802.3af
standard)

● Supports half and full duplex mode
10/100Mbps speed for Ethernet port

● DHCP Client

● QoS

● Support Default VLAN, Up to 64 (VLAN ID)

● Web Interface

● Telnet, CLI

● Support SNMP

● Event Logging

● Syslog RFC 3164

● Supports DHCP client for IP address assign­ment

● Confi guration fi le upload/download

● System Watchdog

Wireless Network Standard

● Interoperable with IEEE 802.11a compliant
equipment

● Auto data rate switching with
6,9,12,18,24,36,48,54 and turbo mode provided
by Chipset allows auto fallback data rate for
optimized reliability, throughput and transmis­sion range.

● Fixed data rate is set through management
interface

● Supports fi xed antenna

● Auto-Channel Selection

● Advanced Setting

Transmitting power
Five Levels: Full, -3dB(50%), -6dB(25%),

-9dB(125%), MIN
Threshold
RTS/ CTS, Fragmentation

● Selectable long or short preamble

● Selectable Beacon Interval

● Selectable DTIM Interval

● Roaming support IAPP 802.11f

● WDS Bridge (AP to AP) : PtP, PmP(WA6202M)

Security Features

● 802.1x Authentication Access Control with Key
Rotation

● WEP security - 64/128/152 bit

● Local MAC address fi ltering

● Radius Client support

● ACL

● WPA and AES

● Close System

MIB Support

● RFC1213 MIB-2

● Accton Private MIB

Hot Spot

● Prevents communication among wireless
clients

● Ethernet Type Filtering

● Local Management Filtering

● PPPoE

● RADIUS Attributes

Specifications

Electrical

● Radio: Complies with IEEE 802.11a/b/g

● Frequency Band

IEEE 802.11a

5.15 ~ 5.25GHz (lower band) for US/Canada, Japan

5.25 ~ 5.35GHz (middle band) for US/Canada

5.725~ 5.825GHz (upper band) for US/Canada

5.50~ 5.70GHz for Europe

IEEE 802.11b/g

2400 ~ 2483.5 MHz for US, Canada, and ETSI

2400 ~ 2497MHz for Japan

● Modulation TYPE

IEEE 802.11a

BPSK, QPSK, 16-QAM, 64-QAM

IEEE 802.11b/g

CCK, BPSK, QPSK, OFDM

● Data Rates

IEEE 802.11a

6/9/12/18/24/36/48/54 Mbps Up to 108Mbps (turbo mode)

IEEE 802.11b/g

1/2/5.5/11 (11b) Mbps

6/9/12/18/24/36/48/54 Mbps (11g)

● Power Adapter: Input 5V DC, 3A

● Power over Ethernet: Standard IEEE 802.3af, Input voltage 48V

● Ethernet: Ethernet IEEE 802.3/ 802.3u 10/100 Mbps

● Transmit Power: 15~20dBm

● Antenna: Fixable Antenna

Operating Channels

● IEEE 802.11a

12 channels in base mode (US, Canada)

5 channels in turbo mode (US, Canada)

4 channels (Japan)

11 channels in base mode (Europe)

4 channels in turbo mode (Europe)

● IEEE 802.11b/g

11 channels in base mode (US, Canada)

3 channels (ETSI)

4 channels (Japan)

Regulatory Compliance

● Safety: CSA/NRTL (UL1950, CSA 22.2.950), TUV/GS (EN60950)

● Electromagnetic Compatibility: CE mark, FCC Class B, CISPR Class B

Environmental

● Operating Temperature: ETS 300 019-2-4 Class 4.1E modified –33°C to 55°C. Vibration class 4M3 ETS 300

019-2-4 Class 4.1E modified –33°C to 55°C. Vibration class 4M3

● Transportation Environment : ETS 300 019-2-2 Class 2.3 Pubic Transportation

● Storage Temperature: 0°C ~ 70°C ambient

● Humidity: Max. 95%

Coverage Range

● Up to 3 km@54Mbps, with Build in +17 dBi Antenna

* future specification

4.2005 V.01