Abocom HSM1402 User Manual

HSM1402

Manageable 14-port HomePNA Plus 2 Fast Ethernet Switch

INTRODUCTION

The manageable 14-port HomePNA Switch is a device utilizing the existing telephone wiring within a building to deliver data and does not interrupt regular voice services. Data and voice run simultaneously on the same pair of wire without any rewiring. It is suitable for hotel/motel, multi-tenant apartment, multi-tenant commercial, multi-tenant student dorm, campus and local loop. This switch supports a concentrator mode, where each of the ports is dedicated to directly communicate with the Uplink/downlink ports. This mode ensures that data from any of ports 1-14 cannot be directly seen by another port. This feature, therefore, provides data privacy to subscribers.

LINE1

PNA1

LINE3

PNA3

LINE5

PNA5

LINE7

PNA7

LINE9

PNA9

LINE11

PNA11

LINE13

PNA13

HomePNA

100

UPLINK

1

3

5

7

9

11

13

(Management)

Console

LINK/

Power

2

4

6

8

10

12

14

100

DOWNLINK

LINK/

Warning

LINE2

PNA2

LINE4

PNA4

LINE6

PNA6

LINE8

PNA8

LINE10

PNA10

LINE12

PNA12

LINE14

PNA14

EtherNet

The manageable 14-port HomePNA Switch is designed to eliminate unnecessary network traffic, and relieve congestion by delivering dedicated bandwidth for each of the ports. Able to begin operating after power-up, the switch will learn addresses automatically, and begin forwarding packets at full wire-speed to any of the outputs. Additionally, this switch comes with the full network management functions such as SNMP, Web-browser, Telnet, Windows GUI tool and Local Console management. Moreover, the switch can be operated stand-alone or can be cascaded to stack up with multiple units to provide low cost network solutions.

SPECIFICATIONS

Network Connection

Totally 14 HomePNA 1.1 ports, each port has 2 RJ-11 connectors

One has built-in low-pass filter for PBX/PSTN connection

The other is passing-through for HomePNA client connections

The transmitting power for each HomePNA port can be adjusted

The receiving threshold for each HomePNA port can be adjusted

2 10/100 Fast Ethernet ports

Compliant with IEEE802.3/802.3u, 10/100BASE-TX standard

Full Duplex supported

IEEE 802.3x compliant Flow Control supported for full-duplex

Advanced MDI/MDIX auto crossover feature

1 Console port for out-of-band management

Switching and Management Function

Switching functions

Layer 2 switching based on MAC address Store and Forward packet switching Broadcast Storm rate filtering

8K MAC address table supported

Port-based VLAN supported(up to 14 VLAN groups) Overlapping VLAN supported

Management functions

SNMP MIB I management agent supported

Windows GUI configuration/management program supported

Local console management supported

Telnet management supported

Web management supported

- 1 -

HSM1402

Manageable 14-port HomePNA Switch

Management item list Port enable/disable Port status monitor

Transmitting power control for each port Receiving sensitivity control for each port VLAN configuration

Transmit/Receive Counters

Mechanic & ID Design

Nameplate design

LED indicators

Each HomePNA port: Link/Act

Fast Ethernet Port: Link/Act, 100M

Power, Warning

Case

1U height, metal case

19-inch, 1U size

1 build-in 40X40 mm fan

Physical & Environmental

AC input

100 - 240 VAC, 50/60 Hz Internal universal power supply

Operating temperature

0 - 50 °C

Storage temperature:

-25 - 55 °C

Humidity

- 5% - 95%, non-condensing

Power consumption:

22.5W Maximum

EMC certifications:

FCC part 15 class A

PTT certification

FCC part 68

- 2 -